Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLATES - PLASTICITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

USHPRR MP-1 Irradiation Test: Assessment of Edge Pitting and Bond Line Corrosion in Vendor Produced Fuel Plates

This report summarizes an effort to identify the source of anomalous localized edge pitting and bond line corrosive attack of experimental mini fuel plates manufactured at the commercial fuel vendor BWXT and tested in the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL) as part of the Miniplate 1 (MP-1) irradiation test. The MP-1 test was conducted by the US High Performance Research Reactor Project (USHPRR) and overseen by the Fuel Qualification Pillar (FQ). The test involved evaluation of a mix of 62 “vendor” fuel plates fabricated at BWXT and 12 “laboratory” fuel plates fabricated at Idaho National Laboratory using commercial-scale and labscale fabrication processes respectively. The MP-1 test was the first in a series of tests to generate data to support qualification of a new plate-type low-enriched uranium (LEU) U-10Mo monolithic fuel system. The major objective of the MP-1 experiment was to test, for the first time, miniplates fabricated by a commercial fuel vendor over the range of irradiation conditions relevant to conversion of NRC regulated High Performance Research Reactors (HPRRs) from high-enriched uranium to LEU. The focus of the efforts described in this report are the vendor fuel plates to inform changes in the fabrication process prior to fabrication of the next miniplate experiment MP2.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

The STAT7 Code for Statistical Propagation of Uncertainties in Steady State Thermal Hydraulics Analysis of Plate Fueled Reactors

The STAT7 software was developed to perform steady-state thermal hydraulic analyses. Application of the software is for non-power research and test reactors, including conversion to low-enriched uranium fuel of U.S. High-Performance Research Reactors such as MITR-II. Since it can be necessary to repeat analysis during fuel reloading, STAT7 accommodates flexibility in analyzing many realistic aspects of reactor fuel management. STAT7 uses a Monte Carlo approach to model common fabrication parameters and other key reactor analysis uncertainties required for research and test reactor thermal hydraulic analyses. These safety calculations are ultimately intended to protect against high fuel plate temperatures due to critical heat flux or departure from nucleate boiling or onset of flow instability; but additional margin is obtained by basing the limiting safety settings on avoiding onset of nucleate boiling. STAT7 can simultaneously analyze all of the axial nodes of all of the fuel plates and all of the coolant channels for one lateral stripe of a fuel element. The stripes run the length of the fuel, from the bottom to the top. Power splits are calculated for each axial node of each plate to determine how much of the power goes out each face of the plate. By running STAT7 multiple times, full core analysis can be performed by analyzing the margin to onset of nucleate boiling and onset of flow instability for each axial node of each stripe of each plate of each element in the core.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Ytterbium Ion Collection on Graphite Plates

Surface characterization and analysis of the graphite collection and strike plates was conducted in this report. These plates were from an electromagnetic isotope separation collector that had been irradiated with an ytterbium ion beam. The results of this study are reported along with analysis and discussion of the potential growth mechanism of the ytterbium layer on graphite. It is proposed that directional deposition of ytterbium ions occurs first in the defect regions of the graphite plate. As deposition continues, it leads to the eventual formation of directional globs that elongate and grow into plates, then stacks, and finally into sheets of ytterbium. The ytterbium layer appears to have a definite phase boundary with the graphite layer. It was also determined that during irradiation with the ytterbium ion beam, the sputtered carbon becomes interpolated in the ytterbium surface layer on the graphite plate and has an amorphous microstructure.

36 MATERIALS SCIENCE↗
NASA NTRS1971

Plate measurement techniques and reduction methods used by the West German satellite observers, and resulting consequences for the observation

The West German tracking stations are equipped with ballistic cameras. Plate measurement and plate reduction must therefore follow photogrammetric methods. Approximately 100 star positions and 200 satellite positions are measured on each plate. The mathematical model for spatial rotation of the bundle of rays is extended by including terms for distortion and internal orientation of the camera as well as by providing terms for refraction which are computed for the measured coordinates of the star positions on the plate. From the measuring accuracy of the plate coordinates it follows that the timing accuracy for the exposures has to be about one millisecond, in order to obtain a homogeneous system.

Deker, H.↗
NASA NTRS1971

Plate convergence, transcurrent faults and internal deformation adjacent to Southeast Asia and the western Pacific

A model for oblique convergence between plates of lithosphere is proposed in which at least a fraction of slip parallel to the plate margin results in transcurrent movements on a nearly vertical fault which is located on the continental side of a zone of plate consumption. In an extreme case of complete decoupling only the component of slip normal to the plate margin can be inferred from underthrusting. Recent movements in the western Sunda region provide the most convincing evidence for decoupling of slip, which in this region is thought to be oblique to the plate margin. A speculative model for convergence along the margins of the Philippine Sea is constructed from an inferred direction of oblique slip in the Philippine region. This model requires that the triple point formed by the junction of the Japanese and Izu-Bonin trenches and the Nankai trough migrate along the Sagami trough.

Fitch, T. J.↗
NASA NTRS1972

The response of a plate bonded to a randomly vibrating viscoelastic half-space.

The response of an infinite Bernoulli-Euler plate placed on the surface of a randomly vibrating viscoelastic half-space is calculated, allowing for the presence of shear stresses between the plate and the half-space. The shear stresses arise from the condition that the relative motion between the plate and the half-space vanishes at the interface. The three components of displacement of the free surface of the half-space before the plate is added are assumed to be stationary homogeneous random functions of position and time. From the wavenumber-frequency spectra of these displacements the frequency spectra of the three components of displacement of the plate half-space interface are calculated. As an example, the frequency spectrum of the vertical interface displacement is calculated for two assumed forms of the wavenumber spectra of the free-surface displacements.

Remington, P. J.↗
NASA NTRS1972

A sandwich plate with a part-through and a debonding crack.

The stress analysis of a metal base plate stiffened by a fiber-reinforced composite layer is considered. It is assumed that the two materials are bonded through an adhesive of constant thickness which is treated as a two-dimensional shear spring in the analysis. The metal plate is assumed to contain a through crack of finite length. The composite plate has no flaws. However, due to the high stress concentration around the crack and on the interface, a debonding crack is assumed to exist, encircling the crack in the base plate. The problem is reduced to a pair of integral equations of the second kind with Fredholm-type kernels. By solving these equations the stress intensity factor in the base plate, the boundary of the debonding crack, and the interface shear stresses acting on the adhesive are calculated.

Erdogan, F.↗
NASA NTRS1973

Free vibrations of thermally stressed orthotropic plates with various boundary conditions

An analytical investigation of the vibrations of thermally stressed orthotropic plates in the prebuckled region is presented. The investigation covers the broad class of trapezoidal plates with two opposite sides parallel. Each edge of the plate may be subjected to different uniform boundary conditions. variable thickness and arbitrary temperature distributions (analytical or experimental) for any desired combination of boundary conditions may be prescribed. Results obtained using this analysis are compared to experimental results obtained for isotropic plates with thermal stress, and to results contained in the literature for orthotropic plates without thermal stress. Good agreement exists for both sets of comparisons.

Bailey, C. D.↗
NASA NTRS1973

Down-bucklng of a corner of a descending plate

A model of the earth's crust is presented as a set of rigid crustal blocks in which the crust is consumed, compressed, or created only at the boundaries of the blocks. As such the trench boundary moves with respect to the colliding plates because of down-buckling at the corner of the descending plate. It is further shown that this mechanism requires plate consumption of the descending plate at a rate faster than the relative plate motion, which in turn causes infilling of the basin behind the arc to compensate for the increased destruction. It is demonstrated that earthquake, heat flow, paleomagnetic, gravity anomaly, and geologic data derived from Japan and the Sea of Japan support the model.

Lowrey, B. E.↗
NASA NTRS1973

Plate motion and the secular shift of the mean pole

The global plate motion indicates that changes in the products of inertia of the earth due to tectonic plate movement may provide a secular shift of the mean pole. A mathematical procedure for calculating this shift based on the plate theory is presented. Explicit expressions were obtained for the dependence of the secular polar shift on the dimensions and locations of the plate boundaries. Numerical results show that the secular motion of the mean pole is 0.0002 sec/year in the direction of 67 W. Hence, it is deduced that the influence of the plate motion on the secular polar shift may account for 10% of the observed value.

Liu, H.↗
NASA NTRS1973

Free vibrations of multilayered composite plates.

Summary of some of the results of a recent study of the reliability and range of validity of two-dimensional plate theories in application to low-frequency free vibration analysis of simply supported, bidirectional, multilayered plates consisting of a large number of layers. These results show that for composite plates the error in the predictions of the classical plate theory is strongly dependent on the number and stacking of the layers, in addition to the degree of orthotropy of the individual layers and the thickness ratio of the plate.

Noor, A. K.↗
NASA NTRS1973

Analysis of transient heat flow to thick-walled plates and cylinders

A methodology is described for the analysis of a transient temperature measurement made in a flat or curved plate subjected to convective heat transfer, such that the surface heat flux, the hot-gas temperture, and the gas heat transfer coefficient can be determined. It is shown that if the transient temperature measurement is made at a particular point located nearly midway in the thickness of the plate there is an important simplification in the data analysis process, in that the factor relating the surface heat flux to the measured rate of rise of temperature becomes invariant for a Fourier Number above 0.60 and for all values of the Biot Number. Parameters are derived, tabulated, and plotted which enable straightforward determination of the surface heat flux, the hot-gas temperature, of the plate, the rate of rise of temperature, the plate thickness and curvature, and the mean thermal properties of the plate material at the test temperature.

Powell, W. B.↗
NASA NTRS1974

Elastic stability of laminated, flat and curved, long rectangular plates subjected to combined inplane loads

A method is presented to predict theoretical buckling loads of long, rectangular flat and curved laminated plates with arbitrary orientation of orthotropic axes each lamina. The plate is subjected to combined inplane normal and shear loads. Arbitrary boundary conditions may be stipulated along the longitudinal sides of the plate. In the absence of inplane shear loads and extensional-shear coupling, the analysis is also applicable to finite length plates. Numerical results are presented for curved laminated composite plates with boundary conditions and subjected to various loadings. These results indicate some of the complexities involved in the numerical solution of the analysis for general laminates. The results also show that the reduced bending stiffness approximation when applied to buckling problems could lead to considerable error in some cases and therefore must be used with caution.

Viswanathan, A. V.↗
NASA NTRS1974

An experimental-theoretical study of free vibrations of plates on elastic point supports

A theoretical and experimental study is made to investigate the effect on plate vibrations of varying the stiffness of corner elastic point supports. An experiment is conducted in which the bending stiffness of horizontal beams is used to support a square plate at its four corners. The stiffness of these supports can be varied over such a range that the plate fundamental frequency is lowered to 40% of the rigid support frequency. The variation with support stiffness of the frequencies of the first eight plate modes is measured and is compared with results from a theoretical model in which a Rayleigh-Ritz analysis is used which approximates the plate mode shapes as products of free-free beam modes. The elastic point supports are modeled both as massless translational springs and springs with tip masses, which are included to better represent the experimental supports.

Leuner, T. R.↗
NASA NTRS1973

On the dynamic stability of multilayer sandwich plates

Study of the dynamic stability of plates which are constructed of several alternating soft and hard layers and are subjected to time-dependent periodic in-plane loads. A theory that accounts for all of these effects is presented for multilayer sandwich plates. The plate thickness consists of (k - 1) orthotropic soft core layers sandwiched between k hard isotropic membrane layers, each of which may have a different thickness and elastic properties. It is assumed that the core layers carry only the transverse shear stresses, while the hard membrane layers carry the in-plane normal and shear stresses. The complementary variational principle for dynamics is used to derive the governing differential equations and the necessary boundary conditions for the dynamic stability of the sandwich plate. The equations governing the vibration of the plate and those governing its static stability are deduced from the more general equations for dynamic stability.

Salama, A. M.↗
NASA NTRS1976

Symmetries in laminated composite plates

The different types of symmetry exhibited by laminated anisotropic fibrous composite plates are identified and contrasted with the symmetries of isotropic and homogeneous orthotropic plates. The effects of variations in the fiber orientation and the stacking sequence of the layers on the symmetries exhibited by composite plates are discussed. Both the linear and geometrically nonlinear responses of the plates are considered. A simple procedure is presented for exploiting the symmetries in the finite element analysis. Examples are given of square, skew and polygonal plates where use of symmetry concepts can significantly reduce the scope and cost of analysis.

Noor, A. K.↗
NASA NTRS1976

A high order theory for uniform and laminated plates

A theory of plate deformation is derived which accounts for the effects of transverse shear deformation, transverse normal strain, and a nonlinear distribution of the in-plane displacements with respect to the thickness coordinate. The theory is compared with lower order plate theories through application to a particular problem involving a plate acted upon by a sinusoidal surface pressure. Comparison is also made with exact elasticity solution of this problem. It is found that when the ratio of the characteristic length of the load pattern to the plate thickness is of the order of unity, lower order theories are inadequate and the present high order theory is required to give meaningful results. Results are given for the bending of symmetric cross-ply and angle-ply laminates. Comparison with exact elasticity solutions indicates that the present plate theory is sufficiently accurate for predicting the behavior of thick laminates.

Lo, K. H.↗