Search NASA⌕ Search

SEARCH · Search NASA

Results for “spectral responsivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

The molecular branching ratio method for calibration of optical systems in the vacuum ultraviolet

The intensity distribution of bands belonging to six molecular band systems is discussed with special emphasis on their usefulness for intensity calibration of optical systems in the vacuum ultraviolet (1000A Lambda 3000A). The theory of molecular band intensities is outlined and the technique of measuring the spectral response curve is described. Several methods for establishing an absolute intensity calibration are discussed.

Mumma, M. J.↗
NASA NTRS1971

A multispectral image sensor array.

A silicon monolithic multispectral photosensor device is described. Fabrication techniques and preliminary spectral response data are presented. The device is designed to meet small size and weight requirements and to impose a reduced load upon cooling systems in use on satellites.

Gerhard, G. C.↗
NASA NTRS1971

The silicon vidicon: Integration, storage and slow scan capability - Experimental observation of a secondary mode of operation.

Description of the performance of the silicon diode array vidicon - an imaging sensor which possesses wide spectral response, high quantum efficiency, and linear response. These characteristics, in addition to its inherent ruggedness, simplicity, and long-term stability and operating life make this device potentially of great usefulness for ground-base and spaceborne planetary and stellar imaging applications. However, integration and charged storage for periods greater than approximately five seconds are not possible at room temperature because of diode saturation from dark current buildup. Since dark current can be reduced by cooling, measurements were made in the range from -65 to 25 C. Results are presented on the extension of integration, storage, and slow scan capabilities achievable by cooling. Integration times in excess of 20 minutes were achieved at the lowest temperatures. The measured results are compared with results obtained with other types of sensors and the advantages of the silicon diode array vidicon for imaging applications are discussed.

Ando, K. J.↗
NASA NTRS1972

Excitation of the Werner bands of H2 by electron impact.

Absolute cross sections for the excitation of the Werner band system of molecular hydrogen have been measured from energy threshold to 300 eV for electron impact on molecular hydrogen. The bands were observed in emission in the wavelength region of 1100 to 1250 A. From a comparison of the measured cross sections with previously calculated transition probabilities, it is concluded that the Werner bands are suitable as the basis for relative spectral response calibration only when the bands are observed under sufficiently high resolution. The effect of the perturbation interaction between the B and C states of the hydrogen molecule was observed in the rotational intensity distribution of the Werner (3,7) and (3,6) bands.

Stone, E. J.↗
NASA NTRS1972

Utilization of ERTS-1 data in North Carolina

The author has identified the following significant results. Initial study and interpretation of ERTS-1 imagery indicates its usefulness for regional land use planning purposes in North Carolina. Quarries, many secondary roads, and the existence of urbanization as well as changes in urban areas may be mapped. Differences in spectral response for various parts of the major cities suggests that the type of activity in urbanized areas may be monitored. Geological mapping at a scale of 1:250,000 may be possible. The major unfavorable comment from various organizations and agencies who are potential users has been to the relatively small scale. The imagery is a powerful illustrative tool for the several state agencies cooperating in the investigation.

Welby, C. W.↗
NASA NTRS1973

Remote sensing in Iowa agriculture

The author has identified the following significant results. After receiving the ERTS-1 imagery, three methods of analysis of this imagery have been used. Observations noted are as follows: (1) Use of color additive and density slicing-color coding appears potentially useful for crop identification and automatic classification in Iowa for this time frame. The influence of soil association differences on the spectral response of the imagery will probably have to be taken into account for any automatic crop identification procedure to be successful. Small fields and the diversity of Iowa's cropping patterns also will cause significant problems for crop classifications. (2) The presence of high clouds and associated hazy atmospheric conditions markedly reduces the resolution of the ERTS-1 imagery. (3) Utilization of filtered 2 1/2 inch projectors is quite difficult because of multiple image registration problems. This procedure does, however, allow the interpreter to achieve image enlargement and the enhancement of response differences using two image projections.

Mahlstede, J. P.↗
NASA NTRS1972

Multispectral scanner system for ERTS: Four band scanner system. Volume 2: Engineering model panoramic pictures and engineering tests

This document is Volume 2 of three volumes of the Final Report for the four band Multispectral Scanner System (MSS). The results are contained of an analysis of pictures of actual outdoor scenes imaged by the engineering model MSS for spectral response, resolution, noise, and video correction. Also included are the results of engineering tests on the MSS for reflectance and saturation from clouds. Finally, two panoramic pictures of Yosemite National Park are provided.

Source record↗
NASA NTRS1972

Solid state image sensing arrays

The fabrication of a photodiode transistor image sensor array in silicon, and tests on individual elements of the array are described along with design for a scanning system for an image sensor array. The spectral response of p-n junctions was used as a technique for studying the optical-absorption edge in silicon. Heterojunction structures of Sb2S3- Si were fabricated and a system for measuring C-V curves on MOS structures was built.

Sadasiv, G.↗
NASA NTRS1973

Characteristics of cesium iodide for use as a particle discriminator for high energy cosmic rays

The possible use of CsI to discriminate between high energy cosmic ray electrons and interacting protons has been investigated. The pulse-shape properties as a function of ionization density, temperature, and spectral response are presented for thallium-activated CsI and as a function of ionization density for sodium-activated CsI. The results are based on previously published data and on corroborative measurements from the present work. Experimental results on the response of CsI to electron-induced electromagnetic cascades and to interacting hadrons are described. Bibliographies of publications dealing with the properties of CsI and with pulse-shape discrimination techniques are presented.

Crannell, C. J.↗
NASA NTRS1972

A solid state multispectral imager.

Photodiode arrays used as image sensors in satellite remote imaging systems offer the advantages of geometric accuracy, precise registration of scene elements, enhanced operational reliability, and wide spectral response. Principles of photodiode-array operation are reviewed, and the latest developments in self-scanned array chip technology are described along with optical system requirements for multispectral coverage. Results of development efforts with a spaceborne solid-state multispectral camera based on linear sensing array technology are outlined to demonstrate the capabilities of this approach to multispectral sensing.

Green, A.↗
NASA NTRS1973

Use of thin film light detector

A photovoltaic cell device with a trapezoidal barrier is described. An aluminum, magnesium, or tantalum base is vapor deposited on a quartz substrate. An oxide or nitride film of the base metal is produced as an insulator by reaction in a glow discharge plasma to a thickness of less than 100 Angstroms. A metal, preferably gold, conter-electrode is vapor deposited on the insulating layer. A bias generator of high impedance is used to set and shift or modulate the spectral response of the device.

Lewicki, G. W.↗
NASA NTRS1973

A radiation model for calculating atmospheric corrections to remotely sensed infrared measurements, version 2

A numerical model is developed which calculates the atmospheric corrections to infrared radiometric measurements due to absorption and emission by water vapor, carbon dioxide, and ozone. The corrections due to aerosols are not accounted for. The transmissions functions for water vapor, carbon dioxide, and water are given. The model requires as input the vertical distribution of temperature and water vapor as determined by a standard radiosonde. The vertical distribution of carbon dioxide is assumed to be constant. The vertical distribution of ozone is an average of observed values. The model also requires as input the spectral response function of the radiometer and the nadir angle at which the measurements were made. A listing of the FORTRAN program is given with details for its use and examples of input and output listings. Calculations for four model atmospheres are presented.

Boudreau, R. D.↗
NASA NTRS1974

Optical properties of thin gold films applied to Schottky barrier solar cells

The Schottky barrier solar cell is considered a possible candidate for converting solar to electrical energy both for space and terrestrial applications. Knowledge of the optical constants of the ultrathin metal film used in the cell is essential for analyzing and designing higher efficiency Schottky barrier cells. The optical constants of 7.5 -nm (75-A) gold films on gallium arsenide have been obtained. In addition, the absolute collection efficiency of Schottky barrier solar cells has been determined from measured spectral response and optical constants of the gold film.

YEH Y. M.↗
NASA NTRS1973

Analysis of multi-layered films

Dye densities of multi-layered films are determined by applying a regression analysis to the spectral response of the composite transparency. The amount of dye in each layer is determined by fitting the sum of the individual dye layer densities to the measured dye densities. From this, dye content constants are calculated. Methods of calculating equivalent exposures are discussed. Equivalent exposures are a constant amount of energy over a limited band-width that will give the same dye content constants as the real incident energy. Methods of using these equivalent exposures for analysis of photographic data are presented.

Scarpace, F. L.↗
NASA NTRS1973

Radar spectral measurements of vegetation

Spectral data of 4-8 GHz radar backscatter were gathered during the 1972 growing season at look angles between 0 and 70 deg and for all four possible polarization linear combinations. The data covers four crop types (corn, milo, alfalfa, and soybeans) and a wide range of soil moisture content. To insure statistical representation of the results, measurements were conducted over 128 fields corresponding to a total of about 40,000 data points. The use of spectral response signatures to separate different crop types and to separate healthy corn from blighted corn was investigated.

Ulaby, F. T.↗
NASA NTRS1973

Application of Fourier analysis to multispectral/spatial recognition

One approach for investigating spectral response from materials is to consider spatial features of the response. This might be accomplished by considering the Fourier spectrum of the spatial response. The Fourier Transform may be used in a one-dimensional to multidimensional analysis of more than one channel of data. The two-dimensional transform represents the Fraunhofer diffraction pattern of the image in optics and has certain invariant features. Physically the diffraction pattern contains spatial features which are possibly unique to a given configuration or classification type. Different sampling strategies may be used to either enhance geometrical differences or extract additional features.

Hornung, R. J.↗
NASA NTRS1974

Radar measurement of soil moisture content

The effect of soil moisture on the radar backscattering coefficient was investigated by measuring the 4- to 8-GHz spectral response from two types of bare-soil fields: slightly rough and very rough, in terms of the wavelength. An FM-CW radar system mounted atop a 75-ft truck-mounted boom was used to measure the return at ten frequency points across the 4- to 8-GHz band, at eight different look angles (0 through 70 deg), and for all polarization combinations. A total of 17 sets of data were collected covering the range from 4 to 36% soil moisture content by weight. The results indicate that the radar response to soil moisture content is highly dependent on the surface roughness, microwave frequency, and look angle. The response seems to be linear, however, over the range from 15 to 30% moisture content for all angles, frequencies, polarizations and surface conditions.

Ulaby, F. T.↗
NASA NTRS1974

Absolute line strengths for carbon and sulfur

Work has been conducted to reduce substantially uncertainties concerning the line strengths for carbon and sulfur. Two or more independent methods were used to measure thermodynamic variables and to calibrate detectors for absolute sensitivity and spectral response. The absolute transition probabilities of 124 visible and infrared lines of C I, S I, and S II were measured in a consistent way.

Miller, M. H.↗