Search NASA⌕ Search

SEARCH · Search NASA

Results for “mechanical efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Increasing the Carbohydrate Output of Bamboo Using a Combinatorial Pretreatment

Bamboo represents a family of highly lignified biomass with significant resistance to cellulolytic enzyme degradation, and typically, a severe thermochemical pretreatment is needed to overcome its recalcitrance for producing fermentable sugars. Combinatorial pretreatments with a low holding temperature and low alkali dosage were investigated in this study in an attempt to remove the impediments to the accessibility of bamboo cellulose to enzymes and enable the efficient conversion of hemicellulose. Upon autohydrolysis at 180 °C, more than half of the hemicellulose (~58%) was solubilized, contributing to further delignification in the subsequent dilute alkali extraction (DAE). The solubilized hemicellulose mainly existed in the form of soluble xylan, which, after a novel endo-β-1,4-xylanase hydrolysis, generated a large amount of xylo-oligosaccharides with the xylobiose and xylotriose proportion reaching 72.99%. After the fractionation with combinatorial pretreatments, cellulose and xylose enzymatic hydrolysis yields were 73.36 and 86.98%, respectively, representing increments of 22.42 and 43.15% compared with the sole autohydrolysis process. Fluorescence microscopy (FM) and confocal Raman microscopy (CRM) images revealed that these dramatic improvements were caused by the deconstruction of the bamboo cell walls, including separation of the adjacent cell walls, removal of hemicellulose and lignin, migration and redistribution of lignin, and the increased exposure of cellulose. In addition, lignin chemical structure variations during the combinatorial pretreatment were analyzed with gel permeation chromatography (GPC), 2D HSQC NMR, and 31 P NMR, and the correlation between the lignin structure and enzymatic hydrolysis efficiency was investigated. In summary, this study highlighted the application of combinatorial pretreatments to maximize the carbohydrate output of bamboo and unveiled their mechanism that enabled the high-efficiency utilization of bamboo.

09 BIOMASS FUELS↗
DOE OSTI2023

Oxygen Management to Avoid Photo-Inactive Cd(S,Se) for Efficient Cd(Se,Te) Solar Cells

Our previous work has demonstrated that the formation of a penternary cadmium chalcogenide Cd(O,S,Se,Te) region can significantly reduce the front interface recombination in Cd(Se,Te)-based thin-film solar cells. In this work, we have shown that oxygen management during the device fabrication is crucial to form this region. While both the CdS and CdSe layer depositions and the postdeposition CdCl2 treatment should be conducted in the presence of oxygen, the CdTe deposition should be conducted in an oxygen-free atmosphere. Improper oxygen management leads to low device performance due to the formation of a photoinactive Cd(S,Se) region and reduced absorber quality. Additionally, we investigated the carrier transport and collection properties in devices with photoinactive Cd(S,Se) and photoactive Cd(O,S,Se,Te) at the front interface to gain comprehensive understanding of the mechanisms that resulted in improved efficiencies approaching 20%.

CdTe deposition↗
DOE OSTI2023

Strategies to improve the mechanical robustness of metal halide perovskite solar cells

We report on the mechanical properties of high-efficiency perovskite solar cells (PSCs) with different chemical components by measuring the fracture energy (G c ) of films and devices. With the help of both macroscopic and microscopic techniques, we identify the locations where fracture takes place in the devices (either adhesive or cohesive failure) with various material and device structures. We propose strategies that can improve the fracture energy of PSCs based on the measured G c : the use of ozone-nucleated atomic layer deposition to improve charge transport layer robustness and the use of 2D perovskites and morphology control to improve the perovskite robustness. Our findings offer a pathway to rationally study the mechanical properties of PSCs and enable such cells to be more mechanically robust to reach commercial viability.

14 SOLAR ENERGY↗
DOE OSTI2026

A Chemocatalytic Route to Stereoregular Poly(3-hydroxyhexanoate) and Its Statistical and Tri-Block Copolymers

Poly(3-hydroxyhexanoate) (P3HHx)-based poly(3- hydroxyalkanoate)s (PHAs) are biologically produced, commercially implemented PHAs, but little is known in the open literature about the structure and property characterizations of discrete, authentic homopolymer P3HHx, and its copolymers with poly(3- hydroxybutyrate) (P3HB). Here, we introduce a chemocatalytic route to stereoregular (both isotactic and syndiotactic) P3HHx and PHA copolymers with P3HB, including statistical copolymer P3HBHx with various levels of 3HHx incorporation and discrete hard−soft−hard triblock copolymer P3HB-b-P3HHx-b-P3HB, and present extensive characterizations of their structures, thermal properties, and mechanical performance. The synthesis is efficiently achieved by one-pot polymerization of eight-membered di(n-propyl) and dimethyl (for copolymerization) diolides catalyzed by chiral molecular catalysts. Notably, P3HBHx can be rapidly produced in quantitative yield and exhibits high molar mass (M n up to 551 kg/mol) as well as both high modulus (up to 1.39 GPa) and ductility (up to 445%), while P3HB-b-P3HHx-b-P3HB further extends application temperature windows by possessing a unique combination of low T g (−18 °C) and high T m (154 °C) values. These findings highlight the stereomicrostructural and architectural versatility of chemocatalytic routes to PHAs, which, in turn, can be utilized to largely tune the PHA thermal properties and mechanical performance.

Biopolymers↗
DOE OSTI2020

An efficient Chlorella sp.-Cupriavidus necator microcosm for phenol degradation and its cooperation mechanism.

In this work, a Chlorella sp.-Cupriavidus necator (C. necator) microcosm was artificially established for phenol degradation. Additionally, the cooperation relationship between Chlorella sp. and C. necator was initially demonstrated, and then the effects of Chlorella sp./C. necator inoculation ratio, light intensity, temperature and pH on the performance of this microcosm were systematically evaluated and optimized. The optimal conditions for phenol degradation were as follows: a Chlorella sp./C. necator inoculation ratio of 1:1, a light intensity of 110 μmol m -2 s -1 , a temperature in the range of 25-32 °C and a pH in the range of 5.5-7.5. Under optimal conditions, this microcosm could degrade phenol with a maximum concentration of 1200 mg L -1 within 60 h. It was found that only when the phenol concentration was reduced to the tolerance concentration of microalgae, that is, the last stage of phenol degradation, the cooperation effect could be generated, indicating that the tolerance of microalgae to phenol may be more important than its degradation performance. Comparative transcriptomic analysis was conducted to discuss the cooperation mechanism of this microcosm subject to high phenol concentrations. The up-regulation of genes involved in photosynthesis and carbon fixation of Chlorella sp. demonstrated the CO 2 and O 2 exchange between Chlorella sp. and C. necator and their cooperation relationship. This study suggests that this microcosm has great potential for the bioremediation of phenol contaminants.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Neutron scattering maps the higher-order assembly of NADPH-dependent assimilatory sulfite reductase

Precursor molecules for biomass incorporation must be imported into cells and made available to the molecular machines that build the cell. Sulfur-containing macromolecules require that sulfur be in its S2- oxidation state before assimilation into amino acids, cofactors, and vitamins that are essential to organisms throughout the biosphere. In α-proteobacteria, NADPH-dependent assimilatory sulfite reductase (SiR) performs the final six-electron reduction of sulfur. SiR is a dodecameric oxidoreductase composed of an octameric flavoprotein reductase (SiRFP) and four hemoprotein metalloenzyme oxidases (SiRHPs). SiR performs the electron transfer reduction reaction to produce sulfide from sulfite through coordinated domain movements and subunit interactions without release of partially reduced intermediates. Efforts to understand the electron transfer mechanism responsible for SiR’s efficiency are confounded by structural heterogeneity arising from intrinsically disordered regions throughout its complex, including the flexible linker joining SiRFP’s flavin-binding domains. As a result, high-resolution structures of SiR dodecamer and its subcomplexes are unknown, leaving a gap in the fundamental understanding of how SiR performs this uniquely large-volume electron transfer reaction. In this work, we use deuterium labeling, in vitro reconstitution, analytical ultracentrifugation (AUC), small-angle neutron scattering (SANS), and neutron contrast variation (NCV) to observe the relative subunit positions within SiR’s higher-order assembly. AUC and SANS reveal SiR to be a flexible dodecamer and confirm the mismatched SiRFP and SiRHP subunit stoichiometry. NCV shows that the complex is asymmetric, with SiRHP on the periphery of the complex and the centers of mass between SiRFP and SiRHP components over 100 Å apart. SiRFP undergoes compaction upon assembly into SiR’s dodecamer and SiRHP adopts multiple positions in the complex. The resulting map of SiR’s higher-order structure supports a cis/trans mechanism for electron transfer between domains of reductase subunits as well as between tightly bound or transiently interacting reductase and oxidase subunits.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Root angle is controlled by EGT1 in cereal crops employing an antigravitropic mechanism

Root angle in crops represents a key trait for efficient capture of soil resources. Root angle is determined by competing gravitropic versus antigravitropic offset (AGO) mechanisms. Here we report a root angle regulatory gene termed ENHANCED GRAVITROPISM1 ( EGT1 ) that encodes a putative AGO component, whose loss-of-function enhances root gravitropism. Mutations in barley and wheat EGT1 genes confer a striking root phenotype, where every root class adopts a steeper growth angle. EGT1 encodes an F-box and Tubby domain-containing protein that is highly conserved across plant species. Haplotype analysis found that natural allelic variation at the barley EGT1 locus impacts root angle. Gravitropic assays indicated that Hvegt1 roots bend more rapidly than wild-type. Transcript profiling revealed Hvegt1 roots deregulate reactive oxygen species (ROS) homeostasis and cell wall-loosening enzymes and cofactors. ROS imaging shows that Hvegt1 root basal meristem and elongation zone tissues have reduced levels. Atomic force microscopy measurements detected elongating Hvegt1 root cortical cell walls are significantly less stiff than wild-type. In situ analysis identified HvEGT1 is expressed in elongating cortical and stele tissues, which are distinct from known root gravitropic perception and response tissues in the columella and epidermis, respectively. We propose that EGT1 controls root angle by regulating cell wall stiffness in elongating root cortical tissue, counteracting the gravitropic machinery’s known ability to bend the root via its outermost tissues. We conclude that root angle is controlled by EGT1 in cereal crops employing an antigravitropic mechanism.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

A remarkable CHF of 345W/cm 2 is achieved in a wicked-microchannel using HFE-7100

Boiling heat transfer of dielectric fluids is a promising cooling technique for thermal management of microelectronic systems. However, the critical heat flux achievable is generally low, because of the poor thermophysical properties of these fluids. Here, to address this dilemma, we propose a new cooling concept to substantially enhance global liquid supply during phase-change process using enhanced capillary-driven force. Additionally, dedicated vapor pathways are designed among a bank of micro-pillars to facilitate vapor removal. In this work, new wicks comprised of silicon micro-pinfin arrays are explored to significantly enhance the flow boiling heat transfer performance. To examine the functionalities of this wick, experiments on HFE-7100 were carried out with mass velocities varying from 247 to 3,465 kg/m 2 s. To explore the enhancement mechanisms and to analyze the capillary-assisted flow boiling process, visualization studies were conducted. The results indicate that sustainable evaporation induced by wick microstructures and efficient liquid supply are the enhancement mechanisms compared to parallel microchannels with solid walls. It is found that the overall heat transfer coefficient is substantially increased up to 75%. Remarkably, a high critical heat flux (CHF) of approximately 345 W/cm 2 is recorded at G = 3,465 kg/m 2 s at coolant inlet temperature of ~20 °C. Equally importantly, this noticeable enhancement of CHF value is associated with drastically decreased pressure drops compared to microchannels decorated with μ-pinfin fences.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Influence of Surface Treatment on the Interfacial and Mechanical Performance of Metal-Insert Overmolded Composites

Structural composites with metal inserts are gaining increasing interest enabling light weight design for energy efficiency, provide insulation, corrosion protection without compromising mechanical integrity. Such over molded metal-polymer composites show strong potential in many automotive and aerospace component parts, e.g. car bumper, chassis, door, brackets, fasteners, etc. Despite several advantages, metal-polymer dissimilar interface remains a weak spot in structural design, requiring further investigation to improve interfacial interlocking. The current work focuses on enhancing the metal-polymer adhesion between stainless steel inserts and polymer matrices (e.g. acrylonitrile butadiene styrene resin (ABS), and polyamide 66 (PA66) through surface treatment via chemical etching and mechanical roughening. In the chemical etching process, metal substrates were treated with aqua regia solution for different time intervals to evaluate surface roughness measured by water contact angle and morphology analysis. For mechanical roughening approach, metal inserts were subjected to blasting for surface abrasion. Treated samples were also functionalized with aminosilane coupling agent which showed successful grafting on the surface measured by water contact angle. Metal inserts with micro level surface roughness through etching exhibited significant 21% improvement in adhesion strength compared to untreated inserts; however, the effect of silane treatment on the interfacial strength was found to be highly matrix dependent.

Saha, Subhabrata [ORNL] (ORCID:000000033966064X)↗
DOE OSTI2025

Investigating intermolecular interactions among CO 2 , water and PEEK-ionene membrane using cryo ToF-SIMS and isotopic labeling

Cryogenic time-of-flight secondary ion mass spectrometry (cryo ToF-SIMS) has emerged as a powerful tool for investigating molecular interactions, speciation, and dynamics in materials for CO 2 capture. In this study, we apply cryo ToF-SIMS to probe interactions between CO 2 , water, and PEEK-ionene membranes—a promising material for direct CO 2 capture due to its selectivity, durability, and efficiency. Despite this potential, the mechanisms governing CO 2 diffusion and the influence of water vapor on CO 2 behavior remain unclear. To address this, we loaded PEEK-ionene membranes with 13 CO 2 and D 2 O and employed cryo ToF-SIMS to visualize the 3D distribution of CO 2 and water within the membrane. While prior studies suggest that 13 CO 2 is absorbed under ambient conditions, our cryo ToF-SIMS analysis revealed no enhancement of the 13 C/ 12 C ratio, suggesting weak CO 2 -membrane interactions. As a result, CO 2 vaporizes even at low temperatures (−140°C) under vacuum conditions. In contrast, D 2 O displayed a relatively homogeneous distribution in the membrane, suggesting stronger water-membrane interactions via hydrogen bonding (18–20 kJ/mol). Interestingly, CO 2 was not detected in D 2 O-loaded membranes, indicating minimal interference from water vapor on CO 2 diffusion. As a comparison, the cryo ToF-SIMS data show that 13 CO 2 can readily react with a basic Na 2 CO 3 aqueous solution to form NaH 13 CO 3 . These findings demonstrate cryo ToF-SIMS as a critical technique for understanding gas-water-membrane interactions, offering insights for membrane functionalization to improve CO 2 capture efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

High foliar K and P resorption efficiencies in old-growth tropical forests growing on nutrient-poor soils

Resorption is the active withdrawal of nutrients before leaf abscission. This mechanism represents an important strategy to maintain efficient nutrient cycling; however, resorption is poorly characterized in old-growth tropical forests growing in nutrientpoor soils. We investigated nutrient resorption from leaves in 39 tree species in two tropical forests on the Guiana Shield, French Guiana, to investigate whether resorption efficiencies varied with soil nutrient, seasonality, and species traits. The stocks of P in leaves, litter, and soil were low at both sites, indicating potential P limitation of the forests. Accordingly, mean resorption efficiencies were higher for P (35.9%) and potassium (K; 44.6%) than for nitrogen (N; 10.3%). K resorption was higher in the wet (70.2%) than in the dry (41.7%) season. P resorption increased slightly with decreasing total soil P; and N and P resorptions were positively related to their foliar concentrations. We conclude that nutrient resorption is a key plant nutrition strategy in these old-growth tropical forests, that trees with high foliar nutrient concentration reabsorb more nutrient, and that nutrients resorption in leaves, except P, are quite decoupled from nutrients in the soil. Seasonality and biochemical limitation played a role in the resorption of nutrients in leaves, but species-specific requirements obscured general tendencies at stand and ecosystem level.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Microwave-assisted catalytic conversion of waste biomass and plastic feedstocks via thermochemical routes

Microwave-assisted catalytic conversion of waste feedstocks to fuels and value-added chemicals shows incredible promise as an efficient pathway to support the U.S. Department of Energy’s vision toward strengthening the nation’s energy independence. Microwave-heated systems have the potential to outperform conventional technologies through energy-efficient heating and improved product selectivity. This chapter emphasizes microwave-assisted catalytic approaches for waste conversion, allowing maximum energy recovery and extraction of valuable chemicals from waste feedstock such as biomass and plastics while reducing undesired byproducts. A gap remains in understanding how microwaves interact with materials to enable rapid and selective heating, which is crucial for improving catalytic efficiency. This chapter attempts to address this knowledge gap by proposing mechanisms that explain the microwave-catalytic interactions for efficient conversion of biomass-plastic wastes. In addition, comparisons with conventional catalytic technologies as well as the potential for scale ups and future commercialization of microwave-catalytic waste conversion technologies are also discussed.

microwave-assisted catalytic conversion↗
DOE OSTI2022

Significant improvement of conversion efficiency by passivation of low-angle grain boundaries in flexible low-cost single-crystal-like GaAs thin-film solar cells directly deposited on metal tape

We develop an easily implementable yet effective process to achieve high power conversion efficiency in newly-developed flexible single-crystal-like GaAs thin-film photovoltaic solar cells on cheap metal tape. We study various techniques on the fabricated devices to passivate the defect states associated with dangling bonds at low-angle grain boundaries (LA-GBs) existing in the single-crystal-like GaAs material. We report that sulfur by trioctylphosphine sulfide (TOP:S) solution treatment can partially but effectively passivate the defect states at the LA-GBs to increase all the solar cell performance parameters of open-circuit voltage VOC (33.2%), short-circuit current JSC (19.5%), and fill factor FF (25.8%), resulting in the improvement of the power conversion efficiency more than double. The material and device characterizations and numerical modeling are performed to propose a mechanism, also suggesting that the power conversion efficiency higher than 20%, which is an important target milestone in emerging solar cell technologies, can be achieved. This work presents the first effective passivation of the bulk defects in GaAs at the device level and can also offer a solution for other photonic and electronic devices using non-single-crystalline GaAs films for flexible electronics.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Review of Wave Energy Converter Power Take-Off Systems, Testing Practices, and Evaluation Metrics: Preprint

While the field of wave energy has been the subject of numerical simulation, scale model testing, and precommercial project testing for decades, wave energy technologies remain in the early stages of development and must continuing proving themselves as a promising modern renewable energy field. One of the difficulties that wave energy systems have been struggling to overcome is the design of highly efficient energy conversion systems that can convert the mechanical power, derived from the oscillation of wave activated bodies, into another useful product. Often the power take-off (PTO) is defined as the single unit responsible for converting mechanical power into another usable form such as electricity, pressurized fluid, compressed air, and others. The PTO, and the entire power conversion chain (PCC), is of great importance as it affects not only how efficient wave power is converted into electricity, but also contributes to the mass, size, structural dynamics, and levelized cost of energy (LCOE) of the wave energy converter (WEC). Unlike wind and solar, there is no industrial standard device, or devices, for wave energy conversion and this diversity is transferred to the PTO system. The majority of current WEC PTO systems incorporate a mechanical or hydraulic drive train, power generator, and an electrical control system. The challenge of WEC PTO designs is designing a mechanical-to-electrical component that can efficiently convert irregular, bi-directional, low frequency and low alternating velocity wave motions. While gross average power levels can be predicted in advance, the variable wave elevation input has to be converted into smooth electrical output and hence usually necessitates some type of energy storage system, such as battery storage, accumulator super capacitors, etc., or other means of compensation such as an array of devices. One of the primary challenges for wave energy converter systems is the fluctuating nature of wave resources, which require WEC components to be designed to handle loads (i.e. torques, forces, and powers) that are many times greater than the average load. This approach requires a much greater PTO capacity than the average power output and indicates a higher cost. In addition, supporting mechanical coupling and or gearing can be added to the PCC to help alleviate the difficulties with transmission and control of fluctuating large loads with low frequencies (indicative of wave forcing) into smaller loads at higher frequencies (optimum for conventional electrical machine design) can quickly increase the complexity of the PCC which could result in a greater number of failure modes and increased maintenance costs. All of the previous points demonstrate how the PTO influences WEC dynamics, reliability, performance and cost which are critical design factors. This paper further explores these topics by providing a review of the state-of-the-art PTO systems currently under development, how these novel PTO systems are tested and derisked prior to precommercial deployment, and the evaluation metrics historically used to differentiate between PTO designs and how they can be improved to support control co-design focused development of wave energy systems.

laboratory testing↗
DOE OSTI2025

Impact Testing Theories and Techniques Employed at the TA-III Mechanical Shock Complex

We present theories and techniques to support safe, predictable, and efficient impact testing at the Sandia National Laboratories TA-III Mechanical Shock Complex (MSC), located in Building 6570. The two testing instruments used at the MSC are the 20-inch actuator, which is a launcher that propels sleds down an indoor track, and an indoor 6-in bore compressed-gas powered cannon. The theories and techniques presented derive from basic mechanical engineering principles but are significantly informed and validated by testing experience at the MSC.

42 ENGINEERING↗
DOE OSTI2022

The Molecular Ordering and Double-Channel Carrier Generation of Nonfullerene Photovoltaics within Multi-Length-Scale Morphology

The success of nonfullerene acceptor (NFA) solar cells lies in their unique physical properties beyond the extended absorption and suitable energy levels. The current study investigates the morphology and photophysical behavior of PBDB-T donor blending with ITIC, 4TIC, and 6TIC acceptors. Single-crystal study shows that the π–π stacking and side-chain interaction dictate molecular assembly, which can be carried to blended films, forming a multi-length-scale morphology. Spontaneous carrier generation is seen in ITIC, 4TIC, and 6TIC neat films and their blended thin films using the PBDB-T donor, providing a new avenue of zero-energy-loss carrier formation. The molecular packing associated with specific contacts and geometry is key in influencing the photophysics, as demonstrated by the charge transfer and carrier lifetime results. The 2D layer of 6TIC facilitates the exciton-to-polaron conversion, and the largest photogenerated polaron yield is obtained. Finally, the new mechanism, together with the highly efficient blending region carrier generation, has the prospect of the fundamental advantage for NFA solar cells, from molecular assembly to thin-film morphology.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Charge Concentration Limits the Hydrogen Evolution Rate in Organic Nanoparticle Photocatalysts

Colloidal organic nanoparticles have proven to be a promising class of photocatalyst for performing the Hydrogen Evolution Reaction (HER) due to their dispersibility in aqueous environments, their strong absorption within the visible region, and the tunabilty of their component materials' redox potentials. Currently, there is little understanding of how charge generation and accumulation in organic semiconductors change when these materials are formed into nanoparticles that share a high interfacial area with water, nor is it known what mechanism limits the hydrogen evolution efficiency in recent reports on organic nanoparticle photocatalysts. Herein, we use Time-Resolved Microwave Conductivity to study aqueous-soluble organic nanoparticles and bulk thin films composed of various blend ratios of the non-fullerene acceptor EH-IDTBR and conjugated polymer PTB7-Th and examine the relationship between composition, interfacial surface area, charge carrier dynamics, and photocatalytic activity. We quantitatively measure the rate of Hydrogen Evolution Reaction by nanoparticles composed of various donor:acceptor blend ratio compositions and find that the most active blend ratio displays a Hydrogen Quantum Yield of 0.83% per photon. Moreover, we find that nanoparticle photocatalytic activity corresponds directly to charge generation, and that nanoparticles have 3x more long-lived accumulated charges relative to bulk samples of the same material composition. Here these results suggest that, under our current reaction conditions, with approximately 3x solar flux, catalytic activity by these nanoparticles is limited by the concentration of electrons and holes in operando and not a finite number of active surface cites or the catalytic rate at the interface. This provides a clear design goal for the next generation of efficient photocatalytic nanoparticles.

08 HYDROGEN↗
DOE OSTI2025

Reversible Ferroelectric Polarization Modulation of Chiral Molecular Ferroelectrics by Circularly Polarized Light

Abstract The optical modulation of ferroelectric polarization constitutes a transformative, non‐contact strategy for the precise manipulation of ferroelectric properties, heralding advancements in optically stimulated ferroelectric devices. Despite its potential, progress in this domain is constrained by material limitations and the intricate nature of the underlying mechanisms. Recent studies have achieved efficient regulation of ferroelectric polarization and thermal conductivity in chiral ferroelectric thin films through the application of left‐ and right‐handed circularly polarized light (LCP and RCP). Differential absorption of circularly polarized light (CPL) induces nonequilibrium carrier dynamics, generating distinctive interfacial electrostatic fields that enable precise control of ultrathin ferroelectric films. For (R)‐BINOL−DIPASi and (S)‐BINOL−DIPASi (C 26 H 26 O 2 Si), polarization changes surpass 23%, exhibiting opposite response under LCP and RCP excitation. In R chiral films, remnant polarization decreases from 1.05 µC cm − 2 under LCP to 0.85 µC cm − 2 under RCP, whereas in S chiral films, polarization increases from 0.85 µC cm − 2 under LCP to 0.98 µC cm − 2 under RCP. This reversible modulation facilitates reliable switching between ON and OFF states, presenting the potential of chiral ferroelectric materials for flexible, high‐speed integrated photonic sensor technologies.

Chemistry↗