Search NASA⌕ Search

SEARCH · Search NASA

Results for “Metallic systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Self-assembled Ag(111) nanostructures induced by Fermi surface nesting

Scanning tunneling microscopy measurements on Ag(111)/MoS 2 reveal atomically flat preferred, or “magic,” heights occurring at 6, 10, and 14 atomic layers. We note these results are consistent with Ag growth on a variety of semiconducting substrates and correlate with electronic energy savings in electronic structure calculations of freestanding Ag(111) films. Thus, under certain conditions, Ag will spontaneously form quantized structures independent of the substrate. To explain this, we have found Fermi surface nesting vectors in the bulk Ag band structure which account for these results and the fact Ag that is gapped along the surface normal. This model extends to a range of metallic systems which exhibit electronic confinement, epitaxial growth, and minimal strain. As with Au/MoS 2 , the Ag/MoS 2 system exhibits this behavior at unusually high temperatures so that these principles might be used for control over device features at the nanometer scale under standard fabrication conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Averaged cluster approach to including chemical short-range order in KKR-CPA

The single-site Korringa-Kohn-Rostoker coherent potential approximation (KKR-CPA) ignores short-range ordering present in disordered metallic systems. Here in this paper, we establish a technique to fix this shortcoming by embedding an averaged cluster that displays chemical short-range order (SRO). The degree of SRO can be tuned by externally defined order parameters. This averaged cluster can be embedded in the single-site CPA medium or a self-consistently obtained effective medium that contains SRO information. The validity of this method is demonstrated by applying it to two alloy systems—the CuZn body-centered cubic (BCC) solid solution, and AlCrTiV, a four-element BCC high entropy alloy. A comparison between the non-self-consistent and self-consistent modes is also provided for the two above-mentioned systems. We make the code available on the internet. Planned extensions to this paper are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Electronic correlations in the semiconducting half-Heusler compound FeVSb

Electronic correlations are crucial to the low-energy physics of metallic systems with localized d and f states; however, their effect on band insulators and semiconductors is typically negligible. Here, we measure the electronic structure of the half-Heusler compound FeVSb, a band insulator with a filled shell configuration of 18 valence electrons per formula unit ( s 2 p 6 d 10 ). Additionally, angle-resolved photoemission spectroscopy reveals a mass renormalization of m * / m bare = 1.4 , where m * is the measured effective mass and m bare is the mass from density functional theory calculations with no added on-site Coulomb repulsion. Our measurements are in quantitative agreement with dynamical mean-field theory calculations, highlighting the many-body origin of the mass renormalization. This mass renormalization lies in dramatic contrast to other filled shell intermetallics, including the thermoelectric materials CoTiSb and NiTiSn, and has a similar origin to that in FeSi, where Hund's coupling induced fluctuations across the gap can explain a dynamical self-energy and correlations. Our work calls for a rethinking of the role of correlations and Hund's coupling in intermetallic band insulators.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Magnetic phase transition, magnetoresistance, and anomalous Hall effect in Ga-substituted Y Mn 6 Sn 6 with a ferromagnetic kagome lattice

The HfFe 6 Ge 6- type RMn 6 Sn 6 , a metallic system consisting of ferromagnetic kagome planes of Mn, has been recently shown to be a candidate hosting topological electronic properties. In this paper, we report magnetic and electronic properties in Y Mn 6 Sn 6-x Ga x single crystals via magnetic susceptibility, electrical transport, and single-crystal neutron diffraction measurements. We show that the magnetic ground state of Y Mn 6 Sn 6-x Ga x (0 ≤ x ≤ 0.61 ) evolves from incommensurate antiferromagnet to ferromagnet with increasing Ga substitution x, a feature which is accompanied by the decrease in magnetoresistance. Furthermore, the topological Hall effect observed in the pristine compound is absent in the Ga-substituted ones; instead, the anomalous Hall effect persists which may be associated with the Berry curvature of gapped Dirac bands near the Fermi energy. These results suggest strong correlation between electronic properties and magnetism in this topological magnet that can be readily tuned via Ga substitution.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

$\textit{J}$ = 0 nonmagnetic insulating state in K 2 OsX 6 ($\textit{X}$ = F, Cl, and Br)

In 4$\textit{d}$ /5$\textit{d}$ transition-metal systems, many interesting physical properties arise from the interplay of bandwidth, electronic correlations, and spin-orbit interactions. Here, using ab initio density functional theory, we systematically study the double-perovskite-like system K 2 OsX6 ($\textit{X}$ = F, Cl, and Br) with a $5d^4$ electronic configuration. In this work, our main result is that the $\textit{J}$ = 0 nonmagnetic insulating state develops in this system, induced by strong spin-orbit coupling (SOC). Specifically, the well-separated OsX 6 octahedra lead to the cubic crystal-field limit and result in dramatically decreasing hoppings among nearest neighbor Os-Os sites. In this case, the three degenerate $t_{2g}$ orbitals are reconstructed into two “effective” $j_{\text{eff}}$ ($j_{\text{eff}}$ = 1/2 and $j_{\text{eff}}$ = 3/2 states) states separated by the strong SOC, opening a gap with four electrons occupying the$j_{\text{eff}}$ = 3/2 orbitals. Furthermore, the hybridization between the Os 5$\textit{d}$ orbitals and the $\textit{X}$ ($\textit{X}$ = F, Cl, and Br) $\textit{p}$ orbitals increases from F to Br, leading the electrons in K 2 OsF 6 to be more localized than in K 2 OsCl 6 and K 2 OsBr 6 , resulting in a smaller bandwidth for K 2 OsF 6 than in the Cl- or Br-cases. Our results provide guidance to experimentalists and theorists working on this interesting family of osmium halides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Fluctuating Ru trimer precursor to a two-stage electronic transition in RuP

Superconductivity in binary ruthenium pnictides occurs proximal to and upon suppression of a non-magnetic ground state, preceded by a pseudogap phase associated with Fermi surface instability, and its critical temperature, T c , is maximized around the pseudogap quantum critical point. By analogy with isoelectronic iron based counterparts, antiferromagnetic fluctuations became ''usual suspects" as putative mediators of superconducting pairing. Here we report on a high temperature local symmetry breaking in RuP, nonsuperconducting parent of the maximum- T c branch of these novel superconductors, revealed by combined nanostructure-sensitive powder and single crystal X-ray total scattering analyses. Large local distortions of Ru chains associated with orbital-charge trimerization, further assembled into hexamers, exist above the two-stage electronic transition in RuP. In the pseudogap regime the precursors order with distortions retaining their strength, whereas they acquire spin-singlet characteristics which dramatically enhances the distortion as the nonmagnetic ground state establishes. The precursors enable the nonmagnetic ground state and presumed complex oligomerization, and the relevance of pseudogap fluctuations for superconductivity emerges as a distinct prospect. As a transition metal system in which partial d-manifold filling combined with high crystal symmetry promotes electronic instabilities, this represents a further example of local electronic precursors underpinning the macroscopic collective behavior of quantum materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Spin-density-wave order controlled by uniaxial stress in CeAuSb 2

We report the tetragonal heavy-fermion compound CeAuSb 2 (space group P4/nmm ) exhibits incommensurate spin-density wave (SDW) order below T N ≈ 6.5 K with the propagation vector q A = (δ A , δ A , 1/2 ). The application of uniaxial stress along the [010] direction induces a sudden change in the resistivity ratio ρ a /ρ b at a compressive strain of ε ≈ - 0.5 %. Here we use neutron scattering to show that the uniaxial stress induces a first-order transition to a SDW state with a different propagation vector (0, δ B ,1/2) with δ B = 0.25.The magnetic structure of the new (B) phase consists of Ce layers with ordered moments alternating with layers with zero moment stacked along the c axis. The ordered layers have an up-up-down-down configuration along the b axis. This is an unusual situation in which the loss of spatial inversion in a metallic system is driven by the magnetic order. We argue that the change in SDW wave vector leads to Fermi-surface reconstruction and a concomitant change in the transport properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Origin of anomalous magnetotransport in kagome superconductors 𝐴⁢V 3 ⁢Sb 5 (𝐴 = K,Rb,Cs)

Multiple anomalous features in electronic spectra of metals with a kagome lattice structure—van Hove singularities, Dirac points, and flat bands—imply that materials containing this structural motif may lie at a nexus of topological and correlated electron physics. Due to the prospects of such exceptional electronic behavior, the recent discovery of superconductivity coexisting with charge-density wave (CDW) order in the layered kagome metals 𝐴⁢V 3 ⁢Sb 5 (𝐴 = K,Rb,Cs) has attracted considerable attention. Notably, these archetypal kagome metals express unconventional magnetotransport behavior, including an unexpected linear-in-𝐻 diagonal resistivity at low fields, and an even more peculiar, nonmonotonic sign-changing behavior of the Hall resistivity, which has been speculated to arise from a chiral CDW. We argue here that this unusual magnetotransport derives not from such unconventional phenomena, but rather from the unique fermiology of the 𝐴⁢V 3 ⁢Sb 5 materials. Specifically, it is caused by a large, concave hexagonal Fermi surface sheet formed in the close proximity to the van Hove singularities, which is backfolded into a small hexagonal sheet and two large triangular sheets in the CDW state. We introduce and analyze a model of the electronic structure of these Fermi surface sheets that allows for a full analytical treatment within Boltzmann kinetic theory and that enables semi-quantitative fits of our transport data. Specifically, we find that the anomalous magnetotransport behavior is caused by the confluence of strong reduction of the Fermi velocity near the van Hove singularities located near the vertices of the hexagonal sheet and sharp corners in Fermi surface generated by the CDW reconstruction. In conclusion, our analytical approach not only explains the anomalous magnetotransport in the kagome superconductors but also can be extended to a variety of metallic systems hosting singular features in their Fermi surfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Observation of Seeded Mn K β Stimulated X-Ray Emission Using Two-Color X-Ray Free-Electron Laser Pulses

Kβ x-ray emission spectroscopy is a powerful probe for electronic structure analysis of 3d transition metal systems and their ultrafast dynamics. Selectively enhancing specific spectral regions would increase this sensitivity and provide fundamentally new insights. Recently we reported the observation and analysis of Kα amplified spontaneous x-ray emission from Mn solutions using an x-ray free-electron laser to create the 1s core-hole population inversion [Kroll et al., Phys. Rev. Lett. 120, 133203 (2018)]. To apply this new approach to the chemically more sensitive but much weaker Kβ x-ray emission lines requires a mechanism to outcompete the dominant amplification of the Kα emission. Here we report the observation of seeded amplified Kβ x-ray emission from a NaMnO 4 solution using two colors of x-ray free-electron laser pulses, one to create the 1s core-hole population inversion and the other to seed the amplified Kβ emission. Comparing the observed seeded amplified Kβ emission signal with that from conventional Kβ emission into the same solid angle, we obtain a signal enhancement of more than 10 5 . Finally, our findings are the first important step of enhancing and controlling the emission of selected final states of the Kβ spectrum with applications in chemical and materials science.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Anisotropic magnetism of polymorphic ErAl 3

ErAl 3 can form in either a trigonal (α) or cubic (β) polymorph and this paper investigates the physical properties of these polymorphs through characterizations of single crystals grown in an aluminum flux. Here, we demonstrate that polymorph selection can be achieved based on the nominal composition of the crystal growth. Magnetic measurements confirm that both β-ErAl 3 and α-ErAl 3 order antiferromagnetically at low temperatures. β-ErAl 3 undergoes antiferromagnetic ordering at a Néel temperature T N = 5.1 K, and the transition is suppressed continually with applied field. α-ErAl 3 displays more complex behavior, with successive magnetic transitions at T N = 5.7 K and T 2 = 4.6 K for zero field, where heat capacity and dilatometry measurements evidence that these transitions are second and first order, respectively. Under magnetic field, strong anisotropy is revealed in α-ErAl 3 , with several steplike metamagnetic transitions observed below T 2 for H ∥ c. These transitions produce sequential magnetization plateaus near one-half of the apparent saturation magnetization. The electrical resistivity of α-ErAl 3 is strongly coupled to its magnetism. At T = 2 K, we observe a positive magnetoresistance reaching 60%, with distinct anomalies at the metamagnetic transitions. The results are summarized in H-T phase diagrams that demonstrate complex magnetic behavior for α-ErAl 3 , suggesting an important role of competing interactions in this metallic system that possesses characteristics of Ising physics.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Anti-Coulomb ion-ion interactions: A theoretical and computational study

The free energy of ion solvation can be decomposed into enthalpic and entropic contributions. This helps one to understand the connection between the dielectric properties and the underlying forces. We present a simple linear-response model of screened charge interactions that provides an alternative understanding of solvation barriers. Moreover, it explains the “anti-Coulomb” interactions (attraction between like-charged ions and repulsion between opposite-charged ions) observed in both simulations and experiments. We show that this is a universal behavior associated to the nonlocal response function of any dielectric or metallic systems. Published by the American Physical Society 2024

Wills, Alec (ORCID:0000000280184692)↗
DOE OSTI2022

First demonstration of tuning between the Kitaev and Ising limits in a honeycomb lattice

Recent observations of novel spin-orbit coupled states have generated interest in 4d/5d transition metal systems. A prime example is the J eff = $\frac{1}{2}$ state in iridate materials and α-RuCl 3 that drives Kitaev interactions. Here, by tuning the competition between spin-orbit interaction (λ SOC ) and trigonal crystal field (Δ T ), we restructure the spin-orbital wave functions into a previously unobserved μ = $\frac{1}{2}$ state that drives Ising interactions. This is done via a topochemical reaction that converts Li 2 RhO 3 to Ag 3 LiRh 2 O 6 . Using perturbation theory, we present an explicit expression for the μ = $\frac{1}{2}$ state in the limit Δ T ≫ λ SOC realized in Ag 3 LiRh 2 O 6 , different from the conventional J eff = $\frac{1}{2}$ state in the limit λ SOC ≫ Δ T realized in Li 2 RhO 3 . The change of ground state is followed by a marked change of magnetism from a 6 K spin-glass in Li 2 RhO 3 to a 94 K antiferromagnet in Ag 3 LiRh 2 O 6 .

36 MATERIALS SCIENCE↗
DOE OSTI2025

Anisotropic strain relaxation-induced directional ultrafast carrier dynamics in RuO 2 films

Ultrafast light-matter interactions inspire potential functionalities in picosecond optoelectronic applications. However, achieving directional carrier dynamics in metals remains challenging due to strong carrier scattering within a multiband environment, typically expected for isotropic carrier relaxation. In this study, we demonstrate epitaxial RuO 2 /TiO 2 (110) heterostructures grown by hybrid molecular beam epitaxy to engineer polarization selectivity of ultrafast light-matter interactions via anisotropic strain engineering. Combining spectroscopic ellipsometry, x-ray absorption spectroscopy, and optical pump-probe spectroscopy, we revealed the strong anisotropic transient optoelectronic response at an excitation energy of 1.58 eV in strain-engineered RuO 2 /TiO 2 (110) heterostructures along both in-plane [001] and [1$\bar1$0] crystallographic directions. Theoretical analysis identifies strain-induced modifications in band nesting as the underlying mechanism for enhanced anisotropic carrier relaxation observed at this excitation energy. These findings establish epitaxial strain engineering as a powerful tool for tuning anisotropic optoelectronic responses with near-infrared excitations in metallic systems, paving the way for next-generation polarization-sensitive ultrafast optoelectronic devices.

Science & Technology - Other Topics↗
DOE OSTI2020

HPC4Mfg with Samsung: Making semiconductor devices cool through HPC ab initio simulations

For decades, the semiconductor technology has followed the Moore’s law, making newer devices more powerful and energy efficient. Recently, however, it has reached a point where the performance and the energy efficiency of the device do not improve with the shrinking device size. One of the fundamental reasons of this deviation from the past trend is the interconnect resistance, which becomes larger with the shrinking size. The devices size is so small that the quantum mechanical effects can no longer be ignored and the traditional continuum simulation tools such as TCAD become inadequate. In this project, Samsung Semiconductor Inc. and Lawrence Berkeley National Laboratory has collaborated to perform first of kind device-scale ab initio simulations to optimize materials and interconnect morphology to minimize interconnect resistance. We have tested the use of LS3DF method and the PEtot_trans approach on top of the folded spectrum method (FSM) Escan code to calculate the scattering state, and to study various effects influence the interconnect conductivity. We found that, the LS3DF can be used to calculate such metallic system. On the other hand, the use of Escan code to solve the linear equation is not practical due to the slow convergence. We have implemented a Chebyshev filter technique to calculate a few hundred eigen states near the scattering state energy E, then use these eigen states as preconditioner to solve the linear equation. We have used this approach to study the different factors which affect the interconnect conductivity, including the shape, the point defect, the temperature, and the grain boundary.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

Multiscale Approach to Fast ModSim for Laser Processing of Metals for Future Nuclear Deterrence Environments

Predicting performance of parts produced using laser-metal processing remains an out- standing challenge. While many computational models exist, they are generally too computationally expensive to simulate the build of an engineering-scale part. This work develops a reduced order thermal model of a laser-metal system using analytical Green's function solutions to the linear heat equation, representing a step towards achieving a full part performance prediction in an "overnight" time frame. The developed model is able to calculate a thermal history for an example problem 72 times faster than a traditional FEM method. The model parameters are calibrated using a non-linear solution and microstructures and residual stresses calculated and compared to a non-linear case. The calibrated model shows promising agreement with a non-linear solution.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Reactivity of a Cube, Cylinder, and Sphere

A water-reflected cube of dry plutonium oxide is found to be more reactive than a sphere of the same mass and composition. MCNP6 ® criticality results for a cube, sphere, and cylinder of identical density, mass, and volume are discussed in the context of several hydrogenous reflectors. Similar geometric comparisons are made for a fast metal system based on 240 Pu Jezebel.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Laboratory-Scale Coal-Derived Graphene Process (Final Report)

The Energy & Environmental Research Center (EERC) conducted a laboratory-scale coal-derived graphene (CDG) project focused on developing a technological process for making graphene from four U.S. domestic coal or coal wastes, including lignite from North Dakota, subbituminous coal from Wyoming, bituminous coal from Utah, and anthracite from Pennsylvania. The project was divided into two performance or budget periods (BPs), with BP1 comprising the up-front laboratory experiments to make graphene materials from coal beginning on May 1, 2020, to April 30, 2022. BP2 was conducted from May 1, 2022, to April 30, 2023, and was focused on analyzing the CDG process economic feasibility and the technical gaps for technological scale-up and commercialization. During this project, a few different coal-derived high-value products have been demonstrated, including graphite, graphene oxide (GO), reduced graphene oxide (rGO), and graphene quantum dots (GQDs). A new graphite microstructure was discovered and named “croissant graphite” because of the exterior morphological and textural resemblance to croissant food items sold in commercial groceries stores. The new graphite structure and the associated preparation from coal or coal waste feedstocks has been the subject of a U.S. patent application. The systematic experimental processes involving coal cleaning, upgrading, and conversion to high-value carbon products culminated into a developed upgraded coal-to-products (UCP) technology that is being pursued for potential fast-track commercialization, if funding is available. It is envisioned that commercialization of the UCP technology would increase consumption of U.S. domestic coals or coal wastes to make environmentally sustainable high-value products for the electronics industry, high-energy-storage applications, and clean energy technologies such as electric vehicle (EV) lithium-ion batteries (LIBs), for which graphite has become a critical mineral commodity. Croissant graphite microstructures, when observed by field emission scanning electron microscopy (FESEM), display wavy surface morphology and often grow from a base that is made of graphitized particles with honeycomb-like layers, which are believed to be graphene layers. While more studies are needed to fully ascertain the mechanisms of the croissant graphite microstructure formation, it is postulated that their growth may begin from curling of the graphene sheets into ribbon-like structures, and continuous growth and densification of the ribbon-like structures forms croissant microstructures. Additional studies are ongoing to evaluate the electrochemical performance of croissant graphite for LIB applications and to determine the experimental conditions necessary to tune on/off croissant formation so that it can be either optimized or suppressed depending on performance evaluation results. In addition to the discovery of croissant graphite, the graphitization process from the four coal ranks in general was successful. X-ray diffraction (XRD) analysis showed that the degree of graphitization (DoG) ranged from 12% to 80% in an early sample set, and further optimization on lignite coal produces a DoG of about 92%, which was spectacular to see as lignite is the lowest-rank coal. Thus, it is expected that the graphitization performance for higher-rank coals will be similar or better when optimized as well. The coal-derived graphite was used to make GO and rGO. Analytical characterization, e.g., by methods such as Raman spectroscopy, XRD, Fourier transform infrared (FTIR) spectroscopy and FESEM, showed that the sequence of converting the coal to graphite, exfoliating it to GO, and then chemically reducing the GO to rGO was successful. Although coal naturally contains aromatic compounds and some relatively small-sized condensed aromatic units, it does not contain graphene sheets. In the UCP process, the aromatic domains in the coals, particularly low-rank coals, are concentrated and condensed further into graphene sheets, which are ordered into a 3D stack during graphitization. The synthesized graphite is then unpacked by methods such as exfoliation to various graphene products. GQDs were synthesized from all four coal types, and their optical properties were demonstrated to be tunable by the coal precursor preprocessing treatments. In all four coal types, enhanced optical properties were observed for the produced GDQs with incremental improvements made to the coal precursors. GQDs produced from raw coal samples displayed lower ultraviolet–visible (UV–Vis) spectroscopy absorbance intensity compared to those obtained from cleaned and upgraded coal residues. The photoluminescence (PL) intensities also varied with pretreatment conditions and with the concentration of GQDs in aqueous solutions. GQDs obtained from anthracite show longer emission wavelengths and can be excited by visible light as opposed to GQDs derived from the other coal ranks. UV fluorescence 3D maps and spectra revealed that the emission wavelength at which the GQDs solutions display the highest intensity was slightly redshifted based on the coal precursor pretreatments. In low-rank coal (lignite and subbituminous) samples, two clusters were observed in the maps for GQDs, which may suggest that there are potentially two types of fluorophores in solution or two main size populations. The ability to tune the properties of GQDs based on processing methods can be exploited to make GQDs for various optical display or optoelectronics applications. The results also highlight the importance of removing coal-borne impurities to improve the quality of the coal precursor for preparation of graphene products. Coal and/or coal wastes preprocessing methods were developed and applied to clean and upgrade the coal precursors prior to graphitization and subsequent conversion to graphene products. The preprocessing methods involve high specific-gravity separations, mineral acid cleaning (no hydrofluoric acid), and subsequent upgrading by reducing the coal-borne heteroatom (nitrogen, sulfur, and oxygen) content using proprietary chemical agents. Analytical characterization revealed that the preprocessing steps were successful, with ash reductions that range from 38% to 80% and residual ash content that was below the 5 wt% initial target. Based on proximate and ultimate analysis, the heteroatom reduction reactions produced upgraded coal residues with the oxygen content reduced by 8% to 24%, with additional reductions in the nitrogen and sulfur contents. An initial assessment of the waste streams from the UCP process shows very small to negligible environmental impact due to CO 2 , NO x , and SO x because most process steps are performed under inert atmosphere with argon. Consequently, reactive oxygen environments that tend to create these species are avoided. The inorganic and potentially hazardous species are released into aqueous waste streams that are easy to handle for proper disposal. The liquid waste streams were found to contain low-level concentrations of rare-earth elements (REEs), which could be concentrated and recovered as value-added by-products. Additionally, the volatile and gaseous fractions from carbonization and heat treatment contain useful organic compounds that can also be recovered as potential valuable by-products. Thus, the UCP technology is considered an environmentally sustainable and promising emerging technology for making high-value products from coal and coal wastes, with potential additional value-added by-products. Analysis of potential markets for the coal-derived carbon products shows a strong demand in both niche market sectors and across a wide variety of other industrial sectors. Graphite is currently considered a critical mineral commodity that has a large and growing demand in the LIB industry for EV applications. Based on data from Fortune Business Insights (2022) and Marketwatch (2023) reports, the average global graphite market is projected to reach about 33 billion by 2028, growing at a compound annual growth rate (CAGR) of about 7%, with much of this growth expected to be in the LIB industry. GO and rGO have strong market potentials in various application areas, such as coatings for anticorrosion, anti-icing, and antimicrobial protection, thermal barriers, wear resistance, sensors, additive manufacturing such as 3D inks, and others. GQDs are the emerging key player in the bioimaging, photovoltaics, and light-emitting diodes (LEDs) applications, with the potential to replace traditional semiconductor quantum dots (SQDs), which are based on metallic systems that are more toxic and more expensive. Biomedical applications of GQDs are becoming more attractive because of low to no toxicity and extremely low cost compared to SQDs. The major challenges for scale-up and commercialization of coal-derived carbon products such as graphene vary from the inherent attributes of graphene itself to reluctance to accept graphene in new manufacturing processes because of the uncertainty of the unknown. The 2D nature of graphene materials with a thickness of one atom presents significant challenges to proper handling/processing, and process scale-up becomes difficult because it requires high-end, expensive equipment, even for routine handling and analysis for quality assurance and control. Pristine graphene can also be extremely difficult to work into other matrices, thus hindering downstream processibility, especially at large scale. Currently, the cost of graphene and graphene products is still high and presents an economic risk that tends to slow down investment in scaling up emerging technologies. The lack of a standard for graphene materials for quality assurance and quality control poses a great challenge not only for the markets but also for commercialization efforts. A first-look economic feasibility analysis of the UCP technology provided valuable information that suggests the UCP process would be feasible, especially when it is scaled to a pilot scale and could be more competitive at the full scale. Graphitization was found to be the most energy-consuming and most capital-intensive step in the overall process. In small laboratory- and bench-scale experiments, labor is a significant contributor to the total process costs. Although these energy, capital, and labor constraints contribute to a higher selling price for the product, a preliminary economic model suggests that the process would be feasible at large scale when the process is fully integrated, optimized, and automated.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2024

Sub-Critical “Hands On” Demonstration [Slides]

Objectives: understand how the factors that affect criticality safety relate to working “hands on” with plutonium metal systems, including density, isotopic composition, moderating reflectors, absorbing reflectors. Understand the criticality safety implications for threshold fissioners.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗