Search NASA⌕ Search

SEARCH · Search NASA

Results for “computer aided engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Computing Equilibrium Chemical Compositions

Chemical Equilibrium With Transport Properties, 1993 (CET93) computer program provides data on chemical-equilibrium compositions. Aids calculation of thermodynamic properties of chemical systems. Information essential in design and analysis of such equipment as compressors, turbines, nozzles, engines, shock tubes, heat exchangers, and chemical-processing equipment. CET93/PC is version of CET93 specifically designed to run within 640K memory limit of MS-DOS operating system. CET93/PC written in FORTRAN.

Mcbride, Bonnie J.↗
NASA NTRS2004

Automated Parameter Studies Using a Cartesian Method

Computational Fluid Dynamics (CFD) is now routinely used to analyze isolated points in a design space by performing steady-state computations at fixed flight conditions (Mach number, angle of attack, sideslip), for a fixed geometric configuration of interest. This "point analysis" provides detailed information about the flowfield, which aides an engineer in understanding, or correcting, a design. A point analysis is typically performed using high fidelity methods at a handful of critical design points, e.g. a cruise or landing configuration, or a sample of points along a flight trajectory.

Murman, Scott M.↗
NASA NTRS2003

Structural Anomalies Detected in Ceramic Matrix Composites Using Combined Nondestructive Evaluation and Finite Element Analysis (NDE and FEA)

Most reverse engineering approaches involve imaging or digitizing an object and then creating a computerized reconstruction that can be integrated, in three dimensions, into a particular design environment. The rapid prototyping technique builds high-quality physical prototypes directly from computer-aided design files. This fundamental technique for interpreting and interacting with large data sets is being used here via Velocity2 (an integrated image-processing software, ref. 1) using computed tomography (CT) data to produce a prototype three-dimensional test specimen model for analyses. A study at the NASA Glenn Research Center proposes to use these capabilities to conduct a combined nondestructive evaluation (NDE) and finite element analysis (FEA) to screen pretest and posttest structural anomalies in structural components. A tensile specimen made of silicon nitrite (Si3N4) ceramic matrix composite was considered to evaluate structural durability and deformity. Ceramic matrix composites are being sought as candidate materials to replace nickel-base superalloys for turbine engine applications. They have the unique characteristics of being able to withstand higher operating temperatures and harsh combustion environments. In addition, their low densities relative to metals help reduce component mass (ref. 2). Detailed three-dimensional volume rendering of the tensile test specimen was successfully carried out with Velocity2 (ref. 1) using two-dimensional images that were generated via computed tomography. Subsequent, three-dimensional finite element analyses were performed, and the results obtained were compared with those predicted by NDE-based calculations and experimental tests. It was shown that Velocity2 software can be used to render a three-dimensional object from a series of CT scan images with a minimum level of complexity. The analytical results (ref. 3) show that the high-stress regions correlated well with the damage sites identified by the CT scans and the experimental data. Furthermore, modeling of the voids collected via NDE offered an analytical advantage that resulted in more accurate assessments of the material s structural strength. The top figure shows a CT scan image of the specimen test section illustrating various hidden structural entities in the material and an optical image of the test specimen considered in this study. The bottom figure represents the stress response predicted from the finite element analyses (ref .3 ) for a selected CT slice where it clearly illustrates the correspondence of the high stress risers due to voids in the material with those predicted by the NDE. This study is continuing, and efforts are concentrated on improving the modeling capabilities to imitate the structural anomalies as detected.

Abdul-Aziz, Ali↗
NASA NTRS1989

A laser based computer aided non-intrusive technique for full field flow characterization in macroscopic curved channels

This paper presents the application of a laser based, computer aided image processing technique for the nonintrusive evaluation of field velocities and accelerations in a 180 deg curved channel geometry, characteristic of inlet passages of the cowls of airbreathing aircraft engines. The method based on the illumination of the test section with a laser generated planar sheet of light, allows microscopic or macroscopic surveillance of fluid flow across or along large cross sections for relatively long (greater than 1 sec) periods of time. The method is Lagrangian in concept and permits identification and tracking of the same particle, thus facilitating construction of more comprehensive trajectories and the calculation of velocities and accelerations.

Braun, M. J.↗
NASA NTRS1993

Proceedings of the 1993 Conference on Intelligent Computer-Aided Training and Virtual Environment Technology

The volume 2 proceedings from the 1993 Conference on Intelligent Computer-Aided Training and Virtual Environment Technology are presented. Topics discussed include intelligent computer assisted training (ICAT) systems architectures, ICAT educational and medical applications, virtual environment (VE) training and assessment, human factors engineering and VE, ICAT theory and natural language processing, ICAT military applications, VE engineering applications, ICAT knowledge acquisition processes and applications, and ICAT aerospace applications.

Hyde, Patricia R.↗
NASA NTRS1996

Design of a mixer for the thrust-vectoring system on the high-alpha research vehicle

One of the advanced control concepts being investigated on the High-Alpha Research Vehicle (HARV) is multi-axis thrust vectoring using an experimental thrust-vectoring (TV) system consisting of three hydraulically actuated vanes per engine. A mixer is used to translate the pitch-, roll-, and yaw-TV commands into the appropriate TV-vane commands for distribution to the vane actuators. A computer-aided optimization process was developed to perform the inversion of the thrust-vectoring effectiveness data for use by the mixer in performing this command translation. Using this process a new mixer was designed for the HARV and evaluated in simulation and flight. An important element of the Mixer is the priority logic, which determines priority among the pitch-, roll-, and yaw-TV commands.

Pahle, Joseph W.↗
NASA NTRS2008

Review, Selection and Installation of a Rapid Prototype Machine

The objective of this paper is to impress upon the reader the benefits and advantages of investing in rapid prototyping (additive manufacturing) technology thru the procurement of one or two new rapid prototyping machines and the creation of a new Prototype and Model Lab at the Kennedy Space Center (KSC). This new resource will be available to all of United Space Alliance, LLC (USA), enabling engineers from around the company to pursue a more effective means of communication and design with our co-workers, and our customer, the National Aeronautics and Space Administration (NASA). The Rapid Protoyping/3D printing industry mirrors the transition the CAD industry made several years ago, when companies were trying to justify the expenditure of converting to a 3D based system from a 2D based system. The advantages of using a 3D system seemed to be outweighed by the cost it would take to convert not only legacy 2D drawings into 3D models but the training of personnel to use the 3D CAD software. But the reality was that when a 3D CAD system is employed, it gives engineers a much greater ability to conceive new designs and the ability to engineer new tools and products much more effectively. Rapid Prototyping (RP) is the name given to a host of related technologies that are used to fabricate physical objects directly from Computer Aided Design (CAD) data sources. These methods are generally similar to each other in that they add and bond materials in a layer wise-fashion to form objects, instead of machining away material. The machines used in Rapid Prototyping are also sometimes referred to as Rapid Manufacturing machines due to the fact that some of the parts fabricated in a RP machine can be used as the finished product. The name "Rapid Prototyping" is really a misnomer. It is much more than prototypes and it is not always rapid.

McEndree, Caryl↗
NASA NTRS1975

Computer aided airship design

The Comprehensive Airship Sizing and Performance Computer Program (CASCOMP) is described which was developed and used in the design and evaluation of advanced lighter-than-air (LTA) craft. The program defines design details such as engine size and number, component weight buildups, required power, and the physical dimensions of airships which are designed to meet specified mission requirements. The program is used in a comparative parametric evaluation of six advanced lighter-than-air concepts. The results indicate that fully buoyant conventional airships have the lightest gross lift required when designed for speeds less than 100 knots and the partially buoyant concepts are superior above 100 knots. When compared on the basis of specific productivity, which is a measure of the direct operating cost, the partially buoyant lifting body/tilting prop-rotor concept is optimum.

Davis, S. J.↗
NASA NTRS1970

Development of a KSC test and flight engineering oriented computer language, Phase 1

Ten, primarily test oriented, computer languages reviewed during the phase 1 study effort are described. Fifty characteristics of ATOLL, ATLAS, and CLASP are compared. Unique characteristics of the other languages, including deficiencies, problems, safeguards, and checking provisions are identified. Programming aids related to these languages are reported, and the conclusions resulting from this phase of the study are discussed. A glossary and bibliography are included. For the reports on phase 2 of the study, see N71-35027 and N71-35029.

Case, C. W.↗
NASA NTRS1995

Special-Purpose Robotic Welder

Robotic-welding apparatus developed for use in repairing main combustion chamber of rocket engine. Design features beneficial in other robotic-welding applications; for example, manufacture and repair of pressure vessels, chemical-processing vessels, etc. Design problem solved by iterative application of computer-aided techniques.

Mcferrin, David C.↗
NASA NTRS2003

Wind-US Flow Calculations for the M2129 S-Duct Using Structured and Unstructured Grids

Computational Fluid Dynamics (CFD) flow solutions for the M2129 diffusing S-duct with and without vane effectors were computed by the Wind-US flow solver. Both structured and unstructured 3-D grids were used. Without vane effectors, the duct exhibited massive flow separation in both experiment and CFD. With vane effectors installed, the flow remained attached and aerodynamic losses were reduced. Total pressure recovery and distortion near the duct outlet were computed from the solutions and compared favorably to experimental values. These calculations are part of a validation effort for the Wind-US code. They also provide an example case to aid engineers in learning to use the Wind-US software.

Mohler, Stanley R., Jr.↗
NASA NTRS2001

Turbine Blade Alloy

The High Speed Research Airfoil Alloy Program developed a fourth-generation alloy with up to an +85 F increase in creep rupture capability over current production airfoil alloys. Since improved strength is typically obtained when the limits of microstructural stability are exceeded slightly, it is not surprising that this alloy has a tendency to exhibit microstructural instabilities after high temperature exposures. This presentation will discuss recent results obtained on coated fourth-generation alloys for subsonic turbine blade applications under the NASA Ultra-Efficient Engine Technology (UEET) Program. Progress made in reducing microstructural instabilities in these alloys will be presented. In addition, plans will be presented for advanced alloy development and for computational modeling, which will aid future alloy development efforts.

MacKay, Rebecca↗
NASA NTRS2018

Rapid Model Import Tool (RMIT)

Our project is about developing a tool to implement conversion of 3D Computer Aided Design (CAD) models produced with software such as Delmia, 3DS Max, or Maya, into a size and format compatible with the Unity 3D environment. RMIT will be used to aid KSC engineering personnel in the design, development, testing, operations, and training on spacecraft, launch vehicles, facilities, and ground support equipment. For our project, we are using Blender, a free/open-source 3D graphics software, with the goal of developing, testing, and deploying a 3D CAD model converter tool. I worked on using Blender to import 3D CAD models exported from CATIA software into Collada file format. The Collada file format has file extension DAE. Importing the Collada DAE file as is into Blender, generates dots and dashes. In 3DS Max, there is an existing OpenCollada plugin and with that plugin, 3DS Max can import the DAE file successfully. But, Blender does not seem to have an OpenCollada plugin, so I worked on writing a new OpenCollada plugin for Blender. Since 3DS Max was able to display the image, I looked into comparing differences between the original DAE file and the DAE file exported from 3DS Max using the OpenCollada plugin. As Collada documents describing digital assets are XML files with file extension DAE, Collada files contains XML tags, making them easily modifiable. After some research, it appears that Blender does not like primitive 2D tags like tristrips and trifans. Changing those tags to polygons slightly improved the image, but the pieces were exploded. I found after further research comparing differences between the original file and the file exported from 3DS Max that the values inside the translate tags in the original file are scaled down by a factor of 25.4 in the exported file from 3DS Max, representing the millimeters to inches conversion (1 inch = 25.4 millimeters). After scaling down values inside all of the translate tags by 25.4, the exploded pieces stuck back in, but the image needed further improvement. I have been able to create a new plugin in Blender that takes the original DAE file, replaces the primitive 2D tags tristrips and trifans with polygons, scales down the values inside the translate tags by a factor of 25.4, and saves the changes into a temporary DAE file. After the temporary DAE file is imported into Blender, the temp file is then deleted, keeping the original DAE file intact. Starting with a DAE file that is exported using the NASA Enterprise Visualization Application (NEVA), a Collada exporter, from CATIA gives better results. NEVA is a Design Visualization product that is used for exporting 3D models from CATIA. With NEVA, the up axis is defined in the top-level node if navigation gravity is enabled. With that file, just replacing the primitive tags tristrips and trifans with polygons in yields a much improved image in Blender. As we identify more differences between the original DAE file and the DAE file exported from 3DS Max, this plugin can be improved further. Our goal is to have a model that is formatted and sized for import into Unity, and we are trying out different 3D programs to see which will work best.

Ayyangar, Arjun↗
NASA NTRS1995

Supertough Stainless Bearing Steel

Composition and processing of supertough stainless bearing steel designed with help of computer-aided thermodynamic modeling. Fracture toughness and hardness of steel exceeds those of other bearing steels like 440C stainless bearing steel. Developed for service in fuel and oxidizer turbopumps on Space Shuttle main engine. Because of strength and toughness, also proves useful in other applications like gears and surgical knives.

Olson, Gregory B.↗
NASA NTRS2006

Program Synthesizes UML Sequence Diagrams

A computer program called "Rational Sequence" generates Universal Modeling Language (UML) sequence diagrams of a target Java program running on a Java virtual machine (JVM). Rational Sequence thereby performs a reverse engineering function that aids in the design documentation of the target Java program. Whereas previously, the construction of sequence diagrams was a tedious manual process, Rational Sequence generates UML sequence diagrams automatically from the running Java code.

Barry, Matthew R.↗
NASA NTRS1979

Project CAD as of July 1978: CAD support project, situation in July 1978

The structure of Computer Aided Design (CAD) and the requirements for program developments in past and future are described. The actual standard and the future aims of CAD programs are presented. The developed programs in: (1) civil engineering; (2) mechanical engineering; (3) chemical engineering/shipbuilding; (4) electrical engineering; and (5) general programs are discussed.

Boesch, L.↗
NASA NTRS1989

NASA Propagation Information Center

The NASA Propagation Information Center became formally operational in July 1988. It is located in the Department of Electrical and Computer Engineering of the University of Colorado at Boulder. The Center is several things: a communications medium for the propagation with the outside world, a mechanism for internal communication within the program, and an aid to management.

Smith, Ernest K.↗
NASA NTRS1990

NASA propagation information center

The NASA Propagation Information Center became formally operational in July 1988. It is located in the Department of Electrical and Computer Engineering of the University of Colorado at Boulder. The center is several things: a communications medium for the propagation with the outside world, a mechanism for internal communication within the program, and an aid to management.

Smith, Ernest K.↗