SEARCH · Search NASA

Results for “based”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

All sources NASA NTRS DOE OSTI

DOE OSTI2026

Supercharging simulation-based inference for Bayesian optimal experimental design

Abstract Bayesian optimal experimental design (BOED) seeks to maximize the expected information gain (EIG) of experiments. This requires a likelihood estimate, which in many settings is intractable. Simulation-based inference (SBI) provides powerful tools for this regime. However, existing work explicitly connecting SBI and BOED is restricted to a single contrastive EIG bound. We show that the EIG admits multiple formulations which can directly leverage modern SBI density estimators, encompassing neural posterior, likelihood, and ratio estimation. Building on this perspective, we define a novel EIG estimator using neural likelihood estimation. Further, we identify optimization as a key bottleneck of gradient based EIG maximization and show that a simple multi-start parallel gradient ascent procedure can substantially improve reliability and performance. With these innovations, our SBI-based BOED methods are able to match or outperform by up to 22% existing state-of-the-art approaches across standard BOED benchmarks.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2024

A Review on Protection Challenges on Transmission Lines Connected to Inverter Based Resources

The increased penetration of inverter-based resources (IBRs) connected to transmission grids is challenging how traditional electric power systems operate. Such systems were originally designed based on the dominant presence of synchronous generators. Some main challenges include the increased concerns about system stability due to the reduced system inertia caused by IBRs and the reduced protection reliability caused by the non-deterministic fault current response of IBRs. The protection relays’ algorithms have been designed and validated based on well-known fault current characteristics of synchronous generations, while the short-circuit responses of IBRs heavily depend on their vendor-specific control schemes, which are mainly set to protect inverter semiconductor switches and DC components. The magnitude of short current that IBRs contribute is typically between 1.1–1.5 times the rated current that may behave unstably and incoherently with the voltages. The control scheme of the IBRs also controls the active (P) and reactive (Q) support during system voltage sag and swell conditions. These characteristics challenge not only protective relay schemes but also existing short-circuit software tools to correctly model IBRs for fault studies and protection coordination analyses. Utilities, university researchers, research institutes, and relay manufacturers have performed studies to investigate different aspects of high IBR penetration. Almost all studies support 1) creating international and national standards to regulate the IBRs, 2) revising engineering tools to address shortcomings, and 3) adjusting the protective relay settings to resolve protection problems. This paper summarizes the studies and research conducted in recent years to quantify the impact of IBR penetration on transmission line protection and to identify potential solutions to improve the dependability and reliability of grid protection systems.

14 SOLAR ENERGY↗

DOE OSTI2025

Efficient Signal Processing in BOTDA: Utilizing PCA and PCA-Based Neural Networks for Temperature Monitoring

This work presents a comparative analysis of the various signal processing techniques used in the Brillouin gain spectrum (BGS) peak estimation. Traditional fitting methods such as Lorentzian curve fitting (LCF) are slow and less effective in noisy data. PCA-based methods were tested on the experimental data: A Euclidian distance-based approach, and a probabilistic deep neural network (PDNN) based approach, both using 5 principal components to represent a single BGS. Both methods significantly reduce computational time with respect to LCF, whereas PDNN offers uncertainty insights along with the parameter value. Measuring a range of temperatures, analyzing accuracy, and speed, it can be concluded that PCA trained PDNN outperforms other methods, and appears to be helpful in scenario where large datasets are generated.

Brillouin optical time domain analysis↗

DOE OSTI2024

A review on protection challenges of Transmission Lines connected to Inverter Based Resources

14 SOLAR ENERGY↗

DOE OSTI2025

Aqueous-Based Granulation Method Towards Syngas Production

An aqueous-based granulation method is developed to combat the structural changes associated with binder-based granulation techniques. Microwave-assisted methane reforming studies showed an improved catalyst efficiency for these aqueous-based granules compared to the powder catalysts. This granulation method has been extended to other practical applications (chemical looping gasification and air separations).

aqueous-based granulation↗

DOE OSTI2025

An automated integrated web-based smart tool for open stope design

The Stability Graph is a widely used tool for the design of open stopes in underground mining. Many users of the Stability Graph still apply this design method manually. Although the manual approach has benefits, using multiple graphs and stability number computation charts for each stope surface is time-consuming, even for the experienced mining engineer. Current practice in the use of the method also limits data sharing. This paper presents a StopeSoft web-based tool for open stope stability prediction that is developed on the basis of the Stability Graph method and is available at openstope.com. StopeSoft incorporates flexibility in terms of Stability Graph options and incorporates additional critical factors often overlooked. As a web-based tool, StopeSoft encourages and makes data sharing possible globally, focused on expanding the database and improving the current limitations of the Stability Graph to provide practical, reliable solutions for mining engineers, consultants, and academics. The StopeSoft automated process facilitates the process of open stope stability prediction, saving time and minimizing potential human errors. Statistical treatment of the data accounts for the variability of input parameters to emphasize the probabilistic nature of the Stability Graph method. The probabilistic interpretation of the stability states of stope surfaces eliminates the false feeling of absolute stope performance based on its location on the Stability Graph , as implied by the deterministic approach.

58 GEOSCIENCES↗

DOE OSTI2024

A Review on Protection Challenges of Transmission Lines Connected to Inverter-Based Resources

14 SOLAR ENERGY↗

DOE OSTI2023

Hybrid Data‐Driven Discovery of High‐Performance Silver Selenide‐Based Thermoelectric Composites

Optimizing material compositions often enhances thermoelectric performances. However, the large selection of possible base elements and dopants results in a vast composition design space that is too large to systematically search using solely domain knowledge. To address this challenge, a hybrid data-driven strategy that integrates Bayesian optimization (BO) and Gaussian process regression (GPR) is proposed to optimize the composition of five elements (Ag, Se, S, Cu, and Te) in AgSe-based thermoelectric materials. Data is collected from the literature to provide prior knowledge for the initial GPR model, which is updated by actively collected experimental data during the iteration between BO and experiments. Within seven iterations, the optimized AgSe-based materials prepared using a simple high-throughput ink mixing and blade coating method deliver a high power factor of 2100 µW m −1 K −2 , which is a 75% improvement from the baseline composite (nominal composition of Ag 2 Se 1 ). In conclusion, the success of this study provides opportunities to generalize the demonstrated active machine learning technique to accelerate the development and optimization of a wide range of material systems with reduced experimental trials.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Rational Design of Methylated Triazine‐Based Linear Conjugated Polymers for Efficient CO 2 Photoreduction with Water

The development of semiconducting conjugated polymers for photoredox catalysis holds great promise for sustainable utilization of solar energy. In this work, a new family of porous methylated triazine‐based linear conjugated polymers is reported that enable efficient photoreduction of carbon dioxide (CO 2 ) with water (H 2 O) vapor, in the absence of any additional photosensitizer, sacrificial agents or cocatalysts. It is demonstrated that the key lies in the generation of methylated triazine linkages through a facile condensation reaction between benzamidine and acetic anhydride, which impedes the formation of conventional triazine‐based frameworks. It is also shown that regulating conjugated linear backbones with different lengths of electron‐donated benzyl units provides a facile means to modulate their optical properties and the exciton dissociation, thereby affording more long‐lived photogenerated charge carriers and boosting charge separation and transfer. A high‐performance carbon monoxide (CO) production rate of 218.9 µmol g −1 h −1 is achieved with ≈ 100% CO selectivity, which is accompanied by exceptional H 2 O oxidation to oxygen (O 2 ). It anticipates this new study will advance synthetic approaches toward polymeric semiconductors and facilitate new possibilities for triazine‐based conjugated polymers with promising potential in artificial photocatalysis.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Manganese‐Based Spinel Cathodes: A Promising Frontier for Solid‐State Lithium‐Ion Batteries

Recently, all-solid-state lithium-ion batteries (ASSLIBs), which exhibit improved safety and enhanced energy density compared to conventional commercialized lithium-ion batteries (LIBs), thereby have garnered extensive research interest. Among the promising cathode candidates, Mn-based spinel cathodes LiMn 2 O 4 (LMO) and LiNi 0.5 Mn 1.5 O 4 (LNMO), with the unique characteristics of low cost, structural stability, and 3D Li-ion diffusion channels, have demonstrated excellent performance in LIBs and presented great potential in ASSLIBs applications. However, several challenges, including structural degradations, poor interfacial contact, large interfacial resistance, and Mn-dissolution/diffusion during the electrochemical cycling, hinder their practical applications and commercialization in the ASSLIBs. Particularly, the high-voltage LNMO cathodes suffer from the challenge of electrochemical incompatibility with most of the solid-state electrolytes (SSEs). Herein, the spinel structure, the electrochemical behavior, and the structural degradation of the LMO/LNMO are explored. The characteristics and recent progress of the mitigating strategies to the challenges of various SSEs, including polymer-, oxide-, composite-, sulfide-, halide-, and LiPON-based SSEs, are introduced when paired with LMO/LNMO. Finally, the directions for future research to advance Mn-based spinel cathodes and fulfill the requirements of the next-generation ASSLIBs are also discussed.

Dou, Yu [Concordia University, Montreal, QC (Canad↗

DOE OSTI2024

Two–Photon Printing of Base–Catalyzed Resins Involving Thiol–Michael Network Formation

Two-photon printing is accomplished using a photobase generator, 2-(2-nitrophenyl)-propyloxycarbony tetramethyl guanidine, to locally catalyze thiol-ene coupling between multifunctional monomers while mitigating chain-growth polymerization with free radical scavengers. Microstructures printed from base-catalyzed resins exhibit higher resolution (linewidths < 400 nm) and lower print error (<3%) than analogous microstructures printed using a photosensitive, free radical initiator. Further, Raman spectroscopy reveals that resins polymerized using the photobase generator in the presence of free radical scavengers exhibit higher selectivity of thiol-ene coupling over radical polymerization, resulting in stiffer, more uniform polymer networks. The base-catalyzed resins are capable of producing 3D microstructures printed with high accuracy and minimal post-processing defects. As a result, a direct comparison between free radical and base-initiated resins highlights the need for mindful consideration of how chemical reaction pathway influences printability and network end-properties when designing resins.

36 MATERIALS SCIENCE↗

DOE OSTI2024

3D Ferroelectric Phase Field Simulations of Polycrystalline Multi‐Phase Hafnia and Zirconia Based Ultra‐Thin Films

Abstract HfO 2 – and ZrO 2 –based ferroelectric thin films have emerged as promising candidates for the gate oxides of next‐generation electronic devices. Recent work has experimentally demonstrated that a tetragonal/orthorhombic (t/o‐) phase mixture with partially in‐plane polarization can lead to negative capacitance (NC) stabilization. However, there is a discrepancy between experiments and the theoretical understanding of domain formation and domain wall motion in these multi‐phase, polycrystalline materials. Furthermore, the effect of anisotropic domain wall coupling on NC has not been studied so far. Here, 3D phase field simulations of HfO 2 – and ZrO 2 –based mixed‐phase ultra‐thin films on silicon are applied to understand the necessary and beneficial conditions for NC stabilization. It is found that smaller ferroelectric grains and a larger angle of the polar axis with respect to the out‐of‐plane direction enhances the NC effect. Furthermore, it is shown that theoretically predicted negative domain wall coupling even along only one axis prevents NC stabilization. Therefore, it is concluded that topological domain walls play a critical role in experimentally observed NC phenomena in HfO 2 – and ZrO 2 –based ferroelectrics.

30 DIRECT ENERGY CONVERSION↗

DOE OSTI2024

A Sulfide‐Based Solid Electrolyte With High Humid Air Tolerance for Long Lifespan All‐Solid‐State Sodium Batteries

Abstract Sulfide‐based superionic conductors present great promise to achieve high energy density and safety for all‐solid‐state sodium batteries (ASSSBs). However, the poor electrolyte/electrode interface compatibility and humid air stability seriously hinder their deployment in ASSSBs. Herein, a series of high‐performance Na 3‐□ Sb 1‐4x (SnWCaTi) x S 4 sulfide‐based solid electrolytes (SSEs) are reported by coupling the vacancy effect with configurational entropy, which displays an excellent interface stability against sodium metal and an extraordinary tolerance toward the moist atmosphere, even for water. The optimized electrolyte effectively inhibits the detrimental mixed ion‐electron conducting interphase formation, achieving the ultra‐stable operation of Na–Na symmetric cell up to 1000 h. Furthermore, the Na + diffusion kinetics is obviously enhanced by increasing the Na sites local anisotropy and Na vacancies. Eventually, the assembled TiS 2 //Na 5 Sn ASSSBs deliver a remarkable reversible capacity of 211.6 mAh g −1 at 0.5C with a long‐term cycling performance of 450 cycles at room temperature. More importantly, it achieves a steady running up to 100 cycles at 1C even if this electrolyte is placed in the air with a dew temperature of 13.8 °C for 30 min, the highest values in the state‐of‐the‐art sulfide‐based ASSSBs. The well‐designed SSEs open a new avenue for realizing the advanced and powerful ASSSBs.

Guo, Yayu↗

DOE OSTI2025

Enhancing Cycle Life in Superoxide‐Based Na–O 2 Batteries by Reducing Interface Reactivity

Abstract Sodium–oxygen (Na–O 2 ) batteries are considered a promising energy storage alternative to current state‐of‐the‐art technologies owing to their high theoretical energy density, along with the natural abundance and low price of Na metal. The chemistry of these batteries depends on sodium superoxide (NaO 2 ) or peroxide (Na 2 O 2 ) being formed/decomposed. Most Na–O 2 batteries form NaO 2 , but reversibility is usually quite limited due to side reactions at interfaces. By using new materials, including a highly active catalyst based on vanadium phosphide (VP) nanoparticles, an ether/ionic liquid‐based electrolyte, and an effective sodium bromide (NaBr) anode protection layer, the sources of interface reactivity can be reduced to achieve a Na–O 2 battery cell that is rechargeable for 1070 cycles with a high energy efficiency of more than 83%. Density functional theory calculations, along with experimental characterization confirm the three factors leading to the long cycle life, including the effectiveness of the NaBr protective layer on the anode, a tetraglyme/EMIM‐BF 4 based electrolyte that prevents oxidation of the VP cathode catalyst surface, and the EMIM‐BF 4 ionic liquid aiding in avoiding electrolyte decomposition on NaO 2 .

Azaribeni, Adel [Department of Chemical and Biolog↗

DOE OSTI2024

Interfacial Engineering of Metal Chalcogenides‐based Heterostructures for Advanced Sodium‐Ion Batteries

Sodium-ion batteries (SIBs) have become one of the most promising candidates for large-scale energy storage applications. Metal chalcogenides anode materials based on alloying or conversion reactions are widely studied because of their high theoretical capacities and rich redox reactions. However, their intrinsic limitations such as high voltage hysteresis and large volume expansion hinder their further applications. The construction of heterostructures has become an attractive strategy to alleviate the above issues. Here, the formation of built in electric fields (BIEFs) at the heterointerfaces will accelerate the migration of Na + and electrons. Moreover, heterostructures can also enhance the structural stability, generate more active sites and provide additional capacity. It is worth noting that heterointerfacial properties play a significant role in promoting the overall electrochemical performance of the heterostructures. However, a systematic understanding of their interfacial engineering is currently lacking. This article reviews the research progress of metal chalcogenides-based heterostructure anode materials in the near term. First, the definition, classification and the roles of heterostructures are introduced. Second, the detailed research progress of the metal chalcogenide-based heterostructures anodes in SIBs is discussed. Finally, the future prospects and potential research directions of the heterostructures for batteries are discussed.

anode↗

DOE OSTI2025

Refining T c Prediction in Hydrides via Symbolic‐Regression‐Enhanced Electron‐Localization‐Function‐Based Descriptors

Hydrogen‐based materials are able to possess extremely high superconducting critical temperatures, T c s , due to hydrogen's low atomic mass and strong electron–phonon interaction. Recently, a descriptor based on the Electron Localization Function (ELF) has enabled the rapid estimation of the T c of hydrogen‐containing compounds from electronic networking properties, but its applicability has been limited by the small size and homogeneity of the training dataset used. Herein, the model is re‐examined, compiling a publicly available combined dataset of 244 binary and ternary hydride superconductors. The analysis shows that though ELF‐based networking remains a valuable descriptor, its predictive power declines with increasing compositional complexity. However, by introducing the molecularity index, defined as the highest value of the ELF at which two hydrogen atoms connect, and applying symbolic regression, the accuracy of the predictions can be substantially enhanced. These results establish a more robust framework for assessing superconductivity in hydride materials, facilitating accelerated screening of novel candidates through integration with crystal structure prediction methods or high‐throughput searches.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Extrusion‐Based Printing of Nanostructured Fatty Acid Gels Incorporated in Hydrogels

Soft materials with unique nanostructures such as lamellar, hexagonal, and cubic morphologies can replicate complex structures that have potential in various fields, including biomedical and industrial applications. However, a key challenge in advancing the broader applications of 3D printing for these nanostructured soft materials is insufficient mechanical properties that hinder their printability and compromise structural stability in the final product. In this study, the suitability of a fatty acid‐based lamellar gel is evaluated for direct extrusion‐based 3D printing. Here, the lamellar gel with varying water content is integrated with a photocurable hydrogel to preserve the shape and stability of the final prints. Complex 2D and 3D design patterns are used to assess extrusion behavior, structural stability, and print precision under varying pressures. Small‐angle X‐ray Scattering (SAXS) measurements reveal the formation of lamellar nanostructures and confirm their retention after photocuring in various gels. Rheological analysis confirms that these gels exhibit key properties suitable for extrusion‐based 3D printing, such as shear‐thinning behavior. Additionally, tensile testing is conducted to evaluate the mechanical properties across cured print samples. This study underscores the potential of nanostructured gels as a robust and versatile platform, facilitating the development of materials engineered for various applications.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Investigation of Corrosion Behavior of Carbide Phase Strengthened Nickel‐Based Alloy in Molten Fluoride Salt

The corrosion behavior of a high creep strength carbide-phase strengthened Ni-based alloy in molten FLiNaK (LiF-NaF-KF: 46.5-11.5-42 mol%) salt in the temperature range of 700°C–750°C has been investigated as a part of the development of structural alloys for fluoride salt-based molten salt reactors (MSRs). The alloy composition was designed based on Hastelloy-N, but with the goal of improving creep strength. Cr depletion depth, a measure of corrosion, was observed to be single micrometers after several hundred hours of corrosion testing. Sequential corrosion testing involving testing of pre-tested samples in fresh salt coupled with SEM-EDS, scanning transmission electron microscopy (STEM) examinations and thermodynamic and kinetic modeling, suggest that the corrosion rate at the alloy-salt interface is governed by diffusion of elements from the alloy bulk to the surface. The carbide phases in the corrosion-tested sample microstructure were identified to be largely M 6 C-type Mo-rich carbides and MC-type mixed carbides. Atom probe tomography (APT) showed some partitioning of Cr and Ti to the carbide phase and showed the carbide phases to be stable at the salt-facing surface.

Gordon, Ryan [Univ. of Wisconsin, Madison, WI (Uni↗