Search NASA⌕ Search

SEARCH · Search NASA

Results for “Consequence Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Combined, nonlinear aerodynamic and structural method for the aeroelastic design of a three-dimensional wing in supersonic flow

An iterative procedure for the static aeroelastic design of a flexible wing at supersonic speeds has been developed. The procedure combines a nonlinear, full-potential solver (NCOREL) with an equivalent plate structural analysis method. The NCOREL method yields significantly improved aerodynamic estimates compared to linear theory. The equivalent plate structural analysis method demonstrates an order of magnitude reduction in computer memory and execution time compared to finite-element methods. A highly swept wing is analyzed at high lift using this aeroelastic procedure. The results indicate that the wing deforms favorably due to aerodynamic loading and, consequently, that the inviscid drag levels do not vary at the required lift coefficient although the angle of attack varies significantly. A sensitivity analysis of the type required for optimization studies was also performed with the aeroelastic design procedure.

Pittman, J. L.↗
DOE OSTI2025

Improving Dose Modeling With Dynamic Modeling Tools [Slides]

Utilities aiming for higher fuel enrichment for power uprates or extended operation times before refueling must conduct a new dose analysis. Current conservative dose estimation standards may cause utilities to exceed regulatory limits for proposed increased fuel enrichment. A more accurate modeling of doses from reactor accidents can lower these conservative assumptions. Prescott et al. (2022) demonstrated that the Event Modeling Risk Assessment using Linked Diagrams (EMRALD) software tool, developed at Idaho National Laboratory (INL), can be coupled with the Modular Accident Analysis Program (MAAP5) for dynamic accident analysis in reactor plants. EMRALD forms models of potential accident scenarios, while MAAP5 simulates the accident progression and dose consequences. By integrating these software tools with utility-specific data, a more precise estimation of dose consequences from plant accidents can be achieved. Preliminary findings indicate that EMRALD provides accurate mean core damage frequencies for generalized accident scenarios. Future work includes expanding the model to account for plant-specific data and mitigation factors.

97 - MATHEMATICS AND COMPUTING↗
NASA NTRS1981

Analytical verification of undesirable properties of direct model reference adaptive control algorithms

The present investigation is concerned with a new method, called 'final approach analysis', which has been developed to analyze the dynamic properties of a class of direct adaptive control algorithms. Particular attention is given to the robustness of these algorithms to a number of aspects. These aspects are related to the generation of high frequencies in the plant control signal, to excessive bandwidth of the adaptive control loop resulting in excitation of unmodeled dynamics, and, consequently, leading to dynamic instability of the closed-loop adaptive system, and, thirdly, to noise corrupted measurements. The final approach analysis is useful because it can be used in a constructive way to adjust the adaptive gains so as to limit the closed-loop system bandwidth and to ameliorate some of the undesirable characteristics of existing adaptive algorithms.

Rohrs, C. E.↗
NASA NTRS1983

NASTRAN forced vibration analysis of rotating cyclic structures

Theoretical aspects of a new capability developed and implemented in NASTRAN level 17.7 to analyze forced vibration of a cyclic structure rotating about its axis of symmetry are presented. Fans, propellers, and bladed shrouded discs of turbomachines are some examples of such structures. The capability includes the effects of Coriolis and centripetal accelerations on the rotating structure which can be loaded with: (1) directly applied loads moving with the structure and (2) inertial loas due to the translational acceleration of the axis of rotation (''base' acceleration). Steady-state sinusoidal or general periodic loads are specified to represent: (1) the physical loads on various segments of the complete structure, or (2) the circumferential harmonic components of the loads in (1). The cyclic symmetry feature of the rotating structure is used in deriving and solving the equations of forced motion. Consequently, only one of the cyclic sectors is modelled and analyzed using finite elements, yielding substantial savings in the analysis cost. Results, however, are obtained for the entire structure. A tuned twelve bladed disc example is used to demonstrate the various features of the capability.

Elchuri, V.↗
NASA NTRSDate not supplied

Long-Term Health Metric Development Effort

INTRODUCTION Probabilistic Risk Assessment (PRA) is a methodology applied when high-stakes decisions need to be made about complex systems. PRA often uses risk minimization to aid decision making, such as when establishing vehicle requirements or resource allocations. The NASA Human System Risk Board (HSRB) maintains the human spaceflight risk postures, many of which have in-mission medical outcomes, but the full risk set also includes performance and Long-Term Health (LTH) outcomes. An effort is underway to determine the dependencies between LTH risk outcomes and mission characteristics and to identify metrics for quantifying LTH outcomes. The LTH metrics will be incorporated into future PRA tools currently under development to support crew health and performance decision making. LONG-TERM HEALTH (LTH) RISK LTH risk encompasses the timeframe from immediately post-flight, through the rest of an astronaut’s career, through retirement, and until death. LTH outcomes include the time and interventions needed for the astronaut to return to preflight physiological states after experiencing spaceflight hazards and recovery from any in-mission medical events that persist into the post-flight timeframe. It includes chronic complications that may arise due to experiencing in-flight medical conditions or injuries and medical conditions that occur later in life with a higher probability of occurrence or with more severity because of their spaceflight exposure. Finally, LTH outcomes can also include a reduction in life expectancy due to spaceflight exposures. Eighteen of the HSRB risks contain an LTH component, each with a unique incidence rate and consequence severity. ON-GOING LTH METRIC DEVELOPMENT EFFORTS Based on guidance from a stakeholder workshop held on June 1, 2023, only LTH outcomes with causes tied to spaceflight experience that are significantly different from normal healthy aging and which can be affected by changes in in-mission resources are targeted for inclusion within the PRA modeling efforts. Current on-going efforts include a sensitivity analysis of potential in-flight medical conditions to determine which conditions may persist into post-flight and how the consequences may be affected by in-mission medical resources. Also underway is determination of differences in the time for a return to preflight physiological baselines when in-flight countermeasures are available versus when they are not. Analyses performed with publicly available astronaut data and collaborations with the Lifetime Surveillance of Astronaut Health team are being designed to understand which LTH outcomes differ significantly from natural healthy aging. Information exchanges are also occurring with LTH risk custodians to understand how they quantify outcomes. FUTURE PLANS Risk characteristics will be determined for each LTH risk that meets our inclusion criteria and the dependencies of their outcomes to in-mission resources and mission characteristics will be established. The individual risks will be integrated together into one or more high level LTH metrics for inclusion in the PRA tool, so that LTH risks can be considered along with in-mission risks during crew health and performance system decision support trade studies.

B. E. Lewandowski↗
DOE OSTI2025

Modeling phase transformations in Mn-rich disordered rocksalt cathodes with machine-learning interatomic potentials

Mn-rich disordered rocksalt (DRX) cathode materials exhibit a phase transformation from a disordered to a partially disordered spinel-like structure (δ-phase) during electrochemical cycling. Here, in this computational study, we use charge-informed molecular dynamics with a fine-tuned CHGNet foundation potential to investigate the phase transformation in LixMn 0.8 Ti 0.1 O 1.9 F 0.1 . Our results indicate that transition metal migration occurs and reorders to form the spinel-like ordering in an FCC anion framework. The transformed structure contains a higher concentration of nontransition metal (0-TM) face-sharing channels, which are known to improve Li transport kinetics. Analysis of the Mn valence distribution suggests that the appearance of tetrahedral Mn 2+ is a consequence of spinel-like ordering, rather than the trigger for cation migration as previously suggested. Calculated equilibrium intercalation voltage profiles demonstrate that the δ-phase, unlike the ordered spinel, exhibits solid-solution signatures at low voltage. A higher Li capacity is obtained than in the DRX phase. This study provides atomic insights into solid-state phase transformation and its relation to experimental electrochemistry, highlighting the potential of machine-learning interatomic potentials for understanding complex oxide materials.

Zhong, Peichen [University of California, Berkeley↗
DOE OSTI2025

Distinguishing Orbiting and Infalling Dark Matter Particles with Machine Learning

Dark matter halos are typically defined as spheres that enclose some overdensity, but these sharp, somewhat arbitrary boundaries introduce nonphysical artifacts such as backsplash halos, pseudo-volution, and an incomplete accounting of halo mass. A more physically motivated alternative is to define halos as the collection of particles that are physically orbiting within their potential well. However, existing methods to classify particles as orbiting or infalling suffer from trade-offs between accuracy, computational cost, and generalizability across cosmologies. We present an efficient, yet accurate, supervised machine learning approach using decision trees. The classification is based on only the particle radii and velocities at two epochs. Compared to detailed analysis of particle trajectories, we find that our model matches the classification of 97% of particles. Consequently, we are able to quickly and accurately reproduce the density profiles of the orbiting and infalling components out to many virial radii. We demonstrate that our model generalizes to a significantly different cosmology that lies outside the training data set. We make publicly available both our final model and the code to train similar models.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1984

Guidelines for submitting data to the National Space Science Data Center

The mission of the National Space Science Data Center (NSSDC) is to disseminate space science data for further analysis beyond that provided by the principal investigators (PIs) or team leaders (TLs) and their coworkers. Consequently, the NSSDC is responsible for the acquisition, organization, storage, retrieval, announcement, and distribution of scientific data obtained mainly from satellites and spacecraft. Any scientist may acquired data from the NSSDC and use them in further studies, either alone or in conjunction with data from ground-based or spacecraft experiments. With the responsibility for archiving data is the concomitant responsibility for distributing the documentation necessary to make those data usable. Since the group most knowledgeable about a particular experiment and its data is the PI or TL and his coworkers, and since the NSSDC cannot possibly supply the qualified personnel needed to write this documentation comprehensively, it is the responsibility of the PI or TL to provide the essential documentation. The NSSDC will support this effort by defining what is needed, by reviewing what is provided, and by reproducing and distributing the resulting documentation with the data. For a high-use data set, the NSSDC may publish the documentation as a Data Users Note; for a low-use data set, the NSSDC may distribute a Xerox, microfilm, or microfiche copy of the documentation.

Source record↗
NASA NTRS1990

Attitude sensor alignment calibration for the solar maximum mission

An earlier heuristic study of the fine attitude sensors for the Solar Maximum Mission (SMM) revealed a temperature dependence of the alignment about the yaw axis of the pair of fixed-head star trackers relative to the fine pointing Sun sensor. Here, new sensor alignment algorithms which better quantify the dependence of the alignments on the temperature are developed and applied to the SMM data. Comparison with the results from the previous study reveals the limitations of the heuristic approach. In addition, some of the basic assumptions made in the prelaunch analysis of the alignments of the SMM are examined. The results of this work have important consequences for future missions with stringent attitude requirements and where misalignment variations due to variations in the temperature will be significant.

Pitone, Daniel S.↗
NASA NTRS1990

The coherent Cerenkov radiated power from a group of field-aligned test particles in a magnetoplasma

An expression is derived that describes the coherent Cerenkov radiated power from a group of test particles in a plasma medium moving parallel to a magnetic field. In this analysis, each particle has an arbitrary position and velocity along a field line and, as a consequence, both the spatial and temporal coherence of the radiation are considered. As an example, it is demonstrated that a monoenergetic electron beam consisting of small pulses can generate wave powers well above incoherent levels if the pulse spacing is comparable to an integer number of emission wavelengths. It is also shown that, if the beam particles have a velocity spread, Delta-V, the wave powers will decrease in time due to the reduced temporal coherence of the particle radiators, where this coherence scales as 1/Delta-V. This latter effect applies to any charged particle beam propagating in a magnetoplasma, because even an initially monoenergetic beam becomes thermalized by electrostatic wave-particle interactions reducing the radiated power.

Farrell, W. M.↗
NASA NTRS1961

Direct Measurements of Interplanetary Dust Particles in the Vicinity of Earth

The direct measurements made by the Explorer VIII satellite provide the first sound basis for analyzing all available direct measurements of the distribution of interplanetary dust particles. The model average distribution curve established by such an analysis departs significantly from that predicted by the (uncertain) extrapolation of results from meteor observations. A consequence of this difference is that the daily accretion of interplanetary particulate matter by the earth is now considered to be mainly dust particles of the direct measurements range of particle size. Almost all the available direct measurements obtained with microphone systems on rockets, satellites, and spacecraft fit directly on the distribution curve defined by Explorer VIII data. The lack of reliable datum points departing significantly from the model average distribution curve means that available direct measurements show no discernible evidence of an appreciable geocentric concentration of interplanetary dust particles.

McCracken, C. W.↗
NASA NTRS2004

Atmospheric Entry Studies and the Smallest Impact Craters on Mars

High-resolution images from the Mars Orbiter Camera reveal impact craters as small as 10 m [1], and still smaller craters (< 0.5 m) have been inferred from surface boulders at the Pathfinder landing site [2]. Any small-scale impact environment at scales of meters or smaller would obviously be a potent contributor to erosive processes on Mars, to the small-scale evolution of its surface, and to mineralogic/ compositional alterations of its surface materials. It is not very clear from the analysis of Viking and Pathfinder images, however, what the smallest craters are on Mars. As a consequence, it might be informative to consult atmospheric-entry calculations that specify the smallest meteoroid able to survive passage through the present martian atmosphere. We conducted such calculations and perceive them as providing useful constraints for understanding small-scale surface processes on Mars and as possible guides for the interpretation of surface images from past and future lander missions.

Hoerz, F.↗
NASA NTRS2014

An Integrated Reliability and Physics-Based Risk Modeling Approach for Assessing Human Spaceflight Systems

This paper presents an integrated reliability and physics-based risk modeling approach for assessing human spaceflight systems. The approach is demonstrated using an example, end-to-end risk assessment of a generic-crewed space transportation system during a reference mission to the International Space Station. The behavior of the system is modeled using analysis techniques from multiple disciplines in order to properly capture the dynamic time- and state- dependent consequences of failures encountered in different mission phases. We discuss how to combine traditional reliability analyses with Monte Carlo simulation methods and physics-based engineering models to produce loss-of- mission and loss-of-crew risk estimates supporting risk-based decision-making and requirement verification. This approach facilitates risk-informed design by providing more realistic representation of system failures and interactions; identifying key risk-driving sensitivities, dependencies, and assumptions; and tracking multiple figures of merit within a single, responsive assessment framework that can readily incorporate evolving design information throughout system development.

Risk assessment↗
NASA NTRSDate not supplied

NASA CARA Tools

The NASA Conjunction Assessment Risk Analysis (CARA) team has created and posted to GitHub a set of MATLAB software tools for collision assessment (CA) analysis. The software is provided to the public under a NASA Open-Source Software Agreement and is maintained/updated by the CARA Analysis team. Capabilities provided within the toolset include algorithms in assessing probability of collision (Pc), collision consequence, covariance realism, Orbit Determination (OD) quality assessment, and single covariance max Pc. Additionally, a set of utilities are provided for astrodynamics topics closely related to CA, such as: Conjunction Data Message (CDM) parsing, covariance transformations, coordinate system transformations, etc. The repository is regularly updated on a monthly basis and new functionality will be added as algorithms are approved for public release. This presentation will provide a brief introduction to the toolset, highlight some of the key components which can be used in operations, and will present information on algorithms that are in the release pipeline and can be expected soon. This software will enable operators to independently perform CA calculations using the same core algorithms that CARA uses in operations.

L. Baars↗
NASA NTRSDate not supplied

NASA CARA Tools

The NASA Conjunction Assessment Risk Analysis (CARA) team has created and posted to GitHub a set of MATLAB software tools for collision assessment (CA) analysis. The software is provided to the public under a NASA Open-Source Software Agreement and is maintained/updated by the CARA Analysis team. Capabilities provided within the toolset include algorithms in assessing probability of collision (Pc), collision consequence, covariance realism, Orbit Determination (OD) quality assessment, and single covariance max Pc. Additionally, a set of utilities are provided for astrodynamics topics closely related to CA, such as: Conjunction Data Message (CDM) parsing, covariance transformations, coordinate system transformations, etc. The repository is regularly updated on a monthly basis and new functionality will be added as algorithms are approved for public release. This presentation will provide a brief introduction to the toolset, highlight some of the key components which can be used in operations, and will present information on algorithms that are in the release pipeline and can be expected soon. This software will enable operators to independently perform CA calculations using the same core algorithms that CARA uses in operations.

Luis Baars↗
NASA NTRS2015

The Human Factors of an Early Space Accident: Flight 3-65 of the X-15

The X-15 was a critical research vehicle in the early days of space flight. On November 15, 1967, the X-15-3 suffered an in-flight breakup. This 191st flight of the X-15 and the 65th flight of this third configuration was the only fatal accident of the X-15 program. This paper presents an analysis, from a human factors perspective, of the events that led up to the accident. The analysis is based on the information contained in the report of the Air Force-NASA Accident Investigation Board (AIB) dated January, 1968. The AIBs analysis addressed, primarily, the events that occurred subsequent to the pilots taking direct control of the reaction control system. The analysis described here suggests that all of the events that caused the accident occurred well before the moment when the pilot switched to direct control. Consequently, the analyses and conclusions regarding the causal factors of, and the contributing factors to, the loss of Flight 3-65 presented here differ from those of the AIB based on the same evidence. Although the accident occurred in 1967, the results of the presented analysis are still relevant today. We present our analysis and discuss its implications for the safety of space operations.

accident investigation↗
NASA NTRS2017

Non-Linear Analysis of the NASA Super Pressure Balloons: Whole Flight Simulations

Tensys have a long-established background in the shape generation and load analysis of architectural stressed membrane structures. Founded upon their inTENS finite element analysis suite, these activities have broadened to encompass 'lighter than air' structures such as aerostats, airships, hybrid air vehicles and stratospheric balloons. Tensys have acted as consultants to the NASA Super Pressure Balloon (SPB) Program since 2004. Previous papers have focussed upon the application of inTENS to the overall structural and stability analysis of pumpkin type balloons as used in the SPB Program. Particular emphasis has been placed upon the ability to study both stress and stability at all stages of a flight. As the program has developed, increasing modelling fidelity has been introduced as design refinement has moved emphasis from the overall shape to the performance of individual details. Examples include the introduction of a contact capability into inTENS to better represent the separate cap layer of film. Localised investigations have considered the consequence of local geometric anomalies introduced during fabrication and the effects of debonding of the PBO tendon within its sleeve. Analysis to date has used a material model for the polyethylene shell film developed by Dr Rand of Winzen Engineering, supported by a program of fine resolution material tests at the Balloon Research and Development Laboratory (BRDL) at the GSFC Wallops Island Facility. Based upon work first reported by Schapery, this model has been incorporated into so-called 'snapshot' analyses within inTENS. For a given elapsed time point and temperature distribution, non-linear material properties are iteratively updated for the current stress state in each individual element until changes in those material properties are insignificant. This process has to be iterative as the film stresses and material properties are interdependent. Attempts to derive a time-stepping incremental viscoelastic capability using the Schapery Rand model encountered problems when dealing with the varying temperatures associated with balloon deployment, pressurisation and diurnal behaviour. An alternative approach has been developed by Pellegrino et al at Caltech, again with support from the NASA Balloon Program Office. This is a large strain non-linear viscoelastic model that includes film out-of-plane mechanical and thermal effects. Working from a unified base, this model can be utilised for time-stepping analyses in both a modulus or compliance mode, or a combination of both. This new capability is intended to enhance the current NASA balloon design process. This paper presents the implementation of the Caltech model into a specialist finite element suite, inTENS and its application to whole flight simulations.

Wakefield, David↗