Search NASA⌕ Search

SEARCH · Search NASA

Results for “17 - WIND ENERGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Hydrodynamic Modeling of Stratification and Mixing in a Shallow, Tropical Floodplain Lake

Abstract Floodplain lakes are widespread and ecologically important throughout tropical river systems, however data are rare that describe how temporal variations in hydrological, meteorological and optical conditions moderate stratification and mixing in these shallow lakes. Using time series measurements of meteorology and water‐column temperatures from 17 several day campaigns spanning two hydrological years in a representative Amazon floodplain lake, we calculated surface energy fluxes and thermal stratification, and applied and evaluated a 3‐dimensional hydrodynamic model. The model successfully simulated diel cycles in thermal structure characterized by buoyancy frequency, depth of the actively mixing layer, and other terms associated with the surface energy budget. Diurnal heating with strong stratification and nocturnal mixing were common; despite considerable heat loss at night, the strong stratification during the day meant that mixing only infrequently extended to the bottom at night. Simulations indicated that the diurnal thermocline up and downwelled creating lake‐wide differences in near‐surface temperatures and mixing depths. Infrequent full mixing creates conditions conducive to anoxia in these shallow lakes given their warm temperatures.

Environmental Sciences & Ecology↗
DOE OSTI2022

Tin removal by an annular surface wave plasma antenna in an extreme ultraviolet lithography source

Tin contamination of the collector mirror surface remains one of the crucial issues of EUV (Extreme Ultraviolet) sources, directly impacting the availability of the tool. Hydrogen plasma-based tin removal processes employ hydrogen radicals and ions to interact with tin deposits to form gaseous tin hydride (SnH 4 ), which can be removed through pumping. An annular surface wave plasma (SWP) source developed at the University of Illinois—Urbana Champaign is integrated into the cone and perimeter of the collection mirror for in situ tin removal. The SWP is characterized by high ion and radical densities, low electron temperature, and local generation where etching is needed. This method has the potential to significantly reduce downtime and increase mirror lifetime. Radical probe measurements show hydrogen radical densities in the order of 10 19 m -3 , while Langmuir probe measurements show electron temperatures of up to 6 eV and plasma densities on the order of 10 17–18 m -3 . The generated ions are essential to the tin cleaning and have sufficiently low energy to cause no damage to the collector capping layer. Tin etch rates of up to 270 nm/min were observed in a variety of experimental conditions, including various powers, pressures, flowrates, and temperatures. In conclusion, the high etch rates demonstrated in this study exceed the expected contamination rate of the EUV source.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2003

Performance of the CELSS Antarctic Analog Project (CAAP) crop production system

Regenerative life support systems potentially offer a level of self-sufficiency and a decrease in logistics and associated costs in support of space exploration and habitation missions. Current state-of-the-art in plant-based, regenerative life support requires resources in excess of allocation proposed for candidate mission scenarios. Feasibility thresholds have been identified for candidate exploration missions. The goal of this paper is to review recent advances in performance achieved in the CELSS Antarctic Analog Project (CAAP) in light of the likely resource constraints. A prototype CAAP crop production chamber has been constructed and operated at the Ames Research Center. The chamber includes a number of unique hardware and software components focused on attempts to increase production efficiency, increase energy efficiency, and control the flow of energy and mass through the system. Both single crop, batch production and continuous cultivation of mixed crops production studies have been completed. The crop productivity as well as engineering performance of the chamber are described. For each scenario, energy required and partitioned for lighting, cooling, pumping, fans, etc. is quantified. Crop production and the resulting lighting efficiency and energy conversion efficiencies are presented. In the mixed-crop scenario, with 27 different crops under cultivation, 17 m2 of crop area provided a mean of 515 g edible biomass per day (85% of the approximate 620 g required for one person). Enhanced engineering and crop production performance achieved with the CAAP chamber, compared with current state-of-the-art, places plant-based life support systems at the threshold of feasibility. c2002 Published by Elsevier Science Ltd on behalf of COSPAR.

Lettuce/growth & development↗
NASA NTRS2010

Complex Role of Secondary Electron Emissions in Dust Grain Charging in Space Environments: Measurements on Apollo 11 and 17 Dust Grains

Dust grains in various astrophysical environments are generally charged electrostatically by photoelectric emissions with radiation from nearby sources, or by electron/ion collisions by sticking or secondary electron emissions. Knowledge of the dust grain charges and equilibrium potentials is important for understanding of a variety of physical and dynamical processes in the interstellar medium (ISM), and heliospheric, interplanetary, planetary, and lunar environments. The high vacuum environment on the lunar surface leads to some unusual physical and dynamical phenomena involving dust grains with high adhesive characteristics, and levitation and transportation over long distances. It has been well recognized that the charging properties of individual micron/submicron size dust grains are expected to be substantially different from the corresponding values for bulk materials and theoretical models. In this paper we present experimental results on charging of individual dust grains selected from Apollo 11 and Apollo 17 dust samples by exposing them to mono-energetic electron beams in the 10- 400 eV energy range. The charging rates of positively and negatively charged particles of approximately 0.2 to 13 microns diameters are discussed in terms of the secondary electron emission (SEE) process, which is found to be a complex charging process at electron energies as low as 10-25 eV, with strong particle size dependence. The measurements indicate substantial differences between dust charging properties of individual small size dust grains and of bulk materials.

Abbas, M. M.↗
NASA NTRS2012

Large Proton Anisotropies in the 18 August 2010 Solar Particle Event

The solar particle event observed at STEREO Ahead on 18 August 2010 displayeda rich variety of behavior in the particle anisotropies. Sectored rates measured by theLow Energy Telescope (LET) on STEREO showed very large bidirectional anisotropies in4 6 MeV protons for the first 17 hours of the event while inside a magnetic cloud, withintensities along the field direction several hundred to nearly 1000 times greater than thoseperpendicular to the field. At the trailing end of the cloud, the protons became isotropic andtheir spectrum hardened slightly, while the HeH abundance ratio plunged by a factor of approximatelyfour for about four hours. Associated with the arrival of a shock on 20 Augustwas a series of brief (10 minute duration) intensity increases (commonly called shockspikes) with relatively narrow angular distributions (45 FWHM), followed by an abruptdecrease in particle intensities at the shock itself and a reversal of the proton flow to a directiontoward the Sun and away from the receding shock. We discuss the STEREOLETobservations of this interesting event in the context of other observations reported in theliterature

cosmic rays solar↗
NASA NTRS2016

The ASTRO-H (Hitomi) X-Ray Astronomy Satellite

The Hitomi (ASTRO-H) mission is the sixth Japanese X-ray astronomy satellite developed by a large international collaboration, including Japan, USA, Canada, and Europe. The mission aimed to provide the highest energy resolution ever achieved at E greater than 2 keV, using a microcalorimeter instrument, and to cover a wide energy range spanning four decades in energy from soft X-rays to gamma-rays. After a successful launch on 2016 February 17, the spacecraft lost its function on 2016 March 26, but the commissioning phase for about a month provided valuable information on the on-board instruments and the spacecraft system, including astrophysical results obtained from first light observations. The paper describes the Hitomi (ASTRO-H) mission, its capabilities, the initial operation, and the instruments/spacecraft performances confirmed during the commissioning operations for about a month.

Hard X-ray↗
DOE OSTI2024

Gas Stopper Developments for Improved Purity and Intensity of Low-Energy, Rare Isotope Ion Beams (Final Technical Report)

This final technical report summarizes the work of the Michigan State University (MSU) team supported by grant # DE-SC0021423 awarded by the Office of Nuclear Physics, Department of Energy. Objectives: The successful fulfillment of the FRIB science mission hinges on ensuring the availability of fast, stopped, and reaccelerated beams consisting of rare isotopes. This project's research and development focus was dedicated to supporting the advancement and creation of a cutting-edge linear gas stopper. The primary aim is to efficiently convert the high-intensity fast beams of rare isotopes provided by FRIB into high-quality, low-energy beams. These beams are essential for conducting stopped beam experiments or for subsequent reacceleration. The overarching goal is to advance technology, aiming to increase the beam rate capability of the linear gas stopper for medium-to-heavy-mass rare isotopes by more than tenfold compared to the currently most effective gas stopper in operation, and to improve the purity of the delivered beams. Project Description: The existing technology employed in gas stopping devices designed for low-energy, rare-isotope beams presents limitations in both the purity of extracted beams and the intensities of injected beams. These limitations are incompatible with the requirements of the recently commissioned rare isotope beam facility, FRIB. Our research and development efforts, aligned with the previously outlined objectives, focused on addressing the most critical aspects for enhancing beam-rate capability and purity. Specifically, advanced particle-in-cell simulations were developed and integrated into a simulation pipeline to explore the efficacy of multi-layer RF carpets on increasing ion transport efficiency with high incoming beam rates that generate space charge fields which can limit it. We also explored the possibility of using a collision-induced-dissociation (CID) gas cell to break up molecular contaminant ions that are generated during the stopping process. A prototype CID gas cell was constructed and tested with beams from an offline ion source, validating the concept with the successful demonstration of breaking of molecular ions. The outcome of this research enabled the formulation a conceptual design for a next-generation linear gas stopping device specifically tailored for FRIB. This device is envisioned to deliver rare-isotope-ion beams at a rate of 10 8 particles per second or higher, accompanied by advancements in purity. Methods employed: This project leverages advancements in technologies initially designed for the Advanced Cryogenic Gas Stopper (ACGS), the current state-of-the-art linear gas stopper, through the use of new simulations and beam purification via collision-induced-dissociation. The methods include: 1. Development of a prototype low-energy, low-pressure CID gas stopper. This prototype features a thin, approximately 20 nm, Si 3 N 4 entrance window designed for dissociating stable and rare-isotope molecular ions. The goal is to enhance beam purification and overall efficiency. 2. Creation of Particle-in-cell (PIC) simulations to assess the advantages of multi-layer RF carpets and multi-point extraction for ion transport efficiency. These simulations rely on the 3DCylPIC package, specifically designed for studying devices of this nature. The goal is to quantify and mitigate ion transport losses due to space charge generated in the stopping process of large numbers of ions. 3. Perform ion transport simulations across an RF carpet using an 8-phase travelling wave and evaluate its performance. Compared to the 4-phase RF carpets used in ACGS, the 8-phase carpets will double the wavelength of the generated traveling wave allowing for larger maximum RF amplitudes that could result in improved ion transport efficiency for high-intensity incoming beams when large space charge fields are present. Impact: Tackling the primary challenges associated with transforming high-energy projectile fragment beams into low-energy beams—specifically, addressing efficiency and purity—holds significant promise for advancing FRIB science. This advancement will particularly impact precision mass measurements, laser spectroscopy of short-lived nuclei, and studies in astrophysics and nuclear reactions using reaccelerated beams. These domains play a crucial role in addressing key questions outlined in the 2023 NSAC long-range plan, spanning nuclear structure, nuclear astrophysics, and fundamental symmetries. Additionally, they contribute to addressing 10 out of the 17 benchmarks identified by the NRC RISAC. The development of a next-generation gas stopping device capable of delivering low-energy, rare-isotope beams at a rate of 10 8 particles per second, or more, with high purity holds the potential to unlock experiments that would otherwise be unfeasible. Furthermore, it is expected to reduce the time required for experiments at FRIB, thereby maximizing scientific output. The research and development activities performed as part of this project bolstered essential competencies at FRIB in beam physics and ion source technologies, provided valuable training opportunities for junior scientists.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Assessment of the quality of nuclear data for stable oxygen isotopes for Intentional Forensics applications

The Intentional Forensics (IF) project seeks to design a suite of tagging materials that can be used to unobtrusively “barcode” nuclear fuel. The idea being that, if the fuel leaves institutional controls and is later recovered, the “barcode” can be used to determine the provenance of the fuel. The IF project is investigating several schemes for this “barcode” and taggants with tailored isotopic compositions are once leading concept. Recently 18 O was suggested as a potential taggant [IF2023]. This report assesses the quality of 16,17,18 O evaluations in the ENDF/B-VIII.0 library [ENDF8.0]. In a neutron-rich environment such as a nuclear reactor, we are interested in two main processes – neutron scattering and neutron absorption (or capture). For the typical neutron energies encountered in a reactor, absorption is determined exclusively by the neutron radiative capture cross section (in which a neutron is absorbed, and the residual nucleus emits one or more gamma rays). The capture cross sections are described by and can be completely determined from R-matrix parameters in the ENDF evaluations. Therefore, it is sufficient to consider the quality of the neutron resonance part of these evaluations. Neutron scattering is determined mainly by the elastic scattering cross section which is very similar for all oxygen isotopes and is essentially constant until around 100 keV. The cross section varies from 3-4 barns, depending on the isotope, and 16 O has the largest elastic cross section of all isotopes. Therefore, we expect that significant amounts of 17 O and 18 O could diminish the moderating role of oxygen in fuel. We note that, in traditional power reactor, the hydrogen in the coolant water provides the vast majority of the moderation in the reactor, so the impact of 17 O and 18 O in any taggant would be minimal. At higher energies, neutron resonances start to play a role and the R-matrix parameters determine the cross sections. Fig. 1 shows the mass region near stable oxygen isotopes. As nuclei capture neutrons, they transmute into a different isotope, one unit to the right. In particular, 16 O transmutes to 17 O, 17 O transmutes to 18 O and 18 O transmutes to 19 O. 19 O, being unstable, beta decays in 27 s to 19 F. So, even if the 18 O neutron capture data is good, the fact that it transmutes into 19 F may be problematic and needs investigation. Fig. 2 from [NuDat] shows the thermal neutron capture cross sections for all nuclei in the ENDF/B-VII.1 library [ENDF7.1]. Clearly oxygen thermal capture values are quite small compared to other nuclei. Note, there is no 18 O evaluation in the ENDF/B-VII.1 library. In any event, given that neutron capture events lower the reactor reactivity and potentially induce chemical changes in the fuel, we will focus our attention on the capture part of the neutron resonances.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1980

Observations of energetic ions and electrons in Saturn's magnetosphere

Observations of the magnetosphere of Saturn made by the cosmic-ray experiment on board Pioneer 11 are summarized. Detailed energy spectra and angular distributions of protons from 0.2 to 22 MeV and electrons from 0.1 to 2 MeV were obtained, together with measurements of helium nuclei between 0.65 and 22 MeV/n. The time histories of proton and electron data suggest a division of the Saturn magnetosphere into three regions: (1) an outer magnetosphere between 17 and 7.5 Saturn radii, which is characterized by monotonically increasing fluxes and spectral hardening inward from the magnetosphere, with large changes in low-energy electron angular distributions; (2) a slot region between 7.5 and 4 Saturn radii where marked decreases in proton and low-energy electron fluxes are observed, apparently due to the presence of Dione, Tethys and Enceladus; and (3) an inner region between 4 Saturn radii and the ring edge, which exhibits sharp increases in proton fluxes with energies up to 20 MeV, which are broken near the orbits of Mimas, Janus and possibly S 11. A sharp cutoff of proton and electron fluxes is observed just beyond the nominal edge of the A ring.

Trainor, J. H.↗
DOE OSTI2022

AMX – the highly automated macromolecular crystallography (17-ID-1) beamline at the NSLS-II

The highly automated macromolecular crystallography beamline AMX/17-ID-1 is an undulator-based high-intensity (>5 × 10 12 photons s −1 ), micro-focus (7 µm × 5 µm), low-divergence (1 mrad × 0.35 mrad) energy-tunable (5–18 keV) beamline at the NSLS-II, Brookhaven National Laboratory, Upton, NY, USA. It is one of the three life science beamlines constructed by the NIH under the ABBIX project and it shares sector 17-ID with the FMX beamline, the frontier micro-focus macromolecular crystallography beamline. AMX saw first light in March 2016 and started general user operation in February 2017. At AMX, emphasis has been placed on high throughput, high capacity, and automation to enable data collection from the most challenging projects using an intense micro-focus beam. Here, the current state and capabilities of the beamline are reported, and the different macromolecular crystallography experiments that are routinely performed at AMX/17-ID-1 as well as some plans for the near future are presented.

36 MATERIALS SCIENCE↗
NASA NTRS1984

HEAO 1 high-energy X-ray observations of three bright transient X-ray sources H1705-250 (Nova Ophiuchi), H1743-322, and H1833-077 (Scutum X-1)

The bright X-ray transients H1705-250 (Nova Ophiuchi) and H1743-322 in the energy range 12-180 keV were observed, and the presence of high-energy spectral components was revealed. On the basis of X-ray spectra in the 1-10 keV range, transients are classified as 'soft' (kT = 4 keV) or 'hard' (kT = 17 keV); and both H1705-250 and H1743-322 should be in the 'soft' category. Data have been reexamined for the archetypal 'soft' transient A0600-00 taken by the SAS 3 satellite, but no evidence is found there for a high-energy spectral component. Thus consideration of a wider X-ray energy range makes the 'hard'/'soft' distinction between X-ray transients much less clear.

Cooke, B. A.↗
DOE OSTI2024

Adoption Readiness Level Assessment of Redox Flow Batteries

Adoption readiness levels (ARLs) were developed by the Department of Energy’s Office of Technology Transitions (OTT) to holistically capture barriers to market adoption for a technology. The framework consists of 17 risk dimensions falling into 4 broad categories: Value Proposition, Market Acceptance, Resource Maturity, and License to Operate. OTT’s Commercial Adoption Readiness Assessment Tool (CARAT) can be used to evaluate a technology’s ARL. This work applies CARAT to redox flow batteries to evaluate the level of risk for this technology class across the 17 dimensions. Redox flow batteries were found to bear 1-2 high risk dimensions, 10-11 medium risk dimensions, 5 low risk dimensions, and scored an overall low readiness on the CARAT scoring scale (ranges reflect variation with flow battery chemistry). Herein, we describe the factors and evaluation across the dimensions leading to this score for redox flow batteries.

25 ENERGY STORAGE↗
DOE OSTI2024

Experimental Determination of 𝛼 Widths of 21 Ne Levels in the Region of Astrophysical Interest: New 17 O +𝛼 Reaction Rates and Impact on the Weak 𝑠 Process

The efficiency of the weak 𝑠 process in low-metallicity rotating massive stars depends strongly on the rates of the competing 17 O ⁡(𝛼,𝑛)⁢ 20 Ne and 17 O ⁡(𝛼,𝛾)⁢ 21 Ne reactions that determine the potency of the 16 O neutron poison. Their reaction rates are poorly known in the astrophysical energy range of interest for core helium burning in massive stars because of the lack of spectroscopic information (partial widths, spin parities) for the relevant states in the compound nucleus 21 Ne . In this Letter, we report on the first experimental determination of the 𝛼-particle spectroscopic factors and partial widths of these states using the 17 O ⁡( 7 Li, 𝑡)⁢ 21 Ne 𝛼-transfer reaction. With these the 17 O ⁡(𝛼, 𝑛)⁢ 20 Ne and 17 O ⁡(𝛼, 𝛾)⁢ 21 Ne reaction rates were evaluated with uncertainties reduced by a factor more than 3 with respect to previous evaluations and the present 17 O ⁡(𝛼, 𝑛)⁢ 20 Ne reaction rate is more than 20 times larger. Finally, the present (𝛼, 𝑛)/(𝛼, 𝛾) rate ratio favors neutron recycling and suggests an enhancement of the weak 𝑠 process in the Zr-Nd region by more than 1.5 dex in metal-poor rotating massive stars.

direct reactions↗
DOE OSTI2024

Field Study of 120-volt Heat Pump Water Heaters in the Big Easy

To meet long-term goals for reducing carbon emissions and lessen the impacts of climate change, the U.S. plans to decarbonize its building stock, which includes the replacement of fossil fuel-burning end uses with energy efficient electric alternatives. As part of this strategy, the replacement of fossil fuel water heaters with heat pump water heaters (HPWH) has the potential to avoid substantial carbon emissions. An estimated 10-15 million single-family homes with fossil fuel water heaters do not have the electrical panel capacity to install a 240-volt, 30-amp HPWH. For these homes, a technology recently introduced to the market, the 120-volt plug-in HPWH, can provide energy efficient electrification of water heating without an expensive panel and wiring retrofit. This paper presents the results of an ongoing 120-volt HPWH field study conducted in 17 homes in New Orleans, LA. Key installation scenarios are profiled for retrofitting from gas-fired water heaters to 120-volt HPWHs, accounting for space, air volume, air temperature, condensate drainage, and electrical. Each HPWH had its surrounding air temperature, relative humidity, inlet and outlet water temperature, flow, and energy consumption monitored. Using these data, hot water delivery and energy efficiency performance were analyzed based on home characteristics. Hot water run outs were investigated to understand how hot water usage, inlet water temperature, and surrounding air temperature impact the HPWH’s ability to meet load. From these results, best practices for 120-volt HPWH siting, sizing, and installation were developed. In addition, results are explored further to add insight for electrification policies and product development.

heat pump water heater, 120-volt, Residential buil↗
DOE OSTI2025

Elastic scattering in the 12 N + 197 Au system at 𝐸 lab = 70 MeV

Halo structure is an interesting exotic configuration developed in some light weakly bound nuclei, where a valence particle orbits a nuclear core. Signatures of halo structure can be observed in the angular distributions of the elastic scattering induced by these nuclei at energies around the Coulomb barrier. There are some well-studied reactions with neutron-rich halo nuclei, such as 6 He and 11 Li . However, the information is scarce on the proton-rich side. Recent works confirm the halo structure in the 8B nuclei but still lack more experimental studies for other proton-halo candidates, such as 12 N and 17 F. In this work, we report experimental data for the elastic scattering of 12 N on 197 Au target at 𝐸 lab = 70 MeV. The 12 N is a proton-rich nucleus with proton separation energy 𝑆 𝑝 = 600 keV, which is higher than the 8 B (𝑆 𝑝 = 137 keV) and almost the same as the 17 F (𝑆 𝑝 = 601 keV). Data were obtained at the Cyclotron Institute of Texas A&M University where the 12 N radioactive beam was produced by the momentum achromatic recoil spectrometer. The calculation of the optical model was used to fit the measured angular distribution for the elastic scattering and to obtain the reaction cross section 𝜎 𝑅 . We also performed continuum discretized coupled-channel calculations to compare with the experimental data. The angular distribution of the elastic cross sections exhibits a suppression of the Fresnel peak. From the fitting of the optical model, we obtain the total reaction cross section, 𝜎 𝑅 = 1269 ± 41 mb. The agreement between the CDCC calculation and the experimental elastic scattering data is limited and the breakdown does not exhaust the measured 𝜎 𝑅 . The resulting reduced reaction cross section 𝜎 Red for 12 N + 197 Au is large and comparable to the one obtained for the 8 B + 208 Pb system. This suggests a strong decoupling of the valence proton from the core because of the low binding energy and a dynamic polarization effect. Here, more research is required to estimate the contribution of core excitation.

Elastic scattering reactions↗
DOE OSTI2021

Proximity to a critical point driven by electronic entropy in URu2Si2

Abstract The strongly correlated actinide metal URu 2 Si 2 exhibits a mean field-like second order phase transition at T o ≈ 17 K, yet lacks definitive signatures of a broken symmetry. Meanwhile, various experiments have also shown the electronic energy gap to closely resemble that resulting from hybridization between conduction electron and 5 f -electron states. We argue here, using thermodynamic measurements, that the above seemingly incompatible observations can be jointly understood by way of proximity to an entropy-driven critical point, in which the latent heat of a valence-type electronic instability is quenched by thermal excitations across a gap, driving the transition second order. Salient features of such a transition include a robust gap spanning highly degenerate features in the electronic density of states, that is weakly (if at all) suppressed by temperature on approaching T o , and an elliptical phase boundary in magnetic field and temperature that is Pauli paramagnetically limited at its critical magnetic field.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Nature of the galaxies on top of quasars producing Mg ii absorption

ABSTRACT Quasar–galaxy pairs at small separations are important probes of gas flows in the disc–halo interface in galaxies. We study host galaxies of 198 Mg ii absorbers at 0.39 ≤ zabs ≤ 1.05 that show detectable nebular emission lines in the Sloan Digital Sky Survey (SDSS) spectra. We report measurements of impact parameter (5.9 ≤ D [kpc] ≤ 16.9) and absolute B-band magnitude (−18.7 ≤ MB ≤ −22.3 mag) of host galaxies of 74 of these absorbers using multiband images from the Dark Energy Spectroscopic Instrument (DESI) Legacy Imaging Survey, more than doubling the number of known host galaxies with D ≤ 17 kpc. This has allowed us to quantify the relationship between Mg ii rest equivalent width (W2796) and D, with best-fitting parameters of W2796 (D = 0) = 3.44 ± 0.20 Å and an exponential scale length of 21.6$^{+2.41}_{-1.97}\, \mathrm{ kpc}$. We find a significant anticorrelation between MB and D, and MB and W2796, consistent with the brighter galaxies producing stronger Mg ii absorption. We use stacked images to detect average emissions from galaxies in the full sample. Using these images and stacked spectra, we derive the mean stellar mass (9.4 ≤ log(M*/M⊙) ≤ 9.8), star formation rate (2.3 ≤ SFR [M⊙ yr−1] ≤ 4.5), age (2.5–4 Gyr), metallicity (12 + log(O/H) ∼ 8.3), and ionization parameter (log q [cm s−1] ∼ 7.7) for these galaxies. The average M* found is less than that of Mg ii absorbers studied in the literature. The average SFR and metallicity inferred are consistent with that expected in the main sequence and the known stellar mass–metallicity relation, respectively. High spatial resolution follow-up spectroscopic and imaging observations of this sample are imperative for probing gas flows close to the star-forming regions of high-z galaxies.

Astronomy & Astrophysics↗
DOE OSTI2023

Many-body expansion for light nuclear systems

Here we extend the many-body expansion (MBE), previously applied to hydrogen bonded and molecular systems, to the light nuclear systems 3 H and 3 He by considering the nucleonic degrees of freedom as fundamental in the expansion. The analysis is based on the Pauli nucleonic dynamics (PND) model, a simple antisymmetrized dynamical code, inspired by the sophisticated constrained molecular dynamics (CoMD) model. The total energy of the 2 H nucleus is calculated with this model at -2.312 MeV, which is within 4% of the experimental value of -2.225 MeV. The application of the MBE yields results for the three-body term in the 3 H nucleus that is comparable with previous estimates, while it is reported for the first time for the nucleus of 3 He . The energies of 3 H and 3 He that include the sum of the one- and two-body terms with the model are - 6.97 ± 0.21 MeV and - 6.19 ± 0.21 MeV and the three-body terms, estimated from the difference of the sum of the one- and two-body terms from the experimentally measured energies, are -1.51 ± 0.21 MeV and -1.53 ± 0.21 MeV, respectively. The MBE for the 3 H and 3 He nuclei is qualitatively similar to the one previously reported for the water trimer: the two- and three-body terms are negative with the latter amounting to ~3% of the former. Additionally, the three-body terms correspond to about 16–23% of the total energy of the bound systems, a percentage that is also comparable to the one in the water trimer (17%). In this manner, the MBE analysis can be applied to light nuclear systems following the same protocol as the one that has been previously extensively used for hydrogen bonded molecular systems.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗