Search NASA⌕ Search

SEARCH · Search NASA

Results for “strain engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Development of a high temperature thin film static strain gage

The objective is to develop a new thin film resistance strain gage system which will be suitable for use inside gas turbine engines on blades or vanes at temperatures up to 1250 K. These gages are to be capable of making strain measurements to plus or minus 2000 microstrain with total errors of no more than plus or minus 10 percent during a 50 hour period. In addition to survival and stability in this hostile environment, attaining a low temperature coefficient of resistance, of the order of 20 ppm/K or less, is an important goal. This requirement arises from the presently unavoidable uncertainties in the measurement of exact temperatures inside gas turbine engines for use in making corrections for apparent strain.

Hulse, Charles O.↗
NASA NTRS1988

Biaxial experiments supporting the development of constitutive theories for advanced high-temperature materials

Complex states of stress and strain are introduced into components during service in engineering applications. It follows that analysis of such components requires material descriptions, or constitutive theories, which reflect the tensorial nature of stress and strain. For applications involving stress levels above yield, the situation is more complex in that material response is both nonlinear and history dependent. This has led to the development of viscoplastic constitutive theories which introduce time by expressing the flow and evolutionary equation in the form of time derivatives. Models were developed here which can be used to analyze high temperature components manufactured from advanced composite materials. In parallel with these studies, effort was directed at developing multiaxial testing techniques to verify the various theories. Recent progress in the development of constitutive theories from both the theoretical and experimental viewpoints are outlined. One important aspect is that material descriptions for advanced composite materials which can be implemented in general purpose finite element codes and used for practical design are verified.

Ellis, J. R.↗
DOE OSTI2025

Engineering the hyperthermophilic archaeon Pyrococcus furiosus for 1-propanol production

ABSTRACT Society relies heavily on chemicals traditionally produced through the refinement of fossil fuels. The conversion of renewable biomass to value-added chemicals by microbes, particularly hyperthermophiles (T opt ≥80°C), offers a renewable alternative to this traditional approach. Herein, we describe the engineering of the hyperthermophilic archaeon Pyrococcus furiosus , which grows optimally (T opt ) at 100°C, for the conversion of sugar to 1-propanol. This was accomplished by constructing a hybrid metabolic pathway consisting of two native and seven heterologously produced enzymes to convert acetyl-CoA from carbohydrate metabolism to 1-propanol. A total of eleven foreign genes from two other organisms were utilized, one from the thermophilic bacterium Thermoanaerobacter sp. strain X514 and 10 from the thermoacidophilic archaeon Metallosphaera sedula, both of which grow optimally near 70°C. The recombinant P. furiosus strain produced 1-propanol at similar concentrations (up to ~1 mM) when incubated at 75°C to activate the gene products of Thermoanaerobacter sp. strain X514 and M. sedula and by initially incubating at 95°C for P. furiosus growth and then subsequently returning to 75°C to promote 1-propanol formation. Note that 1-propanol was not produced if the culture was grown only at 95°C. This work has the potential for future optimization through harnessing the genome-scale metabolic model of P. furiosus that was used herein to identify engineering targets to increase 1-propanol titer. IMPORTANCE As petroleum reserves become increasingly strained, the development of renewable alternatives to traditional chemical synthesis becomes more important. In this work, a high-temperature biological system for sugar to 1-propanol conversion was demonstrated by metabolic engineering of the hyperthermophilic archaeon Pyrococcus furiosus (T opt 100°C). The engineered strain produced 1-propanol by temperature shifting from 75°C to 95°C and then back to 75°C to accommodate the temperature ranges for native and foreign proteins associated with 1-propanol biosynthesis. Genome-scale metabolic modeling informed the carbon and reductant flux in the system, identified potential factors limiting 1-propanol production, and revealed potential optimization targets.

O'Quinn, Hailey C. (ORCID:0009000274865755)↗
DOE OSTI2026

Biocatalytic Carboxylic Acid Reduction and Transamination in Cell‐Free Lysates at High Substrate Loading

Chemoselective reduction of stable carboxylic acids to reactive aldehydes is of interest across many industries. While carboxylic acid reductases (CARs) are promising biocatalysts for this chemistry, poor chemoselectivity and low yield are commonly obtained when using less expensive crude lysate preparations and prerequisite ATP and NADPH regeneration systems. Here, in this work, we developed a highly chemoselective multienzyme cascade featuring a CAR and an ω-transaminase (TA) in crude lysate format, with conversion of the dicarboxylic acid terephthalic acid (TPA) into the diamine para -xylylenediamine (pXDA) as the model chemistry. We improved chemoselectivity for pXDA using engineered aldehyde-stabilizing Escherichia coli strains, though desired product yields remained modest. We next found that CAR activity was limited at high substrate loadings and overcame this bottleneck by modulating the ratio of polyphosphate (polyP 6 ) to Mg 2+ , enabling volumetric scaling and increased substrate loading up to 50 mM TPA. We then showcased the portability of this platform across substrates, resulting in the synthesis of four other high-value amines from carboxylate precursors. The combination of high carboxyl group turnover, up to 93.5 mM under the tested conditions, and the simplicity of crude enzyme preparation is a promising platform for sustainable functional group interconversion.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Quantifying Growth of Three Common Bacterium on Phytic Acid: Investigating Effects of Media Composition

Microbes can produce a plethora of metabolites and enzymes that allow mobilization of various elements and nutrients in the soil, including phosphorus. Phosphorus is essential to plant growth; however, only a limited amount of it is in a bio-accessible inorganic form that can be utilized by most plants. Microbes can produce enzymes called phosphatase, which break down phytic acid (organic phosphorus) into bioavailable inorganic phosphate. My work aimed to understand how inorganic phosphate, phytic acid, and calcium in media affect the growth of Bacillus subtilis168 (B. subtilis), Escherichia coli K12 BW25113 (E. coli), Pseudomonas putida KT2440 (P. putida), and a strain of Pseudomonas putida AG5577_MS238 engineered to produce a phytase. Eight media were made to test how these components affect growth, and an additional two to understand the effects of multiple carbon sources versus one. It was observed that P. putida’s growth increased in the presence of phytic acid and was strongly driven by nitrate availability. Furthermore, it was able to initiate faster growth when multiple carbon sources were available rather than just one. E. coli’s growth seemed to be limited when inorganic phosphate was unavailable and little to no growth occurred when phytic acid, calcium, and inorganic phosphate were absent. B. subtilis was unable to substantially grow within 28 hrs in any of the mediums tested. The results of this research aid in understanding the growth responses of P. putida, E. coli, and B. subtilis on less accessible and bioavailable forms of phosphorus.

Black, Grace S.↗
DOE OSTI2026

Biohydrogen Generation from Un-Pretreated Spent Coffee Grounds with Clostridium Thermocellum

Coffee is among the world's most widely consumed beverages, generating 18 million wet tonnes of waste spent coffee grounds annually. Disposal of SCGs is complicated by their high moisture content, their recalcitrant chemical composition, and the presence of caffeine and other bioactive compounds. Dark fermentation is a promising technology for conversion of waste cellulosic biomass into renewable hydrogen, carbon dioxide, and volatile fatty acids. Typical SCGs have high moisture content, are pre-milled to fine particle sizes, and contain 8%-19% cellulose and up to 40% hemicellulose, making them an attractive feedstock for dark fermentation. In this study, we investigate biohydrogen production from unpretreated SCGs using Clostridium thermocellum strain KJC19-9, a cellulolytic bacterium engineered to co-utilize xylose, specifically examining the inhibitory effects of residual caffeine and high solids loadings on microbial growth and hydrogen production efficiency. While SCGs were initially resistant to both cell growth and biohydrogen production, a strategy to co-ferment with low concentrations of cellobiose dramatically enhanced process performance, reducing lag phase duration and enabling cellulosome production for efficient cellulose hydrolysis. This co-substrate approach generated up to 944 mL hydrogen per L reaction from 50 g/L of spent coffee grounds over 120 h (1.34 mol H2/mol carbohydrate), validating SCGs as a promising dark fermentation feedstock and underscoring the value of mixed substrate approaches in consolidated bioprocessing.

08 HYDROGEN↗
NASA NTRS1973

Improved hardening theory for cyclic plasticity.

A temperature-dependent version of a combined hardening theory, including isotropic and kinematic hardening, is presented within the framework of recent plasticity formulations. This theory has been found to be especially useful in finite-element analysis of aerospace vehicle engines under conditions of large plastic strain and low-cycle fatigue.

Vos, R. G.↗
NASA NTRS1979

Effect of thermally induced porosity on an as-HIP powder metallurgy superalloy

The impact of thermally induced porosity on the mechanical properties of an as-hot-isostatically-pressed and heat treated pressing made from low carbon Astroloy was determined. Porosity in the disk-shape pressing studied ranged from 2.6 percent at the bore to 1.4 percent at the rim. Tensile, yield strength, ductility, and rupture life of the rim of the porous pressing was only slightly inferior to the rim of sound pressings. The strength, ductility, and rupture life of the bore of the porous pressing was severely degraded compared to sound pressings. At strain ranges typical of commercial jet engine designs, the rim of the porous pressing had slightly inferior fatigue life to sound pressings.

Dreshfield, R. L.↗
NASA NTRS1980

Effects of thermally induced porosity on an as-HIP powder metallurgy superalloy

The effect of thermally induced porosity on the mechanical properties of an as-hot-isostatically pressed and heat-treated pressing made from low carbon Astroloy is examined. Tensile, stress-rupture, creep, and low cycle fatigue tests were performed and the results were compared with industrial acceptance criteria. It is shown that the porous pressing has a porosity gradient from the rim to the bore with the bore having 1-1/2% greater porosity. Mechanical properties of the test ring below acceptance level are tensile reduction in area at room temperature and 538 C and time for 0.1% creep at 704 C. It is also found that the strength, ductility, and rupture life of the rim are slightly inferior to those of the rim of the sound pressings, while those of the bore are generally below the acceptable level. At strain ranges typical of commercial aircraft engines, the low cycle fatigue life of the rim of the porous pressings is slightly lower than that of the sound pressings.

Dreshfield, R. L.↗
NASA NTRS1982

Turbine heat transfer

Objectives and approaches to research in turbine heat transfer are discussed. Generally, improvements in the method of determining the hot gas flow through the turbine passage is one area of concern, as is the cooling air flow inside the airfoil, and the methods of predicting the heat transfer rates on the hot gas side and on the coolant side of the airfoil. More specific areas of research are: (1) local hot gas recovery temperatures along the airfoil surfaces; (2) local airfoil wall temperature; (3) local hot gas side heat transfer coefficients on the airfoil surfaces; (4) local coolant side heat transfer coefficients inside the airfoils; (5) local hot gas flow velocities and secondary flows at real engine conditions; and (6) local delta strain range of the airfoil walls.

Rohde, J. E.↗
NASA NTRS1988

Thermal-structural analyses of Space Shuttle Main Engine (SSME) hot section components

Three dimensional nonlinear finite element heat transfer and structural analyses were performed for the first stage high pressure fuel turbopump (HPFTP) blade of the space shuttle main engine (SSME). Directionally solidified (DS) MAR-M 246 and single crystal (SC) PWA-1480 material properties were used for the analyses. Analytical conditions were based on a typical test stand engine cycle. Blade temperature and stress strain histories were calculated by using the MARC finite element computer code. The structural response of an SSME turbine blade was assessed and a greater understanding of blade damage mechanisms, convective cooling effects, and thermal mechanical effects was gained.

Abdul-Aziz, Ali↗
NASA NTRS1992

Optimal control computer programs

The solution of the optimal control problem, even with low order dynamical systems, can usually strain the analytical ability of most engineers. The understanding of this subject matter, therefore, would be greatly enhanced if a software package existed that could simulate simple generic problems. Surprisingly, despite a great abundance of commercially available control software, few, if any, address the part of optimal control in its most generic form. The purpose of this paper is, therefore, to present a simple computer program that will perform simulations of optimal control problems that arise from the first necessary condition and the Pontryagin's maximum principle.

Kuo, F.↗
NASA NTRS1995

Development of practical high temperature superconducting wire for electric power application

The technology of high temperature superconductivity has gone from beyond mere scientific curiousity into the manufacturing environment. Single lengths of multifilamentary wire are now produced that are over 200 meters long and that carry over 13 amperes at 77 K. Short-sample critical current densities approach 5 x 104 A/sq cm at 77 K. Conductor requirements such as high critical current density in a magnetic field, strain-tolerant sheathing materials, and other engineering properties are addressed. A new process for fabricating round BSCCO-2212 wire has produced wires with critical current densities as high as 165,000 A/sq cm at 4.2 K and 53,000 A/sq cm at 40 K. This process eliminates the costly, multiple pressing and rolling steps that are commonly used to develop texture in the wires. New multifilamentary wires with strengthened sheathing materials have shown improved yield strengths up to a factor of five better than those made with pure silver. Many electric power devices require the wire to be formed into coils for production of strong magnetic fields. Requirements for coils and magnets for electric power applications are described.

Hawsey, Robert A.↗
NASA NTRS1999

STS-96 Mission Highlights

In this second part of a three-part video mission-highlights set, on-orbit spacecrew activities performed on the STS-96 Space Shuttle Orbiter Discovery and the International Space Station are reviewed. The flight crew consists of Kent V. Rominger, Commander; Rick D. Husband, Pilot; and Mission Specialists Ellen Ochoa, Tamara E. Jernigan, Daniel T. Barry, Julie Payette (Canadian), and Valery Ivanovich Tokarev (Russian). The primary goals of this mission were to work on logistics and resupply the International Space Station. This second part in the mission series features video from Flight Day 4-7 (FD 4-7). FD 4 of STS-96 presents astronauts Tammy Jernigan and Dan Barry completing the second longest space walk in shuttle history. Footage includes Jernigan and Barry transferring and installing two cranes from the shuttle's payload bay to locations on the outside of the station. The astronauts enter the International Space Station delivering supplies and prepare the outpost to receive its first resident crew, scheduled to arrive in early 2000 on FD 5. The video also captures the crew involved in logistics transfer activities within the Discovery/ISS orbiting complex. FD 6 includes footage of Valery Tokarev and Canadian astronaut Julie Payette charging out the final six battery recharge controller units for two of Zarya's power-producing batteries and all crew members' involvement in logistics transfer activities from the SPACEHAB module to designated locations in the International Space Station. With the transfer work of FD 6 all but complete, the astronauts conduct some additional work, installing parts of a wireless strain gauge system that will help engineers track the effects of adding modules to the station throughout its assembly. Moving the few remaining items from Discovery to the ISS, then closing a series of hatches within the station's modules leading back to the shuttle are the primary activities contained in FD 7. Final coverage features Discovery's astronauts finishing their work inside the International Space Station, closing all of the hatches and readying the shuttle's small thrusters to be fired to raise the entire complex's orbit in preparation for the undocking and departure set for FD 8.

Source record↗
NASA NTRS2010

Vibration Response Predictions for Heavy Panel Mounted Components from Panel Acreage Environment Specifications

The development of new launch vehicles in the Aerospace industry often relies on response measurements taken from previously developed vehicles during various stages of liftoff and ascent, and from wind tunnel models. These measurements include sound pressure levels, dynamic pressures in turbulent boundary layers and accelerations. Rigorous statistical scaling methods are applied to the data to derive new environments and estimate the performance of new skin panel structures. Scaling methods have proven to be reliable, particularly for designs similar to the vehicles used as the basis for scaling, and especially in regions of smooth acreage without exterior protuberances or heavy components mounted to the panel. To account for response attenuation of a panel-mounted component due to its apparent mass at higher frequencies, the vibroacoustics engineer often reduces the acreage vibration according to a weight ratio first suggested by Barrett. The accuracy of the reduction is reduced with increased weight of the panel-mounted component, and does not account for low-frequency amplification of the component/panel response as a system. A method is proposed that combines acreage vibration from scaling methods with finite element analysis to account for the frequency-dependent dynamics of heavy panel-mounted components. Since the acreage and mass-loaded skins respond to the same dynamic input pressure, such pressure may be eliminated in favor of a frequency-dependent scaling function applied to the acreage vibration to predict the mass-loaded panel response. The scaling function replaces the Barrett weight ratio, and contains all of the dynamic character of the loaded and unloaded skin panels. The solution simplifies for spatially uncorrelated and fully correlated input pressures. Since the prediction uses finite element models of the loaded and unloaded skins, a rich suite of response data are available to the design engineer, including interface forces, stress and strain, as well as acceleration and displacement. An extension of the method is also developed to incorporate the effect of a local protuberance near a heavy component. Acreage environments from traditional scaling methods with and without protuberance effects serve as the basis for the extension. Authors:

Harrison, Phillip↗
NASA NTRSDate not supplied

Precision Fermentation: Relieving the Crabtree Effect in S. cerevisiae through Genetic Engineering

Nutrient degradation in the current NASA pre-packaged food system poses significant challenges to crew health in missions beyond low earth orbit as certain vitamins and nutrients have been shown to degrade during extended storage, and resupply and fresh food items cannot be readily provided. BioNutrients(BN) uses synthetic biology in an effort to supplement the NASA food system by delivering in situ production of nutrients and therapeutics produced by genetically engineered microbes. One yeast S. cerevisiae strain utilized in BN is genetically modified to produce two types of antioxidants: zeaxanthin and β-carotene. Zeaxanthin is a non-provitamin A carotenoid and has been implicated in eye health and vision performance, and β-carotene is a provitamin A carotenoid. Microbial production of high-value nutrients can aid our understanding and address the issue of nutrient degradation and loss in the NASA food system. Although S. cerevisiae is an excellent candidate for a long shelf life, on-demand nutrient production system, its space applications are limited by the Crabtree effect where respiration is shut down in favor of fermentative metabolism when glucose is present in high concentrations, causing the release of unwanted ethanol. Current and likely future life support systems are negatively impacted by ethanol and ethanol release is strictly limited.To improve feasibility of using S. cerevisiae, we explored ways to reduce the Crabtree effect, thereby limiting its ethanol production. Specifically, we used CRISPR-cas9 to genetically modify various genes in this pathway

E Zaroff↗