Search NASA⌕ Search

SEARCH · Search NASA

Results for “point defect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Thermodynamics of Tritium Trapping by Point Defects in Intermetallic Al 12 (TM) 2.35 Aluminide Coating Phase

Density functional theory simulations have been carried out to investigate the potential for tritium trapping by metal vacancies in intermetallic Al 12 (TM) 2.35 phase (TM = Fe, Cr, and Ni) as function of temperature and tritium partial pressure. It was found that tritium could be favorably trapped by Fe and Ni vacancies and not favorably trapped by Al and Cr vacancies. However, due to the presence of partially occupied Al sites in bulk Al 12 (TM) 2.35 , leading to the approximate number of ~255 Al atoms in the unit cell, 86 sites were found energetically favorable to the creation of an Al vacancy. While adding a tritium atom in an Al vacancy is not energetically favorable, the tritiated defect still has a negative Gibbs free energy because the energy gain for creating an Al vacancy overcome the energy cost of adding the tritium species. Based on the calculated Gibbs free energy, the first tritiation of a metal vacancy, at conditions relevant to in-reactor operations, should be more favorable for Al, followed Fe, Ni, and Cr vacancies. By comparing the behavior of tritium in Al 12 (TM) 2.35 with previously studied Fe-Al coating phases (i.e., FeNiAl 5 , Fe 4 Al 13 , and Fe 2 Al 5.6 ), we found that there is a correlation between interstitial tritium solubility and the potential for vacancy trapping. The current trend suggests that if the insertion of an interstitial tritium cost more than 0.3 eV, then trapping by metal vacancies should be preferred. By combining the simulations results obtained to date, we noticed different trapping mechanisms of tritium in the Al coating. Tritium is mostly trapped by Fe and Ni vacancies in the outer Fe-Al coating phase Al 12 (TM) 2.35 while tritium should be preferentially trapped by Al and Fe vacancies for the inner Fe-Al coating phases (FeNiAl 5 , Fe 4 Al 13 , Fe 2 Al 5.6 ). Altogether, these studies show that tritium interacts differently with the various Fe-Al aluminide phases, they also suggest that tritium trapping and retention could be more efficient if metal defects are present and if the solubility of interstitial tritium in the different phases is low.

36 MATERIALS SCIENCE↗

Thermodynamics of Tritium Trapping by Point Defects at Interfacial Cr-based Phases of the Al Coating

Density functional theory (DFT) simulations have been carried out to evaluate the potential for tritium trapping by metal vacancies in four phases Cr-containing phases (i.e., Cr3Si, Al0.3Cr0.7, Al8Cr5-HT, and Al8Cr5) identified near the interface between the Al coating and 316 stainless steel (316 SS) cladding. In addition, an ab initio thermodynamics approach has been employed to predict the temperature and T2-partial pressure dependence on the thermodynamics of singly tritiated defects. Key results in this work suggest that metal vacancies in the four phases have the potential to favorably trap tritium species, especially Si vacancies in Cr3Si phase. This overall thermodynamic trend can be correlated to the energy cost of having an interstitial tritium in the lattice, which has been calculated to range from 0.17 eV in Al8Cr5-HT to 0.89 eV in Cr3Si. A comparison of the results from this study with previous theoretical works investigating tritium behavior in other Fe-Al phases identified in the aluminide coating, suggests that metal vacancies are generally able to trap tritium in various Fe-Al aluminide phases. Especially, it was found that Si and Al vacancies would be the most efficient to trap for tritium, followed by Cr vacancies, then Fe and Ni vacancies. In the four Cr-based material phases investigated in this work, it is interesting to note that, in the absences of Fe or Ni species, strong interactions between tritium and the metal vacancies are always occurring by the formation of preferential Cr—T bonds (i.e., no Si—T or Al—T bonds were formed).

Sassi, Michel J.↗

The Influence of Grain Boundaries on Radiation-Induced Point Defect Production in Materials: A Review of Atomistic Studies

Radiation-induced defects cause severe degradation of materials properties during irradiation that can ultimately cause the material to fail. Consequences of these defects include swelling, embrittlement, and undesirable phase transformations. Nanocrystalline materials, which contain a high density of grain boundaries, have demonstrated enhanced radiation tolerance compared to large grain counterparts under certain conditions. This is because, as has long been recognized, grain boundaries can serve as defect sinks for absorbing and annihilating radiation-induced defects. Increasingly, researchers have examined how grain boundaries influence the direct production of defects during collision cascade, the origin of the radiation-induced defects. In this review article, we analyze the computational studies in this area that have been performed during the past two decades. These studies examine defect production near grain boundaries in metallic, ionic, and covalent systems. It is found that, in most systems, grain boundaries absorb more interstitials than vacancies during the defect production stage. While this is generically true of most boundaries, the detailed interaction between defects and grain boundaries does depend on boundary atomic structure, the stress state near the boundary, cascade-boundary separation, and materials properties. Furthermore, the defect distribution near boundaries is qualitatively different from that in single crystals, with the former often exhibiting larger vacancy clusters and smaller interstitial clusters than the latter. Finally, grain boundaries that are damaged after cascades have occurred exhibit different interaction behavior with defects than their pristine counterparts. Together, these atomistic simulation results provide useful insight for both developing higher-level modeling of defect evolution at long timescales and how interfaces influence radiation damage evolution.

36 MATERIALS SCIENCE↗

Influence of grain boundary character on point defect formation energies in BCC Fe

The objective of this research is to understand how grain boundary character influences formation of vacancies and interstitials to grain boundaries in BCC Fe. In this study, molecular statics simulations were used to obtain a large number of minimum energy grain boundary structures in the <100> and <110> symmetric tilt grain boundary system. Then, simulations were used to calculate the formation energies associated with vacancies and self-interstitial atoms at atomic positions within 20 Angstroms of the boundary. As a first analysis, the vacancy formation energies are examined here. The simulation results show how the vacancy formation energies are influenced by grain boundary structure. Low angle boundaries are found to be an effective sink for vacancies along planes adjacent to grain boundary dislocations, while high angle low sigma grain boundaries are less effective sinks for vacancies. The grain boundary sink strength is postulated to depend upon the minimum vacancy formation energy and the influence of grain boundary character on this is shown. Interestingly, low sigma boundaries in the <100> symmetric tilt grain boundary system have higher minimum vacancy formation energies, while this quantity does not seem to be influenced by misorientation angle or grain boundary energy. The significance of this research is that atomistic simulations of this kind may ultimately help inform damage evolution via grain boundaries in multiscale models for irradiated materials as well as its implications for grain boundary engineering.

BCC Fe↗