Search NASA⌕ Search

SEARCH · Search NASA

Results for “buffer layers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Ultrathin epitaxial barrier layer to avoid thermally induced phase transformation in oxide heterostructures

Incorporating oxides with radically different physical and chemical properties into heterostructures offers tantalizing possibilities to derive new functions and structures. Recently, we have fabricated freestanding 2D oxide membranes using the water-soluble perovskite Sr 3 Al 2 O 6 as a sacrificial buffer layer. Here, with atomic-resolution spectroscopic imaging, we observe that direct growth of oxide thin films on Sr 3 Al 2 O 6 can cause complete phase transformation of the buffer layer, rendering it water-insoluble. More importantly, we demonstrate that an ultrathin SrTiO 3 layer can be employed as an effective barrier to preserve Sr 3 Al 2 O 6 during subsequent growth, thus allowing its integration in a wider range of oxide heterostructures.

36 MATERIALS SCIENCE↗

Strain relaxation in GaN/Al{sub x}Ga{sub 1-x}N superlattices grown by plasma-assisted molecular-beam epitaxy

We have investigated the misfit relaxation process in GaN/Al{sub x}Ga{sub 1-x}N (x = 0.1, 0.3, 0.44) superlattices (SL) deposited by plasma-assisted molecular beam epitaxy. The SLs under consideration were designed to achieve intersubband absorption in the mid-infrared spectral range. We have considered the case of growth on GaN (tensile stress) and on AlGaN (compressive stress) buffer layers, both deposited on GaN-on-sapphire templates. Using GaN buffer layers, the SL remains almost pseudomorphic for x = 0.1, 0.3, with edge-type threading dislocation densities below 9 x 10{sup 8} cm{sup -2} to 2 x 10{sup 9} cm{sup -2}. Increasing the Al mole fraction to 0.44, we observe an enhancement of misfit relaxation resulting in dislocation densities above 10{sup 10} cm{sup -2}. In the case of growth on AlGaN, strain relaxation is systematically stronger, with the corresponding increase in the dislocation density. In addition to the average relaxation trend of the SL, in situ measurements indicate a periodic fluctuation of the in-plane lattice parameter, which is explained by the different elastic response of the GaN and AlGaN surfaces to the Ga excess at the growth front. The results are compared with GaN/AlN SLs designed for near-infrared intersubband absorption.

36 MATERIALS SCIENCE↗

Favorable electronic structure for organic solar cells induced by strong interaction at interface

To clarify the role of buffer layer in organic solar cells (OSCs), the electronic properties of bathocuproine (BCP)/Mg interface were systematically investigated by using ultraviolet photoemissions spectroscopy, high-resolution X-ray photoemission spectroscopy, angle-resolved X-ray photoemission spectroscopy and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. The results show there are gap states at the interface, which are caused by the interaction between BCP and Mg. The formation of Mg-N bond was found at the interface. The NEXAFS measurements show that BCP molecules for 1-2 monolayers are lying-down on the substrate, whereas orient randomly for thick BCP layer. It was supposed that the gap states and the highly-ordered orientation of thin BCP layer are the reasons for improving the performance of OSC with BCP buffer layer and low work function metal cathode.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth of GaAs on single-crystal layered-2D Bi 2 Se 3

This article demonstrates the successful growth of cubic GaAs (111) on single-crystal 2D layered Bi 2 Se 3 (0001) substrates achieved using a cubic ZnSe buffer layer. This growth sequence was chosen based upon observed reactions between Bi 2 Se 3 (0001) substrates and both Ga and Zn. For the conditions used in our MOCVD reactor, triethylgallium (TEGa) interacts strongly with Bi 2 Se 3 to form Ga 2 Se 3 , which can disrupt the nucleation and growth of GaAs. Therefore, a buffer layer is needed which prevents Ga-Bi 2 Se 3 interactions while simultaneously providing a suitable growth surface for GaAs. ZnSe was chosen because it is lattice-matched to GaAs, and can be created by annealing the Bi2Se3 under a diethylzinc (DEZn) flux. A sample utilizing this growth sequence has been grown, characterized and exfoliated as a possible pathway toward reducing the substrate cost for III-V devices such as solar cells.

14 SOLAR ENERGY↗

Thermally enhanced perpendicular magnetic anisotropy behaviors of ultrathin [Co/Pd]{sub n} multilayers via NiO{sub x} capping layer

We report the enhanced perpendicular magnetic anisotropy (PMA) features of ultrathin [Co/Pd]{sub 3} multilayers (MLs) employing a NiO{sub x} insertion layer at high annealing temperatures. Thermally enhanced PMA in [Co/Pd]{sub 3}/NiO{sub x} (capping layer) MLs were achieved at a specific capping layer thickness, while no PMA responses were observed for a NiO{sub x} (buffer layer)/[Co/Pd]{sub 3} ML, regardless of NiO{sub x} thickness. X-ray diffraction observations, including rocking curves, identified the relatively different crystalline characteristics of the NiO{sub x} capping and buffer layers. Origin of the enhanced PMAs of [Co/Pd]{sub 3} MLs containing a NiO{sub x} capping layer is described based on the NiO{sub x} capping effect possibly providing additional Co/Oxide i-PMA under high-temperature annealing.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High mobility AlGaN/GaN heterostructures grown on Si substrates using a large lattice-mismatch induced stress control technology

A large lattice-mismatch induced stress control technology with a low Al content AlGaN layer has been used to grow high quality GaN layers on 4-in. Si substrates. The use of this technology allows for high mobility AlGaN/GaN heterostructures with electron mobility of 2040 cm{sup 2}/(V·s) at sheet charge density of 8.4 × 10{sup 12 }cm{sup −2}. Strain relaxation and dislocation evolution mechanisms have been investigated. It is demonstrated that the large lattice mismatch between the low Al content AlGaN layer and AlN buffer layer could effectively promote the edge dislocation inclination with relatively large bend angles and therefore significantly reduce the dislocation density in the GaN epilayer. Our results show a great potential for fabrication of low-cost and high performance GaN-on-Si power devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preparation of arrays of long carbon nanotubes using catalyst structure

A structure for preparing an substantially aligned array of carbon nanotubes include a substrate having a first side and a second side, a buffer layer on the first side of the substrate, a catalyst on the buffer layer, and a plurality of channels through the structure for allowing a gaseous carbon source to enter the substrate at the second side and flow through the structure to the catalyst. After preparing the array, a fiber of carbon nanotubes may be spun from the array. Prior to spinning, the array can be immersed in a polymer solution. After spinning, the polymer can be cured.

36 MATERIALS SCIENCE↗

High work function MoO2 back contacts for improved solar cell performance

Improved high work function back contacts for solar cells are provided. In one aspect, a method of forming a solar cell includes: forming a completed solar cell having a substrate coated with an electrically conductive material, an absorber disposed on the electrically conductive material, a buffer layer disposed on the absorber, a transparent front contact disposed on the buffer layer, and a metal grid disposed on the transparent front contact; removing the substrate and the electrically conductive material using exfoliation, exposing a backside surface of the solar cell; depositing a high work function material onto the back side surface of the solar cell; and depositing a back contact onto the high work function material. A solar cell formed by the present techniques is also provided. Yield of the exfoliated device can be improved by removing bubbles from adhesive used for exfoliation and/or forming contact pads to access the metal grid.

14 SOLAR ENERGY↗

High work function MoO2 back contacts for improved solar cell performance

Improved high work function back contacts for solar cells are provided. In one aspect, a method of forming a solar cell includes: forming a completed solar cell having a substrate coated with an electrically conductive material, an absorber disposed on the electrically conductive material, a buffer layer disposed on the absorber, a transparent front contact disposed on the buffer layer, and a metal grid disposed on the transparent front contact; removing the substrate and the electrically conductive material using exfoliation, exposing a backside surface of the solar cell; depositing a high work function material onto the back side surface of the solar cell; and depositing a back contact onto the high work function material. A solar cell formed by the present techniques is also provided. Yield of the exfoliated device can be improved by removing bubbles from adhesive used for exfoliation and/or forming contact pads to access the metal grid.

Antunez, Priscilla D.↗

PIE on Five Irradiated AGR-1 Compacts

Post-irradiation examination (PIE) is in progress on coated particle fuel compacts from the first Advanced Gas Reactor irradiation experiment (AGR-1). PIE has been completed on five compacts at the Oak Ridge National Laboratory (ORNL). Three compacts (Compacts 6-1-1, 4-4-2, and 5-2-3) were examined in the as-irradiated condition and two compacts (Compacts 6-4-3 and 3-3-2) were subjected to safety testing at 1600°C, followed by post-safety testing examination similar to the PIE performed on the as-irradiated compacts. All compacts were subjected to a standard set of analyses that included the following: (1) detection of exposed fission products by Deconsolidation-Leach-Burn-Leach (DLBL), (2) measurement of gamma-emitting fission product inventory using the Irradiated Microsphere Gamma Analyzer (IMGA), and (3) microstructural examination by x-ray tomography and materialography. The equipment and methods used are reported in detail in ORNL/TM-2012/233, AGR-1 Irradiated Compact 6-1-1 PIE Report, and have been summarized in the next section of this report. This report also provides a brief summary of the results of the completed PIE. Preliminary trends are discussed in this report, but final conclusions will require the support of additional data and further analysis. A separate report is being generated for each AGR-1 compact after PIE is complete that describes in detail the examinations performed and fully documents the data obtained. A final AGR-1 PIE summary report will compile all available data and provide a more comprehensive analysis of the AGR-1 fuel performance. In general, it was observed that the tristructural isotropic (TRISO) coated particles remained intact during irradiation and subsequent safety testing to 1600°C. No significant gaseous 85 Kr release was detected during the irradiation or high temperature safety testing, which would be indicative of simultaneous failure of all three outer layers of the TRISO coating. Only three particles with defective SiC layers were detected in the five compacts included in this summary. These particles were detected because they released a significant fraction of their cesium inventory, which was generally well retained. Two particles from Compact 5-2-3 released cesium during irradiation and one particle from Compact 3-3-2 released cesium during safety testing. However, it is evident that some fission products were released through intact SiC during irradiation. Most of these fission products were trapped in the compact matrix, where they could be analyzed by PIE. In terms of fractional release, the main fission products detected outside intact SiC were silver, palladium, and europium. The main impact of irradiation on the microstructure of the TRISO-coating layers was densification and shrinkage of the buffer layer, which often led to buffer fracture and subsequent enhanced swelling of the kernel. Some inner pyrocarbon (IPyC) layers were cracked by the radiation-induced changes in the buffer layer, and on rare occasion these cracks propagated into the SiC. In the two particles that released cesium during irradiation, these SiC cracks penetrated through the entire layer. The particle from Compact 3-3-2 that released cesium was not directly related to irradiation damage. Its SiC layer was determined to be porous as a result of a fabrication defect that occurs when a particle is over-fluidized in the coater, causing it to pick up carbon soot on the surface of the IPyC prior to SiC deposition. This porous SiC layer remained sufficiently intact during irradiation to retain cesium, but finally cracked during high temperature testing. Analysis of fission products remaining in the coated particles showed that the retention of silver varied dramatically from particle-to-particle within each compact. Examination with the IMGA determined that some particles contained a level of 110m Ag equivalent to that calculated to have been generated over the three-year irradiation period, while other particles contained too little to be detected by the gamma analysis. The mechanism for silver release is still being investigated. Attempts to correlate the varied release behavior to obvious radiation-induced changes in the coating layers have not been successful. Scanning electron microscopy (SEM) has provided some evidence that particles with higher silver release also show greater penetration of palladium silicide into the SiC layer, and this should be studied further.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Structural and resistance switching properties of ZnO/SrTiO{sub 3}/GaAs heterostructure grown by laser molecular beam epitaxy

ZnO thin films were epitaxially grown on (001) GaAs substrate by laser molecular beam epitaxy with SrTiO{sub 3} (STO) as a buffer layer. The interface properties of ZnO/GaAs heterostructure are greatly improved by inserting STO buffer layer. The interfacial effects on the transport and dielectric characteristics of the heterostructure have been investigated. The current-voltage characteristic of the heterostructure reveals an asymmetric and resistance switching behavior, exhibiting a temperature-dependent resistance hysteresis in the temperature range of 50-300 K. These measured properties could be attributed to the charge effect at the interface of the heterostructure.

36 MATERIALS SCIENCE↗

Transparent TiO 2 nanotube array photoelectrodes prepared via two-step anodization

Two-step anodization of transparent TiO 2 nanotube arrays has been demonstrated with aid of a Nb-doped TiO 2 buffer layer deposited between the Ti layer and TCO substrate. Enhanced physical adhesion and electrochemical stability provided by the buffer layer has been found to be important for successful implementation of the two-step anodization process. As a result, with the proposed approach, the morphology and thickness of NT arrays could be controlled very precisely, which in turn, influenced their optical and photoelectrochemical properties.

14 SOLAR ENERGY↗

Ce- and Ni-Codoped Double PrBaMn 2 O 5 Perovskite as a Ceramic SOFC Anode

This study explores the efficacy of cerium introduction, both on its own and in combination with nickel, into PrBaMn 2 O 5+δ (PBM) structures to enhance solid oxide fuel cell (SOFC) anodes. We synthesized Pr 1–x Ce x BaMn 2 O 5+δ compositions for x values of 0.05 (PrCe5) and 0.1 (PrCe10), as well as a nickel-doped variant (PrCe5Ni), assessing their performance under H 2 – 3% H 2 O reducing conditions pertinent to SOFC anode operations. Our findings reveal that the PrCe5 composition exhibits a thermal expansion coefficient (TEC) that not only improves upon that of the Ce-free counterpart but also aligns closely with the TEC standards of prevalent SOFC electrolytes. A notable advancement was achieved with the application of a 3.5 μm gadoliniadoped ceria (GDC) buffer layer through physical vapor deposition, effectively mitigating chemical interactions between PBM-based anodes and yttria-stabilized zirconia (YSZ) electrolytes, a concern highlighted by in situ neutron diffraction analyses. Electrochemical impedance spectroscopy, conducted over 220 h in a H 2 –3% H 2 O atmosphere at 750 °C, demonstrated that the optimal 3.5 μm thickness of the GDC buffer layer significantly minimizes the area-specific resistance (ASR) degradation rate to 0.002 Ω cm 2 /h, markedly outperforming both thinner (1 μm) and thicker (8 μm) GDC layers, which showed higher degradation rates of 0.15–0.2 Ω cm 2 /h due to the diffusion of Ba ions or delamination. Moreover, cerium doping fosters superior microstructural stability and obviates barium diffusion, thereby suggesting an enhanced durability of the doped anodes over their lifespan. Integrating nickel into the PrCe5 structure halved the ASR to 0.5 Ω cm 2 at 750 °C, situating it well within the ideal performance range for SOFC anodes. Furthermore, the enhancement brought about by simultaneously doping PBM with cerium and nickel, which fundamentally relies on the critical contributions of defect chemistry and crystal structure, highlights the significance of these fields in creating sophisticated materials for energy related applications.

25 ENERGY STORAGE↗

Dielectric relaxation analysis of Pb(Zr{sub 0.54},Ti{sub 0.46})O{sub 3} thin films: Electric field dependence

350 nm-thick Perovskite PbZr{sub 0.54}Ti{sub 0.46}O{sub 3} (PZT) thin films were deposited on Al{sub 2}O{sub 3} substrates by sputtering with and without an additional 10-nm-thick TiO{sub x} buffer layer. X-ray diffraction patterns showed that in presence of TiO{sub x} buffer layer, PZT film was highly oriented along the (111) direction film, whereas the unbuffered, counterpart was polycrystalline. A full wave electromagnetic analysis using a vector finite element method was performed to determine the tunability and the complex permittivity up to 67 GHz. A comparison between the electromagnetic analysis and Cole-Cole relaxation model was proposed. Through an original study of the relaxation time as a function of the electric field, values, such as 2 ps and 0.6 ps, were estimated for E{sub DC} = 0 kV/cm and 235 kV/cm, respectively, and in both cases (111)-PZT and polycrystalline-PZT. The distribution of relaxation times is found to be larger for (111)-PZT film, which is probably related to the film microstructure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Superconducting phase of Ti x O y thin films grown by molecular beam epitaxy

Here we investigate the complex relationship between the growth conditions and the structural and transport properties of Ti x O y thin films grown by molecular beam epitaxy. Transport properties ranging from metallicity to superconductivity and insulating states are stabilized by effectively tuning the O/Ti ratio via the Ti flux rate and the O partial pressure P Ox for films grown on (0001)-Al 2 O 3 substrates at 850° C. A cubic c-TiO 1±δ buffer layer is formed for low O/Ti ratios, while a corundum cr-Ti 2 O 3 layer is formed under higher-oxidizing conditions. Metallicity is observed for c-TiO 1-δ buffer layers. The superconducting γ -Ti 3 O 5 Magnéli phase is found to nucleate on a c-TiO 1-δ buffer for intermediate POx conditions, and an insulator-superconducting transition is observed at 4.5 K (T$^{onset}_{C}$ = 6K) for 85 nm thick films. Strain relaxation of γ -Ti 3 O 5 occurs with increasing film thickness and correlates with a thickness-dependent increase in T C observed for Ti x O y thin films.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

CMOS-Compatible Ultrathin Superconducting NbN Thin Films Deposited by Reactive Ion Sputtering on 300 mm Si Wafer

We report a milestone in achieving large-scale, ultrathin (~5 nm) superconducting NbN thin films on 300 mm Si wafers using a high-volume manufacturing (HVM) industrial physical vapor deposition (PVD) system. The NbN thin films possess remarkable structural uniformity and consistently high superconducting quality across the entire 300 mm Si wafer, by incorporating an AlN buffer layer. High-resolution X-ray diffraction and transmission electron microscopy analyses unveiled enhanced crystallinity of (111)-oriented δ-phase NbN with the AlN buffer layer. Notably, NbN films deposited on AlN-buffered Si substrates exhibited a significantly elevated superconducting critical temperature (~2 K higher for the 10 nm NbN) and a higher upper critical magnetic field or H c2 (34.06 T boost in H c2 for the 50 nm NbN) in comparison with those without AlN. These findings present a promising pathway for the integration of quantum-grade superconducting NbN films with the existing 300 mm CMOS Si platform for quantum information applications.

36 MATERIALS SCIENCE↗

Influence of piezoelectric strain on the Raman spectra of BiFeO 3 films deposited on PMN-PT substrates

In this study, BiFeO 3 epitaxial thin films were deposited on piezoelectric 0.72Pb(Mg 1/3 Nb 2/3 )O 3 -0.28PbTiO 3 (PMN-PT) substrates with a conductive buffer layer (La 0.7 Sr 0.3 MnO 3 or SrRuO 3 ) using pulsed laser deposition. The calibration of the strain values induced by the electric field applied on the piezoelectric PMN-PT substrates was realised using X-Ray diffraction measurements. The method of piezoelectrically induced strain allows to obtain a quantitative correlation between strain and the shift of the Raman-active phonons, ruling out the influence of extrinsic factors, such as growth conditions, crystalline quality of substrates, or film thickness. Using the Poisson number for BiFeO 3 one can determine the volume change induced by strain, and therefore the Gr neisen parameters for specific phonon modes.

36 MATERIALS SCIENCE↗

Specific features of NH{sub 3} and plasma-assisted MBE in the fabrication of III-N HEMT heterostructures

The specific features of how nitride HEMT heterostructures are produced by NH{sub 3} and plasma-assisted (PA) molecular-beam epitaxy (MBE) are considered. It is shown that the use of high-temperature AlN/AlGaN buffer layers grown with ammonia at extremely high temperatures (up to 1150°C) can drastically improve the structural perfection of the active GaN layers and reduce the dislocation density in these layers to values of 9 × 10{sup 8}−1 × 10{sup 9} cm{sup −2}. The use of buffer layers of this kind makes it possible to obtain high-quality GaN/AlGaN heterostructures by both methods. At the same time, in contrast to ammonia MBE which is difficult to apply at T < 500°C (because of the low efficiency of ammonia decomposition), PA MBE is rather effective at low temperatures, e.g., for the growth of InAlN layers lattice-matched with GaN. The results obtained in the MBE growth of AlN/AlGaN/GaN/InAlN heterostructures by both PA-MBE and NH{sub 3}-MBE with an extremely high ammonia flux are demonstrated.

36 MATERIALS SCIENCE↗