Search NASA⌕ Search

SEARCH · Search NASA

Results for “Nickel oxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Toward a high-voltage fast-charging pouch cell with TiO 2 cathode coating and enhanced battery safety

Nickel-rich layered lithium transition metal oxides, LiNi x Co y Mn 1-x-y O 2 , are key cathode materials for high-energy lithium-ion batteries owing to their high specific capacity. However, the commercial deployment of nickel-rich oxides has been hampered by their poor thermostability and insufficient cycle life. In this work full batteries with uncoated and TiO 2 -coated LiNi 0.5 Co 0.2 Mn 0.3 O 2 cathodes and graphite anodes are compared in terms of electrochemical performance and safety behavior. The battery using a TiO 2 -coated LiNi 0.5 Co 0.2 Mn 0.3 O 2 cathode exhibited better cyclic performance at high cutoff voltage. Electrochemical impedance spectroscopy analysis indicated that the TiO 2 -coated LiNi 0.5 Co 0.2 Mn 0.3 O 2 cathode gave the battery a more stable charge transfer resistance. Transmission electron microscopy demonstrated that TiO 2 coating reduced accumulation of the cathode electrolyte interface layer on the particle surface. Time-of-flight secondary ion mass spectrometry demonstrated that TiO 2 coating markedly enhanced the interface stability of the cathode particle and protected the particle from serious etching by the electrolyte. Accelerating rate calorimetry revealed that the trigger temperature of thermal runaway for the battery using TiO 2 -coated LiNi 0.5 Co 0.2 Mn 0.3 O 2 as cathode material was 257 °C, which was higher than that of the battery with the uncoated LiNi 0.5 Co 0.2 Mn 0.3 O 2 cathode (251 °C). In situ X-ray diffraction during heating demonstrated that this enhanced safety can be attributed to the suppressed phase evolution of the coated cathode material.

25 ENERGY STORAGE↗
DOE OSTI2021

Siloxane Deposition on the Ni-YSZ Solid Oxide Fuel Cell Anode Exposed to Bio-Syngas

Siloxane, a common contaminant present in biogas, is known for adverse effects on cogeneration prime movers. In this study, the siloxane deposition products and mechanism in the solid oxide fuel cell nickel-yttria stabilized zirconia (Ni-YSZ) anode are investigated analytically and experimentally. An SOFC with Ni-YSZ anode and pure Ni/YSZ pellets were exposed to a simulated biogas-reformate fuel with octamethylcyclotetrasiloxane (D4) contamination at 750 °C. The electrochemical characterization results show that the SOFCs performance degradation caused by D4 contamination is irreversible. Morphology and XRD results illustrate that silicon and carbon deposition can both be detected in the anode and pellets. Graphite, SiC and SiO2 are all possible products based on the results of XRD test. Here, according to the formation of graphite and SiC, the new mechanism suggests that carbon is also an essential factor in siloxane contamination of Ni-YSZ anodes besides silicon, which can be explained by the catalytic and electrochemical analysis.

25 ENERGY STORAGE↗
DOE OSTI2025

Development and characterization of an aerosol-generated multi-method analytical particle test material

Ceria (CeO 2 ) particles with low to ultra-low loading of nickel dopant were produced using an aerosol-based, droplet-to-particle synthesis via an in-line calcination technique. This aerosol-based synthesis method enables the production of particles with a monodisperse size distribution. These produced and well-characterized, multi-element, ceria-based particles demonstrate a material exemplar for multi-method analytical testing. They were prepared from a cerium nitrate feedstock where low loading nickel dopant was added at target Ni/(Ni + Ce) atomic percents of 1 %, 0.1 %, and 0.01 %, using a nickel nitrate spike. This methodology proved to produce ceria particles doped with a dynamic range of low to ultra-low loadings of nickel over a 24-h period, with consistent size distribution, morphology, and composition. The successful incorporation of nickel was demonstrated with bulk and single particle inductively coupled plasma mass spectroscopy and revealed notable particle-to-particle elemental homogeneity. X-ray photoelectron spectroscopy demonstrated the presence of a high concentration of nickel dopant incorporated preferentially toward the surface of the particles, and that this dopant aided oxidation of surface Ce(III) atoms to Ce(IV). These particle test materials were then validated through X-ray absorption near edge spectroscopy, comparing the ultra-low 0.01 % Ni and low 1 % Ni-doped ceria samples. This revealed a more-reduced oxidation state of the nickel with an increase in dopant concentration. Finally, this work demonstrates a synthesis and systematic characterization scheme to produce multi-method analytical test particulates.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Metal oxide supported Ni-impregnated bifunctional catalysts for controlling char formation and maximizing energy recovery during catalytic hydrothermal liquefaction of food waste

Nickel (Ni)-impregnated metal oxide catalysts, Ni/CeZrO x , Ni/ZrO 2 , and Ni/CeO 2 , were investigated to maximize energy recovery and reduce char yield during catalytic hydrothermal liquefaction (CHTL) of food waste. Yields of char, biocrude, water soluble products, and gas were measured at 300 °C and 1 hour for both the parent oxides (CeZrO x , ZrO 2 , and CeO 2 ) and the Ni-impregnated versions. Using Ni-based catalysts reduced the carbon-weighted char yield from 16–24% to <10% and decreased the energy recovery of char from 39–47% to <21%, as compared with control tests. In particular, using Ni/ZrO 2 resulted in the greatest biocrude yield, greatest reduction of char yield, and greatest energy recovered as biocrude (39.2%). After factoring in all forms of usable energy produced from food waste, the total energy recovery obtained for the catalysts studied here was >60%. Ni/ZrO 2 and Ni/CeO 2 show the greatest potential for controlling char growth and maximizing energy recovered from food waste. The crystalline structures of all three oxides were hydrothermally stable. Catalyst reuse tests indicate that the biocrude and char yields remained the same for the first and second use (within uncertainty) and that the catalyst retains its initial crystallinity and 93% of its initial Ni content. Molecular composition of biocrudes analyzed by the state-of-the-art analytical platforms (including GC-MS, GC × GC, FT-ICR MS, and 1H NMR) revealed minor differences in the chemical constituents of biocrudes obtained using different catalysts and provided some insight regarding reaction mechanism.

09 BIOMASS FUELS↗
DOE OSTI2020

Entering the Nickel Age of Superconductivity.

After a 30-year quest, researchers found a nickel-based analog of copper oxide superconductors. The discovery motivates the search for other nickelates and should provide new insights into the origin of high-temperature superconductivity.

Norman, Michael R.↗
DOE OSTI2021

Evaluating the efficacy of aluminide coatings to improve oxidation resistance of high performance engine valve alloys

Increasing peak cylinder pressures and operating temperatures of turbo-charged internal combustion engines (ICEs) engines present new challenges for existing materials employed in engine exhaust valves. Oxidation induced degradation of current Ni based alloys for these components will be a life-limiting mechanism while strict cost margins in the automotive transportation industry further limit the choice of suitable candidate materials. Metallic diffusion aluminide coatings can provide a cost-effective way to improve the oxidation resistance of underlying materials. In this study, the high temperature oxidation behavior of diffusion nickel aluminide coatings on two Ni based alloys (commercially available alloy 31V and a developmental alloy) during cyclic oxidation behavior in air+10% H 2 O at 900 °C was investigated. A complete depletion of the beneficial Al-rich β-(NiFe)Al phase was observed in the coating on alloy 31V while a significant fraction of this phase was retained in the coating on the second alloy. A coupled thermodynamic-kinetic model showed that the disappearance of the Al-rich phase in the coating on 31V was mainly due to the combined effect of steeper chemical potential gradients of Al and Ti between the coating and the substrate and their faster diffusivities compared to the coated developmental alloy. Finally, a higher content of Fe was shown to support the retention of β-(NiFe)Al phase in the coating on the developmental alloy while the presence of Ti in the alloy was shown to be detrimental for long-term coating performance.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Synthesis and electronic characterization of Nd2−xSrxNiO4 thin films (0≤x≤1.4)

Layered nickelates have been studied extensively over the last three decades due to their structural similarities to the high-Tc superconducting cuprates. Using reactive oxide molecular beam epitaxy (MBE), we synthesize Nd2−xSrxNiO4 thin films for x=0−1.4 to probe the properties and electronic structure as a function of hole doping. The samples with lower doping show semiconducting behavior across the temperatures probed with an onset of metallic conductivity at x=1.4. We also present polarization-dependent O K and Ni L2,3 x-ray absorption spectra to track the evolution of the oxygen-nickel hybridization, distribution of holes between O 2p and Ni 3d states and the nickel oxidation state across the series. Angle-resolved photoemission spectroscopy (ARPES) measurements reveal a Fermi surface that comprises a cupratelike hole pocket of dx2−y2 character with an additional electron pocket of d3z2−r2 character at Γ. The emergence of a quasiparticle peak at the Fermi vector for x=1.4 corroborates the insulator-to-metal transition at x∼1. Finally, observe a fully two-dimensional Fermi surface with no momentum-dependent pseudogap, in contrast to measurements of the related bulk compound, Eu0.9Sr1.1NiO4.

Taylor, Nicole K↗
DOE OSTI2021

Thermal Chemistry of Nickel Diketonate Atomic Layer Deposition (ALD) Precursors on Tantalum and Silicon Oxide Surfaces

The mechanism of the thermal conversion of both bis(2,2,6,6-tetramethyl-3,5-heptanedionato)nickel(II) (Ni(TMHD) 2 ) and the protonated ligand (TMHD-H) adsorbed on TaO x and SiO 2 /TaO x surfaces was characterized under ultrahigh vacuum (UHV) by a combination of temperature-programmed desorption (TPD) and X-ray photoelectron spectroscopy (XPS) experiments. In this work, A stepwise decomposition was observed with Ni(TMHD) 2 encompassing at least four different stages: (1) a ligand loss, to release TMHD-H; (2) a surprising ligand fractioning via the scission of an inner C–C bond within the central β-diketonate moiety to produce an aldehyde (pivaldehyde) and a ketone (pinacolone); (3) further ligand splitting following a more extensive cracking to yield an olefin (from dehydrogenation of the terminal tert-butyl group), carbon monoxide, and adsorbed methylene groups; and finally, (4) the loss of one oxygen atom from the remaining ligands to produce the corresponding enone. As these conversions take place, the Ni ion is reduced, first to a partially oxidized intermediate, as the first ligand is removed, and then to its metallic state as the remaining organic fragments migrate to the surface. A similar sequence was seen on both surfaces, but with the transitions taking place at higher temperatures on SiO 2 . The implications of these results to the surface chemistry of other ALD precursors and to the design of ALD processes are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Epitaxial Design of Complex Nickelates as Electrocatalysts for the Oxygen Evolution Reaction

Abstract The oxygen evolution reaction (OER) is a crucial process in electrochemical water splitting, a promising technology to renewably yield hydrogen gas from water. Designing and developing earth‐abundant, efficient, and stable OER electrocatalysts to replace the most widely used but scarce RuO 2 and IrO 2 are thus of critical interest. Recently, ABO 3 ‐structured perovskite oxides, especially rare‐earth nickelates, are extensively studied for their potential use as OER electrocatalysts. In particular, the epitaxial synthesis of complex oxide thin films allows flexible and precise control over the materials so that their structure–stability–property relationships can be established. Using nickelate thin films as model systems, this review illustrates how epitaxial design allows researchers to test different hypotheses and proposed descriptors, as well as formulate new design principles. Following a brief introduction to the background of OER mechanisms, proposed activity descriptors, and synthesis methods, various epitaxial design strategies are surveyed including strain tuning, composition control, surface termination/orientation selection, defect engineering, and interface design. These have led to precise control over the atomic structures and electronic properties of nickelates which in turn determine their electrochemical performance. Finally, the remaining challenges and perspectives toward a deeper understanding and use of complex oxides as OER catalysts are discussed.

Choi, Min‐Ju↗
DOE OSTI2024

Design of Advanced Thin-Film Catalysts for Electrooxidation of Formic Acid

Successful development of catalysts for electrochemical formic acid oxidation (FAO) requires finding an optimal balance between catalytic performance (activity, stability, and selectivity) and catalyst cost. While platinum is one of the most active catalyst materials for FAO, it suffers from performance loss at low overpotentials due to poisoning with CO, which is one of the intermediates formed in the so-called indirect path of FAO. In this work, we explored the synergistic effects of the supporting material and annealing temperature on the performance of Pt thin films for FAO in acidic media. Compared to the as-prepared Pt films, the annealed films show up to 5-fold and 15-fold improvement for FAO on Pt@Ni and Pt@Cr, respectively. In conclusion, while the most active Pt@Ni thin film shows the lowest stability, the most active Pt@Cr thin film is also the most stable, challenging conventional trade-offs in electrocatalysis and providing a promising candidate for FAO nanocatalyst synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Geometric frustration of Jahn–Teller order in the infinite-layer lattice

The Jahn–Teller effect, in which electronic configurations with energetically degenerate orbitals induce lattice distortions to lift this degeneracy, has a key role in many symmetry-lowering crystal deformations. Lattices of Jahn–Teller ions can induce a cooperative distortion, as exemplified by LaMnO 3 . Although many examples occur in octahedrally or tetrahedrally coordinated transition metal oxides due to their high orbital degeneracy, this effect has yet to be manifested for square-planar anion coordination, as found in infinite-layer copper, nickel, iron and manganese oxides. Here, for this work, we synthesize single-crystal CaCoO 2 thin films by topotactic reduction of the brownmillerite CaCoO 2.5 phase. We observe a markedly distorted infinite-layer structure, with ångström-scale displacements of the cations from their high-symmetry positions. This can be understood to originate from the Jahn–Teller degeneracy of the d xz and d yz orbitals in the d 7 electronic configuration along with substantial ligand–transition metal mixing. A complex pattern of distortions arises in a $2\sqrt2$ x $2\sqrt2$ x $1$ tetragonal supercell, reflecting the competition between an ordered Jahn–Teller effect on the CoO 2 sublattice and the geometric frustration of the associated displacements of the Ca sublattice, which are strongly coupled in the absence of apical oxygen. As a result of this competition, the CaCoO 2 structure forms an extended two-in–two-out type of Co distortion following ‘ice rules’.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Nucleation-promoting and growth-limiting synthesis of disordered rock-salt Li-ion cathode materials

Disordered rock-salt oxides and oxyfluorides are promising positive electrode materials for high-performance lithium-ion batteries free of nickel and cobalt. However, conventional synthesis methods rely on post-synthesis pulverization to achieve cycling-appropriate particle sizes, offering limited control over particle microstructure and crystallinity. This accelerates degradation and complicates secondary particle processing. Here we present a synthesis strategy that enhances nucleation while suppressing particle growth and agglomeration across various disordered rock-salt compositions, including lithium–manganese–titanium oxide, lithium–manganese–niobium oxide, and lithium–nickel–titanium oxide systems. Applied to Li 1.2 Mn 0.4 Ti 0.4 O 2 , this method yields highly crystalline, well-dispersed sub-200 nm particles that form homogeneous electrode films with stable cycling behavior. Tested in cells with lithium metal as the counter electrode, these electrodes deliver ~200 mAh/g with 85% capacity retention relative to the first cycle after 100 cycles (20 mA/g, 1.5–4.8 V), and an average discharge voltage loss of 4.8 mV per cycle, compared to 38.6% retention and 7.5 mV loss per cycle for electrodes derived from pulverized solid-state particles. This approach suggests a route to enhance the performance and durability of disordered rock-salt electrodes for sustainable lithium-ion batteries.

Batteries↗
DOE OSTI2022

A completely precious metal–free alkaline fuel cell with enhanced performance using a carbon-coated nickel anode

Significance We present a groundbreaking advance in completely nonprecious hydrogen fuel cell technologies achieving a record power density of 200 mW/cm 2 with Ni@CN x anode and Co−Mn cathode. The 2-nm CN x coating weakens the O-binding energy, which effectively mitigates the undesirable surface oxidation during hydrogen oxidation reaction (HOR) polarization, leading to a stable fuel cell operation for Ni@CN x over 100 h at 200 mA/cm 2 , superior to a Ni nanoparticle counterpart. Ni@CNx exhibited a dramatically enhanced tolerance to CO relative to Pt/C, enabling the use of hydrogen gas with trace amounts of CO, critical for practical applications. The complete removal of precious metals in fuel cells lowers the catalyst cost to virtually negligible levels and marks a milestone for practical alkaline fuel cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Facettierte verzweigte Nickel‐Nanopartikel mit variierbarer Verzweigungslänge für die hochaktive elektrokatalytische Oxidation von Biomasse

Abstract Die Kontrolle der Bildung von verzweigten Nanopartikeln mit hoher Homogenität ist eine der größten Herausforderungen bei der Herstellung von Nanokatalysatoren mit verbesserter Aktivität und Stabilität. Mithilfe eines Mechanismus unter Nutzung eines kubischen Kerns und hexagonaler Verzweigung zur Bildung hochgradig monodisperser verzweigter Nanopartikel wurde die Länge der Nickelverzweigungen variiert. Es hat sich gezeigt, dass die Verlängerung der Nickelzweige mit ihrer hohen Bedeckung der aktiven Facetten die Aktivität für die elektrokatalytische Oxidation von 5‐Hydroxymethylfurfural (HMF) als Beispiel für die Umwandlung von Biomasse verbessert.

Poerwoprajitno, Agus R.↗
DOE OSTI2025

Effect of high scandium doping in barium zirconate on nickel diffusion and performance of proton-conducting solid oxide electrolyzer cells

Proton-conducting solid oxide electrolyzer cells (p-SOECs) are emerging but promising technologies for hydrogen production. However, due to the lack of a robust electrolyte, p-SOECs struggle simultaneously to display high performance, Faradaic efficiency, and durability. Motivated by its high proton concentrations and stability as a barium zirconate, we have investigated BaZr 0.6 Sc 0.4 O 3-δ (BZSc40) as a potential next-generation p-SOEC electrolyte. Here, we found elevated levels of NiO diffusion through BZSc40 electrolytes during high-temperature sintering, attributed to the large oxygen vacancy concentrations present in BZSc40, as revealed by first-principle computational results. Controlling NiO diffusion is critical, as it can facilitate densification and grain size growth, but it may also detrimentally impact performance by causing electronic leakage. By optimizing sintering temperature when fabricating BZSc40 cells, we successfully controlled NiO diffusion, achieving sufficient electrolyte densification along with high performance and Faradaic efficiency. BZSc40 cells reached −0.99 A/cm 2 at 1.3 V and 600 °C and exhibited enhanced durability with a 3.37 mV/kh degradation rate at −0.8 A/cm 2 over a 200-h testing period. BZSc40 electrolytes demonstrated superior performance over BaZr 0.8 Y 0.2 O 3-δ (BZY20). In addition to elevated current densities and grain sizes, BZSc40 cells achieved Faradaic efficiencies of 76 % compared to 54 % for BZY20 at −0.2 A/cm 2 and 600 °C. This work lays the foundation for BZSc40 as a potential electrolyte due to its advantages over BZY20 while demonstrating the significance of controlling NiO diffusion when fabricating p-SOECs.

Electrolyzer↗
DOE OSTI2021

2D Ni 0.25 Mn 0.75 O 2 : A high-performance cathode for multivalent ion batteries

Although Li-ion batteries have driven portable energy storage in recent decades, there is increasing concern about their safety, cost, and abundance of constituents. Multivalent ion batteries (MVIBs) have the potential to remedy these issues, but they are limited by the currently known MVIB cathodes, which fail to deliver unanimously favorable voltage, energy density, and diffusion kinetics. Here we used density functional theory (DFT) to model the performance of Li, Na, Mg, Ca, and Al ions when paired with 2D Ni 0.25 Mn 0.75 O 2 , a novel cathode that uses increased layer separation to improve on the kinetics of its 3D analog. Our calculations yielded maximum voltages of 3.38 V for Na and 2.7 V for Ca, outperforming 2D Na x MnO 2 and Na x NiO 2 . Diffusion barriers for Li, Na, and Ca are below 300 meV, comparable to existing battery technology and the endpoint 2D cathodes; meanwhile, Mg and Al have prohibitively high diffusion barriers, implying their incompatibility with this cathode. Lastly, density of states calculations and Bader charge analysis show that the cathode becomes conducting following ion adsorption, which is necessary for high-rate performance. 2D Ni 0.25 Mn 0.75 O 2 maintains performance seen with other 2D transition metal oxides while increasing cathode conductivity, indicating that it is a promising candidate for experimental investigation with Li, Na, and Ca ions.

25 ENERGY STORAGE↗