Search NASA⌕ Search

SEARCH · Search NASA

Results for “routing problems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Paths Forward for Nuclear Energy: Using a Nationwide Post-Stratified Hierarchical Model to Facilitate Matching of New Nuclear Technologies to Receptive Host Communities

This project was a collaboration between the University of Oklahoma (OU) and the University of Michigan (UMich). The overall objective of the project was to address a critical problem facing the siting of nuclear facilities, where there is no mechanism for incorporating public attitudes at a state and local level into decision-making. Utilizing recent advances in data modeling over local spatial scales, the research team created a state and county level map of public attitudes towards nuclear energy. Current estimates for public acceptance of nuclear technologies primarily exists on a national level, and sub-national estimates of public opinion about reactor siting, research facilities, transport routes, or storage and disposal facilities are very scarce. Model results from this project provide a systematic basis for technology developers to evaluate public acceptance across alternative siting options as a critical component for weighing potential benefit-cost tradeoffs for alternative paths to deploy new nuclear facilities. The project utilized data from the largest database of nuclear attitudes in the US, coupled with Census and elections-related data as well as data on social vulnerability and proximity to current nuclear facilities. In addition to modeling public support, the team also developed an interactive map to showcase results, using an online tool called Public and Local Attitudes about Nuclear Energy Technologies (PLANET). The tool allows technology developers and stakeholders to interact with the model results and better understand variation in support for nuclear facility siting on a state and county level. The interactive nature of the tool also allows users to analyze results in a targeted way, by comparing levels of support across different states and/or counties as desired.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Repair and Resource Scheduling in Unbalanced Distribution Systems Using Neighborhood Search

—This paper proposes an optimization strategy to assist utility operators to recover power distribution systems after large outages. Specifically, a mixed-integer linear programming (MILP) model is developed for co-optimizing crews, resources, and network operations. The MILP model coordinates damage isolation, network reconfiguration, distributed generator re-dispatch, and crew/resource logistics. In addition, a framework for integrating different types of photovoltaic (PV) systems in the restoration process is developed. We consider two different types of crews, namely, line crews for damage repair and tree crews for obstacle removal. We also model the repair resource logistic constraints. Furthermore, a new algorithm is developed for solving the distribution system repair and restoration problem (DSRRP). The algorithm starts by solving DSRRP using an assignmentbased method, then a neighborhood search method is designed to iteratively improve the solution. The proposed method is validated on modified IEEE 123- and 8500-bus distribution test systems.

Outage management↗

Pesticide use in banana and plantain production and risk perception among local actors in Talamanca, Costa Rica

The Talamanca County in Costa Rica has large-scale banana and small-scale plantain production, probably causing pesticide exposure in indigenous children. We explored to what extent different community actors are aware of children's pesticide hazards and how their awareness related to socio-economical and cultural conditions. Methods comprised eight focus groups with fathers and mothers separately, 27 semi-structured interviews to key actors, and field observations. As a whole, the indigenous plantain farmers and banana plantation workers had some general knowledge of pesticides concerning crop protection, but little on acute health effects, and hardly any on exposure routes and pathways, and chronic effects. People expressed vague ideas about pesticide risks. Inter-community differences were related to pesticide technologies used in banana and plantain production, employment status on a multinational plantation versus smallholder status, and gender. Compared to formalized practices on transnational company plantations, where workers reported to feel protected, pesticide handling by plantain smallholders was not perceived as hazardous and therefore no safety precautions were applied. Large-scale monoculture was perceived as one of the most important problems leading to pesticide risks in Talamanca on banana plantations, and also on neighboring small plantain farms extending into large areas. Plantain farmers have adopted use of highly toxic pesticides following banana production, but in conditions of extreme poverty. Aerial spraying in banana plantations was considered by most social actors a major determinant of exposure for the population living nearby these plantations, including vulnerable children. We observed violations of legally established aerial spraying distances. Economic considerations were most mentioned as the underlying reason for the pesticide use: economic needs to obtain the production quantity and quality, and pressure to use pesticides by other economic agents such as middlemen. Risk perceptions were modulated by factors such as people's tasks and positions in the production process, gender, and people's possibilities to define their own social conditions (more fatalistic perceptions among banana workers). The challenge for the future is to combine these insights into improved health risk assessment and management that is culturally adequate for each particular community and agricultural context. - Research highlights: {yields} A first study on pesticide risk perception in Costa Rica. {yields} One of the few studies performed in the indigenous populations in Talamanca. {yields} Economic considerations prevailed above health risks in both communities. {yields} Our findings provide valuable information for multiple social actors.

60 APPLIED LIFE SCIENCES↗

BCS-BEC crossover induced by a synthetic non-Abelian gauge field

We investigate the ground state of interacting spin-(1/2) fermions in three dimensions at a finite density ({rho}{approx}k{sub F}{sup 3}) in the presence of a uniform non-Abelian gauge field. The gauge-field configuration (GFC) described by a vector {lambda}{identical_to}({lambda}{sub x},{lambda}{sub y},{lambda}{sub z}), whose magnitude {lambda} determines the gauge coupling strength, generates a generalized Rashba spin-orbit interaction. For a weak attractive interaction in the singlet channel described by a small negative scattering length (k{sub F}|a{sub s}| < or approx. 1), the ground state in the absence of the gauge field ({lambda}=0) is a BCS (Bardeen-Cooper-Schrieffer) superfluid with large overlapping pairs. With increasing gauge-coupling strength, a non-Abelian gauge field engenders a crossover of this BCS ground state to a BEC (Bose-Einstein condensate) of bosons even with a weak attractive interaction that fails to produce a two-body bound state in free vacuum ({lambda}=0). For large gauge couplings ({lambda}/k{sub F}>>1), the BEC attained is a condensate of bosons whose properties are solely determined by the Rashba gauge field (and not by the scattering length so long as it is nonzero)--we call these bosons ''rashbons.'' In the absence of interactions (a{sub s}=0{sup -}), the shape of the Fermi surface of the system undergoes a topological transition at a critical gauge coupling {lambda}{sub T}. For high-symmetry GFCs we show that the crossover from the BCS superfluid to the rashbon BEC occurs in the regime of {lambda} near {lambda}{sub T}. In the context of cold atomic systems, these results make an interesting suggestion of obtaining BCS-BEC crossover through a route other than tuning the interaction between the fermions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Refueling infrastructure planning in intercity networks considering route choice and travel time delay for mixed fleet of electric and conventional vehicles

The range anxiety has been a major factor that affects the market acceptance of electric vehicles. Even with the recent development of battery technologies, a lack of charging stations and range anxiety are still significant concerns, specifically for intercity trips. This calls for more investments in building charging stations and advancing battery technologies to increase the market share of electric vehicles and improve sustainability. This study suggests a configuration for plug-in electric vehicle charging infrastructure to support long-distance intercity trips of electric vehicles at the network level. A model is proposed to minimize the total system cost including infrastructure investment (building charging stations/spots) and travel time delays (charging time, waiting time in the queue, and detour time to access charging stations). This study fills existing gaps in the literature by capturing realistic patterns of travel demand and considering flow-dependent charging delays at charging stations. Furthermore, the proposed model, which is formulated as a mixed-integer program with nonlinear constraints, solves the optimization problem at the network level. At the network level, impacts of charging station locations on the traffic assignment problem with a mixed fleet of electric and conventional vehicles need to be considered. To this end, a traffic assignment module is integrated with a simulated annealing algorithm. The numerical experiments show a satisfactory application of the model for a full-scale case study (intercity network in Michigan). The solution quality and efficiency of the proposed solution algorithm are evaluated against those of an enumeration approach for a small case study. The results suggest that even for the current market share and charging stations’ setting, a significant investment is needed to support intercity trips without range anxiety issues and with acceptable delays. Additionally, through sensitivity analyses, the required infrastructure and battery investments to support intercity trips with acceptable delays are established for hypothetical increased market shares and battery size in the future.

42 ENGINEERING↗

On Deployment of Multiple Base Stations for Energy-Efficient Communication in Wireless Sensor Networks

Data transmission from sensor nodes to a base station or a sink node often incurs significant energy consumption, which critically affects network lifetime. We generalize and solve the problem of deploying multiple base stations to maximize network lifetime in terms of two different metrics under one-hop and multihop communication models. In the one-hop communication model, the sensors far away from base stations always deplete their energy much faster than others. We propose an optimal solution and a heuristic approach based on the minimal enclosing circle algorithm to deploy a base station at the geometric center of each cluster. In the multihop communication model, both base station location and data routing mechanism need to be considered in maximizing network lifetime. We propose an iterative algorithm based on rigorous mathematical derivations and use linear programming to compute the optimal routing paths for data transmission. Simulation results show the distinguished performance of the proposed deployment algorithms in maximizing network lifetime.

Lin, Yunyue↗

Optimal mass evacuation planning for electric vehicles before natural disasters

The electric vehicle (EV) market has significantly expanded because EVs have lower operational costs while leaving less environmental footprint than internal combustion engine vehicles. However, EVs also come with drawbacks, including long charging time and short operational ranges. With these drawbacks and limited charging facilities, efficient long-distance EV evacuation management is challenging and has not been properly addressed. Without an efficient evacuation plan, serious congestion could happen at charging facilities, the evacuation process would be excessively long, and thus human lives may be put at risk. This study is motivated to investigate the optimal mass evacuation planning for EVs considering limited charging facilities. A three-stage method is proposed to efficiently approach this problem. A case study of Florida hurricane evacuation is conducted. Here, the method's effectiveness is verified by comparing it with a benchmark. Management insights and policy indications are drawn through sensitivity analysis of key parameters.

33 ADVANCED PROPULSION SYSTEMS↗

Microfabricated Devices and Ion Trapping Capabilities

Next generation ion traps will likely need to support tens if not hundreds of ions in order to achieve several logical qubits. As we scale to those sizes, the same problems we face now – rf dissipation, control I/O, and optical access – will only grow and become more complicated. While many of these challenges can potentially be solved with technology integration, independently researching the feasibility of that integration and other solutions may help reduce the time and risk in scaling up to larger traps, by testing on smaller less complex devices. We should also consider other fabrication techniques that may help scale to larger devices, such as: through-substrate-vias (TSVs), different metal coatings, exotic rf routing, on chip laser sources, or even a secondary macroscopic trap to reload ions from. To have these technologies ready for full scale integration when we need them, ion traps with some of these capabilities need to be produced now. Developing the rigorous fabrication methods for producing reliable traps takes time and experimentation. We propose developing larger ion traps and reliable integrated technology in conjunction to make both available faster.

36 MATERIALS SCIENCE↗

Incoherent control in a non-Hermitian Bose-Hubbard dimer

We investigate the combined effect of the particle-particle interaction and non-Hermiticity on the quantum states and energy spectra for a non-Hermitian Bose-Hubbard dimer with complex coupling constant. It is analytically and numerically found that a real energy appears uniquely when a balance between the interaction strength and non-Hermiticity is established. The corresponding quantum state is a stationary state which does not decay in time evolution. The result provides a route for enhancing survival probability of an open many-body system and for incoherently controlling quantum transition between the stationary states by modulating the interaction strength to fit the different balance conditions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fermionic Collective Excitations in a Lattice Gas of Rydberg Atoms

We investigate the many-body quantum states of a laser-driven gas of Rydberg atoms confined to a large spacing ring lattice. If the laser driving is much stronger than the van der Waals interaction among the Rydberg atoms, these many-body states are collective fermionic excitations. The first excited state is a spin wave that extends over the entire lattice. We demonstrate that our system permits us to study fermions in the presence of disorder although no external atomic motion takes place. We analyze how this disorder influences the excitation properties of the fermionic states. Our work shows a route towards the creation of complex many-particle states with atoms in lattices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Using Map Service API for Driving Cycle Detection for Wearable GPS Data: Preprint

Following advancements in smartphone and portable global positioning system (GPS) data collection, wearable GPS data have realized extensive use in transportation surveys and studies. The task of detecting driving cycles (driving or car-mode trajectory segments) from wearable GPS data has been the subject of much research. Specifically, distinguishing driving cycles from other motorized trips (such as taking a bus) is the main research problem in this paper. Many mode detection methods only focus on raw GPS speed data while some studies apply additional information, such as geographic information system (GIS) data, to obtain better detection performance. Procuring and maintaining dedicated road GIS data are costly and not trivial, whereas the technical maturity and broad use of map service application program interface (API) queries offers opportunities for mode detection tasks. The proposed driving cycle detection method takes advantage of map service APIs to obtain high-quality car-mode API route information and uses a trajectory segmentation algorithm to find the best-matched API route. The car-mode API route data combined with the actual route information, including the actual mode information, are used to train a logistic regression machine learning model, which estimates car modes and non-car modes with probability rates. The experimental results show promise for the proposed method's ability to detect vehicle mode accurately.

33 ADVANCED PROPULSION SYSTEMS↗

Nonvolatile memory behavior of nanocrystalline cellulose/graphene oxide composite films

With the continuous advance of modern electronics, the demand for nonvolatile memory cells rapidly grows. In order to develop post-silicon electronic devices, it is necessary to find innovative solutions to the eco-sustainability problem of materials for nonvolatile memory cells. In this work, we realized a resistive memory device based on graphene oxide (GO) and GO/cellulose nanocrystals (CNC) thin films. Aqueous solutions of GO and GO with CNC have been prepared and drop cast between two metal electrodes. Such thin-film based devices showed a transition between low and high conductivity states upon the forward and backward sweeping of an external electric field. This reversible current density transition behavior demonstrates a typical memory characteristic. The obtained results open an easy route for electronic information storage based on the integration of nanocrystalline cellulose onto graphene based devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

CHARACTERIZING AND CONTROLLING RECOVERY AND RECRYSTALLIZATION IN NIOBIUM FOR IMPROVED SRF CAVITY PERFORMANCE

Crystal defects, such as dislocations and low-angle boundaries, provide sources of magnetic flux trapping in the Nb materials used for superconducting radio frequency (SRF) resonating cavities. Improving the performance of SRF cavities, as measured through the quality factor, requires reducing these defects. SRF cavity production involves deformation processing, such as rolling and forming, and strategic annealing heat treatments. The resulting microstructures can be recovered, recrystallized, or both. Because recovery leaves many defects that can trap flux, recrystallization should improve cavity performance. Thus, processing schedules that produce complete recrystallization without excessive grain growth need to be designed. Solutions to this problem require understanding physical metallurgy and differentiating between recovered and recrystallized regions of microstructure. Backscattered electron microscopy techniques are applied to this end. We demonstrate that the conditions required to produce fully recrystallized microstructures depend on Nb impurity content, suggesting that processing schedules may need to be adjusted by material heat or lot. We also demonstrate that processing can be used to control growth of recrystallized grains to maintain mechanical strength in fully recrystallized materials. Forming cavities from cold-rolled Nb sheet material may provide strategic new routes to obtain microstructures that improve SRF cavity performance.

Taleff, E. [The University of Texas at Austin]↗

Early Career Paths at Los Alamos National Laboratory

We represent a selection of early career staff at LANL with backgrounds in mathematics. There are many possible paths to a position at LANL. The lab has very active graduate research and postdoctoral programs, and it is not uncommon for graduate students to become postdocs, who can then be “converted” to staff. Conversion from being a postdoc is not the only route to a position at LANL, nor is it a guarantee, but most of us did postdocs here before becoming staff. Being a postdoc here also gives you an idea of whether you’d like living in northern New Mexico, a rugged, beautiful, and somewhat remote area. It is important to say here that citizenship is not a requirement for many of the positions at the lab. The lab historically and currently welcomes investigators from all over the world. LANL offers a broad spectrum of mathematical challenges that are largely problem driven. Particularly to those who feel that academic mathematics can be stove-piped, with a focus on deep but not necessarily broad expertise, the LANL environment gives the flexibility to move and grow in many different directions. The lab encourages a team-based approach to problems, which not only enhances the breadth of our approach to solving problems, but also gives team members access to new fields. From the outside (academia), however, it can be difficult to see how fields map between academia and the lab. This is one of the reasons that having interaction with the lab as a graduate student or postdoc can be helpful in understanding if the environment would be a good match for you. An important advantage of working at the lab is our high visibility both in academia, as well as in industry and the government. Because of its mission-driven projects, LANL, and more broadly the Department of Energy Laboratories, help set research directions that are picked up by researchers in academia. For this reason, many lab staff have worked at LANL for a number of years, then have transferred into academia after having set the agenda for their field of expertise. Below, we will share some of our experiences, opinions, and reflections in order to give the reader a feel for our own early career experiences.

97 MATHEMATICS AND COMPUTING↗

Process development and techno-economic analysis of a novel process for MeOH production from CO2 using solar-thermal energy.

Mitigating and overcoming environmental problems brought about by the current worldwide fossil fuel-based energy infrastructure requires the creation of innovative alternatives. In particular, such alternatives must actively contribute to the reduction of carbon emissions via carbon recycling and a shift to the use of renewable sources of energy. Carbon neutral transformation of biomass to liquid fuels is one of such alternatives, but it is limited by the inherently low energy efficiency of photosynthesis with regard to the net production of biomass. Researchers have thus been looking for alternative, energy-efficient chemical routes inspired in the biological transformation of solar power, CO2 and H2O into useful chemicals; specifically, liquid fuels. Methanol has been the focus of a fair number of publications for its versatility as a fuel, and its use as an intermediate chemical in the synthesis of many compounds. In some of these studies, (e.g. Joo et al., (2004), Mignard and Pritchard (2006), Galindo and Badr (2007)) CO2 and renewable H2 (e.g. electrolytic H2) are considered as the raw materials for the production of methanol and other liquid fuels. Several basic PFD diagrams have been proposed. One of the most promising is the so called CAMERE process (Joo et al., 1999 ). In this process, carbon dioxide and renewable hydrogen are fed to a first reactor and transformed according to: H2 + CO2 <=> H2O + CO Reverse Water Gas Shift (RWGS) After eliminating the produced water the resulting H2/CO2/CO mixture is then feed to a second reactor where it is converted to methanol according to: CO2 + 3.H2 <=> CH3OH + H2O Methanol Synthesis (MS) CO + H2O <=> CO2 + H2 Water Gas Shift (WGS) The approach here is to produce enough CO to eliminate, via WGS, the water produced by MS. This is beneficial since water has been proven to block active sites in the MS catalyst. In this work a different process alternative is presented: One that combines the CO2 recycling of the CAMERE process and the use of solar energy implicit in some of the biomass-based process, but in this case with the potential high energy efficiency of thermo-chemical transformations.

08 HYDROGEN↗

Isovalent Alloying and Heterovalent Substititution as Routes to Accelerate the Development and Optimization of Super-Efficient Halide Perovskite PV Solar Cells

Halide perovskites represent one of the fastest growing photovoltaic (PV) device technologies in the last decade, with research efficiencies among the highest confirmed. However, the research needed to advance tandem perovskite solar cells requires a specialized understanding base, but there is no such base for this young group of materials with the same depth as in semiconductor alloy research. Whereas IV-IV, II-V and II-VI semiconductors have a sophisticated science foundation refined over decades due of their use in electronics, lasers, LEDs and night vision applications, this is not yet the case for halide perovskites. At the same time, these materials behave rather differently than conventional semiconductors. Within the rapidly unfolding field of PV, the emerging halide-perovskite alloy research has largely been based on empiricism. Clearly, a concerted and comprehensive application to halide perovskite alloys of the modern quantum theory of solids brought us over the years a broad understanding of the critical factors enabling conventional inorganic PV could leapfrog the Edisonian, trial-and-error search for solutions to critical problems that are poorly understood. These theory approaches are required to accelerate the progress toward commercially ready hybrid-perovskites by providing a theory-guided experiment component to the EERE investments in this high-priority R&D. During this project we have studied three different rungs on the ladder of knowledge about hybrid perovskites. This kind of single halide perovskites represent the first level of development (rung 1) of solar cells, and includes materials such as APbI 3 , ASnI 3 , APbBr 3 , ASnBr 3 with different A cations, such as methylammonium (MA) with formamidinium (FM). Rung 2 is obtained by mixing B cations (Sn and Pb), and X anions (Cl and Br or I) producing a disordered alloy (A, A’)(M,M’)(X,X’) 3 -space. The most advanced rung corresponds to heterovalent-substitution of halide perovskites, creating an ordered double-perovskite compound. Although the focus of the project was on Rungs 2 and 3, we have made important discoveries regarding the nature of pure perovskites. We’ve observed that cubic perovskites should be modeled by a polymorphous network, instead of the basic single unit cell approach. This leads to the conclusion that perovskites have a fluid-like nature. An article regarding this work has been submitted to Nature Materials. Using the approach described above, we have also simulated alloys of halide perovskites, representing rung 2. We have focused on mixtures of [Cs,FA][Sn,Pb]I 3 with different concentrations, being able to disentangle the structural and electronic factors that determines the variation (bowing) of properties such as band gaps, mixing enthalpies and decomposition energies. For rung 3 compounds, we’ve closely interacted with experimental groups clarifying the chemical routes to obtain a certain compound, and what should be the most stable structure for them. As the final product, and consequent dissemination of the research, we’ve submitted two papers for publication, that are currently under evaluation. The interaction with experimental groups was also an important focus. We have participated in several local, national and international meetings, and reached out more closely to groups from CU Boulder and Arkansas.

14 SOLAR ENERGY↗

Endoglucanase Peripheral Loops Facilitate Complexation of Glucan Chains on Cellulose via Adaptive Coupling to the Emergent Substrate Structures

We examine how the catalytic domain of a glycoside hydrolase family 7 endoglucanase catalytic domain (Cel7B CD) facilitates complexation of cellulose chains from a crystal surface. With direct relevance to the science of biofuel production, this problem also represents a model system of biopolymer processing by proteins in Nature. Interactions of Cel7B CD with a cellulose microfibril along different paths of complexation are characterized by mapping the atomistic fluctuations recorded in free-energy simulations onto the parameters of a coarse-grain model. The resulting patterns of protein-biopolymer couplings also uncover the sequence signatures of the enzyme in peeling off glucan chains from the microfibril substrate. We show that the semiopen active site of Cel7B CD exhibits similar barriers and free energies of complexation over two distinct routes; namely, scooping of a chain into the active-site cleft and threading from the chain end into the channel. On the other hand, the complexation energetics strongly depends on the surface packing of the targeted chain and the resulting interaction sites with the enzyme. A revealed principle is that Cel7B CD facilitates cellulose deconstruction via adaptive coupling to the emergent substrate. The flexible, peripheral segments of the protein outside of the active-site cleft are able to accommodate the varying features of cellulose along the simulated paths of complexation. The general strategy of linking physics-based molecular interactions to protein sequence could also be helpful in elucidating how other protein machines process biopolymers.

Environmental Molecular Sciences Laboratory↗