Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cycle Threshold”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Stability of a rigid rotor supported on oil-film journal bearings under dynamic load

Most published work relating to dynamically loaded journal bearings are directed to determining the minimum film thickness from the predicted journal trajectories. These do not give any information about the subsynchronous whirl stability of journal bearing systems since they do not consider the equations of motion. It is, however, necessary to know whether the bearing system operation is stable or not under such an operating condition. The stability characteristics of the system are analyzed. A linearized perturbation theory about the equilibrium point can predict the threshold of stability; however it does not indicate postwhirl orbit detail. The linearized method may indicate that a bearing is unstable for a given operating condition whereas the nonlinear analysis may indicate that it forms a stable limit cycle. For this reason, a nonlinear transient analysis of a rigid rotor supported on oil journal bearings under: (1) a unidirectional constant load, (2) a unidirectional periodic load, and (3) variable rotating load are performed. The hydrodynamic forces are calculated after solving the time-dependent Reynolds equation by a finite difference method with a successive overrelaxation scheme. Using these forces, equations of motion are solved by the fourth-order Runge-Kutta method to predict the transient behavior of the rotor. With the aid of a high-speed digital computer and graphics, the journal trajectories are obtained for several different operating conditions.

Majumdar, B. C.↗

Simulating Global AeroMACS Airport Ground Station Antenna Power Transmission Limits to Avoid Interference With Mobile Satellite Service Feeder Uplinks

The Aeronautical Mobile Airport Communications System (AeroMACS), which is based upon the IEEE 802.16e mobile wireless standard, is expected to be implemented in the 5091 to 5150 MHz frequency band. As this band is also occupied by Mobile Satellite Service feeder uplinks, AeroMACS must be designed to avoid interference with this incumbent service. The aspects of AeroMACS operation that present potential interference are under analysis in order to enable the definition of standards that assure that such interference will be avoided. In this study, the cumulative interference power distribution at low Earth orbit from transmitters at global airports was simulated with the Visualyse Professional software. The dependence of the interference power on antenna distribution, gain patterns, duty cycle, and antenna tilt was simulated. As a function of these parameters, the simulation results are presented in terms of the limitations on transmitter power from global airports required to maintain the cumulative interference power under the established threshold.

Wilson, Jeffrey D.↗

An Overview of ARTMIP’s Tier 2 Reanalysis Intercomparison: Uncertainty in the Detection of Atmospheric Rivers and their Associated Precipitation

Atmospheric rivers, or long but narrow regions of enhanced water vapor transport, are an important component of the hydrologic cycle as they are responsible for much of the poleward transport of water vapor and result in precipitation, sometimes extreme in intensity. Despite their importance, much uncertainty remains in the detection of atmospheric rivers in large datasets such as reanalyses and century scale climate simulations. To understand this uncertainty, the Atmospheric River Tracking Method Intercomparison Project (ARTMIP) developed tiered experiments, including the Tier 2 Reanalysis Intercomparison that is presented here. Eleven detection algorithms submitted hourly tags--binary fields indicating the presence or absence of atmospheric rivers--of detected atmospheric rivers in the Modern Era Retrospective Analysis for Research and Applications, version 2 (MERRA-2) and European Centre for Medium-Range Weather Forecasts' Reanalysis Version 5 (ERA5) as well as six-hourly tags in the Japanese 55-year Reanalysis (JRA-55). Due to a higher climatological mean for integrated water vapor transport in MERRA-2, atmospheric rivers were detected more frequently relative to the other two reanalyses, particularly in algorithms that use a fixed threshold for water vapor transport. The finer horizontal resolution of ERA5 resulted in narrower atmospheric rivers and an ability to detect atmospheric rivers along resolved coastlines. The fraction of hemispheric area covered by ARs varies throughout the year in all three reanalyses, with different atmospheric river detection tools having different seasonal cycles.

ARTMIP↗

Remote Sensing of Multitemporal Functional Lake‐To‐Channel Connectivity and Implications for Water Movement Through the Mackenzie River Delta, Canada

The Mackenzie River Delta in Canada is a mediator of hydrological transport between the expansive Mackenzie River watershed and the Beaufort Sea. Within the delta, lakes frequently act as water and sediment traps, limiting or delaying the movement of material to the coastal ocean. The degree to which this filtering takes place depends on the ease with which sediment-laden water is transported from distributary channels into deltaic lakes, referred to as functional lake-to-channel connectivity, which varies both spatially and temporally. Tracking of connectivity has previously been limited to either small regions of the delta or has focused on a snapshot of connectivity at a single instance in time. Here we describe an algorithm that uses Landsat imagery to track summertime functional lake-to-channel connectivity of 10,362 lakes between 1984 and 2022 on an image-by-image basis. We calculate a total average connected lake area of 1400.7 km 2 during the 2 weeks after peak discharge, 763.6 km 2 higher than previous estimates, suggesting a larger influence of connected lakes on water movement through the delta than previously estimated. We also identify water level thresholds that lead to the initiation of high sediment river water movement into 5,989 lakes (908 lakes with uncertainty ≤±0.5 m), and identify an additional 2899 lakes whose connectivity does not vary at all. As the Arctic hydrological cycle responds to climate change, this work lays a foundation for tracking the movement of water, and the matter it carries, from the Mackenzie River watershed to the Beaufort Sea.

47 OTHER INSTRUMENTATION↗

Ultrathin amorphous carbon films synthesized by filtered cathodic vacuum arc used as protective overcoats of heat-assisted magnetic recording heads

Despite numerous investigations of amorphous carbon (a-C) films, a comprehensive study of the feasibility and optimization of sub-5-nm-thick a-C films deposited onto the write pole of heat-assisted magnetic recording (HAMR) heads is lacking. The main objective of this study was to identify the role of pulse substrate bias voltage and C+ ion incidence angle on the structure and thickness of 1–4-nm-thick a-C films deposited by a rather new thin-film deposition method, known as filtered cathodic vacuum arc (FCVA). The cross-sectional structure of a-C films synthesized under various FCVA conditions was examined by high-resolution transmission electron microscopy (HRTEM), scanning transmission electron microscopy (STEM), and electron energy loss spectroscopy (EELS). It was found that film growth under process conditions of low-to-intermediate substrate bias voltage (in the range of -25 to -100 V), low ion incidence angle (10°), very short deposition time (6 s), and fixed other deposition parameters (65% duty cycle of substrate pulse biasing and 1.48 × 10 19 ions/m 2 ·s ion flux) yields a-C films of thickness ≤4 nm characterized by a significant content (~50–60 at%) of tetrahedral ( sp 3 ) carbon atom hybridization. A threshold where sp 3 hybridization is greatly reduced due to limited film growth was determined from the HRTEM/STEM and EELS measurements. The results of this study demonstrate the viability of FCVA to produce extremely thin and uniform protective a-C films with relatively high sp 3 contents for HAMR heads.

Science & Technology - Other Topics↗

Laser information encoded in atomic asymmetrical ionization in few-cycle laser fields

The pulse duration and carry-envelope phase (CEP) are two important parameters to characterize a few-cycle intense laser. We systematically study asymmetrical ionization of Ar in few-cycle laser fields with different pulse durations (3-7 fs) and laser intensities (10{sup 13}-10{sup 14} W/cm{sup 2}) by solving the time-dependent Schroedinger equation. Analyzing the CEP-dependent asymmetry of above-threshold ionization as a function of the photoelectron energy, we find that the qualitative global features of CEP-dependent asymmetry are insensitive to the pulse duration. But the fine structures of the asymmetry are sensitive to the laser pulse duration. Changing Ar to H atoms, we find that the information encoded in asymmetry is insensitive to target atoms at a moderate laser intensity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fitting Leak Test Report

Many Human Landing System flight elements are anticipated to implement mechanically connected joints in cryogenic fluid lines to simplify system assembly. These joints will need to survive launch vibration, while cold, and remain as leak‐free as possible to minimize commodity loss. Threaded fluid fittings should be qualified for use in their expected environments to reduce risk and ensure mission success. A new ground‐based test apparatus was developed and validated to obtain quantifiable low leak rate test data for a small component, such as a pressurized threaded fluid fitting, while in the temperature range of liquid hydrogen. A cryocooler is used to attain the cold test temperature and helium leakage from a pressurized fitting mounted within a vacuum test chamber is measured using a mass spectrometer leak detector. Two different sizes of Swagelok VCR fittings with three different types of seal rings were selected as the test articles for the initial proof of concept testing. Each fitting configuration was subjected to two consecutive cryogenic thermal cycles and cold leak measurement tests, followed by exposure to a high vibration test profile at ambient temperature on a shaker table, and then two additional cold leak measurement tests. Very low leak rates, below the acceptable leak rate threshold, were measured at the pressures tested. Several enhancements to the test hardware are discussed that would facilitate a comprehensive fitting qualification test campaign by enabling a higher test throughput rate and ensuring a repeatable test profile.

Cryogenic Fluid Management↗

Research Priorities for Tropical Ecosystems Under Climate Change Workshop Report, June 4-5, 2012

The Tropics, with approximately 40% of Earth’s land surface area, critically regulate many Earth system processes. Containing great stores of biomass, tropical ecosystems represent the largest reservoir of terrestrial carbon. The Tropics also cycle more carbon dioxide (CO 2 ) and water than any other biome and play important roles in determining Earth’s energy balance, which drives global systems of temperature and precipitation. Overall, wet tropical forests contain about 25% of the carbon in the terrestrial biosphere and account for 34% of Earth’s gross primary production. This vast area, which includes the world’s driest deserts and wettest forests, also harbors a large fraction of Earth’s biodiversity. Despite the negative impact of widespread deforestation, tropical ecosystems continue to benefit Earth’s atmosphere and climate system by mitigating climatic warming through carbon sequestration and evaporative cooling. Of great concern, however, is the vulnerability of tropical ecosystems to rapid shifts resulting from a changing climate. Significant potential thus exists for important feedbacks with CO 2 , water, and energy exchange from tropical ecosystems due to climatic change. Tropical forests are thought to be especially vulnerable to climate change compared to other regions of Earth. Unlike in temperate forests where temperatures fluctuate widely during the course of a year, temperatures in tropical forests (at a given elevation) vary little, with trees adapted to thrive in a relatively narrow thermal range. Hence, the relative impact of climatic warming likely will be greater in the Tropics because predicted changes in temperature are large compared to normal interannual variation. Moreover, increasing atmospheric temperatures may push tropical forests into climate regimes beyond those ever experienced by existing forests. Also, high biomass tropical forests require sufficient moisture to maintain a closed canopy, and changing precipitation patterns such as a shift toward more extreme events and extended droughts potentially could push forests beyond a moisture threshold, causing widespread tree mortality. Catastrophic loss of tropical forests may be a key feedback in tropical ecosystems because widespread tree mortality would release large quantities of CO2 back to the atmosphere, accelerating the influence of this primary driver of global warming. Major disruptions in hydrologic cycles affecting large tropical regions also would be expected.

54 ENVIRONMENTAL SCIENCES↗

Decommissioning of the Hematite Former Fuel Cycle Facility using a decision flow logic based work control process

The remediation and decommissioning of the Hematite Former Fuel Cycle Facility (FFCF), the Hematite Facility, is currently being carried out by Westinghouse Electric Company LLC under the Hematite Decommissioning Project (HDP). The Hematite Facility is located near the town of Hematite, Missouri, USA. The Hematite Facility consists of 228 acres of land with primary operations historically being conducted within the central portion of the property that is roughly 10 acres including Burial Pits and the Site Pond area. Decommissioning and remediation activities are being performed with the eventual objective of the release of the property. Primary contaminants include the legacy disposal and contamination of natural and enriched uranium from the nuclear fuel cycle, as well as chemicals used during the facility operations. Two major regulatory bodies, the U.S. Nuclear Regulatory Commission (NRC) and the Missouri Department of Natural Resources (MDNR), provide critical roles in the approval and oversight of the current regulatory path to remediation, decommissioning and eventual release. Further, remediation and decommissioning activities are performed under the implementing policies, plans, and procedures under the Hematite Decommissioning Plan (DP) and the Record of Decision (ROD). Remediation and decommissioning tasks at the Hematite Former Fuel Cycle Facility, referred to as the Hematite Facility, are performed against a disciplined decision logic flow that applies accumulated technical and monitoring data to determine each step of the excavation, exhumation, and removal of wastes from the Burial Pits and the remaining Areas of Concern (AOC). Decision flow logic is based upon the nuclear criticality safety controls and threshold conditions, relative level of radioactive and chemical contamination, security protocol, and final waste stream disposition. The end result is to remediate the residual radioactive and chemical contamination to approved dose-based and risk-based cleanup criteria as negotiated with U.S. Federal and State Regulators. The purpose of the paper is to provide a summary of the successful implementation of the decision flow logic to the remediation and decommissioning tasks performed to date. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Mechanisms and Impacts of Earth System Tipping Elements

Tipping elements are components of the Earth system which may respond nonlinearly to anthropogenic climate change by transitioning toward substantially different long-term states upon passing key thresholds or “tipping points.” In some cases, such changes could produce additional greenhouse gas emissions or radiative forcing that could compound global warming. Improved understanding of tipping elements is important for predicting future climate risks and their impacts. Here we review mechanisms, predictions, impacts, and knowledge gaps associated with 10 notable Earth system components proposed to be tipping elements. We evaluate which tipping elements are approaching critical thresholds and whether shifts may manifest rapidly or over longer timescales. Some tipping elements have a higher risk of crossing tipping points under middle-of-the-road emissions pathways and will possibly affect major ecosystems, climate patterns, and/or carbon cycling within the 21st century. However, literature assessing different emissions scenarios indicates a strong potential to reduce impacts associated with many tipping elements through climate change mitigation. The studies synthesized in our review suggest most tipping elements do not possess the potential for abrupt future change within years, and some proposed tipping elements may not exhibit tipping behavior, rather responding more predictably and directly to the magnitude of forcing. Nevertheless, uncertainties remain associated with many tipping elements, highlighting an acute need for further research and modeling to better constrain risks.

58 GEOSCIENCES↗

Improving high temperature resilience of fiber sensor embedded smart components through laser shock peening

This study explores the use of laser shock peening (LSP) to enhance material properties and high-temperature performance of fiber-sensor-fused smart parts fabricated by additive manufacturing (AM) methods. Using embedded fiber sensors as distributed strain gauges, the study demonstrates that LSP can induce compressive strains of up to 130 µε on fiber embedded 1-mm below metal surfaces. The electron backscatter diffraction (EBSD) analysis shows that, with optimized LSP parameters, the metallic matrix undergoes substantial microstructural refinement, resulting in denser structures. Thermal cycling tests showed that the LSP process can increase fiber slippage temperatures by more than 50 °C. This work shows that the LSP process is an effective room-temperature process for enhancing both surface quality and increasing fiber slippage threshold under both thermal and mechanical stress.

Zhong, Shuda [University of Pittsburgh, PA (United↗

An Automated Approach to Map the History of Forest Disturbance from Insect Mortality and Harvest with Landsat Time-Series Data

Forests contain a majority of the aboveground carbon (C) found in ecosystems, and understanding biomass lost from disturbance is essential to improve our C-cycle knowledge. Our study region in the Wisconsin and Minnesota Laurentian Forest had a strong decline in Normalized Difference Vegetation Index (NDVI) from 1982 to 2007, observed with the National Ocean and Atmospheric Administration's (NOAA) series of Advanced Very High Resolution Radiometer (AVHRR). To understand the potential role of disturbances in the terrestrial C-cycle, we developed an algorithm to map forest disturbances from either harvest or insect outbreak for Landsat time-series stacks. We merged two image analysis approaches into one algorithm to monitor forest change that included: (1) multiple disturbance index thresholds to capture clear-cut harvest; and (2) a spectral trajectory-based image analysis with multiple confidence interval thresholds to map insect outbreak. We produced 20 maps and evaluated classification accuracy with air-photos and insect air-survey data to understand the performance of our algorithm. We achieved overall accuracies ranging from 65% to 75%, with an average accuracy of 72%. The producer's and user's accuracy ranged from a maximum of 32% to 70% for insect disturbance, 60% to 76% for insect mortality and 82% to 88% for harvested forest, which was the dominant disturbance agent. Forest disturbances accounted for 22% of total forested area (7349 km2). Our algorithm provides a basic approach to map disturbance history where large impacts to forest stands have occurred and highlights the limited spectral sensitivity of Landsat time-series to outbreaks of defoliating insects. We found that only harvest and insect mortality events can be mapped with adequate accuracy with a non-annual Landsat time-series. This limited our land cover understanding of NDVI decline drivers. We demonstrate that to capture more subtle disturbances with spectral trajectories, future observations must be temporally dense to distinguish between type and frequency in heterogeneous landscapes.

Forest↗

APPLICATIONS OF CURRENT TECHNOLOGY FOR CONTINUOUS MONITORING OF SPENT FUEL

Advancements in technology have opened many opportunities to improve upon the current infrastructure surrounding the nuclear fuel cycle. Embedded devices, very small sensors, and wireless technology can be applied to Security, Safety, and Nonproliferation of Spent Nuclear Fuel. Security, separate of current video monitoring systems, can be improved by integrating current wireless technology with a variety of sensors including motion detection, altimeter, accelerometer, and a tagging system. By continually monitoring these sensors, thresholds can be set to sense deviations from nominal values. Then alarms or notifications can be activated as needed. Safety can be improved in several ways. First, human exposure to ionizing radiation can be reduced by using a wireless sensor package on each spent fuel cask to monitor radiation, temperature, humidity, etc. Since the sensor data is monitored remotely operator stay-time is decreased and distance from the spent fuel increased, so the overall radiation exposure is reduced as compared to visual inspections. The second improvement is the ability to monitor continuously rather than periodically. If changes occur to the material, alarm thresholds could be set and notifications made to provide advanced notice of negative data trends. These sensor packages could also record data to be used for scientific evaluation and studies to improve transportation and storage safety. Nonproliferation can be improved for spent fuel transportation and storage by designing an integrated tag that uses current infrastructure for reporting and in an event; tracking can be accomplished using the Iridium satellite system. This technology is similar to GPS but with higher signal strength and penetration power, but lower accuracy. A sensor package can integrate all or some of the above depending on the transportation and storage requirements and regulations. A sensor package can be developed using off the shelf technology and applying it to each specific need. There are products on the market for smart meters, industrial lighting control and home automation that can be applied to the Back End Fuel Cycle. With a little integration and innovation a cost effective solution is achievable.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Recent High Burnup LOCA Testing at Oak Ridge National Laboratory

To improve fuel cycle economics, increasing the fuel burnup limit in light-water reactors requires a solid technical foundation. Observations from experiments at Halden and Studsvik highlighted severe fuel fragmentation during loss-of-coolant-accident (LOCA) conditions, indicating a need for further technical considerations. These experiments suggest that the fragmentation threshold for high-burnup fuel might be influenced by pre-transient power levels. Consequently, additional LOCA test data are essential to complement existing findings and to deepen our understanding. Oak Ridge National Laboratory’s Severe Accident Test Station has been instrumental in advancing knowledge about high-burnup fuel fragmentation, relocation, and dispersal. This milestone report details two high-burnup LOCA tests designed to evaluate the effects of terminal temperature and grid spacers (or cladding restraints) on fuel fragmentation and relocation susceptibility. In addition, BISON fuel performance modeling and out-of-cell benchmark testing were conducted to better interpret the in-cell test results. These tests were developed in collaboration with fuel vendors to ensure that the results provide valuable data for topical reports and support the Nuclear Regulatory Commission’s review.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Mean Time to Failure Analysis for the Los Alamos National Laboratory Weapons Engineering Tritium Facility Tritium Containment Vessels

The Weapons Engineering Tritium Facility (WETF) is a Hazard Category 2 nonreactor nuclear facility located in Technical Area 16 (TA-16) of Los Alamos National Laboratory. Tritium related research, development, and processing in support of stockpile stewardship program activities is conducted at WETF. Within WETF, various devices can be used to contain tritium and certain devices are designated as Tritium Containment Vessels (TCVs). Several different device types are identified as TCVs within WETF such as LP-50s and AL-M1s. Historically, a threshold tritium mass value has been used as the mechanism for designating a device as a TCV. When the tritium content of the device was below the tritium mass threshold it was not considered to be a TCV in the formal context. When the tritium content was above the administrative threshold, the device was considered to be a TCV. An upper tritium mass limit was also established for TCVs.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Equatorial ionospheric absorption during half a solar cycle /1964-1970/

An extensive series of vertical incidence absorption measurements made at an equatorial station is analyzed in detail to provide information which will lead to a better understanding of the lower ionosphere. A quantitative empirical relationship is derived between absorption and 1-8 A solar flux for moderate levels of solar activity. It is shown that the threshold flux for D-region modification, at a solar zenith angle of 10 deg, is approximately 0.0005 erg per sq cm per sec. Attention is drawn to the incidence of days of high absorption even in the absence of solar X-ray activity. Available evidence points to variability of the order of 10-40 per cent in the intensity of the solar Lyman-alpha radiation as the most likely cause of these unusual, though infrequent, enhancements in absorption.

Gnanalingam, S.↗