SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The characteristics of the low resistivity diode and the double epitaxial style diode are reported. Both met required breakdown voltage and capacitance voltage characteristics. The double epitaxial style diodes are expected to improve target efficiencies.
A laboratory model 8-cm thruster with improvements to minimize ion chamber erosion and peeling of sputtered metal was subjected to a cyclic endurance test for 15,040 hours and 460 restarts. A charted history of several thruster operating variables and off-normal events are shown in 600-hour segments at three points in the test. The transient behavior of these variables during a typical start-stop cycle is presented. Performance and operating characteristics were nearly constant throughout the test except for a change in the accelerator back-streaming limit. Findings of the post-test inspection confirmed most of the expected results. Charge-exchange ions caused normal accelerator grid erosion. The workability of the various design features have been substantiated, and attainable improvements in propellant utilization efficiency should significantly reduce accelerator erosion.
Charged particles ranging in energy from 0.8 to 4.0 MeV are used to induce resonant nuclear reactions, Coulomb excitation (gamma-rays), and X-ray emission in both thick and thin targets. Quantitative analysis is possible for elements from Li to Pb in complex environmental samples, although the matrix can severely reduce the sensitivity. It is necessary to use a comparator technique for the gamma-rays while for X-rays an internal standard can be used. A USGS standard rock is analyzed for a total of 28 elements. Water samples can be analyzed either by nebulizing the sample doped with Cs or Y a thin Formvar film or by extracting the sample onto ion exchange resin which is pressed into a pellet.
Twenty highland samples from Apollo 14, 15, and 17 and the eucrites Juvinas and Morre County were analyzed by radiochemical neutron activation for Ag, Au, Bi, Br, Cd, Cs, Ge, In, Ir, Ni, Os, Pd, Rb, Re, Sb, Se, Te, Tl, U, and Zn. The meteoritic components of 82 highland rocks were recalculated with the new corrections for the indigenous contribution and were classified by discriminant and cluster analysis as well as ternary diagrams, using Ir, Re, Au and Ni as diagnostic elements. To characterize these groups more fully, average abundances of meteoritic volatiles (Sb, Ge, Ag, Se, Te, and Bi) were calculated from regressions against Ir.
Explore the source record for details and available documents.
Of the 33 lunar samples considered in the investigation, 31 came from the North Ray Crater. The relationship between meteoritic component and rock type is studied. There appears to be some correlation between the meteoritic component, as given by the Ir/Au ratio, and the rock type, as given by the U content. The relation of ancient meteoritic components to basins and craters is examined, taking into account the resolution of groups, the relative ages from clast-matrix relations, assignments to specific basins or craters, and the relation between meteoritic components and Woenke's 'primary matter'. A table shows seven meteorite-free samples which are all low-alkali cataclastic anorthosites, or anorthositic clasts in light-matrix breccias. The origin of ancient meteoritic bodies are also investigated. The latest data strengthen earlier conclusions that the basin-forming objects were genetically related to the moon.
Explore the source record for details and available documents.
A thorough study of the role which foreign atoms play in cone formation during sputtering of metals revealed many experimental facts. Two types of cone formation were distinquished, deposit cones and seed cones. Twenty-six combinations of metals for seed cone formation were tested. The sputtering yield variations with composition for combinations which form seed cones were measured. It was demonstrated that whisker growth becomes a common occurrence when low melting point material is sputter deposited on a hot nonsputtered high melting point electrode.
Radiation damage and luminescence caused by magnetospheric charged particles have been suggested by several investigators as mechanisms that are capable of explaining some of the peculiar spectral/albedo features of Io. In the present paper, this possibility is pursued by measuring the UV-visual spectral reflectance and luminescent efficiency of several proposed Io surface constituents during 2 to 10 keV proton irradiation at room and low temperatures. The luminescence efficiencies of pure samples, studied in the laboratory, suggest that charged-particle induced luminescence from Io's surface might be observable by spacecraft such as Voyager when viewing Io's dark side.
The paper deals with some preliminary results of the Mission Profile Life Test planned to conduct a program of long-term test segments of 30-cm diameter thrusters and power processing units under computer control. Thruster performance data and other operational characteristics taken at various times during a test segment are compared and the results are evaluated in light of the life-timing mechanisms. Thruster control algorithms are also presented. The first test segment completed 2700 hr of a planned 4000 hr test with a J-series 30-cm thruster. The last 1600 hr used a functional model power processing unit (PPU) operated in vacuum. The thruster-PPU was controlled by a computer with software developed to control start-ups, throttling, and variety of off-normal conditions.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
The 30 cm J Series Thruster has been base-lined for the Solar Electric Propulsion Vehicle. This paper discusses the evolution of the thruster and details its performance, lifetime, and operational characteristics. An operational envelope covering nominal input powers of 2650 to 700 W is defined. Total thruster efficiencies over this envelope range from 0.711 to 0.472 with a corresponding impulse and thrust ranging from 2980 to 1850 sec and 129.1 to 36.4 mN, respectively. Completed life test segments and the ability of the thruster to meet the design goal of 15,000 hr of life as well as the life limitations are discussed. A description and rationale of the present set of thruster operational control algorithms is also presented.
A molecular beam facility to simulate the space environment of a spacecraft at low orbit was designed with the intent of studying the effect on the properties of optical elements of oxygen atoms impacting at orbital velocity. The four-stage differentially pumped molecular beam facility includes a variety of oxygen atom beam sources which cover a wide range of velocities (1 km/sec to approximately 8 km/sec), in addition to the ultra-clean experimental environmental of an ultra-high vacuum chamber and an optical diagnostic set-up. The primary oxygen atom beam source used to obtain the 8 km/sec O atoms is an arc heated source. It consists of a modified commercially available plasma torch. The modifications include attachments which provide for a nozzle which is used to expand the atomic beam into the vacuum system, and exhaust channels to dispose of excess torch gas. The torch operates in the 'nontransferred' mode of operation, that is the electric arc is confined within the torch. A plasma is formed in helium by a dc arc. A small amount of O2 is injected downstream from the arc where it is thermally dissociated by the hot He into oxygen atoms. The high temperature and isentropic expansion give the oxygen atoms their velocity. Using seeded beam techniques, oxygen atom beams of approximately 3.5 and approximately 1.5 km/sec, respectively, are obtained.
(Previously cited in issue 12, p. 1963, Accession no. A81-29571)
Explore the source record for details and available documents.
The present investigation is concerned with the suitability of the virtual phase CCD imager for frontside detection of electrons up to 25 keV. The investigation has the objective to determine if the imager can be used in the frontside mode with a photocathode to detect very low light levels in astronomical applications, the ultimate goal being individual photon detection. It is found that the standard virtual phase imager will function properly over an extended period at low levels of 20 kV electron irradiation consistent with photon counting applications. The imager can detect individual primary electrons with nearly 100 percent efficiency. However, further studies are needed to determine the mechanisms for the flat band shifts so that the imager design may be modified to eliminate or at least reduce them.