Search NASA⌕ Search

SEARCH · Search NASA

Results for “marine”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Laser Surface Processing of Alloys for Corrosion Protection (Final Project Report of Marine Energy Seedling Project)

This is the final project report for the MHK Seedling project. The report describes use of laser surface processing (LSP) to modify the surface of test materials (Al, steel) and the corrosion testing performed on the resulting samples in different corrosion environments. Data shows that LSP improved the corrosion resistance of Al and steel used in this work relative to respective non-LSP samples. The data also showed that each material had a specific range of laser processing conditions where the beneficial effects of LSP (i.e. improvement in corrosion protection) were observed. Application of LSP to enable low-cost materials in marine environments, additional microstructural analysis and long-term testing are proposed to further develop this technology for marine renewable energy and systems.

36 MATERIALS SCIENCE↗
DOE OSTI2022

DOE-NOAA Marine Cloud Brightening (Workshop Report 2022)

Marine Cloud Brightening (MCB) refers to the deliberate injection of aerosol particles into marine clouds to increase their reflection of solar radiation to temporarily cool the planet while decarbonization efforts are pursued. A workshop was conducted to assess the state of knowledge in the field of MCB, and to provide a possible research path toward reducing unknowns in key components of the underlying physical science. This three-day workshop took place in April 2022 and was jointly sponsored by Department of Energy (DOE)’s Atmospheric System Research (ASR) program and the National Oceanic and Atmospheric Administration (NOAA). The workshop focused on identifying key physical science knowledge gaps necessary to answer the following driving questions: 1) Is MCB feasible over sufficiently large regions and is implementation practicable for long-enough durations to avert the worst impacts of global warming? 2) If practicable, what will be the regional impacts of such MCB interventions? 3) Do we have adequate systems in place to detect and quantify the effects of such interventions? 4) What physical and engineering science challenges must be resolved satisfactorily before we can consider embarking on MCB?

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

DOE-NOAA Marine Cloud Brightening Workshop

Marine Cloud Brightening (MCB) refers to the deliberate injection of aerosol particles into marine clouds to increase their reflection of solar radiation to temporarily cool the planet while decarbonization efforts are pursued. A workshop was conducted to assess the state of knowledge in the field of MCB, and to provide a possible research path toward reducing unknowns in key components of the underlying physical science. This three-day workshop took place in April 2022 and was jointly sponsored by Department of Energy (DOE)’s Atmospheric System Research (ASR) program and the National Oceanic and Atmospheric Administration (NOAA). The workshop focused on identifying key physical science knowledge gaps necessary to answer the following driving questions: 1. Is MCB feasible over sufficiently large regions and is implementation practicable for long-enough durations to avert the worst impacts of global warming? 2. If practicable, what will be the regional impacts of such MCB interventions? 3. Do we have adequate systems in place to detect and quantify the effects of such interventions? 4. What physical and engineering science challenges must be resolved satisfactorily before we can consider embarking on MCB?

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Use of Tethys Engineering by the Marine Energy Community (User Review Report)

In partial fulfillment of the Annual (SMART) Milestone for Q3 of FY22, this report details the results of the peer review process carried out on the use and function of Tethys Engineering. During Q3 of FY22, Pacific Northwest National Laboratory (PNNL) solicited broad feedback from a self-selected subset of the marine energy community on the use and effectiveness of key pages on Tethys Engineering. A total of 39 responses were collected from the greater marine energy community.

42 ENGINEERING↗
DOE OSTI2023

Entrainment and aerosol effects on marine boundary-layer clouds: An investigation using ACE-ENA data from HOLODEC, G1, Pico and ACTOS (Final Report on Project Activities)

Marine boundary-layer clouds cover large regions of the globe and are known to strongly influence radiative balances. The microphysical properties and persistence of these clouds are tightly coupled with cloud-top entrainment and aerosol properties within both the boundary layer and the overlying free troposphere. This work addressed the microphysical response to entrainment and aerosol properties in marine stratocumulus clouds, using data from the Aerosol and Cloud Experiments in the Eastern North Atlantic (ACE-ENA) project. Specifically, emphasis was placed on 1. extensive in situ measurements taken with the Atmospheric Radiation Measurement (ARM) G1 aircraft using the Holographic Detector for Clouds (Holodec) instrument; 2. airborne measurements obtained with the helicopter-borne Airborne Cloud Turbulence Observation System (ACTOS) operated by the Leibniz Institute for Tropospheric Research (TROPOS) during the first phase of ACE-ENA; and 3. above-boundary-layer, mountain-top measurements taken at the Pico Mountain Observatory (OMP) by the research group of the co-investigator and scientists from TROPOS during the first phase of ACE-ENA. The work is aligned with the topic “Warm Boundary-Layer Atmospheric Processes.” Key results include the following. Data from the Holographic Detector for Clouds (Holodec) were reprocessed, refined, and validated through a careful instrument intercomparison, resulting in a high-quality dataset available on the ARM archive for ACE-ENA. High-resolution ACTOS measurements of thermodynamics, microphysical, and turbulence properties were analyzed to explore the behavior of the entrainment velocity at cloud top. Analysis of the vertical variability of cloud droplet size distribution shape suggests that mixing is more inhomogeneous near cloud top, and more homogeneous deeper into the cloud. Analysis of aerosol measurements from OMP explored the mixing state and cloud condensation nucleus properties, as well as the implications for radiative forcing. Finally, a machine learning algorithm was developed for identifying characteristic cloud droplet size distributions, and was employed to explore microphysical regimes in stratocumulus clouds observed during ACE-ENA. The characteristic size distributions are narrow, and only when spatially averaged do they produce the broad “gamma” distributions typically assumed in models. This implies that precipitation development should account for variability and correlations in the distribution shape as well as the number concentration of cloud droplets.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Biofuel Viability for the Ocean-Going Marine Sector

Marine transport contributes significantly to global carbon dioxide emissions but is one of the most difficult sectors to decarbonize because full electrification is infeasible. Renewable, low–carbon biofuels offer a potential path to decarbonization of the marine sectors but the understanding of the effects of new biofuels on engine performance and emissions is limited. In this document we report on the results of a series of studies on the techno-economic, life cycle and technical feasibility of biofuels as replacements for heavy fuel oils currently used to fuel large ocean-going vessels.

09 BIOMASS FUELS↗
DOE OSTI2023

Energy Justice Framework for Marine Energy: Considerations from PacWave

To accelerate the energy transition while addressing land use conflicts and community opposition, federal policies and incentives require that new energy infrastructure provide direct benefits to communities, and ensure that these benefits remain in the community. The objective of this study is to develop a framework for collecting demographic, socioeconomic, and environmental data and supporting communities in understanding how such data can support more just and equitable outcomes. Specifically, this study addresses two research questions: (1) How can energy justice be incorporated into ME project life cycle, and (2) what social and economic data are needed to assess how marine energy development supports energy justice? Based on our literature review and the data collection template, a case study of PacWave, a wave energy testing facility located on the central Oregon Coast, is employed to draw more specific implications for how energy justice can be integrated into marine energy. PacWave represents a flagship investment by Oregon State University, the State of Oregon, and the Department of Energy. The facility is situated in Lincoln County, which is home to the Confederated Tribes of Siletz Indians and family-scale fishing enterprises. PacWave has strong community support as a testing site and holds potential to provide valuable lessons for other communities.

16 TIDAL AND WAVE POWER↗
DOE OSTI2024

2024 OES-Environmental 2024 State of the Science Report, Chapter 6: Strategies to Aid Consenting Processes for Marine Renewable Energy

While the marine renewable energy (MRE) industry has made positive strides in the past decade, challenges remain that stall forward progress, scaling up, and commercialization. For MRE to provide a viable solution to address the effects of climate change and achieve sustainable development and renewable energy goals, identifying and understanding barriers and opportunities to deployment is key. Barriers to date have included long consenting timelines, costly in-depth baseline data collection and monitoring requirements, and hesitancy in some countries to approve device and array deployments (Copping & Hemery 2020; Kramer et al. 2020). Some of the key drivers behind these barriers are 1) uncertainty about potential effects of MRE on marine animals, habitats, and the environment; 2) lack of familiarity with MRE technologies; or 3) challenges accessing available scientific information (Copping et al. 2020a).

16 TIDAL AND WAVE POWER↗
DOE OSTI2024

2024 OES-Environmental 2024 State of the Science Report, Chapter 9: Beyond Single Marine Renewable Energy Devices: A System-wide Effects Approach

Global expansion of renewable energy, including marine renewable energy (MRE) technology development is necessary to mitigate the effects of climate change, facilitate a sustainable transition from carbon-based energy sources, and satisfy national energy security needs using locally produced electricity (European Commission 2022; IPCC 2023; IRENA 2020). As MRE engineering and research continue to focus on designing devices for deployment in nearshore and offshore waters around the world, researchers are also examining potential environmental effects on marine animals, habitats, and ecosystem processes. To date, the focus has been on interactions between small numbers of MRE devices (1-6) and the environment, such as collisions between animals and turbine blades, the effects of underwater noise and electromagnetic field (EMF) emissions, changes in habitats and oceanographic processes, risk of entanglement of animals, and displacement of animals (Boehlert & Gill 2010; Copping & Hemery 2020) (see Chapter 3).

16 TIDAL AND WAVE POWER↗
DOE OSTI2025

Optimized V1G and V2G Electric Vehicle Fleet Management and Grid Transaction at Marine Corps Air Station Miramar in San Diego, CA

The overall technical goal of the project was to demonstrate an all-electric bi-directional non-tactical fleet at Marine Corps Air Station (MCAS) Miramar that was integrated and controlled with other distributed energy resources (DERs) (i.e., PV, stationary battery, and building loads) to provide resilience to critical electric loads in the event of grid outages, to minimize charging costs, and to provide economic energy resources to electricity markets. In this project, the specific, technical objectives were: 1. Demonstrate that bi-directional electric vehicles can provide critical complementary services to fixed storage batteries in microgrid applications while performing function as non-tactical vehicles. 2. Demonstrate participation of bi-directional (V2G) and unidirectional (V1G) PEVs for demand management and minimization of charging costs. 3. Demonstrate integration of multiple DERs for grid service participation. US Marine Corps Air Station (MCAS) Miramar in San Diego was the site of this electric vehicle-to-microgrid-utility grid test and demonstration project. Existing microgrid assets in this study included (1) a public works building; (2) a 30-kW rooftop photovoltaic (PV) system and (3) a separate 250 kW carport PV system. In this project, six bi-directional V2G vans were located at the MCAS Miramar’s showcase building-scale microgrid to develop and test technical capabilities that V2G can provide in microgrid applications (e.g., cost reduction and resiliency). These resources provided aggregated demand management and simulated participation in current retail DR programs. The vehicles used in this demonstration were selected because they provided functionality that MCAS Miramar needed, 15 passenger transport and facilities work cargo carrying capacity, and bi-directional charging capability that the research project required. All vehicles in this study were manufactured and distributed by VIA Motors, Inc. There were six vehicles total and each was VIA’s VTRUX eREV V2G model, a modified General Motors Chevrolet 2500 2WD van. Three of the vans were configured as passenger vans and the other three were configured as cargo vans. Each van had an on-board bi-direcrtional inverter/charger, Bel Power Solutions model 350INVCHGT150-120-240-8G nominally rated at +/-15 kW. The VIA van’s charging connector follows the J1772 charging protocol. The bi-directional EVSEs demonstrated in this study were manufactured by Coritech, Inc. Each VGI-80-AC charging station enabled enhanced V2G charging capability to a Clipper Creek CS-100 charging module. The enhanced capabilities included ethernet communication following the SEP2.0 protocol with a distributed energy resource function set and an operator screen displaying real-time SOC, voltage, and current. The VGI-80-AC charging stations are classified as level 2 with a maximum current output of 80 A or effectively 19 kW. The VIA van’s onboard charger limited the charging and discharging power to 15 kW in each direction. A control computer was installed in the EWOC and connected to an existing monitor. The V2G control communication network was a completely stand-alone closed system that did not have any connection to any other networks on the base. A cybersecure remote communication connection was created with a cellular modem, firewall hardware, and a virtual private network configuration.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2025

Optimize the Autonomous Sensor Fish Device for Understanding Interactions of Aquatic Animals with Marine and Hydrokinetic and Hydro Systems (CRADA 476) Final Report

This project at the Pacific Northwest National Laboratory (PNNL) enhances our understanding of how aquatic life interacts with marine renewable energy (MRE) and hydropower systems through the development and testing of advanced sensor technology. The Marine Sensor Fish (MSF) and its smaller variants, the Sensor Fish Mini (SF Mini) and Flexible Sensor Fish (FSF), measure critical environmental stressors, such as shear forces, pressure changes, and strike impacts, that are essential for assessing the risks posed by energy devices, including tidal turbines, hydropower installations, and other MRE infrastructure. Rigorous field testing has shown that these tools are effective in capturing detailed data on turbulence, pressure variations, strike impacts, and other stressors near these devices, providing valuable insights into the conditions faced by aquatic species. Economically, these tools offer renewable energy developers a practical solution for streamlining environmental assessments and ensuring regulatory compliance, ultimately reducing costs associated with evaluating and mitigating ecological impacts. This research also benefits the public by promoting the growth of renewable energy sources that protect aquatic ecosystems, advancing both sustainable energy production and environmental stewardship.

13 HYDRO ENERGY↗
DOE OSTI2025

Marine Hydrogen Demonstration

This report summarizes Phase 1 of a project involving the design of a Floating Hydrogen Production and Dispensing Barge destined for the Port of San Francisco (SF). The H 2 Barge is designed to produce renewable H 2 at the rate of ~ 530 kg/day, storing 512 kg of hydrogen at 517-bar, allowing fast refueling of hydrogen fuel cell vessels and land-side hydrogen delivery trailers for distribution into the nascent SF hydrogen ecosystem. The broader considerations that impacted the H2 Barge design are also described. An account is given of a new review process formulated by the United States Coast Guard (USCG) to review this first-of-its-kind maritime implementation of hydrogen technology. The immediate goals of the H 2 Barge Project are to 1) demonstrate the feasibility, viability and methods of hydrogen production, storage and fueling in a maritime context, 2) help shape (where needed) and navigate the required local, state and federal regulatory gauntlet and 3) catalyze a “green hydrogen ecosystem” (both marine and landside) with locally produced renewable hydrogen at the San Francisco waterfront. A summary is also given of the modeling and experimental activity of Phase 1 directed to the development of science-based refueling protocols for large marine Type IV 250-bar hydrogen tanks. Combined modeling and experimental studies are reported of the filling of large (28 kg) 250-bar Type IV hydrogen tanks of the type being deployed on early hydrogen ferries, such as the MV Sea Change. The primary question was to determine how such tanks can be successfully filled (state of charge greater than 97%) within 45 minutes without exceeding the 82 °C temperature limit historically set for such tanks. The studies show that a gas injector is needed avoid thermal stratification during filling which can result in potential hot spots. Pre-cooling of the hydrogen was found to be essential in most cases, as ambient conditions greatly affect the need for a pre-cooling to achieve the 45-minute fill time. Pre-cooling cannot be supplied by nearby water, such as that found in nature (bays, lakes, rivers, etc.) because pre-cooling cooling below 0 °C was found to be necessary to avoid excessive compression heating. The experimental results afforded a calibration of the engineering model (SOFIL) for these large 250-bar tanks, which now enables using SOFIL to predict volume-averaged hydrogen filling temperatures to an accuracy of +/- 2.7°C for these tanks. The model can therefore be used to evaluate potential scenarios for development of a standardized fueling methodology for ferries utilizing large Type-IV tanks of the type examined here.

08 HYDROGEN↗
DOE OSTI2024

Reinforcement Learning Control for Enhancing Marine Hydrokinetic Turbine Energy Generation

This paper proposes a reinforcement learning-based method to maximize power generation for a direct-drive marine hydrokinetic turbine. A high levelized cost of energy (LCOE) is preventative in the widespread adoption of many marine energy conversion technologies. A straightforward way to reduce LCOE is to increase conversion efficiency and ensure maximum energy generation. The proposed method utilizes a damping control methodology, varying applied generator torque via a linear relationship between the applied damping coefficient and rotor speed. A state-action-reward-state-action (SARSA) algorithm has been used to learn the optimal control action for a given flow velocity. The proposed SARSA methodology uses Gaussian radial basis functions to create a three-dimensional surface to estimate the relationship between damping coefficient, incoming flow velocity, and coefficient of power (C p ). Here, the SARSA algorithm was compared against a baseline optimal tip speed ratio controller over a year-long flow velocity case profile while considering the effects of biofouling on the turbine system, where the proposed RL method generated 0.92% more energy than the baseline.

Damp↗
DOE OSTI2024

Godzilla mineral dust and La Soufrière volcanic ash fallout immediately stimulate marine microbial phosphate uptake

During the “Godzilla” dust storm of June 2020, unusually high fluxes of mineral dust traveled across the Atlantic from the Sahara Desert, reaching the Caribbean Basin, Gulf Coast, and southeastern United States. Additionally, an eruption of the La Soufrière volcano on St. Vincent in April 2021 generated substantial ashfall in the southeastern Caribbean. While many studies have analyzed mineral dust’s ability to relieve nutrient limitation of phosphorus (P) in the P-stressed North Atlantic, less is known about the impact of extreme events and other natural aerosols on fluxes of P into seawater and from seawater into marine microbial cells. We quantified P and iron (Fe) content in mineral dust from the Godzilla dust storm and volcanic ash from the La Soufrière eruption collected at Ragged Point, Barbados. We also performed seawater incubations to assess the marine microbial response to aerosol deposition. Using environmentally-relevant concentrations of atmospheric particles for within the ocean’s mixed layer allowed us to draw realistic conclusions about how these deposition events impacted P cycling in situ. Volcanic ash has lower P content than mineral dust, and P in volcanic ash is far less soluble (~1%) than assumed in current atmospheric deposition models. Adding mineral dust and the volcanic ash leachate in concentrations representing different deposition scenarios increased soluble reactive phosphorus (SRP) concentrations in coastal seawater by ~7-32 nM. Phosphate uptake rate was stimulated in coastal seawater after either mineral dust or volcanic ash deposition at aerosol concentrations relevant to the Godzilla dust event, with ash eliciting the fastest uptake rate. Furthermore, high concentrations of both the mineral dust and volcanic ash led to slightly elevated alkaline phosphatase activity (APA) compared to the relevant controls, indicating higher potential for use of dissolved organic phosphorus (DOP) as a P source. Quantifying these aerosols’ impacts on P cycling is a significant step towards achieving a better understanding of their potential roles in relieving nutrient limitation and fueling the biological carbon pump.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Mesoscale Linear Elastic Modeling and Homogenization of Marine Energy Composites

The design of fiber-reinforced composite (FRC)-based components for marine energy applications necessitates a fundamental understanding of material properties and the resulting geometry to predict long-term performance. In this work, we present a modeling workflow to predict linear elastic and diffusive bulk properties at the mesoscale for an idealized geometry based on knowledge of fiber and resin properties. A parametric study was performed to identify the key model input parameters that influence bulk properties. Furthermore, we demonstrate how bulk properties can be leveraged in high-fidelity image-based simulations, where imperfections in tow geometry and voids captured during X-ray computed tomography imaging are explicitly represented within the simulation. Bulk properties of interest include moduli, Poisson’s ratios, hygroscopic swelling, diffusivity, and moisture uptake, which are key parameters for characterizing FRC performance within marine environments. Modeling predictions agreed well with experimental data, except for estimating swelling coefficients, likely due to crack accumulation as a function of moisture uptake. The mesoscale modeling workflow ultimately highlights a versatile framework for understanding the influence of material and geometric properties, which can be leveraged to rapidly assess new FRC-based components.

computational mechanics↗
DOE OSTI2020

Low Molecular Weight Volatile Organic Compounds Indicate Grazing by the Marine Rotifer Brachionus plicatilis on the Microalgae Microchloropsis salina

Microalgae produce specific chemicals indicative of stress and/or death. The aim of this study was to perform non-destructive monitoring of algal culture systems, in the presence and absence of grazers, to identify potential biomarkers of incipient pond crashes. Here, we report ten volatile organic compounds (VOCs) that are robustly generated by the marine alga, Microchloropsis salina, in the presence and/or absence of the marine grazer, Brachionus plicatilis. We cultured M. salina with and without B. plicatilis and collected in situ volatile headspace samples using thermal desorption tubes over the course of several days. Data from four experiments were aggregated, deconvoluted, and chromatographically aligned to determine VOCs with tentative identifications made via mass spectral library matching. VOCs generated by algae in the presence of actively grazing rotifers were confirmed via pure analytical standards to be pentane, 3-pentanone, 3-methylhexane, and 2-methylfuran. Six other VOCs were less specifically associated with grazing but were still commonly observed between the four replicate experiments. Through this work, we identified four biomarkers of rotifer grazing that indicate algal stress/death. This will aid machine learning algorithms to chemically define and diagnose algal mass production cultures and save algae cultures from imminent crash to make biofuel an alternative energy possibility.

headspace sampling↗
DOE OSTI2020

Large contribution of organics to condensational growth and formation of cloud condensation nuclei (CCN) in the remote marine boundary layer

Marine low clouds strongly influence global climate, and their radiative effects are particularly susceptible to the concentration of cloud condensation nuclei (CCN). One major source of CCN is the condensational growth of pre-CCN particles, and sulfate has long been considered the major condensing species in the remote marine boundary layer. While some studies have suggested that secondary organic species can contribute to particle growth, its importance remains unclear. Here we present the first long-term observational evidence that organics play an important role in particle growth over remote oceans. To the contrary of traditional thinking, sulfate dominated condensational growth for only a small (~18 %) fraction of the 62 observed growth events, even fewer than the organic-dominated events (24 %). During most (58 %) growth events, the major condensing species included both organics and sulfate. Potential precursors of the secondary organics are volatile organic compounds from ocean biological activities and those produced by the air–sea interfacial oxidation. Our results indicate that the condensation of secondary organics contributes strongly to the growth of pre-CCN particles and thereby the CCN population over remote oceans.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Impacts of long-range transport of aerosols on marine-boundary-layer clouds in the eastern North Atlantic

Vertical profiles of aerosols are inadequately observed and poorly represented in climate models, contributing to the current large uncertainty associated with aerosol–cloud interactions. The US Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Aerosol and Cloud Experiments in the Eastern North Atlantic (ACE-ENA) aircraft field campaign near the Azores islands provided ample observations of vertical distributions of aerosol and cloud properties. Here we utilize the in situ aircraft measurements from the ACE-ENA and ground-based remote-sensing data along with an aerosol-aware Weather Research and Forecast (WRF) model to characterize the aerosols due to long-range transport over a remote region and to assess their possible influence on marine-boundary-layer (MBL) clouds. The vertical profiles of aerosol and cloud properties measured via aircraft during the ACE-ENA campaign provide detailed information revealing the physical contact between transported aerosols and MBL clouds. The European Centre for Medium-Range Weather Forecasts Copernicus Atmosphere Monitoring Service (ECMWF-CAMS) aerosol reanalysis data can reproduce the key features of aerosol vertical profiles in the remote region. The cloud-resolving WRF sensitivity experiments with distinctive aerosol profiles suggest that the transported aerosols and MBL cloud interactions (ACIs) require not only aerosol plumes to get close to the marine-boundary-layer top but also large cloud top height variations. Based on those criteria, the observations show that the occurrence of ACIs involving the transport of aerosol over the eastern North Atlantic (ENA) is about 62 % in summer. For the case with noticeable long-range-transport aerosol effects on MBL clouds, the susceptibilities of droplet effective radius and liquid water content are -0.11 and +0.14, respectively. When varying by a similar magnitude, aerosols originating from the boundary layer exert larger microphysical influence on MBL clouds than those entrained from the free troposphere.

54 ENVIRONMENTAL SCIENCES↗