Search NASA⌕ Search

SEARCH · Search NASA

Results for “Prognostic System”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Data Mining for Anomaly Detection

The Vehicle Integrated Prognostics Reasoner (VIPR) program describes methods for enhanced diagnostics as well as a prognostic extension to current state of art Aircraft Diagnostic and Maintenance System (ADMS). VIPR introduced a new anomaly detection function for discovering previously undetected and undocumented situations, where there are clear deviations from nominal behavior. Once a baseline (nominal model of operations) is established, the detection and analysis is split between on-aircraft outlier generation and off-aircraft expert analysis to characterize and classify events that may not have been anticipated by individual system providers. Offline expert analysis is supported by data curation and data mining algorithms that can be applied in the contexts of supervised learning methods and unsupervised learning. In this report, we discuss efficient methods to implement the Kolmogorov complexity measure using compression algorithms, and run a systematic empirical analysis to determine the best compression measure. Our experiments established that the combination of the DZIP compression algorithm and CiDM distance measure provides the best results for capturing relevant properties of time series data encountered in aircraft operations. This combination was used as the basis for developing an unsupervised learning algorithm to define "nominal" flight segments using historical flight segments.

Biswas, Gautam↗

A Predictive GNSS Performance Monitor for Autonomous Air Vehicles in Urban Environments

The emergence and development of advanced technologies and vehicle types has created a growing demand for the introduction of new forms of flight operations. These new and increasingly complex operational paradigms such as Advanced and Urban Air Mobility (AAM/UAM) present regulatory authorities and the aviation community with several design and implementation challenges – particularly for highly autonomous vehicles. An overarching and daunting task is finding methods to integrate these emerging operations without compromising safety or disrupting traditional airspace operations. A shift toward a more predictive risk mitigation capability becomes critical to meet this challenge. This paper focus on the development and testing of a prognostic service aimed at estimating the quality of Global Navigation Satellite System (GNSS) performance for an autonomous aircraft in complex environments. The intent of this function is to proactively reduce a flight operations risk of exposure to states that may induce poor or unacceptable navigation system performance by factoring in estimates of GNSS quality into pre-flight and/or in-flight route planning. Methodologies for producing quality estimates are specified and results are provided for selected simulation and flight test cases.

GNSS↗

Incorporating Microtopography in a Land Surface Model and Quantifying the Effect on the Carbon Cycle

Abstract Northern peatlands are a terrestrial carbon store, with an annual sink of 0.1 Pg C yr −1 and a total storage estimate of 547 Pg C. Northern peatlands are also major contributors of atmospheric methane. Most land surface models do not accurately represent peatland carbon emissions, partly because they do not represent the hydrologic cycle and/or microtopography adequately. Interactions between water table depth and microtopography in peatlands influence decomposition and modulate CO 2 and CH 4 fluxes. A modified version of the land surface component of the Energy Exascale Earth System Model, was recently created to represent the microtopography and hydrology of a raised dome bog in northern Minnesota, USA. In this study, three microtopographic parameters are analyzed in the modified version: hummock height, hummock‐hollow spacing, and percent hollow. Terrestrial laser scanning observations are used to set uncertainty bounds for these parameters. Our model experiment results suggest that carbon‐related quantities of interest (QOI) were typically the most sensitive to hummock height, and those QOI (especially net ecosystem exchange, NEE) were sensitive to interactions between parameters. Furthermore, NEE was most relatively influenced by microtopographic parameters in the model, varying by 35%. We found that increasing hummock height resulted in more C being stored in plant tissue and less in soil organic matter. This coincided with decreases in Sphagnum and increases in Picea and shrub net primary production. These results suggest that future studies may consider extending prognostic capabilities of carbon cycling by incorporating hummock hollow microtopography into earth system models.

58 GEOSCIENCES↗

Transformer Health Monitoring Using Dissolved Gas Analysis

As integral components of any power plant, transformers supply the generated electricity to the grid. However, a transformer’s cellulose-based paper insulation and the mineral oil in which it is immersed break down over time under standard operating conditions—or more rapidly due to potential faults within the system. As the transformer’s mineral oil breaks down, gases are released that can be measured and monitored. This technical brief exhibits a collection of diagnostic and prognostic techniques that utilities can adopt in lieu of labor-intensive periodic preventive maintenance routines. Furthermore, prognostic models have been incorporated using the latest version of the Institute of Electrical and Electronics Engineers (IEEE) standard (IEEE, 2019) for dissolved gas analysis (DGA), thus expanding it to include estimation of the time to maintenance. Overall, four different methodologies are explained, each of which aids in determining a transformer’s state of health. These methodologies include the Chendong model, the IEEE thermal life consumption model (IEEE, 2012), a diagnostic model for DGA, and a prognostic model for DGA that uses an autoregressive integrated moving average (ARIMA) model. An additional improvement for estimating missing system parameters by using monitoring data (i.e., a tool for parameter estimation utilizing Powell’s method) is presented, enabling the IEEE thermal life consumption model to benefit not only the collaborating power plant, but also the power industry at large.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Pan‐Cancer Survival Impact of Immune Checkpoint Inhibitors in a National Healthcare System

ABSTRACT Background The cumulative, health system‐wide survival benefit of immune checkpoint inhibitors (ICIs) is unclear, particularly among real‐world patients with limited life expectancies and among subgroups poorly represented on clinical trials. We sought to determine the health system‐wide survival impact of ICIs. Methods We identified all patients receiving PD‐1/PD‐L1 or CTLA‐4 inhibitors from 2010 to 2023 in the national Veterans Health Administration (VHA) system (ICI cohort) and all patients who received non‐ICI systemic therapy in the years before ICI approval (historical control). ICI and historical control cohorts were matched on multiple cancer‐related prognostic factors, comorbidities, and demographics. The effect of ICI on overall survival was quantified with Cox regression incorporating matching weights. Cumulative life‐years gained system‐wide were calculated from the difference in adjusted 5‐year restricted mean survival times. Results There were 27,322 patients in the ICI cohort and 69,801 patients in the historical control cohort. Among ICI patients, the most common cancer types were NSCLC (46%) and melanoma (10%). ICI demonstrated a large OS benefit in most cancer types with heterogeneity across cancer types (NSCLC: adjusted HR [aHR] 0.56, 95% confidence interval [CI] 0.54–0.58,p < 0.001; urothelial: aHR 0.91, 95% CI 0.83–1.01,p = 0.066). The relative benefit of ICI was stable across patient age, comorbidity, and self‐reported race subgroups. Across VHA, 15,859 life‐years gained were attributable to ICI within 5‐years of treatment, with NSCLC contributing the most life‐years gained. Conclusion We demonstrated substantial increase in survival due to ICIs across a national health system, including in patient subgroups poorly represented on clinical trials.

Oncology↗

Prognostic Emissions in GEOS

Prognostic emissions enable seamless applications of atmospheric chemistry and aerosol models across scales. Prognostic emissions also facilitate direct and higher order interactions and feedbacks between components in an integrated modeling system and thus enhance the model representativeness. On the other hand they also require more attention and strict validation to ensure model integrity. In this talk I will discuss recent developments related to prognostic emissions of mineral dust, primary marine aerosols and biomass burning in the NASA GEOS model and outline some of the challenges stemming from limited ability to represent subscale and stochastic processes.

Darmenov, Anton↗

In-Situ Scanning Electron Microscope Experiments for Microscale Mechanical Testing and Validated Modeling of Fiber Reinforced Thermoplastics

A novel, in-situ, scanning electron microscope (SEM) mechanical testing capability for materials at the microscale which provides experimental validation to a machine learning (ML) toolset for full-field validation of physics-based micromechanics models is being developed by researchers at NASA Glenn Research Center. These are enabling technologies for the integration of multiscale digital twins for materials into system level models which will result in the improved performance, material discovery, reduced production cost and time, rapid characterization, and prognostic structural health monitoring (SHM) for materials and structures for extreme environments in support of NASA space exploration missions. In order to bridge the material structure-to-system gap for digital twins, physics-based models must be experimentally validated at multiple length scales. Seminal microscale experiments, conducted at the Air Force Research Laboratory (AFRL), were limited to transverse compression of single-layer, unidirectional thermoset polymer matrix composite (PMC) micropillar specimens [1]. The early phases of the current project followed those initial results and setup to reproduce the compression testing of PMC material on the custom-built piezoelectric actuated micromechanical testing rig built by MicroTesting Solutions LLC. In this work, samples of thermoplastic PMC material were first machined into 3 mm cubes, and then further machining and final milling was done using a Focused Ion Beam (FIB). The initial experiment was done on a pillar roughly 20 µm x 20 µm x 40 µm tall. Additional pillars were milled with final sizes ranging from 20 µm x 20 µm x 40 µm tall to 40 µm x 40 µm x 65 µm tall. A speckle pattern for in-situ full-field measurements using Digital Image Correlation (DIC) was applied with platinum, which was coated on the surface, and then the FIB was used to mill away some of the coating to produce an irregular pattern of Pt on the pillar surface. The samples were loaded into the custom testing rig and placed into the SEM and loaded under compression until failure. Images were collected in the SEM during testing. Post-processing of the images was conducted using DIC to obtain full-field displacement and strain measurements elucidating the role of the matrix as well as fiber-fiber interaction at the microscale within the composite subjected to compression loading well into the non-linear regime of the material. Moreover, the evolution of fiber-matrix debonding and matrix cracking is observed in-situ at the microscale. This data, along with images segmented with a newly developed ML toolset [2], was used to create and validate physics-based micromechanics models. An image of the failed micropillar is shown in Figure 1. The techniques developed in the initial compression experiment was tailored to the validation needs of the models and expanded to include different sized samples as well as possibly tension and fatigue.

Laura Wilson↗

Runtime Monitoring with R2U2 for Aircraft Systems with Neural Networks

R2U2 (Realizable, Responsive, Unobtrusive Unit) is a hardware-supported tool and framework for real-time system monitoring and software health management of cyber-physical systems. During system operation, R2U2 continuously monitors properties about safety, performance, and security of the vehicle and its vital components and can perform diagnostic reasoning. Efficient observers for past-time and future-time Metric Temporal Logic, fast reasoners for Bayesian Networks, and model-based prognostics algorithms are key components of R2U2 and designed for minimal computational footprint. R2U2 has been implemented in software supporting ROS, NASA's cFS/cFE, and Simulink and as an FPGA configuration. The synergistic combination of monitors and observers in R2U2 makes it possible to design powerful models for system runtime monitoring, diagnostics, software health management, prognostics, and security monitoring. In this presentation, I will give a detailed overview of the R2U2 architecture and its features and will discuss the application of R2U2 for safety-monitoring of a neural-network based autonomous centerline tracking system (ACT) for autonomous aircraft.

Runtime Monitoring↗

Applicability of Loads Estimation Techniques Using Sparse Acceleration Sensor Data to Spacecraft Structural Health Monitoring

The use of structural health monitoring systems on spacecraft structures can play a crucial role in ensuring the safety, reliability, and longevity of the structure by gathering and analyzing onboard sensor data. Of specific importance is monitoring for excessive loading at critical interfaces as any off-nominal structural excitations experienced by spacecraft structures can cause early unpredicted high structural life consumption or damage. The availability and cost of flight-certified sensors along with the size of spacecraft structures and allowable payload mass drives the need for a method to estimate loads using sparsely-located sensors. Numerous approaches such as physics-based, statistical learning, and physics-enhanced statistical learning algorithms have gained popularity among structural prognostics applications. However, developing noise-robust prediction models to assess loads and structural life predictions from a sparse multi-sensor data acquisition system can be a challenging task. This paper discusses the evaluation of physics-based versus machine-learning algorithms for predicting loads and structural life at mission critical locations on the spacecraft structure using a finite element loads analysis with the application of simulated noise and noise reduction techniques. To estimate the loads from accelerations, the physics-based algorithm leverages a loads transformation matrix from a Craig-Bampton reduced finite element model. A System Equivalent Reduction Expansion Process (SEREP) and a pseudo-inverse approach are considered to expand from the onboard sensor degrees of freedom to the Craig-Bampton model degrees of freedom. The machine learning algorithm provides a data driven solution/mapping of the sensor accelerations to the loads at the mission critical locations using a high dimensionality analysis. Although these strategies produce comparable loads prediction without noise, the limitations of these strategies with incorporating simulated noise and noise reduction techniques with low signal to noise ratio signals are evaluated. The study demonstrates the immense potential of statistical learning algorithms for sparse structural prognostic models and enhancing signal denoising techniques. These findings also highlight the need for noise-resilient prognostic models and low-noise data acquisition systems onboard spacecraft structures.

Spacecraft Structural Health Monitoring↗

Neutrophil to Lymphocyte Ratio: A Prognostic Indicator for Astronaut Health

Short-term and long-term spaceflight missions can cause immune system dysfunction in astronauts. Recent studies indicate elevated white blood cells (WBC) and polymorphonuclear neutrophils (PMN) in astronaut blood, along with unchanged or reduced lymphocyte counts, and reduced T cell function, during short-(days) and long-(months) term spaceflight. A high PMN to lymphocyte ratio (NLR) can acts as a strong predictor of poor prognosis in cancer, and as a biomarker for subclinical inflammation in humans and chronic stress in mouse models, however, the NLR has not yet been identified as a predictor of astronaut health during spaceflight. For this, complete blood cell count data collected from astronauts and rodents that have flown for short- and long-term missions on board the International Space Station (ISS) was repurposed to determine the NLR pre-, in-, and post-flight. The results displayed that the NLR progressively increased during spaceflight in both human and mice, while a spike in the NLR was observed at post-flight landing, suggesting stress-induced factors may be involved. In addition, the ground-based chronic microgravity analog, hindlimb unloading in mice, indicated an increased NLR, along with induced myeloperoxidase expression, as measured by quantitative (q)PCR. The mechanism for increased NLR was further assessed in vitro using the NASA-developed rotating wall vessel (RWV) cell culture suspension system with human WBCs. The results indicated that simulated microgravity led to increased mature PMN counts, NLR profiles, and production of reactive oxygen species (ROS). Collectively, these studies show that an increased NLR is observed in spaceflight missions, and in chronic microgravity-analog simulation in mice, and that this effect may be potentiated by the oxidative stress response in blood cells under microgravity conditions. Furthermore, these results suggest that a disrupted NLR profile in spaceflight may further disrupt immune homeostasis, potentially causing chronic immune-mediated inflammatory diseases. Thus, we propose that the health status of astronauts during short- and long-term space missions can be monitored by their NLR profile, in addition to utilizing this measurement as a tool for interventions and countermeasure development to restore homeostatic immunity.

biomarker↗

Advanced diagnostics to evaluate heterogeneity in lithium-ion battery modules

Battery packs for electric and stationary applications experience varied operating conditions, including abuse—e.g., fast charging, overcharging, thermal, vibration, shock, etc.—throughout their lifetimes. Innovative diagnostic tools and algorithms that go beyond single cells and deal with modules and packs are essential for early detection of off-normal issues. High-resolution tools with known detection limits are key to developing appropriate mitigation strategies. With the advent of rapid impedance spectroscopy that can generate a broadband impedance spectrum in ~10 sec, the case for impedance-based diagnostics that can be readily aligned with other methods, such as incremental capacity or dQ.dV -1 , has become promising. This study used the aforementioned diagnostic methods to identify realistic in-vehicle battery abnormalities (e.g., localized self-discharge and non-uniform aging), in series (up to 10S) and parallel (4P) strings, using 16 Ah graphite/NMC cells. The impedance-based diagnostic is found to be sensitive to the string size and state. Depending on the type of abnormality, detection frequency varied. The dQ.dV -1 method showed the potential to detect long-term aging-related heterogeneity in modules. In general, both the impedance and dQ.dV -1 methods were able to detect series strings’ abnormalities, but struggled to find those issues within parallel modules.

25 ENERGY STORAGE↗

Identification of a High-Risk Group Among Patients With Oral Cavity Squamous Cell Carcinoma and pT1-2N0 Disease

Purpose: In the American Joint Committee on Cancer 2010 classification system, pT1-2N0 oral cavity squamous cell carcinoma (OSCC) is considered an early-stage cancer treatable with surgery alone (National Comprehensive Cancer Network 2010 guidelines). Our aim was to evaluate the feasibility of surgery alone for pT1-2N0 OSCC patients. Methods and Materials: Among 1279 previously untreated OSCC patients referred to our hospital between January 1996 and May 2008, we identified 457 consecutive patients with pT1-2N0 disease. All had radical tumor excision with neck dissection. A total of 387 patients showing pathologic margins greater than 4 mm and treated by surgery alone were included in the final analysis. All were followed up for at least 24 months after surgery or until death. The 5-year rates of control, distant metastasis, and survival were the main outcome measures. Results: The 5-year rates in the entire group of pT1-2N0 patients were as follows: local control, 91%; neck control, 92%; distant metastases, 1%; disease-free survival, 85%; disease-specific survival, 93%; and overall survival, 84%. Multivariate analysis identified poor differentiation and pathologic tumor depth of 4 mm or greater as independent risk factors for neck control, disease-free survival, and disease-specific survival. A scoring system using poor differentiation and tumor depth was formulated to define distinct prognostic groups. The presence of both poorly differentiated tumors and a tumor depth of 4 mm or greater resulted in significantly poorer 5-year neck control (p < 0.0001), disease-free (p < 0.0001), disease-specific (p < 0.0001), and overall survival (p = 0.0046) rates. Conclusion: The combination of poor differentiation and pathologic tumor depth of 4 mm or greater identified a subset of pT1-2N0 OSCC patients with poor outcome, who may have clinical benefit from postoperative adjuvant radiotherapy.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Advanced Small Modular Reactor Economics Status Report

This report describes the data collection work performed for an advanced small modular reactor (AdvSMR) economics analysis activity at the Oak Ridge National Laboratory. The methodology development and analytical results are described in separate, stand-alone documents as listed in the references. The economics analysis effort for the AdvSMR program combines the technical and fuel cycle aspects of advanced (non-light water reactor [LWR]) reactors with the market and production aspects of SMRs. This requires the collection, analysis, and synthesis of multiple unrelated and potentially high-uncertainty data sets from a wide range of data sources. Further, the nature of both economic and nuclear technology analysis requires at least a minor attempt at prediction and prognostication, and the far-term horizon for deployment of advanced nuclear systems introduces more uncertainty. Energy market uncertainty, especially the electricity market, is the result of the integration of commodity prices, demand fluctuation, and generation competition, as easily seen in deregulated markets. Depending on current or projected values for any of these factors, the economic attractiveness of any power plant construction project can change yearly or quarterly. For long-lead construction projects such as nuclear power plants, this uncertainty generates an implied and inherent risk for potential nuclear power plant owners and operators. The uncertainty in nuclear reactor and fuel cycle costs is in some respects better understood and quantified than the energy market uncertainty. The LWR-based fuel cycle has a long commercial history to use as its basis for cost estimation, and the current activities in LWR construction provide a reliable baseline for estimates for similar efforts. However, for advanced systems, the estimates and their associated uncertainties are based on forward-looking assumptions for performance after the system has been built and has achieved commercial operation. Advanced fuel materials and fabrication costs have large uncertainties based on complexities of operation, such as contact-handled fuel fabrication versus remote handling, or commodity availability. Thus, this analytical work makes a good faith effort to quantify uncertainties and provide qualifiers, caveats, and explanations for the sources of these uncertainties. The overall result is that this work assembles the necessary information and establishes the foundation for future analyses using more precise data as nuclear technology advances.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Efficient Probabilistic Diagnostics for Electrical Power Systems

We consider in this work the probabilistic approach to model-based diagnosis when applied to electrical power systems (EPSs). Our probabilistic approach is formally well-founded, as it based on Bayesian networks and arithmetic circuits. We investigate the diagnostic task known as fault isolation, and pay special attention to meeting two of the main challenges . model development and real-time reasoning . often associated with real-world application of model-based diagnosis technologies. To address the challenge of model development, we develop a systematic approach to representing electrical power systems as Bayesian networks, supported by an easy-to-use speci.cation language. To address the real-time reasoning challenge, we compile Bayesian networks into arithmetic circuits. Arithmetic circuit evaluation supports real-time diagnosis by being predictable and fast. In essence, we introduce a high-level EPS speci.cation language from which Bayesian networks that can diagnose multiple simultaneous failures are auto-generated, and we illustrate the feasibility of using arithmetic circuits, compiled from Bayesian networks, for real-time diagnosis on real-world EPSs of interest to NASA. The experimental system is a real-world EPS, namely the Advanced Diagnostic and Prognostic Testbed (ADAPT) located at the NASA Ames Research Center. In experiments with the ADAPT Bayesian network, which currently contains 503 discrete nodes and 579 edges, we .nd high diagnostic accuracy in scenarios where one to three faults, both in components and sensors, were inserted. The time taken to compute the most probable explanation using arithmetic circuits has a small mean of 0.2625 milliseconds and standard deviation of 0.2028 milliseconds. In experiments with data from ADAPT we also show that arithmetic circuit evaluation substantially outperforms joint tree propagation and variable elimination, two alternative algorithms for diagnosis using Bayesian network inference.

Mengshoel, Ole J.↗

Physics Based Electrolytic Capacitor Degradation Models for Prognostic Studies under Thermal Overstress

Electrolytic capacitors are used in several applications ranging from power supplies on safety critical avionics equipment to power drivers for electro-mechanical actuators. This makes them good candidates for prognostics and health management research. Prognostics provides a way to assess remaining useful life of components or systems based on their current state of health and their anticipated future use and operational conditions. Past experiences show that capacitors tend to degrade and fail faster under high electrical and thermal stress conditions that they are often subjected to during operations. In this work, we study the effects of accelerated aging due to thermal stress on different sets of capacitors under different conditions. Our focus is on deriving first principles degradation models for thermal stress conditions. Data collected from simultaneous experiments are used to validate the desired models. Our overall goal is to derive accurate models of capacitor degradation, and use them to predict performance changes in DC-DC converters.

Kulkarni, Chetan S.↗

Self-Powered Wireless Sensors

NASA's integrated vehicle health management (IVHM) program offers the potential to improve aeronautical safety, reduce cost and improve performance by utilizing networks of wireless sensors. Development of sensor systems for engine hot sections will provide real-time data for prognostics and health management of turbo-engines. Sustainable power to embedded wireless sensors is a key challenge for prolong operation. Harvesting energy from the environment has emerged as a viable technique for power generation. Thermoelectric generators provide a direct conversion of heat energy to electrical energy. Micro-power sources derived from thermoelectric films are desired for applications in harsh thermal environments. Silicon based alloys are being explored for applications in high temperature environments containing oxygen. Chromium based p-type Si/Ge alloys exhibit Seebeck coefficients on the order of 160 micro V/K and low thermal conductance of 2.5 to 5 W/mK. Thermoelectric properties of bulk and thin film silicides will be discussed

Dynys, Fred↗

A brief description of the simple biosphere model (SiB)

A biosphere model for calculating the transfer of energy, mass, and momentum between the atmosphere and the vegetated surface of the Earth was designed for atmospheric general circulation models. An upper vegetation layer represents the perennial canopy of trees or shrubs, a lower layer represents the annual ground cover of grasses and other herbacious species. The local coverage of each vegetation layer may be fractional or complete but as the individual vegetation elements are considered to be evenly spaced, their root systems are assumed to extend uniformly throughout the entire grid-area. The biosphere has seven prognostic physical-state variables: two temperatures (one for the canopy and one for the ground cover and soil surface); two interception water stores (one for the canopy and one for the ground cover); and three soil moisture stores (two of which can be reached by the vegetation root systems and one underlying recharge layer into and out of which moisture is transferred only by hydraulic diffusion).

Sellers, P. J.↗

V and V of ISHM Software for Space Exploration

NASA has established a far-reaching and long-term program for robotic and manned exploration of the solar system, beginning with missions to the moon and Mars. The Crew Transportation System (CTS), a key system for space exploration, imposes four requirements' that ISHM addresses. These requirements have a wide range of implications for V&V and certification of ISHM. There is a range of time-criticality for ISHM actions, from prognostication, which is often (but not always) non-time-critical, to time-critical state estimation and system management under off-nominal emergency conditions. These are externally imposed requirements on ISHM that are subject to V&V. - In addition, a range of techniques are needed to implement an ISHM. The approaches to ISHM are described elsewhere. These approaches range from well-understood algorithms for low-level data analysis, validation and reporting, to AI techniques for state estimation and planning. The range of techniques, and specifically the use of AI techniques such as reasoning under uncertainty and mission planning (and re-planning), implies that several V&V approaches may be required. Depending on the ISHM architecture, traditional testing approaches may be adequate for some ISHM functionality. The AI-based approaches to reasoning under uncertainty, model-based reasoning, and planning share characteristics typical of other complex software systems, but they also have characteristics that set them apart and challenge standard V&V techniques. The range of possible solutions to the overall ISHM problem impose internal challenges to V&V. The V&V challenges increase when hard real-time constraints are imposed for time-critical functionality. For example, there is an external requirement that impending catastrophic failure of the Launch Vehicle (LV) at launch time be detected and life-saving action be taken within two seconds. In this paper we outline the challenges for ISHM V&V, existing approaches and analogs in other software application areas, and possible new approaches to the V&V challenges for space exploration ISHM.

Markosian, Lawrence↗