Search NASA⌕ Search

SEARCH · Search NASA

Results for “DATA COMPRESSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Cosmology with second- and third-order shear statistics for the Dark Energy Survey: Methods and simulated analysis

We present a new pipeline designed for the robust inference of cosmological parameters using both second- and third-order shear statistics. We build a theoretical model for rapid evaluation of three-point correlations using our fastnc code and integrate it into the cosmosis framework. We measure the two-point functions 𝜉 ± and the full configuration-dependent three-point shear correlation functions across all auto- and cross-redshift bins. We compress the three-point functions into the mass aperture statistic ⟨ℳ$^{3}_{ap}$⟩ for a set of 796 simulated shear maps designed to model the Dark Energy Survey Year 3 data. We estimate from it the full covariance matrix and model the effects of intrinsic alignments, shear calibration biases and photometric redshift uncertainties. We apply scale cuts to minimize the contamination from the baryonic signal as modeled through hydrodynamical simulations. We find a significant improvement of 83% on the figure of merit in the Ω m − 𝑆 8 plane when we add the ⟨ℳ$^{3}_{ap}$⟩ data to 𝜉 ± . Here, we present our findings for all relevant cosmological and systematic uncertainty parameters and discuss the complementarity of third-order and second-order statistics.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Chemical decomposition in shock-compressed 1,1-diamino-2,2-dinitroethene (FOX-7) single crystals: Time-resolved Raman spectroscopy

Understanding the evolution of chemical decomposition—at the molecular level—in shock-compressed insensitive high explosive (IHE) single crystals is an important need. Toward this goal, time-resolved Raman spectra were measured in 1,1-diamino-2,2-dinitroethene (FOX-7) single crystals shock compressed to stresses above 20 GPa. At 22 GPa and higher stresses, the Raman peak intensities were significantly reduced, showing the onset and extent of chemical changes. At 33 GPa, no Raman peaks were observed, suggesting complete decomposition of FOX-7. The 22 GPa onset from Raman data is in marked contrast to the much higher (32 GPa) onset determined previously from wave profile measurements—showing the significantly greater sensitivity of Raman measurements for gaining insight into shock-induced molecular-level changes in IHE single crystals. The close match between the complete loss of Raman peaks at 33 GPa and the 32 GPa reaction threshold determined from continuum data makes a good case that the two results are related and they reflect significant energy release due to decomposition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

On the accuracy of compressibility transformations

This study highlights the importance of satisfying the eddy viscosity equivalence below the logarithmic layer, to deriving accurate compressibility transformations. First, we analyze the ability of known transformations to satisfy the eddy viscosity equivalence and show that the accuracy of these transformations is strongly dependent on this ability. Second, in a step-by-step manner, we devise new transformations that satisfy this hypothesis. An approach based on curve fitting of the incompressible Direct Numerical Simulation data for eddy viscosity profiles below the logarithmic layer provides an extremely accurate transformation, which motivates self-contained methods, making use of mixing length formulas in the inner region. It is shown that the accuracy of existing transformations can be significantly improved by applying these ideas, below the logarithmic layer. Motivated by the effectiveness of the formulations derived from eddy viscosity equivalence, we introduce a new integral transformation based on Reynolds number equivalence between compressible and incompressible flows. This approach is based on defining a new compressible velocity scale, which affects the accuracy of transformations. Several choices for the velocity scale are tested, and in each attempt, it is shown that the eddy viscosity equivalence plays a very important role for the accuracy of compressibility transformations.

42 ENGINEERING↗
DOE OSTI2026

Scaling kinetic Monte-Carlo simulations of grain growth with combined convolutional and graph neural networks

Graph neural networks (GNN) have emerged as a promising machine learning method for microstructure simulations such as grain growth. However, accurate modeling of realistic grain boundary networks requires large simulation cells, which GNN has difficulty scaling up to. To alleviate the computational costs and memory footprint of GNN, we suggest a hybrid architecture combining a convolutional neural network (CNN) based bijective autoencoder to compress the spatial dimensions, and a GNN that evolves the microstructure in the latent space of reduced spatial sizes. Our results demonstrate that the new design significantly reduces computational costs with using fewer message passing layer (from 12 down to 3) compared with GNN alone. The reduction in computational cost becomes more pronounced as the spatial size increases, indicating strong computational scalability. For the largest mesh evaluated (160 3 ), our method reduces memory usage and runtime in inference by 117× and 115×, respectively, compared with GNN-only baseline. More importantly, it shows higher accuracy and stronger spatiotemporal capability than the GNN-only baseline, especially in long-term testing. Such combination of scalability and accuracy is essential for simulating realistic material microstructures over extended time scales. The improvements can be attributed to the bijective autoencoder’s ability to compress information losslessly from spatial domain into a high dimensional feature space, thereby producing more expressive latent features for the GNN to learn from, while also contributing its own spatiotemporal modeling capability. Training data are generated from stochastic grain growth simulations, providing realistic variability for learning robust microstructure evolution. Comprehensive system validation confirms that the model is accurate, robust, and scalable.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Nuclear quantum effects in molecular liquids across chemical space

Abstract Nuclear quantum effects (NQEs) influence many physical and chemical phenomena, particularly those involving light atoms or occurring at low temperatures. However, their impact has been carefully quantified in few systems-like water-and is rarely considered more broadly. Here we use path-integral molecular dynamics to systematically investigate NQEs on thermophysical properties of 92 organic liquids at ambient conditions. Depending on chemical constitution, we find substantial impact across thermal expansivity, compressibility, dielectric constant, enthalpy of vaporization, and notably molar volume, which shows consistent, positive quantum-classical differences up to 5%; similar, less pronounced trends manifest as isotope effects from deuteration. Using data-driven analysis, we identify three features-molar mass, classical hydrogen density, and classical thermal expansivity-that accurately predict NQEs and facilitate understanding of how characteristics like branching and heteroatom content influence behavior. This work highlights the broad relevance of NQEs in molecular liquids, while also providing a conceptual and practical framework to anticipate their impact.

Science & Technology - Other Topics↗
DOE OSTI2024

Quantifying motion blur by imaging shock front propagation with broadband and narrowband X-ray sources

Time-integrated radiography using MeV Bremsstrahlung X-ray sources is the norm for imaging during system-level testing of components and structures under dynamic condition. One source of error in the analysis of the time-integrated radiography data sets stems from motion blur which smears out sharp interfaces to a greater degree with longer exposure times, which become necessary to provide sufficient signal-to-noise with low X-ray penetration of objects of interest. To quantify motion blur, a 1D shock wave through PMMA was investigated experimentally at The Dynamic Compression Sector at The Advanced Photon Source (DCS@APS) with tapered broadband and 25.46 ± 1.06 keV narrowband X-rays. Four cameras with different exposure times were used for each experiment to compare the effect that exposure time has on motion blur. In addition, our methodology to accurately simulate motion blur in terms of transmission and shape is presented and compared to our experimental results and quantified. There is a high level of agreement between the experimental and simulation results across the range of data sets investigated in this study with a percent difference range of 0.29–1.31% for the four shots. The methodology of this work serves as a steppingstone towards a physically validated model that could be used in conjunction with experimental results to deconvolve physical parameters, densities, and interfaces of interest in a way that would not be possible with experimental results alone.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Framework for custom event sample augmentations for ATLAS analysis data

For HEP event processing, data is typically stored in column-wise synchronized containers, such as most prominently ROOT’s TTree, which have been used for several decades to store by now over 1 exabyte. These containers can combine row-wise association capabilities needed by most HEP event processing frameworks (e.g. Athena for ATLAS) with column-wise storage, which typically results in better compression and more efficient support for many analysis use-cases. One disadvantage is that these containers, TTree in the HEP use-case, require to contain the same attributes for each entry/row (representing events), which can make extending the list of attributes very costly in storage, even if those are only required for a small subsample of events. Since the initial design, the ATLAS software framework features powerful navigational infrastructure to allow storing custom data extensions for subsamples of events in separate, but synchronized containers. This allows adding event augmentations to ATLAS standard data products (such as DAOD-PHYS or PHYSLITE) avoiding duplication of those core data products, while limiting their size increase. For this functionality, the framework does not rely on any associations made by the I/O technology (i.e. ROOT), however it supports TTree friends and builds the associated index to allow for analysis outside of the ATLAS framework. A prototype based on the Long-Lived Particle search is implemented and preliminary results with this prototype will be presented. At this point, augmented data are stored within the same file as the core data. Storing them in separate files will be investigated in future, as this could provide more flexibility, e.g. certain sites may only want a subset of several augmentations or augmentations can be archived to tape once their analysis is complete.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

High-pressure phase transition of olivine-type Mg 2 GeO 4 to a metastable forsterite-III type structure and their equations of state

Germanates are often used as structural analogs of planetary silicates. We have explored the high-pressure phase relations in Mg 2 GeO 4 using diamond-anvil cell experiments combined with synchrotron X-ray diffraction and computations based on density functional theory. Upon room temperature compression, forsterite-type Mg 2 GeO 4 remains stable up to 30 GPa. At higher pressures, a phase transition to a forsterite-III type (Cmc2 1 ) structure was observed, which remained stable to the peak pressure of 105 GPa. Using a third-order Birch Murnaghan fit to the experimental data, we obtained V 0 = 305.1(3) Å3, K 0 = 124.6(14) GPa, and $K'_0$ = 3.86 (fixed) for forsterite-type Mg 2 GeO 4 and V 0 = 263.5(15) Å 3 , K 0 = 175(7) GPa, and $K'_0$ = 4.2 (fixed) for the forsterite-III type phase. The forsterite-III type structure was found to be metastable when compared to the stable assemblage of perovskite/post-perovskite + MgO, as observed during laser-heating experiments. Understanding the phase relations and physical properties of metastable phases is crucial for studying the mineralogy of impact sites, understanding metastable wedges in subducting slabs, and interpreting the results of shock compression experiments.

58 GEOSCIENCES↗
DOE OSTI2025

Supporting Special Values in ZFP

This white paper outlines potential approaches to supporting special values in the ZFP numerical compressor without breaking backwards compatibility. Other than infinities and NaNs, special values are often used to indicate the absence of data, where no value is defined, for example by designating finite but extreme “fill values” as special. Such fill values are commonly used in earth system science, among other applications, but if left as is during compression lead to artifacts and loss of precision in nearby true values. Multiple candidate solutions that would allow ZFP to recognize special values are here proposed. Until such support is available, we also sketch available workarounds.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Unsupervised learning-enabled pulsed infrared thermographic microscopy of subsurface defects in stainless steel

Metallic structures produced with laser powder bed fusion (LPBF) additive manufacturing method (AM) frequently contain microscopic porosity defects, with typical approximate size distribution from one to 100 microns. Presence of such defects could lead to premature failure of the structure. In principle, structural integrity assessment of LPBF metals can be accomplished with nondestructive evaluation (NDE). Pulsed infrared thermography (PIT) is a non-contact, one-sided NDE method that allows for imaging of internal defects in arbitrary size and shape metallic structures using heat transfer. PIT imaging is performed using compact instrumentation consisting of a flash lamp for deposition of a heat pulse, and a fast frame infrared (IR) camera for measuring surface temperature transients. However, limitations of imaging resolution with PIT include blurring due to heat diffusion, sensitivity limit of the IR camera. We demonstrate enhancement of PIT imaging capability with unsupervised learning (UL), which enables PIT microscopy of subsurface defects in high strength corrosion resistant stainless steel 316 alloy. PIT images were processed with UL spatial–temporal separation-based clustering segmentation (STSCS) algorithm, refined by morphology image processing methods to enhance visibility of defects. The STSCS algorithm starts with wavelet decomposition to spatially de-noise thermograms, followed by UL principal component analysis (PCA), fine-tuning optimization, and neural learning-based independent component analysis (ICA) algorithms to temporally compress de-noised thermograms. The compressed thermograms were further processed with UL-based graph thresholding K-means clustering algorithm for defects segmentation. The STSCS algorithm also includes online learning feature for efficient re-training of the model with new data. For this study, metallic specimens with calibrated microscopic flat bottom hole defects, with diameters in the range from 203 to 76 µm, were produced using electro discharge machining (EDM) drilling. While the raw thermograms do not show any material defects, using STSCS algorithm to process PIT images reveals defects as small as 101 µm in diameter. To the best of our knowledge, this is the smallest reported size of a sub-surface defect in a metal imaged with PIT, which demonstrates the PIT capability of detecting defects in the size range relevant to quality control requirements of LPBF-printed high-strength metals.

36 MATERIALS SCIENCE↗
DOE OSTI2026

High Compression Blue-Detuned Magneto-Optical Trap of Polyatomic Molecules

We demonstrate a blue-detuned magneto-optical trap (MOT) of a polyatomic molecule, calcium monohydroxide (CaOH). We identify a novel MOT frequency configuration that produces high spatial compression of the molecular cloud. This high compression MOT achieves a cloud radius of 59⁢(5) μ⁢m and a peak density of 8⁢(2) ×10 8 cm −3 . We experimentally compare several blue-detuned MOT schemes for CaOH and find good agreement between our data and Monte Carlo simulations.

Cold and ultracold molecules↗
DOE OSTI2025

Phase-based velocity extraction method for photonic Doppler velocimetry with potential higher time resolution

We present an extension of the [Takeda et al., J. Opt. Soc. Am. 72, 156 (1982)] phase extraction method to heterodyne photonic Doppler velocimetry applications. The method yields results equivalent to those obtained by the short-time Fourier transform (STFT), while offering potential improvements in time resolution. Unlike STFT, which relies on window functions, such as the Hamming window, that emphasize central data points and diminish the influence of edges, the extended Takeda method utilizes all data uniformly. This uniform treatment allows for the derivation of empirical equations that directly relate velocity error to the actual time resolution rather than to the local analysis duration. The established equation provides a useful metric for both optimizing hardware configuration and guiding data analysis. Simulation and experimental results confirm that, for a given dataset, specifying a target time resolution yields consistent velocity errors for both methods. These findings underscore the Takeda method’s advantages, particularly its potential higher time resolution and reduced computational burden, making it a valuable tool for high-throughput applications such as laser dynamic compression experiments.

Computer simulation↗
DOE OSTI2024

Laboratory-Based Micro-X-ray Computed Tomography of Energy Materials at Idaho National Laboratory

Abstract The Idaho National Laboratory (INL) has implemented laboratory-based micro-X-ray computed tomography in a laboratory equipped for the examination of highly radioactive samples. This capability provides nondestructive three-dimensional volumetric information on samples to inform subsequent traditional destructive examinations as well as real-world inputs for high-fidelity scientific modeling. Samples can be imaged with spatial resolutions ranging from several hundred nm/voxel up to ~ 100 µm/voxel. The best usable spatial resolution achieved to date is 384 nm/voxel with this instrument, while the highest radiological dose rate of a sample imaged is ~ 60 R/h β/γ on contact. Advanced data analysis, including custom tomographic reconstruction and segmentation methods, have also been developed to support this capability. In addition to traditional digital X-ray radiography and tomography, this instrument is also able to visualize in situ tensile and compression testing as well as perform diffraction contrast tomography. This work describes the X-ray computed tomography post-irradiation examination capabilities at INL, as well as detailing a variety of applications this instrument has examined.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Total X-ray scattering and big-box modeling of pressure-induced local disorder and partial amorphization in CsPbBr 3

The mechanisms governing pressure-induced amorphization and its reversibility in halide perovskites are not yet fully understood, particularly the contribution of local disorder. We performed high-pressure synchrotron total X-ray scattering and reverse Monte Carlo (RMC) big-box modeling using CsPbBr 3 as a model system to investigate short-range structural evolution in both the ordered and partially amorphous phases. While diffraction data indicate that long-range order persists up to 2 GPa, pair distribution function (PDF) analysis reveals significant local distortions, including PbBr 6 octahedral tilting and Cs displacement, which influence the bandgap through a complex interplay between bond compression and angular tilting. Beyond 2 GPa, CsPbBr 3 undergoes partial amorphization, with significant disordering of Cs and Br, while the Pb sublattice remains preserved, allowing for structural recovery upon decompression. Our work, accounting for both short- and long-range structural evolution through RMC modeling, successfully captures how disorder shapes the structural response of halide perovskites under pressure.

critical phenomena↗
DOE OSTI2026

High-pressure neutron powder diffraction study of an arsenolite deuterium inclusion compound: structure and formation kinetics

High-pressure variable-temperature neutron powder diffraction was employed to investigate the synthesis and structural properties of arsenolite (As 4 O 6 ), a cubic arsenic( III ) oxide polymorph, and its inclusion compound with deuterium. The compound forms with the stoichiometry As 4 O 6 ·2D 2 , consistent with earlier findings. At 295 K and 1.96(2) GPa, D 2 molecules occupy the 16c site (0, 0, 0) and are aligned along the <111> direction. The diffraction data suggest that the D 2 molecules at this site become rotationally disordered upon decompression to 0.78(2) GPa at 120 K, while no occupancy is observed at the 8a position (⅛, ⅛, ⅛) under any of the studied conditions. The kinetic data of the high-pressure inclusion compound synthesis at 1.56(2) and 1.96(2) GPa were analyzed using the Avrami model. The Avrami exponent, 0.135(16), remains invariant with pressure, demonstrating that the reaction topochemistry is unaffected by compression. Similarly, the reaction rates, 0.29(3) and 0.23(3) min −0.135 at 1.56(2) and 1.96(2) GPa, respectively, exhibit negligible pressure dependence and suggest a surprisingly low activation volume of 1.6 cm 3 mol −1 for the reaction. These results provide detailed insight into the structural dynamics and kinetics of deuterium inclusion in arsenolite under high pressure.

Guńka, Piotr A. [Warsaw University of Technology (↗
DOE OSTI2026

Thermal images collected during 3D printing with Cincinnati BAAM

This data set contains images produced to test the performance of anomaly and fault detection methods in the context of additive manufacturing. A total of 10 print jobs were executed using a Cincinnati BAAM (model 606) with a Cincinnati medium compression screw. The material used was compounded polylactic acid (PLA) with wood flour as a filler produced by Jabil (80% NatureWorks Ingeo 6060D amorphous PLA, % 100 mesh pine flour from American Wood Fiber). Print sheets were 1/4in polycarbonate.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Uniaxial compressive creep tests by spark plasma sintering of 70% theoretical density α -uranium and U-10Zr

Metallic fuels hold numerous advantages over conventional uranium dioxide fuels and are a key component of several liquid metal-cooled advanced reactor concepts including sodium fast reactors. These fuels undergo rapid swelling during early burnup; consequently, they spend most of their reactor lifetime in a porous state. The presence of this porosity alters many of the mechanical properties of the fuel including creep impacting fuel deformation during axial swelling. This work investigates the creep behavior of the porous fuel using a spark plasma sintering technique. Creep tests were performed for the first time on porous α-phase uranium and uranium with 10 wt. % zirconium (U-10Zr) samples. The samples of α-phase uranium and U-10Zr were fabricated from depleted uranium by spark plasma sintering and subjected to uniaxial compressive creep testing. Calculated stress exponents were found to be 2.6±1.6 and 5.7±1.4 for α-U and U-10Zr, respectively, and calculated activation energies were found to be 61.6±1.1kJ/mol for α-U. The creep data were also used to evaluate existing porosity inclusive in creep models.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Glassy carbon formation from pyrolysis of polymeric coatings on fiber-optic sensors

Deploying fiber-optic sensors in nuclear reactors requires a detailed understanding of radiation effects on the fiber materials and the transmitted signals. Previous work has shown large wavelength shifts in the reflected spectra obtained from polymer-coated fiber-optic temperature sensors exposed to high neutron fluences. The sensor drift resulting from these wavelength shifts cannot be explained by radiation effects on fused silica glass. These shifts are hypothesized to be caused by the conversion of the polymeric fiber coating to a glassy carbon via radiolysis and/or pyrolysis and subsequent radiation-induced compaction. Here, thermal degradation of these polymeric coatings was studied to provide insight into the potential origins of the sensor drift phenomenon. Acrylate- and polyimide-coated fibers were heated under various temperatures (250–1300 °C) and environments (oxidative and inert), and the resulting coating products were characterized via mass-loss data, scanning electron microscope imaging, and Raman spectroscopy. Results suggest that the polymer decomposition product of both coating types, at least under inert conditions, is indeed a glassy carbon. Analytical models that account for radiation-induced glassy carbon coating compaction show significant compressive fiber strains and predicted wavelength shifts that agree well with experimental measurements, providing additional evidence that supports the hypothesized origins of the sensor drift.

36 MATERIALS SCIENCE↗