Search NASA⌕ Search

SEARCH · Search NASA

Results for “Compressive Strength”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Use of Amino‐Functionalized CNTs and CVD Grown CNTs for Better Dispersion in Al Powder in the Fabrication of Composites

We report an improved process for the better dispersion of multiwalled carbon nanotubes (MWCNTs) in Al powder used for the fabrication of Al‐matrix composites employing powder metallurgy process. For obtaining a better dispersion of MWCNTs in Al, we used two types of MWCNTs. In the first type, the MWCNTs were firstly functionalized by using ammonium bi‐carbonate and mix with Al powder using a high energy ball mill in the presence of a process control agent. In the second type we grew MWCNTs directly on Al powder using CVD. Various mechanical properties of the composites including micro hardness, compressive strength etc. were determined. It has been observed that using functionalized MWCNTs (fCNTs) and CVD grown MWCNTs, these properties were found to enhance significantly. The dispersion of functionalized CNTs was studied by SEM and the interfacial bonding between functionalized CNTs and Al matrix using high resolution transmission electron microscopy (HRTEM).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Concrete density estimation by rebound hammer method

Concrete is the most common and cheap material for radiation shielding. Compressive strength is the main parameter checked for determining concrete quality. However, for shielding purposes density is the parameter that needs to be considered. X- and -gamma radiations are effectively absorbed by a material with high atomic number and high density such as concrete. The high strength normally implies to higher density in concrete but this is not always true. This paper explains and discusses the correlation between rebound hammer testing and density for concrete containing hematite aggregates. A comparison is also made with normal concrete i.e. concrete containing crushed granite.

07 ISOTOPE AND RADIATION SOURCES↗

Understanding the setting and hardening process of wollastonite-based brushite cement. Part 2: Influence of the boron and aluminum concentrations in the mixing solution

The mixing solution of wollastonite-based brushite cement is a phosphoric acid solution containing metallic cations and borax. This work complements a previous study devoted to the influence of the H{sub 3}PO{sub 4} concentration, Ca/P and liquid-to-solid (l/s) ratios on the setting and hardening process of the binder by providing new insight into the role of aluminum and boron. Boron retards the setting and decreases the heat released during the process. It also contributes to reduce the macroporosity of the hardened material but yields to poor compressive strength. With aluminum in the mixing solution, the mechanical properties are greatly improved thanks to the precipitation of an amorphous aluminophosphate which increases the density of the cement matrix. But aluminum alone leads to fast setting. A joint addition of boron and aluminum to the mixing solution makes it possible to get a material with optimized properties both in fresh and hardened states.

36 MATERIALS SCIENCE↗

LONG TERM AGING AND SURVEILLANCE OF 9975 PACKAGE COMPONENTS

The mission of the 9975 package, originally designed only for transportation of radioactive materials, has been broadened to include storage at the Savannah River Site. Two components of this package, namely the containment vessel O-rings and fiberboard overpack, require continued integrity assessment under the storage conditions. The performance of the components over time is being evaluated using accelerated-aging studies. Compression stress relaxation (CSR) and leak testing are being used to measure the performance of O-rings. The performance of the fiberboard is being evaluated using compression strength, thermal conductivity, specific heat capacity and other physical properties. Models developed from the data collected provide an initial prediction of service life for the two components, and support the conclusion that normal service conditions will not degrade the performance of the package beyond specified functional requirements for the first assessment interval. Increased confidence in this conclusion is derived from field surveillance data and destructive evaluation of packages removed from storage.

42 ENGINEERING↗

Focus on Different Binders for Concentrated Alkali and Magnesium Hydroxide Waste Conditioning - 18122

As part of a nuclear dismantling process, an effluent highly concentrated in alkali hydroxides and magnesium hydroxide could be produced and should be conditioned in a matrix capable of ensuring the adequacy between the hydraulic binder performances and the conditioning requirements. First, several matrices were chosen according to the compatibility of their interstitial pore water pH with our highly concentrated in alkali and magnesium hydroxide waste. Then, we observed their behavior from a macroscopic point of view when an increasing amount of alkali hydroxide is added in the mixing water. The compressive strength - an important requirement for the storage acceptance - along with some microstructural comprehension allowed us to discriminate the different binders. Only one was chose to continue the study with the integration of magnesium hydroxide in the formula. Finally, a validation of the early ages performance acquired without magnesium hydroxide was performed and a durability study is undergoing. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Influence of amorphous silica on the hydration in ultra-high performance concrete

Amorphous silica particles (silica) are used in ultra-high performance concretes to densify the microstructure and accelerate the clinker hydration. It is still unclear whether silica predominantly increases the surface for the nucleation of C–S–H phases or dissolves and reacts pozzolanically. Furthermore, varying types of silica may have different and time dependent effects on the clinker hydration. The effects of different silica types were compared in this study by calorimetric analysis, scanning and transmission electron microscopy, in situ X-ray diffraction and compressive strength measurements. The silica component was silica fume, pyrogenic silica or silica synthesized by a wet-chemical route (Stoeber particles). Water-to-cement ratios were 0.23. Differences are observed between the silica for short reaction times (up to 3 days). Results indicate that silica fume and pyrogenic silica accelerate alite hydration by increasing the surface for nucleation of C–S–H phases whereas Stoeber particles show no accelerating effect.

36 MATERIALS SCIENCE↗

Microstructural characterization of limestone exposed to heat with XRD, SEM and TG-DSC

Highlights: • The microstructure of limestone (25 °C–800 °C) was analyzed by XRD, SEM and TG-DSC. • The microstructural properties of the crystal are anisotropic in different crystal plane directions. • Microstructure controls the macroscopic properties of limestone. - Abstract: Limestone is a common rock used in many buildings and found in underground engineering projects. After exposure to heat, for example, the occurrence of fires, the stability of limestone structures is mostly affected, which may have safety repercussions. Therefore, the impact of thermal effects on the microstructure of limestone is investigated in this study, in which 8 groups of limestone samples are exposed to different temperatures (25 °C, 100 °C, 200 °C, 300 °C, 500 °C, 600 °C, 700 °C and 800 °C), after which X-ray diffraction, differential scanning calorimetry and scanning electron microscopy are carried out. The mineral composition and the microstructure of the samples are numerically modeled, in which the diffraction peaks, full width at half maximum, integral breadth, microstrain, average domain size and dislocation density are analyzed. The macroscopic properties obtained from the results in other works in the literature including porosity, compressive strength, damage coefficients and modulus of elasticity are also compared with the parameters above. The changes in the crystal structure of two minerals, calcite and dolomite, are found to be anisotropic in the different crystal plane directions. It is also found that the limestone microstructure affects the macroscopic properties. A temperature between 200 °C to 300 °C is the critical temperature at which both the macroscopic properties and macrostructure demonstrate significant changes.

36 MATERIALS SCIENCE↗

Nano-Hydroxyapatite/Fluoridated and Unfluoridated Bioactive Glass Composites: Structural Analysis and Bioactivity Evaluation

Biphasic bioceramic composites containing nano-hydroxyapatite (HAP) and nanosized bioactive glasses have been prepared in the form of pellets and have been examined for the effects of bioglass concentrations and sintering temperature on the structural transformations and bioactivity behavior. Pure stoichiometric nano-HAP was synthesized using sol-gel technique. Two bioglasses synthesized in this work--fluoridated bioglass (Cao-P{sub 2}O{sub 5}-Na{sub 2}O{sub 3}-CaF{sub 2}) and unfluoridated bioglass (Cao-P{sub 2}O{sub 5}-Na{sub 2}O{sub 3}) designated as FBG and UFBG respectively, were added to nano-HAP with concentrations of 5, 10, 12 and 15%. The average particle sizes of synthesized HAP and bioglasses were 23 nm and 35 nm, respectively. The pellets were sintered at four different temperatures i.e. 1000 deg. C, 1150 deg. C, 1250 deg. C and 1350 deg. C. The investigations involved study of structural and bioactivity behavior of green and sintered pellets and their deviations from original materials i.e. HAP, FBG and UFBG, using X-ray diffraction (XRD) and scanning electron microscopy (SEM). The phase composition of the sintered pellets was found to be non-stoichiometric HAP with {alpha}-TCP (tricalcium phosphate) and {beta}-TCP. It was revealed from SEM images that bonding mechanism was mainly solid state sintering for all pellets sintered at 1000 deg. C and 1150 deg. C and also for pellets with lower concentrations of bioglass i.e. 5% and 10% sintered at 1250 deg. C. Partly liquid phase sintering was observed for pellets with higher bioglass concentrations of 12% and 15% sintered at 1250 deg. C and same behaviour was noted for pellets at all concentrations of bioglasses at 1350 deg. C. The sintered density, hardness and compression strength of pellets have been influenced both by the concentration of the bioglasses and sintering temperature. It was observed that the biological HAP layer formation was faster on the green pellets surface than on pure HAP and sintered pellets, showing higher bioactivity in the green pellets.

36 MATERIALS SCIENCE↗

Characterization of geopolymer fly-ash based foams obtained with the addition of Al powder or H{sub 2}O{sub 2} as foaming agents

Recent innovations in geopolymer technology have led to the development of various different types of geopolymeric products, including highly porous geopolymer-based foams, which are formed by the addition of foaming agents to a geopolymer fly-ash based matrix. These agents decompose, or react with the liquid matrix or oxygen in the matrix, resulting in the release of gases which form pores prior to the hardening of the gel. The hardened structure has good mechanical and thermal properties, and can therefore be used for applications in acoustic panels and in lightweight pre-fabricated components for thermal insulation purposes. This study presents the results of the pore-forming process in the case when two different foaming agents, i.e. aluminium powder amounting to 0.07, 0.13 and 0.20 mass. % and H{sub 2}O{sub 2} amounting to 0.5, 1.0, 1.5 and 2.0 mass. %, were added to a fly-ash geopolymer matrix. The physical, mechanical, and microstructural properties of the thus obtained foams, and the effects of the type and amount of the added foaming agent, are presented and discussed. Highly porous structures were obtained in the case of both of the investigated foaming agents, with overall porosities up to 59% when aluminium powder was added, and of up 48% when H{sub 2}O{sub 2} was added. In the latter case, when 2% of the H{sub 2}O{sub 2} foaming agent was added, finer pores (with diameters up to 500 μm) occurred in the structure, whereas somewhat larger pores (some had diameters greater than 1 mm) occurred when the same amount of aluminium powder was added. The mechanical properties of the investigated foams depended on their porosity. In the case of highly porous structures a compressive strength of 3.3 MPa was nevertheless achieved for the samples containing 0.2% of aluminium powder, and 3.7 MPa for those containing 2.0% of H{sub 2}O{sub 2}. - Highlights: • Preparation of geopolymer foams based on fly ash with the addition of Al powder or H{sub 2}O{sub 2} as foaming agents • Determination of density, porosity and mechanical properties of such foams • Characterization of foaming process by means of X-ray micro-tomography (μcT)

36 MATERIALS SCIENCE↗

Limestone reaction in calcium aluminate cement–calcium sulfate systems

This paper reports a study of ternary blends composed of calcium aluminate cement, calcium sulfate hemihydrate and limestone. Compressive strength tests and hydration kinetics were studied as a function of limestone and calcium sulfate content. The phase evolution and the total porosity were followed and compared to thermodynamic simulation to understand the reactions involved and the effect of limestone on these binders. The reaction of limestone leads to the formation of hemicarboaluminate and monocarboaluminate. Increasing the ratio between sulfate and aluminate decreases the extent of limestone reaction.

36 MATERIALS SCIENCE↗

Characterization of a lime-pozzolan plaster containing phase change material

A PCM (Phase Change Material) modified lime-pozzolan plaster for improvement of thermal energy storage of building envelopes is studied in the paper. The investigated plaster is composed of lime hydrate, pozzolan admixture based on metakaolin and mudstone, silica sand, water and paraffin wax encapsulated in polymer capsule. The reference plaster without PCM application is studied as well. The analyzed materials are characterized by bulk density, matrix density, total open porosity, compressive strength and pore size distribution. The temperature of phase change, heat of fusion and crystallization are studied using DSC (Difference Scanning Calorimetry) analysis performed in air atmosphere. In order to get information on materials hygrothermal performance, determination of thermal and hygric properties is done in laboratory conditions. Experimental data reveal a substantial improvement of heat storage capacity of PCM-modified plaster as compared to the reference material without PCM.

36 MATERIALS SCIENCE↗

ANSTO Synroc Wasteforms for the Immobilization of a Range of Mo-99 Production Wastes - 19326

Tc-99m, the most commonly used radioisotope in nuclear medicine, is produced from the decay of Mo-99 which is predominantly produced in reactors by irradiation of enriched uranium targets. This results in three waste streams, one of which is a uranium filter cake containing fission products. This filter cake could itself be treated as a waste stream, or processed to retrieve the enriched uranium for further use, thus producing additional waste streams during reprocessing. All wastes are considered intermediate-level wastes and require an appropriate wasteform design for termination. ANSTO is collaborating with NECSA (Nuclear Energy Corporation of South Africa) to develop wasteform and processing solutions for the treatment of intermediate level wastes (ILW) from the production of Mo-99. The work is supported by the U.S. Department of Energy's (DOE) National Nuclear Security Administration (NNSA) with technical support from Argonne National Laboratory (ANL). Here we highlight some of the outcomes of this collaboration which has seen the investigation and performance testing of a range of waste treatment technologies. Among the treatment options for the various waste streams, including the enriched uranium filter cake itself, were glass, glass-ceramic, ceramic and geopolymer wasteforms. All wasteforms were characterized (e.g., by X-ray diffraction (XRD) and scanning electron microscopy (SEM)) and their performance characteristics, for example compressive strength and aqueous durability, determined by standard methods and compared. Consideration has been given to the most suitable, practical and cost effective solutions for the immobilization of these Mo-99 wastes. This paper will discuss the down-selection of wasteforms and process technologies for Mo-99 wastes and compare these with regards to wasteform performance and process technology readiness. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Effect of hydromagnesite addition on the properties and water resistance of magnesium oxysulfate (MOS) cement

Magnesium oxysulfate (MOS) cement exhibits excessive cracking when exposed to water because of the reaction of residual MgO that forms extensive Mg(OH){sub 2}, which significantly limits the application breadth of MOS cement. This study investigates the effects of the addition of hydromagnesite ((MgCO{sub 3}){sub 4}·Mg(OH){sub 2}·4H{sub 2}O) on the hydration products of MOS cement and the microstructure and physical properties of MOS paste samples. It was found that the addition of hydromagnesite increased the compressive strength and water resistance of MOS cement. This effect is mainly due to the reaction between hydromagnesite and free MgO present in the cement that forms magnesium carbonate (MgCO{sub 3}·Mg(OH){sub 2}·3H{sub 2}O) and acts as an additional binding phase. The use of hydromagnesite as an additive for improving the water resistance of MOS cement leads to a decrease in the residual MgO content and improves the water stability of amorphous materials.

36 MATERIALS SCIENCE↗

Use of Brazilian sugarcane bagasse ash in concrete as sand replacement

Sugarcane today plays a major role in the worldwide economy, and Brazil is the leading producer of sugar and alcohol, which are important international commodities. The production process generates bagasse as a waste, which is used as fuel to stoke boilers that produce steam for electricity cogeneration. The final product of this burning is residual sugarcane bagasse ash (SBA), which is normally used as fertilizer in sugarcane plantations. Ash stands out among agroindustrial wastes because it results from energy generating processes. Many types of ash do not have hydraulic or pozzolanic reactivity, but can be used in civil construction as inert materials. The present study used ash collected from four sugar mills in the region of Sao Carlos, SP, Brazil, which is one of the world's largest producers of sugarcane. The ash samples were subjected to chemical characterization, sieve analysis, determination of specific gravity, X-ray diffraction, scanning electron microscopy, and solubilization and leaching tests. Mortars and concretes with SBA as sand replacement were produced and tests were carried out: compressive strength, tensile strength and elastic modulus. The results indicated that the SBA samples presented physical properties similar to those of natural sand. Several heavy metals were found in the SBA samples, indicating the need to restrict its use as a fertilizer. The mortars produced with SBA in place of sand showed better mechanical results than the reference samples. SBA can be used as a partial substitute of sand in concretes made with cement slag-modified Portland cement.

09 BIOMASS FUELS↗

Cu- and Zn-doped alkali activated mortar – Properties and durability in (bio)chemically aggressive wastewater environments

Metakaolin-based alkali activated mortars (AAM) - with and without CuSO{sub 4}·5H{sub 2}O and ZnO addition (mass ratio M{sup n+}/solid binder 0.08% to 1.7%) - were casted and exposed within an extensive long-term field campaign over the period of 20 months to a sewer basin, strongly affected by biogenic acid corrosion. (Un-)exposed AAM were tested regarding their physicochemical and microstructural properties, bioreceptivity and overall durability. Metal addition led to a retarding effect during alkali-activation reaction, as well as to an increase in open porosity of up to 3.0% and corresponding lower compressive strength of up to 10.9%. Reduced microbial colonization and diversity were observed on AAM with Cu, while Zn addition led to increased biodiversity. We propose that the observed higher durability of Cu-doped AAM is due to antibacterial effects and associated reduction of biogenic acid production, superseding overall negative effects of metal-dosage on physical material properties. Observed lower durability of Zn-doped AAM was related to combined negative physicochemical and microbial effects.

36 MATERIALS SCIENCE↗

Influence of Iron Ore Addition on Metallurgical Reaction Behavior of Iron Coke Hot Briquette

Utilization of iron coke hot briquette (ICHB) has been considered to be one effective countermeasure to achieve low-carbon blast furnace. Before its actual application, a series of extensive fundamental investigations on the ICHB are required. In this study, the influence of iron ore addition on the metallurgical reaction behavior of ICHB made from carbonizing coal–iron ore composite agglomeration were investigated based on Chinese raw material conditions, and the corresponding mechanisms were revealed. The results show that the addition of iron ore concentrate leads to the degradation of the compressive strength and drum strength of ICHB, but they are maintained at a relatively high level. Furthermore, by increasing the addition ratio of iron ore from 0 to 20 pct, the density of ICHB is enhanced from 1413 to 1637 kg/m{sup 3}, and the porosity is increased from 8.03 to 12.84 pct, and the optical texture index (OTI) is reduced from 58.1 to 25.3. The phase composition of ICHB mainly consists of C, Fe, SiO{sub 2}, Fe{sub 3}O{sub 4}, and FeO after the addition of the iron ore concentrate. Moreover, the reactivity of ICHB is accelerated from 46.74 to 69.54 pct due to the catalytic effects of metallic iron and iron oxide, which worked as oxygen transfer carriers, while the post-reaction strength is reduced from 74.08 to 36.81 pct. In addition, the starting temperature of the ICHB gasification reaction is decreased remarkably from 919 °C to 839 °C. The activation energy (E{sub a}) for the gasification reaction under nonisothermal conditions is reduced from 312.78 to 249.83 kJ/mol, and the preexponential factor (A) shows a decreasing trend as well. Simultaneously, E{sub a} and A display the kinetic compensation effect and present a good linear relationship.

36 MATERIALS SCIENCE↗

Use of FGD gypsum in fire resistant panels

Gypsum from power plant flue gas desulphurization units (FGD gypsum) is a combustion by-product produced in high quantities. In this paper, gypsum panels composed of 100% FGD gypsum from two power plants have been subjected to different physico-chemical (density, pH, humidity), mechanical (flexural and compressive strength, surface hardness, impact resistance), fire resistance and environmental tests (leaching and radioactivity). The results obtained have been compared with the requirements established in some European standards for commercial gypsum and other standards for similar products. In addition, the panels manufactured have been compared with commercial gypsum panels in order to determine the recycling possibilities of this kind of material in this application.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Compressed glassy carbon: An ultrastrong and elastic interpenetrating graphene network

Carbon’s unique ability to have both sp 2 and sp 3 bonding states gives rise to a range of physical attributes, including excellent mechanical and electrical properties. We show that a series of lightweight, ultrastrong, hard, elastic, and conductive carbons are recovered after compressing sp 2 -hybridized glassy carbon at various temperatures. Compression induces the local buckling of graphene sheets through sp 3 nodes to form interpenetrating graphene networks with long-range disorder and short-range order on the nanometer scale. The compressed glassy carbons have extraordinary specific compressive strengths—more than two times that of commonly used ceramics—and simultaneously exhibit robust elastic recovery in response to local deformations. Finally, this type of carbon is an optimal ultralight, ultrastrong material for a wide range of multifunctional applications, and the synthesis methodology demonstrates potential to access entirely new metastable materials with exceptional properties.

36 MATERIALS SCIENCE↗