Search NASA⌕ Search

SEARCH · Search NASA

Results for “Pilot”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

Quantification of pilot workload via instrument scan

The use of visual scanning behavior as an indicator of pilot workload is described. The relationship between level of performance on a constant piloting task under simulated IFR conditions, the skill of the pilot the level of mental workload induced by an additional verbal task imposed on the basic control task, and visual scanning behavior is investigated. An increase in fixation dwell times, especially on the primary instrument with increased mental loading is indicated. Skilled subjects 'stared' less under increased loading than did novice pilots. Sequences of instrument fixations were also examined. The percentage occurrence of the subject's most used sequences decreased with increased task difficulty for novice subjects but not for highly skilled subjects. Entropy rate (bits/sec) of the sequence of fixations was also used to quantify the scan pattern. It consistently decreased for most subjects as the four loading levels used increased.

Tole, J. R.↗

A model-based technique for predicting pilot opinion ratings for large commercial transports

A model-based technique for predicting pilot opinion ratings is described. Features of this procedure, which is based on the optimal-control model for pilot/vehicle systems, include (1) capability to treat "unconventional" aircraft dynamics, (2) a relatively free-form pilot model, (3) a simple scalar metric for attentional workload, and (4) a straightforward manner of proceeding from descriptions of the flight task environment and requirements to a prediction of pilot opinion rating. The method was able to provide a good match to a set of pilot opinion ratings obtained in a manned simulation study of large commercial aircraft in landing approach.

Levison, W. H.↗

Pilot opinions of sampling effects in lateral-directional control

Flight experiments with a microprocessor control system were conducted to determine the effects of variations in sampling parameters on several pilots' opinions of lateral-directional flying qualities. Princeton's variable-response research aircraft (VRA), which is equipped with a microprocessor based digital flight control system (Micro-DFCS), was the test vehicle. Two U.S. Navy pilots evaluated the effects of sampling rate, quantization, and pure time delay during tracking, approach, and landing. Aircraft carrier approach tasks were conducted using a Navy approach mirror. Acquisition and tracking of fixed objects on the ground provided additional information related to the Navy misson. The longitudinal controls were implemented with analog electronics, while the lateral-directional pilot inputs (stick and rudder) were fed to the Micro-DFCS, which commanded the ailerons and rudder. The conceptual relationship between the evaluation pilot's lateral-directional inputs, the flight computer, and the aircraft are illustrated.

Stengel, R. F.↗

Piloted simulation of an on-board trajectory optimization algorithm

This paper will describe a real time piloted simulation of algorithms designed for on-board computation of time-optimal intercept trajectories for an F-8 aircraft. The algorithms, which were derived using singular perturbation theory, generate commands that are displayed to the pilot on flight director needles on the 8-ball. By flying the airplane so as to zero the horizontal and vertical needles, the pilot flies an approximation to a time-optimal intercept trajectory. The various display and computation modes that are available will be described and results will be presented illustrating the performance of the algorithms with a pilot in the loop.

Price, D. B.↗

What do pilots see in displays

Based on pilots' scanning data and discussions with pilots, general aviation flight instruments have been classified into three categories. The classification is related to the type of information presented, the way the information is used, and the pilot's role as a monitor and controller. Suggestions are made for modifying the instruments of one category to improve the information displayed such that when monitoring, the pilot can more quickly extract the information needed.

Harris, R. L., Sr.↗

Prediction of aircraft handling qualities using analytical models of the human pilot

The optimal control model (OCM) of the human pilot is applied to the study of aircraft handling qualities. Attention is focused primarily on longitudinal tasks. The modeling technique differs from previous applications of the OCM in that considerable effort is expended in simplifying the pilot/vehicle analysis. After briefly reviewing the OCM, a technique for modeling the pilot controlling higher order systems is introduced. Following this, a simple criterion for determining the susceptibility of an aircraft to pilot-induced oscillations (PIO) is formulated. Finally, a model-based metric for pilot rating prediction is discussed. The resulting modeling procedure provides a relatively simple, yet unified approach to the study of a variety of handling qualities problems.

Hess, R. A.↗

A flight investigation of simulated data-link communications during single-pilot IFR flight. Volume 2: Flight evaluations

Key problems in single pilot instrument flight operations are in the management of flight data and the processing of cockpit information during conditions of heavy workload. A flight data console was developed to allow simulation of a digital data link to replace the current voice communications stem used in air traffic control. This is a human factors evaluation of a data link communications system to determine how such a system might reduce cockpit workload, improve flight proficiency, and be accepted by general aviation pilots. The need for a voice channel as backup to a digital link is examined. The evaluations cover both airport terminal area operations and full mission instrument flight. Results show that general aviation pilots operate well with a digital data link communications system. The findings indicate that a data link system for pilot/ATC communications, with a backup voice channel, is well accepted by general aviation pilots and is considered to be safer, more efficient, and result in less workload than the current voice system.

Parker, J. F., Jr.↗

Study to determine the IFR operational profile and problems of the general aviation single pilot

General aviation single pilot operating under instrument flight rules (GA SPIFR) was studied. The objectives of the study were to (1) develop a GA SPIFR operational profile, (2) identify problems experienced by the GA SPIFR pilot, and (3) identify research tasks which have the potential for eliminating or reducing the severity of the problems. To obtain the information necessary to accomplish these objectives, a mail questionnaire survey of instrument rated pilots was conducted. The general aviation IFR single pilot operational profile and selected data analysis examples are presented.

Weislogel, G. S.↗

The effectiveness of an oculometer training tape on pilot and copilot trainees in a commercial flight training program

A study was designed to evaluate the effectiveness of a video tape detailing the various aspects of instrument scanning by experienced pilots on performance by pilots and copilots undergoing flight training in a Boeing 737 flight simulator. The performance ratings by instructor pilots (IP's) and self-reported instrument scan behavior by trainees were compared with those of a control group. The results indicated that the training tape had little or no effect on performance by trainees in the experimental group. Feedback from the IP's and trainees suggested that a feedback strategy providing each trainee's individual instrument scan behavior might be more beneficial in flight training than the general instructional strategy of the oculometer training tape. Flight training personnel and trainees' reports of performance decrements on or around the third day of flight simulator training were investigated. The IP's performance ratings of 27 pilot and copilot trainees failed to reveal a systematic performance decrement; however, feedback from the trainees revealed that their own attribution of performance decrements was associated with the order in which their training occurred within a session. Further research was suggested.

Jones, D. H.↗

Analysis of general aviation single-pilot IFR incident data obtained from the NASA Aviation Safety Reporting System

An analysis of incident data obtained from the NASA Aviation Safety Reporting System (ASRS) has been made to determine the problem areas in general aviation single-pilot IFR (SPIFR) operations. The Aviation Safety Reporting System data base is a compilation of voluntary reports of incidents from any person who has observed or been involved in an occurrence which was believed to have posed a threat to flight safety. This paper examines only those reported incidents specifically related to general aviation single-pilot IFR operations. The frequency of occurrence of factors related to the incidents was the criterion used to define significant problem areas and, hence, to suggest where research is needed. The data was cataloged into one of five major problem areas: (1) controller judgment and response problems, (2) pilot judgment and response problems, (3) air traffic control (ATC) intrafacility and interfacility conflicts, (4) ATC and pilot communication problems, and (5) IFR-VFR conflicts. In addition, several points common to all or most of the problems were observed and reported. These included human error, communications, procedures and rules, and work load.

Bergeron, H. P.↗

Simulator evaluation of a remotely piloted vehicle lateral landing task using a visual display

A simulator evaluation of a remotely piloted research vehicle was conducted at NASA Ames Research Center's Dryden Flight Research Facility to determine the utility of a visual display when studying the influence of changes in the lateral stick gearing gains during landing approaches. The test vehicle used in this study was a highly maneuverable aircraft technology (HiMAT) aircraft, which is a 0.44 scale version of an envisioned small, single seat fighter airplane. Handling qualities ratings and comments obtained from pilots using a simulated visual display of a runway scene and a simulated instrument landing system (ILS) display were compared with the results of actual flight tests. The visual display was found to provide an adequate representation of the test vehicle in a visual landing approach, and it improved the roll response cues provided to the pilot. The handling qualities ratings and comments for flight and simulation visual landing approaches correlated well. The ILS simulation results showed reduced correlation compared with the flight results for ILS approaches. Handling qualities criteria for remotely piloted research vehicles are also discussed in this paper.

Sarrafian, S. K.↗

Real-time pilot guidance system for improved flight-test maneuvers

The real-time pilot display uplink development at the Dryden Flight Research Facility is described, with a focus on recent F-104 studies. A nose boom gathers data on the Mach number, pressure altitude, and angle of attack. The system provides the pilot with guidance to improve maneuver accuracy and fly more complex trajectories. The uplink presents the pilot with computed differences between a reference flight path and actual flight state conditions, using a downlink to the ground where engineering computations are performed, feedback is transmitted, and corrections are applied. Details of the flight test trajectories and data from test results are provided for level turns, constant thrust turns, dynamic pressure trajectories, constant radar altitude accelerations and decelerations, and a Reynolds number trajectory. The system has proved capable of reducing pilot workload and saving fuel by decreasing the flight time necessary to obtain specific data.

Schneider, E. T.↗

The pilot's role in manned space flight

The present investigation regarding the pilot's role in manned space flight takes into account space missions conducted with the Mercury capsule, Gemini, Apollo, Skylab, and the Shuttle. It is concluded that advancements in digital systems and automation technology have made many of the space pilot's tasks easier. However, these advancements have also made the space pilot's training more complicated. He must be familiar with the interrelated failure effects in highly complex vehicle systems. The nominal performance of the Shuttle fly-by-wire entry control system depends, for instance, on nominal electrical power from three fuel cells, nominal performance of three hydraulic auxiliary power units, five computers, other equipment, and microwave landing systems. The pilot must monitor and manage failures in these systems, and, in addition, must be prepared to intervene if an abort situation creates off-nominal conditions.

North, W. J.↗

Simulator evaluation of a remotely piloted vehicle lateral landing task using a visual display

A simulator evaluation of a remotely piloted research vehicle was conducted at NASA Ames Research Center's Dryden Flight Research Facility to determine the utility of a visual display when studying the influence of changes in the lateral-stick gearing gains during landing approaches. The test vehicle used in this study was a highly maneuverable aircraft technology (HiMAT) aircraft, which is a 0.44-scale version of an envisioned small, single-seat fighter airplane. Handling qualities ratings and comments obtained from pilots using a simulated visual display of a runway scene and a simulated instrument landing system (ILS) display were compared with the results of actual flight tests. The visual display was found to provide an adequate representation of the test vehicle in a visual landing approach, and it improved the roll response cues provided to the pilot. The handling qualities ratings and comments for flight and simulation visual landing approaches correlated well. The ILS simulation results showed reduced correlation compared with the flight results for ILS approaches. Handling qualities criteria for remotely piloted research vehicles are also discussed in this paper.

Sarrafian, S. K.↗

Measuring Pilot Workload in a Moving-base Simulator. Part 2: Building Levels of Workload

Pilot behavior in flight simulators often use a secondary task as an index of workload. His routine to regard flying as the primary task and some less complex task as the secondary task. While this assumption is quite reasonable for most secondary tasks used to study mental workload in aircraft, the treatment of flying a simulator through some carefully crafted flight scenario as a unitary task is less justified. The present research acknowledges that total mental workload depends upon the specific nature of the sub-tasks that a pilot must complete as a first approximation, flight tasks were divided into three levels of complexity. The simplest level (called the Base Level) requires elementary maneuvers that do not utilize all the degrees of freedom of which an aircraft, or a moving-base simulator; is capable. The second level (called the Paired Level) requires the pilot to simultaneously execute two Base Level tasks. The third level (called the Complex Level) imposes three simultaneous constraints upon the pilot.

Kantowitz, B. H.↗

Influence of a perspective cockpit traffic display format on pilot avoidance maneuvers

Perspective projections of cockpit displays of traffic information (CDTI) on CRTs to present vertical separation information to airline pilots were examined. The perspective projection was compared with plan view projections of the same air traffic situations. Comparison of the pilots' avoidance maneuvers made when using the perspective display with those made while using more the conventional plan view display showed that pilots maneuvered somewhat earlier with perspective displays. With the perspective display, they maneuvered more frequently in the vertical dimension. The bias to maneuver horizontally probably reflected the poorer presentation of vertical separation on previously used plan view traffic displays. The avoidance decisions made by pilots using both perspective and plan view displays shows fewer unsuccessful maneuvers and fewer maneuvers producing spacing violations with the perspective format.

Ellis, S. R.↗

Flight test experience and controlled impact of a large, four-engine, remotely piloted airplane

A controlled impact demonstration (CID) program using a large, four engine, remotely piloted transport airplane was conducted. Closed loop primary flight control was performed from a ground based cockpit and digital computer in conjunction with an up/down telemetry link. Uplink commands were received aboard the airplane and transferred through uplink interface systems to a highly modified Bendix PB-20D autopilot. Both proportional and discrete commands were generated by the ground pilot. Prior to flight tests, extensive simulation was conducted during the development of ground based digital control laws. The control laws included primary control, secondary control, and racetrack and final approach guidance. Extensive ground checks were performed on all remotely piloted systems. However, manned flight tests were the primary method of verification and validation of control law concepts developed from simulation. The design, development, and flight testing of control laws and the systems required to accomplish the remotely piloted mission are discussed.

Kempel, R. W.↗

Pilot differences and motion cuing effects on simulated helicopter hover

The effects that cues of aircraft motion, delays in visual scene, and movement of a ship model have on pilots' ability to hover a simulated helicopter near a destroyer-class ship were examined. Twelve pilots were tested in a within-subject factorial combination of fixed-base, moving-base, and G-seat conditions in which delays of 66 or 128 ms existed in the simulator's visual display and the pilots had to hover near a moving or stationary ship. Best control performance was seen under the moving-base conditions, whereas poorest control was associated with the fixed-base simulation. An intermediate level of performance was produced by the G-seat. In addition, visual delay affected control of the roll axis of the simulation, and interactions between pilots and motion cuing and visual delay were seen. Movement of the ship model had little effect.

Ricard, G. L.↗