Search NASA⌕ Search

SEARCH · Search NASA

Results for “Composition B”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Comparative investigation on microstructures and mechanical properties of (TiB + TiC)/Ti-6Al-4V composites from Ti-B4C-C and Ti-TiB2-TiC systems

Highlights: • The (TiB{sub w}+TiC{sub p})/Ti-6Al-4V composites were fabricated from Ti-B{sub 4}C-C and Ti-TiB{sub 2}-TiC systems by reactive hot-pressed sintering. • Microstructures and mechanical properties of the two kinds of composites were comparatively investigated. • The composites from Ti-TiB{sub 2}-TiC system possess higher elastic modulus and Vickers hardness than those from Ti-B{sub 4}C-C system. • The composites from Ti-TiB{sub 2}-TiC system have higher bending strength than the other system while employing same conditions. • The composites from Ti-B{sub 4}C-C system present better abrasion resistance than those from Ti-TiB{sub 2}-TiC system. - Abstract: Two percentages of TiB + TiC reinforced Ti-6Al-4V composites from Ti-B{sub 4}C-C and Ti-TiB{sub 2}-TiC systems were fabricated by reactive hot-pressed sintering. Their microstructures and mechanical properties involving elastic modulus, Vickers hardness, bending strength and wear property were investigated comparatively. The experimental results show that needle-like TiB whiskers and near-equiaxed TiC particles are evenly distributed in the Ti-6Al-4V matrix. The mechanical properties of the (TiB + TiC)/Ti-6Al-4V composites are closely related with the nominal composition and synthesis system of TiB + TiC reinforcement and the microstructures of composites. With increasing the nominal volume fraction of reinforcement, both elastic modulus and Vickers hardness increase more or less and the bending strength decreases in varying degrees. A certain increase of pores in the composites with the sintering temperature increasing to 1300 °C can markedly affect the bending strength. Moreover, no matter what the sintering temperature and nominal volume fraction of reinforcement, the elastic modulus and Vickers hardness of composites from the Ti-TiB{sub 2}-TiC system are higher than those from the Ti-B{sub 4}C-C system. Similarly, the composites from the Ti-B{sub 4}C-C system present better abrasion resistance than those from the Ti-TiB{sub 2}-TiC system due to the difference of interfacial bonding between the TiC particles and Ti-6Al-4V matrix in the two kinds of composites.

36 MATERIALS SCIENCE↗

Frank–Kasper Phases Identified in PDMS- b -PTFEA Copolymers with High Conformational Asymmetry

In the search for the formation of Frank-Kasper phases from diblock copolymer self-assembly, a series of compositionally asymmetric poly(dimethylsiloxane)- b -poly(2,2,2-triflouroethyl acrylate)s (PDMS- b -PTFEAs) are synthesized to produce PDMS-rich phases with PDMS volume fractions ( f PDMS ) ranging from 0.746 to 0.869. As determined by small-angle X-ray scattering analysis, the Frank-Kasper sigma and C14 phases are identified at f PDMS = 0.796 and 0.851, respectively, plausibly due to high conformational asymmetry (ϵ ≈ 2.20) between the two blocks. Intriguingly, the σ phase develops during heating from a short-range liquid-like packing (LLP) state, whereas the C14 phase is achieved at room temperature, which are both followed by a disordering at higher temperatures. Finally, based on thermal experiments from a super cooled disordered state, the findings further provide compelling evidence of an LLP-hexagonally packed cylinder-σ transition and a direct pathway to the C14 phase during heating from an LLP state.

42 ENGINEERING↗

Investigation of the Effect of Injected CO 2 on the Morrow B Sandstone through Laboratory Batch Reaction Experiments: Implications for CO 2 Sequestration in the Farnsworth Unit, Northern Texas, USA

About one million tons of CO 2 have been injected into the Farnsworth unit to date. The target reservoir for CO 2 injection is the Morrow B Sandstone, which is primarily made of quartz with lesser amounts of albite, calcite, chlorite, and clay minerals. The impact of CO 2 injection on the mineralogy, porosity, and pore water composition of the Morrow B Sandstone is a major concern. Although numerical modeling studies suggest that porosity changes will be minimal, significant alterations to mineralogy and pore water composition are expected. Given the implications for CO 2 storage effectiveness and risk assessment, it is crucial to verify the accuracy of theoretical model predictions through laboratory experiments. To this end, batch reaction experiments were conducted to model conditions near an injection well in the Morrow B Sandstone and at locations further away, where the CO 2 has been diluted by formation water. The laboratory experiments involved submerging thin sections of both coarse- and fine-grained facies of the Morrow B Sandstone in formation water samples with varying levels of CO 2 . The experiments were conducted at the reservoir temperature of 75 °C. Two experimental runs were conducted, one lasting for 61 days and the other for 72 days. The initial fluid composition used in the second run was the same as in the first. The mineralogy changes in the thin sections were analyzed using SEM and the Tescan Integrated Mineral Analyzer (TIMA), while changes in the composition of the formation water were determined using ICP-AES. During each experiment, a thin layer of white fine-grained particles consisting mainly of dolomite and silica formed on the surface of the thin sections, leading to significant reductions in Ca, Mg, and Sr in the formation water. This outcome is consistent with numerical model predictions that dolomite would be the primary mineral that would react with injected CO 2 and that silica would be oversaturated in the formation water. Changes in mineral abundance in the thin sections themselves were much less systematic than in the theoretical modeling experiments, perhaps reflecting heterogeneities in the mineral grain size surface area to volume ratios and mineral distributions in the thin sections not considered in the numerical models.

58 GEOSCIENCES↗

California GAMA Special Study: Stable Isotopic Composition of Boron in Groundwater - San Diego County Domestic Well Data

The Groundwater Ambient Monitoring and Assessment (GAMA) Program is a comprehensive groundwater quality monitoring program for the state of California. Managed by the California State Water Resources Control Board (SWRCB), the goals of the Program are twofold: to improve statewide groundwater monitoring, and to increase the availability of groundwater quality information to the public. The Domestic Well Project has sampled 137 wells in San Diego County in an effort to assess the quality of these unregulated domestic use water sources. Lawrence Livermore National Laboratory (LLNL) performed isotopic analyses of domestic well water samples for the SWRCB; this study summarizes the results of measurements of the isotopic composition of dissolved boron in groundwater in 56 wells, and provides some interpretations regarding the significance of these findings. These data, in conjunction with water and nitrate isotopic composition data (Singleton et al., 2010), are useful for determining the source(s) of nitrate in potentially-contaminated San Diego County groundwater reservoirs. The isotopic composition of dissolved boron (δ 11 B) in sampled San Diego County groundwaters varies from -0.8 to +64.4 ‰. Most sampled groundwaters (44 of 56) have δ 11 B values between +20 and +50 ‰, within the isotopic composition range characteristic of animal manure. These samples tend to have high nitrate concentrations (>50 mg/L as NO 3 ) These results are consistent with isotopic composition of nitrogen in nitrate (δ 15 N) data from Singleton et al. (2010), indicating that animal manure is a primary source of nitrate in most groundwaters measured in this study. Seven samples have δ 11 B values less than +20 ‰, outside of the animal manure δ 11 B range. These groundwaters tend to have low nitrate concentrations(<10 mg/L as NO 3 ), although two have nitrate concentrations greater than 10 mg/L, suggesting that wastewater may partially contribute to their nitrate budget. No samples measured in this study have boron or nitrate isotopic compositions consistent with a mineral fertilizer nitrate source. Five sampled groundwaters have δ 11 B values greater than +50 ‰, significantly higher than any known anthropogenic boron source. More work is needed to assess the source of nitrate and boron in the greater than +50 ‰ groundwaters.

07 ISOTOPE AND RADIATION SOURCES↗

Electronic structure of Pt based topological Heusler compounds with C1{sub b} structure and 'zero band gap'

Besides of their well-known wide range of properties it was recently shown that many of the heavy Heusler semiconductors with 1:1:1 composition and C1{sub b} structure exhibit a zero band gap behavior and are topological insulators induced by their inverted band structure. In the present study, the electronic structure of the Heusler compounds PtYSb and PtLaBi was investigated by bulk sensitive hard x-ray photoelectron spectroscopy. The measured valence band spectra are clearly resolved and in well agreement to the first-principles calculations of the electronic structure of the compounds. The experimental results give clear evidence for the zero band gap state.

36 MATERIALS SCIENCE↗

Technical Considerations on MURR Control Blade Design Change and Testing using a New Metal Matrix Composite

The University of Missouri Research Reactor (MURR) is one of six research reactors, including a critical facility, that are pursuing conversion as part of a collaboration with the U.S. Department of Energy National Nuclear Security Administration Material Management and Minimization Office of Reactor Conversion and Uranium Supply, under the U.S. High Performance Research Reactors (USHPRR) conversion project. Five of the six USHPRR are planned to convert from highly enriched uranium (HEU) fuel using a low-enriched uranium (LEU) high assay monolithic alloy of uranium-10 wt% molybdenum (U-10Mo). As part of the conversion safety analysis, it is necessary to demonstrate the safety performance of the proposed core fueled with LEU as compared to the current HEU cores. The MURR reactor is planning to switch to a new control blade design that uses a metal matrix composite of boron carbide (B 4 C) and aluminum as the absorber in place of Boral®. Since MURR is expected to adopt the new metal matrix composite control blade design prior to conversion, the impact of the new blade design on the neutronics characteristics of the MURR cores for conversion are analyzed in this work through updates to incorporate the changes to the blade design in conversion models as they directly impact the LEU conversion safety analysis. The quantitative comparison shows that the neutronics and thermal hydraulic behavior of one metal matrix composite blade replacing a Boral blade is comparable for the two example MURR LEU and HEU cores states considered. Geometrical changes in the metal matrix composite blade design, combined with a 4% increase in areal boron density, showed local heating effects up to 20% higher than the Boral design. As expected, the metal matrix composite showed slightly lower heat depositions and absorber region temperatures for the LEU cases compared to HEU. Although this analysis was comparative for a single blade, maximum control blade temperatures for both Boral, metal matrix composite, and HEU/LEU remained below 100 °C, though additional analysis at a core level could differ. A qualitative irradiation behavior assessment concludes that the mechanisms that may drive swelling and blistering in the current Boral design are eased by the adoption of the metal matrix composite design. The work concludes that the two blade designs are essentially equivalent with regards to neutronics, thermal hydraulics, and expected material behavior under irradiation. However, due to the geometrical changes to the blades including redesigned and thinner cladding, new testing and increased surveillance for distortion and swelling are recommended to confirm the performance of the metal matrix composite control blade design. Where testing is completed prior to conversion, the only anticipated impacts on conversion to LEU U-10Mo fuel would be the need for models and safety analysis incorporating the metal matrix composite control blades.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

The human naive B cell repertoire contains distinct subclasses for a germline-targeting HIV-1 vaccine immunogen

Traditional vaccine development to prevent some of the worst current pandemic diseases has been unsuccessful so far. Germline-targeting immunogens have potential to prime protective antibodies (Abs) via more targeted immune responses. Success of germline-targeting vaccines in humans will depend on the composition of the human naive B cell repertoire, including the frequencies and affinities of epitope-specific B cells. However, the human naive B cell repertoire remains largely undefined. Assessment of antigen-specific human naive B cells among hundreds of millions of B cells from multiple donors may be used as pre–phase 1 ex vivo human testing to potentially forecast B cell and Ab responses to new vaccine designs. VRC01 is an HIV broadly neutralizing Ab (bnAb) against the envelope CD4-binding site (CD4bs). In this work, we characterized naive human B cells recognizing eOD-GT8, a germline-targeting HIV-1 vaccine candidate immunogen designed to prime VRC01-class Abs. Several distinct subclasses of VRC01-class naive B cells were identified, sharing sequence characteristics with inferred precursors of known bnAbs VRC01, VRC23, PCIN63, and N6. Multiple naive B cell clones exactly matched mature VRC01-class bnAb L-CDR3 sequences. Non–VRC01-class B cells were also characterized, revealing recurrent public light chain sequences. Unexpectedly, we also identified naive B cells related to the IOMA-class CD4bs bnAb. These different subclasses within the human repertoire had strong initial affinities (KD) to the immunogen, up to 13 nM, and represent encouraging indications that multiple independent pathways may exist for vaccine-elicited VRC01-class bnAb development in most individuals. The frequencies of these distinct eOD-GT8 B cell specificities give insights into antigen-specific compositional features of the human naive B cell repertoire and provide actionable information for vaccine design and advancement.

59 BASIC BIOLOGICAL SCIENCES↗

Marburg - A new pallasite.

Crystalline variation and chemical composition of meteorite found at Marburg, West Germany

METEORITIC COMPOSITION↗

Electrically coupling complex oxides to semiconductors: A route to novel material functionalities

Complex oxides and semiconductors exhibit distinct yet complementary properties owing to their respective ionic and covalent natures. By electrically coupling complex oxides to traditional semiconductors within epitaxial heterostructures, enhanced or novel functionalities beyond those of the constituent materials can potentially be realized. Essential to electrically coupling complex oxides to semiconductors is control of the physical structure of the epitaxially grown oxide, as well as the electronic structure of the interface. In this paper, we discuss how composition of the perovskite A- and B-site cations can be manipulated to control the physical and electronic structure of semiconductor—complex oxide heterostructures. Two prototypical heterostructures, Ba 1-x Sr x TiO 3 /Ge and SrZr x Ti 1-x O 3 /Ge, will be discussed. In the case of Ba 1-x Sr x TiO 3 /Ge, we discuss how strain can be engineered through A-site composition to enable the re-orientable ferroelectric polarization of the former to be coupled to carriers in the semiconductor. In the case of SrZr x Ti 1-x O 3 /Ge we discuss how B-site composition can be exploited to control the band offset at the interface. Finally, analogous to heterojunctions between compound semiconducting materials, control of band offsets, i.e., band-gap engineering, provides a pathway to electrically couple complex oxides to semiconductors to realize a host of functionalities.

36 MATERIALS SCIENCE↗

Solvent-Induced Self-Assembly Strategy to Synthesize Well-Defined Hierarchically Porous Polymers

Porous polymers with well-orchestrated nanomorphologies are useful in many fields, but high surface area, hierarchical structure, and ordered pores are difficult to be satisfied in one polymer simultaneously. A solvent-induced self-assembly strategy to synthesize hierarchical porous polymers with tunable morphology, mesoporous structure, and microporous pore wall is reported. The poly(ethylene oxide)-b-polystyrene (PEO-b-PS) diblock copolymer micelles are cross-linked via Friedel–Crafts reaction, which is a new way to anchor micelles into porous polymers with well-defined structure. Varying the polarity of the solvent has a dramatic effect upon the oleophobic/oleophylic interaction, and the self-assembly structure of PEO-b-PS can be tailored from aggregated nanoparticles to hollow spheres even mesoporous bulk. A morphological phase diagram is accomplished to systematically evaluate the influence of the composition of PEO-b-PS and the mixed solvent component on the pore structure and morphology of products. The hypercrosslinked hollow polymer spheres provide a confined microenvironment for the in situ reduction of K 2 PdCl 4 to ultrasmall Pd nanoparticles, which exhibit excellent catalytic performance in solvent-free catalytic oxidation of hydrocarbons and alcohols.

36 MATERIALS SCIENCE↗

A new structure type of RE{sub 4}B{sub 4}O{sub 11}F{sub 2}: High-pressure synthesis and crystal structure of La{sub 4}B{sub 4}O{sub 11}F{sub 2}

The first lanthanum fluoride borate La{sub 4}B{sub 4}O{sub 11}F{sub 2} was obtained in a Walker-type multianvil apparatus at 6 GPa and 1300 {sup o}C. La{sub 4}B{sub 4}O{sub 11}F{sub 2} crystallizes in the monoclinic space group P2{sub 1}/c with the lattice parameters a=778.1(2) pm, b=3573.3(7) pm, c=765.7(2) pm, {beta}=113.92(3){sup o} (Z=8), and represents a new structure type in the class of compounds with the composition RE{sub 4}B{sub 4}O{sub 11}F{sub 2}. The crystal structure contains BO{sub 4}-tetrahedra interconnected with two BO{sub 3}-groups via common vertices, B{sub 2}O{sub 5}-pyroborate units, and isolated BO{sub 3}-groups. The structure shows a wave-like modulation along the b-axis. The crystal structure and properties of La{sub 4}B{sub 4}O{sub 11}F{sub 2} are discussed and compared to Gd{sub 4}B{sub 4}O{sub 11}F{sub 2}. - Graphical abstract: A new structure type of RE{sub 4}B{sub 4}O{sub 11}F{sub 2}: high-pressure synthesis and crystal structure of La{sub 4}B{sub 4}O{sub 11}F{sub 2}.

36 MATERIALS SCIENCE↗

Investigation of chemical composition and crystal structure in sintered Ce{sub 15}Nd{sub 15}Fe{sub bal}B{sub 1} magnet

The substitution of cerium, a more abundant rare-earth element, for sintered Nd-Fe-B magnets has drawn intense interest. In the present work, nominal composition of Ce{sub 15}Nd{sub 15}Fe{sub bal}B{sub 1} (wt. %), with cerium constitutes increased to 50% of the total rare-earth content, was used. And Ce-free Nd{sub 30}Fe{sub bal}B{sub 1} (wt. %) was prepared by the same preparation process as comparison. The microstructure of the sintered magnets has been investigated by means of X-ray diffraction and transmission electron microscope. The results show that there are three kinds of RE-rich phases in the same magnet, i.e., fcc-(Ce,Nd)O{sub x} (a=0.547nm), hcp-(Ce,Nd){sub 2}O{sub 3} (a=0.386nm, c=0.604nm) and bcc-(Ce,Nd){sub 2}O{sub 3} (a=1.113nm). Ors of (140)(Ce,Nd){sub 2}Fe{sub 14}B// (1-21)bcc-(Ce,Nd){sub 2}O{sub 3}(∼3°), [001](Ce,Nd){sub 2}Fe{sub 14}B// [-214]bcc-(Ce,Nd){sub 2}O{sub 3}; (01-1)(Ce,Nd){sub 2}Fe{sub 14}B// (101)fcc- (Ce,Nd)O{sub x}(∼2°), [101](Ce,Nd){sub 2}Fe14B// [12-1]fcc-(Ce,Nd)O{sub x} were found through selected area electron diffraction (SAED) analysis. According to the analysis, it can be concluded that cerium has partly substituted for neodymium by occupying the corresponding atom sites in the Ce{sub 15}Nd{sub 15}Fe{sub bal}B{sub 1} magnet, without changing the crystal configuration.

36 MATERIALS SCIENCE↗

Effect of angleplying and matrix enhancement on impact-resistant boron/aluminum composites

Efforts to improve the impact resistance of B/Al are reviewed and analyzed. Tensile and dynamic modulus tests, thin sheet Charpy and Izod impact tests, and standard full size Charpy impact tests were conducted on 0.20 mm (8 mil) diameter-B/1100 Al matrix composites. Angleplies ranged from unidirectional to + or - 30 deg. The best compromise between reduced longitudinal properties and increased transverse properties was obtained with + or - 15 deg angleply. The pendulum impact strengths of improved B/Al were higher than that of notched titanium and appear to be enough to warrant consideration of B/Cl for application to fan blades in aircraft gas turbine engines.

Mcdanels, D. L.↗

Identification and recovery of rare-earth permanent magnets from waste electrical and electronic equipment

Highlights: • Different WEEE were analyzed and the rare-earth permanent magnets were collected. • Chemical composition evolution of Nd-Fe-B alloys over the years is illustrated. • Loudspeakers from laptops and loudspeakers from flat TV contained Nd-Fe-B magnets. • The amount of Nd-Fe-B could double if the loudspeakers streams are included. - Abstract: Nd-Fe-B permanent magnets are a strategic material for a number of emerging technologies. They are a key component in the most energy efficient electric motors and generators, thus, they are vital for energy technologies, industrial applications and automation, and future forms of mobility. Rare earth elements (REEs) such as neodymium, dysprosium and praseodymium are also found in waste electrical and electronic equipment (WEEE) in volumes that grow with the technological evolution, and are marked as critical elements by the European Commission due to their high economic importance combined with significant supply risks. Recycling could be a good approach to compensate for the lack of rare earths (REs) on the market. However, less than 1% of REs are currently being recycled, mainly because of non-existing collection logistics, lack of information about the quantity of RE materials available for recycling and recycling-unfriendly product designs. To improve these lack of information, different waste streams of electrical and electronic equipment from an industrial recycling plant were analyzed in order to localize, identify and collect RE permanent magnets of the Nd-Fe-B type. This particular type of magnets were mainly found in hard disk drives (HDDs) from laptops and desktop computers, as well as in loudspeakers from compact products such as flat screen TVs, PC screens, and laptops. Since HDDs have been investigated thoroughly by many authors, this study focusses on other potential Nd-Fe-B resources in electronic waste. The study includes a systematic survey of the chemical composition of the Nd-Fe-B magnets found in the selected waste streams, which illustrates the evolution of the Nd-Fe-B alloys over the years. The study also provides an overview over the types of magnets integrated in different waste electric and electronic equipment.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗