Search NASA⌕ Search

SEARCH · Search NASA

Results for “complex oxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Surface acoustic wave generation and detection in the quantum paraelectric regime of SrTiO 3 -based heterostructures

Strontium titanate (STO), apart from being a ubiquitous substrate for complex-oxide heterostructures, possesses a multitude of strongly coupled electronic and mechanical properties. Surface acoustic wave (SAW) generation and detection offers insight into electromechanical couplings that are sensitive to quantum paraelectricity and other structural phase transitions. Propagating SAWs can interact with STO-based electronic nanostructures, in particular LaAlO 3 /SrTiO 3 (LAO/STO). Here, we report the generation and detection of SAW within LAO/STO heterointerfaces at cryogenic temperatures ( T ≥ 2 K) using superconducting interdigitated transducers. Further, the temperature dependence shows an increase in the SAW quality factor that saturates at T ≈ 8 K. The effect of backgate tuning on the SAW resonance frequency shows the possible acoustic coupling with the ferroelastic domain wall evolution. This method of generating SAWs provides a pathway towards the dynamic tuning of ferroelastic domain structures, which are expected to influence the electronic properties of complex-oxide nanostructures. Devices that incorporate SAWs may in turn help to elucidate the role of ferroelastic domain structures in mediating electronic behavior.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Reconstruction-stabilized epitaxy of LaCoO 3 /SrTiO 3 (111) heterostructures by pulsed laser deposition

Unlike widely explored complex oxide heterostructures grown along [001], the study of [111]-oriented heterointerfaces is very limited thus far. One of the main challenges is to overcome the polar discontinuity that hinders the epitaxy of atomically sharp interfaces. Here, by taking LaCoO 3 /SrTiO 3 (111) as a prototype, we show that the reconstruction, which effectively compensates the surface polarity, can stabilize the epitaxy of the heterostructure with polar discontinuity. A reconstructed substrate surface is prepared, while the growth is controlled to form reconstruction on the film surface. To suppress the chemical diffusion across the interface, the growth is interrupted between each unit cell layer to allow the lattice relaxation at a lowered temperature. In this way, high quality two-dimensional growth is realized and the heterointerfaces exhibit sharpness at the atomic scale. As a result, our work provides a path to precisely control the growth of complex oxide heterostructures along polar orientations that exhibit emergent quantum phenomena.

36 MATERIALS SCIENCE↗

The Role of Gas in Determining Image Quality and Resolution During In Situ Scanning Transmission Electron Microscopy Experiments

As gas-solid heterogeneous catalytic reactions are molecular in nature, a full mechanistic understanding of the process requires atomic scale characterization under realistic operating conditions. While atomic resolution imaging has become a routine in modern high-vacuum (scanning) transmission electron microscopy ((S)TEM), both image quality and resolution nominally degrade when reaction gases are introduced. In this work, we systematically assess the effects of different gases at various pressures on the quality and resolution of images obtained at room temperature in the annular dark field STEM imaging mode using a differentially pumped (DP) gas cell. This imaging mode is largely free from inelastic scattering effects induced by the presence of gases and retains good imaging properties over a wide range of gas mass/pressures. We demonstrate the application of the ESTEM with atomic resolution images of a complex oxide alkane oxidation catalyst MoVNbTeOx (M1) immersed in light and heavy gas environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interface creation on a mixed-terminated perovskite surface

In the field of complex oxide heterostructures, understanding of the initial substrate surface can be critical to fundamental studies regarding the development of emergent properties at the film–substrate interface. For this reason, a considerable amount of effort has gone into the development of techniques to achieve surfaces with single termination for a variety of perovskite single crystals. However, a decisive understanding of how an interface is created when epitaxial growth occurs on a mixed terminated surface remains lacking. Employing in situ synchrotron X-ray scattering during thin film growth by molecular beam epitaxy, we investigate the initial stages of growth on (LaAlO 3 )(Sr 2 AlTaO 6 ) (001) substrates with mixed termination. Using LaNiO 3 as a model system, we find that the surface layers of the substrate restructure during deposition such that while a NiO 2 monolayer is weakly bound, a LaO monolayer bonds strongly, effectively incorporating with (Al, Ta)O 2 from the surface and forming a La(Al, Ta)O 3 ultrathin film. <!--/abstract content--><!--fulltext content--> With regard to the synthesis of high-quality complex oxide heterostructures, it is important that the substrate meet an array of criteria related to the crystal structure, lattice parameter, thermodynamic properties, electrical and optical properties, and so on. In particular, the surface of the substrate should be atomically smooth and exhibit the step-terrace structure ideal for epitaxial thin film growth. Perovskite oxides with the formula ABO 3 have two possible (001) surfaces: AO (A-site termination) and BO 2 (B-site termination). The ability to consistently achieve one of these surface terminations on SrTiO 3 , i.e., TiO 2 , has helped SrTiO 3 become the predominant oxide in the field.

36 MATERIALS SCIENCE↗

Domain- and symmetry-transition origins of reduced nanosecond piezoelectricity in ferroelectric/dielectric superlattices

Complex-oxide superlattices (SLs) with atomic-scale periodicity have dynamical properties that are distinct from thin films of uniform composition. The origins of these properties are closely related to the dynamics of polarization domains and to field-driven changes in the symmetries resulting from interfacial coupling between different components. These dynamics are apparent at timescales from a few nanoseconds to several milliseconds in experiments probing the piezoelectricity of a ferroelectric/dielectric BaTiO{sub 3}(BTO)/CaTiO{sub 3} (CTO) SL using time-resolved x-ray microdiffraction. At the 100 ns timescale, the piezoelectric distortion is approximately ten times smaller than in the millisecond regime. This reduced piezoelectricity at short timescales is not observed in previously studied PbTiO{sub 3}/SrTiO{sub 3} SLs or compositionally uniform ferroelectrics such as tetragonal compositions of Pb(Zr,Ti)O{sub 3}. The unusual behavior of the BTO/CTO SL can be linked to the switching of a nanodomain state into a uniform polarization state or to a field-induced crystallographic symmetry transition. A comparison of the results with the characteristic timescales of these two dynamical phenomena in other complex oxides with different compositions suggests that the phase transition is a more likely possibility.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Component-specific electromechanical response in a ferroelectric/dielectric superlattice.

The electronic and electromechanical properties of complex oxide superlattices are closely linked to the evolution of the structure and electrical polarization of the component layers in applied electric fields. Efforts to deduce the responses of the individual components of the superlattice to applied fields have focused on theoretical approaches because of the limitations of available experimental techniques. Time-resolved x-ray microdiffraction provides a precise crystallographic probe of each component using the shift in wave vector and change in intensity of superlattice satellite reflections. We report in detail the methods to measure and analyze the x-ray diffraction patterns in applied electric field and their application to a 2-unit-cell BaTiO{sub 3}/4-unit-cell CaTiO{sub 3} superlattice. We find that the overall piezoelectric distortion is shared between the two components. Theoretical predictions of the electromechanical properties of a superlattice with the same composition constrained to tetragonal symmetry are in excellent agreement with the experiments. Lattice instability analysis, however, suggests that the low-temperature ground state could exhibit antiferrodistortive rotations of TiO{sub 6} octahedra within and/or at the interfaces of the CaTiO{sub 3} component.

36 MATERIALS SCIENCE↗

Twinning and Dislocation Pileups in Heavily Implanted LiNbO3

The nature of a striking pattern of extended defects formed by very high dose implantation of helium in a complex oxide, for example, ferroelectricz-cut LiNbO{sub 3}, is studied. After irradiation, a high concentration of defects is found to collect and create a network of thick prismatic planar defects, which have typical dimensions of {approx}1.5 {micro}m and 200 nm parallel and perpendicular to the z axis, respectively. This defect network and its effect on the lattice were studied using a set of x-ray and electron microscopy probes of the lattice structure and spatial variation. Optical microscopy shows that there is strong temperature dependence for forming the network; the density of these extended defects reaches a maximum value for an annealing temperature of 250 C but is fully eliminated by a temperature of 380 C. High-resolution transmission electron microscopy studies indicate that these extended defects are probably localized twinning and dislocation pileups due to plastic deformation of the lattice to relieve He-implantation-induced stress. During this deformation, He accumulates at the twin boundaries. The study also shows that the He interstitials evolve into bubbles causing high stress and resulting in a formation of thick prismatic planar defects. Finally, a mechanism is proposed for defect creation and elimination.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

New complex bismuth oxides in the Bi{sub 2}O{sub 3}–NiO–Sb{sub 2}O{sub 5} system and their properties

Phase equilibria in the Bi{sub 2}O{sub 3}–NiO–Sb{sub 2}O{sub 5} system have been investigated. The isothermal section of the system (650°) has been constructed. For the first time the existence of the pyrochlore structure solid solution, (Bi{sub 2−x}Ni{sub x})Ni{sub 2/3−y}Sb{sub 4/3+y}O{sub 7±δ}, x=0.1−0.35, y=0−0.1, and a new compound Bi{sub 3}Ni{sub 2/3}Sb{sub 7/3}O{sub 11} of KSbO{sub 3} structure type have been discovered. The structures and properties of these compounds were studied by XRD, XAFS, diffuse reflection spectroscopy and magnetic methods. Rietveld refinement of synchrotron radiation-based powder XRD data for pyrochlore sample of 38.43Bi{sub 2}O{sub 3}–33.0NiO–28.57Sb{sub 2}O{sub 5} composition and Bi{sub 3}Ni{sub 2/3}Sb{sub 7/3}O{sub 11} compound was performed. The best possible refinement of the positional parameters for both pyrochlore and Bi{sub 3}Ni{sub 2/3}Sb{sub 7/3}O{sub 11} structures was achieved for disordered models. Magnetic, diffuse reflection and an X-ray absorption spectroscopy study confirmed that in both compounds nickel ions are mainly in a 2+ oxidation state. According to magnetic data, Bi{sub 1.84}Ni{sub 0.16}(Ni{sub 0.63}Sb{sub 1.37})O{sub 7} pyrochlore and Bi{sub 3}Ni{sub 2/3}Sb{sub 7/3}O{sub 11} are overall paramagnetic in nature. - Graphical abstract: Isothermal section of the Bi{sub 2}O{sub 3}–NiO–Sb{sub 2}O{sub 5} system at 650 °C in air and variation of magnetic susceptibility and inverse susceptibility with temperature for Bi{sub 1.84}Ni{sub 0.79}Sb{sub 1.37}O{sub 7} pyrochlore. - Highlights: • We have constructed the isothermal section of the system Bi{sub 2}O{sub 3}–NiO–Sb{sub 2}O{sub 5}. • The boundaries of pyrochlore structure solid solution have been determined. • New Bi{sub 3}Ni{sub 2/3}Sb{sub 7/3}O{sub 11} compound of KSbO{sub 3} structure type have been discovered. • The structures were studied by means of synchrotron X-ray diffraction and XAFS. • Magnetic measurements revealed that both compounds are paramagnetic at 2–350 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dielectric relaxation in complex perovskite oxide In(Ni{sub 1/2}Zr{sub 1/2})O{sub 3}

The dielectric study of indium nickel zirconate, In(Ni{sub 1/2}Zr{sub 1/2})O{sub 3} (INZ) synthesized by solid state reaction technique is performed in a frequency range from 500 Hz to 1 MHz and in a temperature range from 303 to 493 K. The X-ray diffraction analysis shows that the compound is monoclinic. A relaxation is observed in the entire temperature range as a gradual decrease in {epsilon}'({omega}) and as a broad peak in {epsilon}''({omega}) in the frequency dependent real and imaginary parts of dielectric constant, respectively. The frequency dependent electrical data are analyzed in the framework of conductivity and electric modulus formalisms. The frequencies corresponding to the maxima of the imaginary electric modulus at various temperatures are found to obey an Arrhenius law with activation energy of 0.66 eV. The Cole-Cole model is used to study the dielectric relaxation of INZ. The scaling behaviour of imaginary part of electric modulus suggests that the relaxation describes the same mechanism at various temperatures. The frequency dependent conductivity spectra follow the universal power law.

36 MATERIALS SCIENCE↗

Hydrolytic cleavage of both CS 2 carbon–sulfur bonds by multinuclear Pd(II) complexes at room temperature

Developing homogeneous catalysts that convert CS 2 and COS pollutants into environmentally benign products is important for both fundamental catalytic research and applied environmental science. Here we report a series of air-stable dimeric Pd complexes that mediate the facile hydrolytic cleavage of both CS 2 carbon–sulfur bonds at 25 °C to produce CO 2 and trimeric Pd complexes. Oxidation of the trimeric complexes with HNO 3 regenerates the dimeric starting complexes with the release of SO 2 and NO 2 . Isotopic labelling confirms that the carbon and oxygen atoms of CO 2 originate from CS 2 and H 2 O, respectively, and reaction intermediates were observed by gas-phase and electrospray ionization mass spectrometry, as well as by Fourier transform infrared spectroscopy. We also propose a plausible mechanistic scenario based on the experimentally observed intermediates. Here, the mechanism involves intramolecular attack by a nucleophilic Pd–OH moiety on the carbon atom of coordinated µ-OCS 2 , which on deprotonation cleaves one C–S bond and simultaneously forms a C–O bond. Coupled C–S cleavage and CO 2 release to yield [(bpy) 3 Pd 3 ( µ3 -S) 2 ](NO 3 ) 2 (bpy, 2,2'-bipyridine) provides the thermodynamic driving force for the reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Novel complex ceramic oxides, Ln 2 TiO 5 (Ln = La, Sm, Gd, Tb, Dy, Ho, Er, and Yb), for polyphase nuclear waste‐forms

Abstract As part of a broader study of ceramic nuclear waste‐forms, four different lanthanide titanates were fabricated; La 0.1 Sm 0.1 Gd 0.1 Tb 0.1 Dy 0.3 Ho 0.1 Er 0.2 YbTiO 5 , Sm 0.3 Gd 0.3 Dy 0.3 Yb 1.1 TiO 5 , Sm 0.1 Gd 0.4 Dy 0.4 Yb 1.1 TiO 5 , and Sm 0.2 Gd 0.2 Dy 0.2 Yb 1.4 TiO 5 . The aim was to produce single‐phase novel materials with cubic symmetry, capable of incorporating a wide variety of cations and with acceptable radiation tolerance. The chemistry flexibility and radiation tolerance are some of the major desirable properties for nuclear waste‐form materials. By using multiple lanthanides the average lanthanide radius can be controlled and consequently the structure, along with properties such as radiation tolerance. The radiation tolerance was assessed using in situ 1 MeV krypton irradiation and transmission electron microscopy characterization. Those materials for which cubic symmetry was achieved displayed better radiation tolerance; a greater critical fluence of ions ( F c ) was required for the crystalline to amorphous transition, and a lower temperature was required to maintain crystallinity ( T c ) during irradiation.

Aughterson, Robert D.↗

Single-Site Metal Organic Complexes on Oxide Supports for Selective Alkane Functionalization

High levels of reaction selectivity for heterogeneous catalysis are generally difficult to achieve with traditional metal nanoparticle catalysts, due to the variety of metal binding sites available. In this project, we have developed a metal-ligand coordination strategy to form transition metal single-sites on high surface area supports as heterogeneous single-site catalysts. Metal centers can be atomically dispersed in the binding pockets of organic ligands on oxide supports. The systems have to be carefully designed so that tendencies for metal cluster formation or binding to surface defect sites are overcome by the attractive coordination environment provided by the organic ligand. This was confirmed by a comprehensive set of characterization methods, including XAS, XPS, XRD, TEM, and CO adsorption. Design and tuning of metal-support and support-ligand interactions were crucial for high structural uniformity. We demonstrate that supported metal-ligand SSCs are effective, recyclable catalysts for alkene hydrosilylation reactions. Compared with commercial homogeneous catalysts, they exhibit improved yield and selectivity, less metal aggregation and side reactions, and stronger tolerance with functionalized substrates. These results give some preliminary indication that coordination with organic ligands can improve activity and selectivity in metal/oxide heterogeneous catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗