Search NASA⌕ Search

SEARCH · Search NASA

Results for “approximation methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

SU-E-T-247: Multi-Leaf Collimator Model Adjustments Improve Small Field Dosimetry in VMAT Plans

Purpose: The Elekta beam modulator linac employs a 4-mm micro multileaf collimator (MLC) backed by a fixed jaw. Out-of-field dose discrepancies between treatment planning system (TPS) calculations and output water phantom measurements are caused by the 1-mm leaf gap required for all moving MLCs in a VMAT arc. In this study, MLC parameters are optimized to improve TPS out-of-field dose approximations. Methods: Static 2.4 cm square fields were created with a 1-mm leaf gap for MLCs that would normally park behind the jaw. Doses in the open field and leaf gap were measured with an A16 micro ion chamber and EDR2 film for comparison with corresponding point doses in the Pinnacle TPS. The MLC offset table and tip radius were adjusted until TPS point doses agreed with photon measurements. Improvements to the beam models were tested using static arcs consisting of square fields ranging from 1.6 to 14.0 cm, with 45° collimator rotation, and 1-mm leaf gap to replicate VMAT conditions. Gamma values for the 3-mm distance, 3% dose difference criteria were evaluated using standard QA procedures with a cylindrical detector array. Results: The best agreement in point doses within the leaf gap and open field was achieved by offsetting the default rounded leaf end table by 0.1 cm and adjusting the leaf tip radius to 13 cm. Improvements in TPS models for 6 and 10 MV photon beams were more significant for smaller field sizes 3.6 cm or less where the initial gamma factors progressively increased as field size decreased, i.e. for a 1.6cm field size, the Gamma increased from 56.1% to 98.8%. Conclusion: The MLC optimization techniques developed will achieve greater dosimetric accuracy in small field VMAT treatment plans for fixed jaw linear accelerators. Accurate predictions of dose to organs at risk may reduce adverse effects of radiotherapy.

07 ISOTOPE AND RADIATION SOURCES↗

Beyond-classical computation in quantum simulation

Quantum computers hold the promise of solving certain problems that lie beyond the reach of conventional computers. However, establishing this capability, especially for impactful and meaningful problems, remains a central challenge. Here, we show that superconducting quantum annealing processors can rapidly generate samples in close agreement with solutions of the Schrödinger equation. We demonstrate area-law scaling of entanglement in the model quench dynamics of two-, three-, and infinite-dimensional spin glasses, supporting the observed stretched-exponential scaling of effort for matrix-product-state approaches. We show that several leading approximate methods based on tensor networks and neural networks cannot achieve the same accuracy as the quantum annealer within a reasonable time frame. Thus, quantum annealers can answer questions of practical importance that may remain out of reach for classical computation.

King, Andrew D. [D-Wave Quantum Inc., Burnaby, BC ↗

Transfer of a weakly bound electron in collisions of Rydberg atoms with neutral particles. I. Long-range interaction effects in the ionic-covalent coupling

Ion-pair formation processes are studied in collisions of Rydberg atoms with neutral particles possessing small electron affinities. Nonadiabatic transitions from a Rydberg covalent term to an ionic term of a quasi-molecule are considered using the modified Landau-Zener theory supplemented with calculation of survival factors of an anion decaying in the Coulomb field of a positive ion core. Using the technique of irreducible tensor operators and the momentum representation of the wavefunction of a highly excited atom, exact expressions are obtained for transition matrix elements and the ionic-covalent coupling parameter. The approach developed in the paper provides the description beyond the scope of a conventional assumption about a small variation of the wavefunction of the Rydberg atom on the range of electron coordinates determined by the characteristic radius of the wavefunction of the anion. This allows one to correctly consider long-range effects of the interaction between a weakly bound electron and the neutral core of a negative ion in processes under study. It is shown by the example of thermal collisions of Xe(nf) atoms with CH{sub 3}CN molecules that this is very important for a reliable quantitative description of anion formation with a low binding energy. The results are compared with experiments and calculations performed within the framework of a number of approximate methods.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Exactly solvable model of resonance tunneling of an electromagnetic wave in plasma containing short-scale inhomogeneities

Different variants of resonance tunneling of a transverse electromagnetic wave through a plasma layer containing short-scale (subwavelength) inhomogeneities, including evanescence regions to which approximate methods are inapplicable, are analyzed in the framework of an exactly solvable one-dimensional model. Complex plasma density profiles described by a number of free parameters determining the permittivity modulation depth, the characteristic scale lengths of plasma structures, their number, and the thickness of the inhomogeneous plasma layer are considered. It is demonstrated that reflection-free propagation of the wave incident on the layer from vacuum (the effect of wave-barrier transillumination) can be achieved for various sets of such structures, including plasma density profiles containing a stochastic component. Taking into account cubic nonlinearity, it is also possible to obtain an exact solution to the one-dimensional problem on the nonlinear transillumination of nonuniform plasma. In this case, the thicknesses of the evanescence regions decrease appreciably. The problem of resonance tunneling of electromagnetic waves through such barriers is of interest for a number of practical applications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of an Exactly Solvable Model of Resonance Tunneling of Electromagnetic Waves through Gradient Barriers in a Nonuniform Magnetoactive Plasma

An exactly solvable one-dimensional model describing resonance tunneling (reflectionless transmission) of a transverse electromagnetic wave through wide layers of magnetoactive plasma is developed on the basis of the Helmholtz equation. The plasma layers include a set of spatially localized density structures the amplitudes and thicknesses of which are such that approximate methods are inapplicable for their analysis. The profiles of the plasma density structures strongly depend on the choice of the free parameters of the problem that determine the amplitudes of plasma density modulation, characteristic scale lengths of the density structures, their number, and the total thickness of the nonuniform plasma layer. The plasma layers can also include a set of random inhomogeneities. The propagation of electromagnetic waves through such complicated plasma inhomogeneities is analyzed numerically within the proposed exactly solvable model. According to calculations, there are a wide set of inhomogeneous structures for which an electromagnetic wave incident from vacuum can propagate through the plasma layer without reflection, i.e., the complete tunneling of thick plasma barriers takes place. The model also allows one to exactly solve a one-dimensional problem on the nonlinear transillumination of a nonuniform plasma layer in the presence of cubic nonlinearity. It is important that, due to nonlinearity, the thicknesses of the evanescent plasma regions can decrease substantially and, at a sufficiently strong nonlinearity, such regions will disappear completely. The problem of resonance tunneling of electromagnetic radiation through gradient wave barriers is of interest for various applications, such as efficient heating of dense plasma by electromagnetic radiation and transmission of electromagnetic signals from a source located in the near-Earth plasma or deep in the plasma of an astrophysical object through the surrounding evanescent regions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dispersive approaches for three-particle final state interaction

In this work, we presented different representations of Khuri-Treiman equation, the advantage and disadvantage of each representations are discussed. With a scattering amplitude toy model, we also studied the sensitivity of solution of KT equation to left-hand cut of toy model and to the different approximate methods. At last, we give a brief discussion of Watson's theorem when three particles in final states are involved.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Mapping of the transient electric field causing spark suppression in Micromegas of the ATLAS New Small Wheels

Resistive strips Micromegas are employed in the ATLAS New Small Wheel project. They have already been installed and operate in the experimental cavern of the ATLAS experiment at CERN. This work attempts to describe the mechanism of the surface electric charge spread on a resistive strip of the Micromegas detector and the created transient electric field leading to the suppression of the spark rate in the amplification region. The electric field spatial mapping is calculated versus time by using the accurate 3-layer geometry as a function of the resistive layer thickness around its value used in Micromegas detectors. We also used the approximated method based on 2-layer geometry to investigate its discrepancy from the accurate one.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Quantum Computing and Second Quantization

Quantum computers are by their nature many particle quantum systems. Both the many-particle arrangement and being quantum are necessary for the existence of the entangled states, which are responsible for the parallelism of the quantum computers. Second quantization is a very important approximate method of describing such systems. This lecture will present the general idea of the second quantization, and discuss shortly some of the most important formulations of second quantization.

97 MATHEMATICS AND COMPUTING↗

pyDecay: A CRAM-Based Isotope Decay Solver

This module (pyDecay) implements a Chebyshev Rational Approximation Method (CRAM) for solving isotope decay equations, based on the work of M. Pusa. It provides a numerically stable and efficient method for evaluating the matrix exponential involved in nuclear decay calculations. This implementation of CRAM relies on the incomplete partial factorization (IPF) algorithm published by Pusa [3], with corrections noted by Romano et al.

Skutnik, SteveEugene [Oak Ridge National Laborator↗

Utilizing Adjoint-Based Error Estimates for Surrogate Models to Accurately Predict Probabilities of Events

In thist study, we develop a procedure to utilize error estimates for samples of a surrogate model to compute robust upper and lower bounds on estimates of probabilities of events. We show that these error estimates can also be used in an adaptive algorithm to simultaneously reduce the computational cost and increase the accuracy in estimating probabilities of events using computationally expensive high-fidelity models. Specifically, we introduce the notion of reliability of a sample of a surrogate model, and we prove that utilizing the surrogate model for the reliable samples and the high-fidelity model for the unreliable samples gives precisely the same estimate of the probability of the output event as would be obtained by evaluation of the original model for each sample. The adaptive algorithm uses the additional evaluations of the high-fidelity model for the unreliable samples to locally improve the surrogate model near the limit state, which significantly reduces the number of high-fidelity model evaluations as the limit state is resolved. Numerical results based on a recently developed adjoint-based approach for estimating the error in samples of a surrogate are provided to demonstrate (1) the robustness of the bounds on the probability of an event, and (2) that the adaptive enhancement algorithm provides a more accurate estimate of the probability of the QoI event than standard response surface approximation methods at a lower computational cost.

97 MATHEMATICS AND COMPUTING↗

Analysis of Curvilinear Geometry Characteristic-Based Particles Transport Discretizations (Final Report, Year 2)

The analysis of characteristic methods in Cartesian geometry performed by M. L. Adams, T. A. Wareing and W. F. Walters showed that characteristic methods on triangular cells meet the asymptotic diffusion limit. We currently working on the development of a linear characteristic method in RZ geometry on triangular grids. The grid is formed on the basis of a rectangular grid in (r, z) space. Each rectangular cell of this grid is divided into four triangular cells. The discretization method approximates the angular flux in each triangular cell with linear functions along the cell edge and in the interior of the cell. The unknowns are edge-average and cell-average angular fluxes, first spatial moments of the angular flux over the cell and edges. The scattering term is interpolated with a linear function in each cell by means of the cell-average scalar flux and its linear spatial moments. The main research issue is the calculation of linear spatial moments of the scalar flux based on the linear spatial moments of the angular flux in a cell in (ξ, z) coordinates that will enable one to construct a linear approximation of the cell-wise scalar flux with desired properties.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Sensitivity, Recalculated

Prior to this study, the sensitivity in nEXO was calculated using an approximate method that does not provide 90% coverage. I find it useful to understand the confidence level of a limit by focusing on the confidence level as a property of the method used to find the limit.A particular method (algorithm,formula) is applied to an experiment to produce a limit. That experiment was conducted in a particular universe with certain values of the physical parameters. We’d like a method than produces a correct limit for 90% of the experiments that could run. We also want that to be true for every universe—that is, regardless of the physical parameter value, the method should still produce a correct limit 90% of the time.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Gauging Variational Inference

Computing partition function is the most important statistical inference task arising in applications of Graphical Models (GM). Since it is computationally intractable, approximate methods have been used to resolve the issue in practice, where meanfield (MF) and belief propagation (BP) are arguably the most popular and successful approaches of a variational type. In this paper, we propose two new variational schemes, coined Gauged-MF (G-MF) and Gauged-BP (G-BP), improving MF and BP, respectively. Both provide lower bounds for the partition function by utilizing the so-called gauge transformation which modifies factors of GM while keeping the partition function invariant. Moreover, we prove that both G-MF and G-BP are exact for GMs with a single loop of a special structure, even though the bare MF and BP perform badly in this case. Our extensive experiments, on complete GMs of relatively small size and on large GM (up-to 300 variables) confirm that the newly proposed algorithms outperform and generalize MF and BP.

97 MATHEMATICS AND COMPUTING↗

Initial Testing of the Microscopic Depletion Implementation in the MAMMOTH Reactor Physics Application

Present and new nuclear fuels that will be tested at the Transient Reactor Test (TREAT) facility will be analyzed with the MAMMOTH reactor physics application, currently under development, at Idaho National Laboratory. MAMMOTH natively couples the BISON, RELAP-7, and Rattlesnake applications within the MOOSE framework. This system allows the irradiation of fuel from beginning of life in a nuclear reactor until it is placed in TREAT for fuel testing within the same analysis mesh and, thus, retaining a very high level of resolution and fidelity. The calculation of the isotopic distribution in fuel requires the solution to the decay and transmutation equations coupled to the neutron transport equation. The Chebyshev Rational Approximation Method (CRAM) is the current state-of-the-art in the field, as was chosen to be the solver for the decay and transmutation equations. This report shows that the implementation of the CRAM solver within MAMMOTH is correct with various analytic benchmarks for decay and transmutation of nuclides. The results indicate that the solutions with CRAM order 16 achieve the level of precision of the benchmark. The CRAM solutions show little sensitivity to the time step size and consistently produce a high level of accuracy for isotopic decay for time steps of 1x10^11 years. Comparisons to DRAGON5 with 297 isotopes yield comparable results, but some differences need to be further analyzed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Solar-Centered Grid Project Final Technical Report

This final technical Report for the Solar-Centered Grid project examines interactions of barriers to high levels of solar penetration at the Balancing Authority level and explores approaches to solutions to several such barriers. Results of a study to pool ACE variability and responsibility among disparate neighboring BAs are presented, as well as a methodology and results of a study for predicting ACE and frequency deviations in the sub-10-minute timeframe to serve as the underpinning for operational tools for managing fast solar ramps at the BA level. An example of approximate methods for cost-benefit analysis for probabilistic control center tools is presented, followed by a draft guide of best practices for such analysis.

14 SOLAR ENERGY↗

Scalable, In-situ Data Clustering Data Analysis for Extreme Scale Scientific Computing (Final Report)

The objective of this project is to address challenges in the design and development of scalable in-situ data clustering and analytics algorithms and software. Our goal is to develop parallel software consisting of a set of spatio-temporal data clustering and anomaly detection functions, both of which are very important for large-scale analysis and have wide applicability for in-situ runs as well as post-processing analysis. Our design principles for in-situ analysis consider the following: (1) identify parts of the computation can be done close to the data within the nodes, while it is still in memory; (2) extract analysis components can (and should) be performed in remote staging and analysis nodes; (3) develop error-bound approximation methods for applications tolerable for small errors; (4) identify the type of derived distributions and statistics, for spatio-temporal data, that can be kept locally in order to both accelerate computations and meet energy constraints in subsequent iterations and phases; (5) use a self-describing data format so that data can be consistent and understood among local storage (memory and SSDs) and at staging and analysis nodes, thereby providing portability and flexibility; (6) develop service-oriented functions that can schedule in-situ and post-hoc analysis tasks based on the dynamic requirements of applications. Our development focus is to produce the parallel data analysis software/library that will be scalable, reusable, extensible, and generic for applications in different disciplines. The software will be able to run in-situ with the simulations as well as post-hoc analysis. This approach will satisfy many synergistic requirements for data intensive applications executed on data coming from instruments and experiments. In particular, the proposed multilevel approach is directly applicable to perform design tradeoffs for running part of the algorithms near the instruments and the rest on remote (analysis) systems.

97 MATHEMATICS AND COMPUTING↗

Multi-Objective Adaptive Mesh Refinement Using Reinforcement Learning

Finite element methods approximate the solution to a partial differential equation (PDE) on a mesh consisting of many elements. In general, using more, smaller elements results in a lower error in the approximation. However, it is often possible to lower the error substantially by only refining, or decreasing the size of, the few elements in the mesh that have the highest error. Adaptive mesh refinement (AMR) is a process that selectively refines regions of a mesh with high error to achieve a desired accuracy in as few degrees of freedom (DOFs) as possible. AMR is favorable compared to uniform refinement, which refines all elements of the mesh equally, because it can often achieve the same accuracy without wasting extra computation time on refinement of elements that already have low error. However, it is difficult to know which elements to refine. In this report we explore ways to choose which elements to refine such that we minimize both the resulting error and the cumulative DOFs used in computation. In particular, we introduce a Pareto-front learning algorithm that trains a policy to give the optimal refinement actions to minimize the cumulative DOFs used to achieve a given target error. Such a policy is useful because it can be deployed on many different problem types where different accuracy levels are desired. Furthermore, training a single policy for a range of target errors allows us to use transfer learning to reduce the required training time.

97 MATHEMATICS AND COMPUTING↗

Characterizing the Uncertainty of Measurement of Traceable Isotope Ratios with Bayesian Statistical Techniques

Analytical techniques such as multicollector—inductively coupled plasma—mass spectrometry (MC-ICP-MS) are routinely employed at SRNL, other National Laboratories, and in academia to determine the precise isotopic composition of diverse natural and anthropogenic samples (e.g., rocks and nuclear materials). Quantifying and reporting uncertainty in such analyses, while regularly performed, have a rigorous statistical foundation. The Guide to the Expression of Uncertainty in Measurement 4 (GUM) outlines conventional techniques used to assess such uncertainty. As the accessibility and speed of statistical computing increase, there is a need to modernize conventional techniques. For example, Supplement 1 to the 3rd to the GUM suggests the use of approximation methods as an updated approach to the GUM.

McLarty, Ellis C.↗