Search NASA⌕ Search

SEARCH · Search NASA

Results for “nanometers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Advancing the Physics of Magnetized Dusty Plasmas (Collaborative Research Final Report)

Dusty (or complex) plasmas are four-component systems consisting of the usual plasma constituents of electrons, ions, and neutral atoms with the addition of a third charged component - nanometer to micrometer sized solid particulates; i.e., "dust". The study of magnetized dusty plasmas is grounded in important questions that are relevant to space, astrophysical, and also technological plasmas and therefore have the potential to make a societal impact. The formation and control of nanometer-sized particles in industrial plasma processes is currently being exploited as a technique to induce the formation of nanocrystals on material surfaces. For example, when combined with magnetron sources, these are important processes that could lead to improved techniques for customizing material synthesis. The interaction between the edge plasma and walls of magnetic confinement fusion devices is a source of particulate material that can be transported throughout the plasma with potentially detrimental effects on plasma performance. Understanding the formation, transport, and destruction of these "dust" particles is of critical importance.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Imaging Intact Filamentous Fungi from Spore to Hyphal Tip on the Nanoscale

Previously, the Pacific Northwest National Laboratory was limited by a 3-order of magnitude gap in resolution for direct 2-D and 3-D imaging of chemical, biological, energy and materials science systems. Our imaging instrumentation could directly visualize 3-D ultrastructure without labeling at resolutions less than 10-nanometers or greater than 10-micrometers. To address this gap, we procured and commissioned a Sigray NanoFast Bio-Lambda laboratory-based x-ray nanotomography system. This equipment provides the capability to image through tens of micrometers of organic materials at down to 35-nanometer resolution to bridge the nanoscale to the mesoscale for biological systems, organic polymers, environmental and particulate samples.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Development of mesopores in superfine grain graphite neutron-irradiated at high fluence

Microstructural changes induced by neutron irradiation of superfine grain graphite G347A (Tokai Carbon, Japan) were examined by nitrogen adsorption at 77K and by three microscopy techniques (SEM, TEM and FIB-SEM tomography). The specimens were irradiated at doses of up to 30 dpa, covering stages before and after the turnaround fluence at three temperatures (300, 450, 750 °C) of their irradiation envelope. The initial graphite densification at low fluences did not produce any detectable effect in the pore size range (<350 nm) measured by gas adsorption. However, graphite irradiated at high fluences, after turnaround, showed severe structural changes. At all three temperatures and high irradiation fluences, gas adsorption revealed significant increase of the volume of narrow mesopores (<5–20nm) and up to five times increase of BET surface area, both in linear relationship with the relative volume expansion. Analysis of microscopy images showed multiplication of fine macropores (>50 nm) at high irradiation fluences and more structural changes on multiple scales, from nanometers to microns. This work demonstrates the unique ability of gas adsorption techniques to analyze open pores with sizes between sub-nanometer and sub-micron in bulk nuclear graphite, with supporting microscopy results.

I. Contescu, Cristian↗
DOE OSTI2024

ARM Aerial Facility (AAF) Water-based Condensation Particle Counter

The condensation particle counter (CPC) measures sub-micron aerosol particle number concentration by condensing fluid onto particles and causing them to grow to sizes that are easily detectable by optical scattering. The condensing liquid is typically an alcohol (e.g., butanol) or water. Depending on the CPC type, typical CPC instruments can count particles with sizes that range from 3 to 3000 nanometers (ultrafine CPC) or from 10 to 3000 nanometers (fine CPC).

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1982

Analysis of ocean color scanner data from the Superflux III Experiment

The scanner collected data on October 15, 20, and 22, 1980. Single-channel gray-scale data products generated 5 minutes after the scanner were collected and showed details of the Chesapeake plume structure, suggesting that this quick-look capability could have potential use for experiments in real time. The Chesapeake Bay plume extended offshore about 5 nautical miles on October 15, and 7 nautical miles on October 20. Using the October 15 1980, data, a correlation coefficient of r = 0.889 was obtained between chlorophyll 'A' and the ratio of band 7 (664-684 nanometers) to band 9 (746-766 nanometers). This ratio was then used to calculate the average surface chlorophyll 'A' concentration of the water flowing out of the Chesapeak Bay. A ratio from the Ocean Color Scanner bands was created to simulate the ratio that the Multichannel Ocean Color Sensor uses to calculate chlorophyll A concentrations. Using the October 15, 1980, data set, this ratio has a correlation coefficient of r = -0.739 with the log of the chlorophyll 'A' and the ratio of band 2 minus band 4 to band 2 plus band 4 of the Ocean Color Scanner. No correlation is found between the Ocean Color Scanner data and total suspended solid measurements made on October 15, 1980.

Ohlhorst, C. W.↗
NASA NTRS1983

An imaging spectrometer experiment for the Shuttle

An imaging spectrometer experiment concept for earth remote sensing, developed as part of NASA's Multispectral Linear Array program, will map a series of test sites at high spatial and spectral resolution from the vantage point of the Shuttle payload bay. The instrument covers the spectral range from 0.4 to 2.5 micrometers with a sampling interval of 10 nanometers in the visible and near infrared (to 1.0 micrometer) and 20 nanometers in the short wavelength infrared (1.0 to 2.5 micrometers). Resolution corresponding to a ground instantaneous field of view (pixel size) of 30 meters is provided over a swath width of 12 kilometers. On-board data editing is utilized to select a subset of the data stream for transmission to the ground. The instrument utilizes silicon and mercury cadmium telluride area array detectors. Pointing mirrors are included to permit specific test sites to be imaged from the Shuttle orbit.

Wellman, J. B.↗
NASA NTRS1991

Five degree-of-freedom control of an ultra-precision magnetically-suspended linear bearing

The authors constructed a high precision linear bearing. A 10.7 kg platen measuring 125 mm by 125 mm by 350 mm is suspended and controlled in five degrees of freedom by seven electromagnets. The position of the platen is measured by five capacitive probes which have nanometer resolution. The suspension acts as a linear bearing, allowing linear travel of 50 mm in the sixth degree of freedom. In the laboratory, this bearing system has demonstrated position stability of 5 nm peak-to-peak. This is believed to be the highest position stability yet demonstrated in a magnetic suspension system. Performance at this level confirms that magnetic suspensions can address motion control requirements at the nanometer level. The experimental effort associated with this linear bearing system is described. Major topics are the development of models for the suspension, implementation of control algorithms, and measurement of the actual bearing performance. Suggestions for the future improvement of the bearing system are given.

Trumper, David L.↗
NASA NTRS1991

Moderate Resolution Imaging Spectrometer-Tilt (MODIS-T) baseline concept

There will be several state of the art spectrometers in operation on the NASA Polar Orbiting Platform (NPOP-1) as part of the Earth Observing System (EOS). The Moderate Resolution Imaging Spectrometer (MODIS) will consist of two imaging spectroradiometric instruments, one nadir viewing (MODIS-N) and the other tiltable (MODIS-T) for ocean observation and land bidirectional reflectance studies. The Moderate Resolution Imaging Spectrometer-Tilt (MODIS-T) instrument is presently being constructed for flight on the EOS. It is an imaging spectrometer utilizing a grating type, reflecting Schmidt optical design that must provide a 1.1 kilometer spatial resolution at nadir from a spacecraft altitude of 705 kilometers with a 1500 kilometer cross-track swath and a +/- 50 degree forward and aft tilt capability. The instrument is required to cover the wavelength range from 400 to 880 nanometers in approximately 15 nanometer steps with less than 2.3 percent instrument induced polarization. The absolute radiometric accuracy must be at least 5 percent over the full dynamic range of the instrument.

Magner, Thomas J.↗
NASA NTRS1992

Biological weighting function for the inhibition of phytoplankton photosynthesis by ultraviolet radiation

Severe reduction of stratospheric ozone over Antarctica has focused increasing concern on the biological effects of ultraviolet-B (UVB) radiation (280 to 320 nanometers). Measurements of photosynthesis from an experimental system, in which phytoplankton are exposed to a broad range of irradiance treatments, are fit to an analytical model to provide the spectral biological weighting function that can be used to predict the short-term effects of ozone depletion on aquatic photosynthesis. Results show that UVA (320 to 400 nanometers) significantly inhibits the photosynthesis of a marine diatom and a dinoflagellate, and that the effects of UVB are even more severe. Application of the model suggests that the Antarctic ozone hole might reduce near-surface photosynthesis by 12 to 15 percent, but less so at depth. The experimental system makes possible routine estimation of spectral weightings for natural phytoplankton.

Cullen, John J.↗
NASA NTRS1993

The drift of Saturn's north polar spot observed by the Hubble Space Telescope

Polar projections of 50 images of Saturn at 889 nanometers and 25 images at 718 nanometers taken by the HST in November 1990, as well as three images at each wavelength taken in June 1991, have been examined. Among them, 31 show the north polar spot, which is associated with Saturn's polar hexagon, in locations suitable for measurement. The movement of the spot with respect to Saturn's system III rotation rate was studied. During the period of observation, the polar spot had first a short-term westward movement and then a long-term eastward drift. The rate of the long-term drift was -0.060 +/- 0.008 deg/day with respect to system III, approximately 50 percent greater than previously determined from Voyager. The original 1980 and 1981 Voyager data were combined with the new Hubble images to form an 11-yr baseline. The eastward drift over the longer period was -0.0569 degrees per day. The long-term drift could be due to uncertainty in the standard value of the internal rotation period. The short-term movement in November 1990 has a rate that is greater in magnitude but opposite in sign and probably represents a real, transient motion of the spot relative to the internal rotation system.

Caldwell, John↗
NASA NTRS1993

Unequilibrated, equilibrated, and reduced aggregates in anhydrous interplanetary dust particles

Track-rich anhydrous IDP's are probably the most primitive IDP's because they have escaped significant post-accretional alteration; they exhibit evidence of (nebular) gas phase reactions; their mineralogy is similar to comet Halley's dust; and some of them exhibit comet-like IR spectral characteristics. However, basic questions about the mineralogy and petrography of anhydrous IDP's remain unanswered, because they contain aggregated components that can be heterogeneous on a scale of nanometers. In some IDP's, aggregates account for greater than 75 percent of the volume of the particle. The aggregates have been systematically examined using an analytical electron microscope (AEM), which provides probe-forming optics and (x-ray and electron) spectrometers necessary to analyze individual nanometer-sized grains. The AEM results reveal at least three mineralogically distinct classes of aggregates in an hydrous IDP's, with mineralogies reflecting significantly different formation/aggregation environments.

Bradley, J. P.↗
NASA NTRS1994

Materials for efficient high-flux magnetic bearing actuators

Magnetic bearings have demonstrated the capability for achieving positioning accuracies at the nanometer level in precision motion control stages. This makes possible the positioning of a wafer in six degrees of freedom with the precision necessary for photolithography. To control the position of an object at the nanometer level, a model of the magnetic bearing actuator force-current-airgap relationship must be accurately obtained. Additionally, to reduce thermal effects the design of the actuator should be optimized to achieve maximum power efficiency and flux density. Optimization of the actuator is accomplished by proper pole face sizing and utilizing a magnetic core material which can be magnetized to the highest flux density with low magnetic loss properties. This paper describes the construction of a magnetic bearing calibration fixture designed for experimental measurement of the actuator force characteristics. The results of a material study that review the force properties of nickel-steel, silicon-steel, and cobalt-vanadium-iron, as they apply to magnetic bearing applications are also presented.

Williams, M. E.↗
NASA NTRS1994

NiAl-base composite containing high volume fraction of AlN for advanced engines

A particulate reinforced NiAl-AlN composite alloy has a NiAl matrix and greater than about 13 volume percent fine particles of AlN within the matrix. The particles preferably have a diameter from about 15 nanometers to about 50 nanometers. The particulate reinforced NiAl-AlN composite alloy may be prepared by cryomilling prealloyed NiAl in liquid nitrogen using grinding media having a diameter of from about 2 to 6 mm at an impeller speed of from about 450 RPM to about 800 RPM. The cryomilling may be done for a duration of from about 4 hours to about 20 hours to obtain a cryomilled powder. The cryomilled powder may be consolidated to form the particulate reinforced NiAl-AlN composite alloy. The particulate reinforced alloy can further include a toughening alloy. The toughening alloy may include NiCrAlY, FeCrAlY, and FeAl.

Hebsur, Mohan↗
NASA NTRS1995

Spectroscopic ellipsometry as a sensitive monitor of materials contamination

Spectroscopic ellipsometry is demonstrated to be extremely sensitive to contamination layers in the thickness range from 0.1 nm to 10 microns. In the present experiments we deposit either a thin lubricating oil (WD-40) or mineral oil continuously onto Ir, Cu, Al, Au, and V substrates from a bubbler, and monitor its thickness growth from sub-nanometer to tens of nanometers as a function of time. Re-evaporation of contaminant oils is also monitored in real-time by ellipsometry.

Hale, Jeffrey S.↗
NASA NTRS1995

Observation of Shoemaker-Levy Impacts by the Galileo Photopolarimeter Radiometer

The Galileo Photopolarimeter Radiometer experiment made direct photometric observations at 678 and 945 nanometers of several comet Shoemaker-Levy 9 fragments impacting with Jupiter. Initial flashes occurred at (fragment G) 18 July 1994 07:33:32, (H) 18 July 19:31:58, (L) 19 July 22:16:48, and (Q1) 20 July 20:13:52, equivalent Universal Time Coordinated (UTC) observed at Earth, with relative peak 945-nanometer brightnesses of 0.87, 0.67, 1.00, and 0.42, respectively. The light curves show a 2-second to maximum, a 10-second plateau, and an accelerating falloff. The Ql event, observed at both wavelengths, yielded a color temperature of more than 1 0,000 kelvin at its peak.

Martin, Terry Z.↗
NASA NTRS1999

Computational Study of Field Initiated Surface Reactions for Synthesis of Diamond and Silicon

This project involves using quantum chemistry to simulate surface chemical reactions in the presence of an electric field for nanofabrication of diamond and silicon. A field delivered by a scanning tunneling microscope (STM) to a nanometer scale region of a surface affects chemical reaction potential energy surfaces (PES) to direct atomic scale surface modification to fabricate sub-nanometer structures. Our original hypothesis is that the applied voltage polarizes the charge distribution of the valence electrons and that these distorted molecular orbitals can be manipulated with the STM so as to change the relative stabilities of the electronic configurations over the reaction coordinates and thus the topology of the PES and reaction kinetics. Our objective is to investigate the effect of applied bias on surface reactions and the extent to which STM delivered fields can be used to direct surface chemical reactions on an atomic scale on diamond and silicon. To analyze the fundamentals of field induced chemistry and to investigate the application of this technique for the fabrication of nanostructures, we have employed methods capable of accurately describing molecular electronic structure. The methods we employ are density functional theory (DFT) quantum chemical (QC) methods. To determine the effect of applied bias on surface reactions we have calculated the QC PESs in various applied external fields for various reaction steps for depositing or etching diamond and silicon. We have chosen reactions which are thought to play a role in etching and the chemical vapor deposition growth of Si and diamond. The PESs of the elementary reaction steps involved are then calculated under the applied fields, which we vary in magnitude and configuration. We pay special attention to the change in the reaction barriers, and transition state locations, and search for low energy reaction channels which were inaccessible without the applied bias.

Musgrave, Charles Bruce↗
NASA NTRS1998

SSBUV and NOAA-11 SBUV/2 Solar Variability Measurements

The Shuttle Solar Backscatter Ultraviolet (SSBUV) and NOAA-II Solar Backscatter Ultraviolet/2 (SBUV/2) instruments measured solar spectral Ultraviolet (UV) irradiance during the maximum and declining phase of solar cycle 22. The SSB UV data accurately represent the absolute solar UV irradiance between 200-405 nanometers, and also show the long-term variations during eight flights between October 1989 and January, 1996. These data have been used to correct long-term sensitivity changes in the NOAA-II SBUV/2 data, which provide a near-daily record of solar UV variations over the 170 to 400 nanometer region between December 1988 and October 1994. The NOAA-II data demonstrate the evolution of short-term solar UV activity during solar cycle 22.

Deland, Matthew T.↗
NASA NTRS2001

Protective Fullerene (C60) Packaging System for Microelectromechanical Systems Applications

The invention involves a method for locating the probe of a scanning tunneling micrograph a predetermined distance from its conducting surface, and specifically the deposition of a monolayer of fullerene C 60 onto the conducting plate. The Fullerene C 60 molecule is approximately spherical and a monolayer of fullerene has a thickness of one nanometer. By providing a monolayer of fullerene on the conducting surface and locating the probe on the surface of the monolayer, a distance of one nanometer can be established between the probe tip and the conducting surface.

John D Olivas↗