SEARCH · Search NASA

Results for “Source localization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Personalized Tucker Decomposition: Modeling Commonality and Peculiarity on Tensor Data

In this paper, we propose a personalized Tucker decomposition (perTucker) to address the limitations of traditional tensor decomposition methods in capturing heterogeneity across different datasets. perTucker decomposes tensor data into shared global components and personalized local components. We introduce an order orthogonality assumption and develop a proximal gradient regularized block coordinate descent algorithm guaranteed to converge to a stationary point. The unique and common representations learned by perTucker reveal intrinsic statistical patterns in data and provide valuable information for a wide range of downstream analytics, including anomaly detection, source classification, and clustering. We demonstrate perTucker’s effectiveness through a simulation study and two case studies on solar flare detection and tonnage signal classification.

14 SOLAR ENERGY↗

DOE OSTI2024

Characterizing novel Indium Phosphide pad detectors with focused X-ray beams and laboratory tests

Future tracking systems in High Energy Physics experiments will require large instrumented areas with low radiation length. Crystalline silicon sensors have been used in tracking systems for decades, but are difficult to manufacture and costly to produce for large areas. We are exploring alternative sensor materials that are amenable to fast fabrication techniques used for thin film devices. Indium Phosphide pad sensors were fabricated at Argonne National Lab using commercially available InP:Fe 2-inch mono-crystal substrates. Current-voltage and capacitance-voltage characterizations were performed to study the basic operating characteristics of a group of sensors. Micro-focused X-ray beams at Canadian Light Source and Diamond Light Source were used to study the response to ionizing radiation, and characterize the uniformity of the response for several devices. Electrical test results showed a high degree of performance uniformity between the 48 tested devices. X-ray test beam results showed good performance uniformity within tested devices after accounting for spatially-local defects and edge fields. As a result, this motivates further studies into thin film devices for future tracking detectors.

47 OTHER INSTRUMENTATION↗

DOE OSTI2024

NSA Site Science: Use of ARM Observations from Northern Alaska to Evaluate and Improve Prediction Capabilities

The Arctic is warming at a rate nearly double that of the rest of the planet, leading to profound changes in atmospheric, oceanic, and ice processes. The U.S. Department of Energy's (DOE) Atmospheric Radiation Measurement (ARM) user facility has played a significant role in Arctic research, operating observatories in Alaska's North Slope for over 25 years. These observatories provide a rich, and wide-reaching dataset that offers insight into atmospheric processes in northern Alaska. This report details the results of a nine-year research project (2015–2024) supported by the DOE Atmospheric Systems Research (ASR) program, that leverages data from ARM’s deployment of observing facilities at Utqiaġvik (known as the North Slope of Alaska, or NSA, site) and Oliktok Point, Alaska. The project was conducted in two phases: - Phase 1 (2015–2019): Focused on understanding key atmospheric processes at Oliktok Point, including cloud formation, high-latitude precipitation, aerosol-cloud interactions, and cloud properties. - Phase 2 (2019–2024): Extended the research to the broader North Slope region, using data from both Oliktok Point and Utqiaġvik. Topics explored included surface energy budgets, atmospheric stability, ice nucleation processes, and microphysics in Arctic clouds. The project resulted in numerous research products, including 50 peer-reviewed publications and dissertations, 169 presentations, and 10 data products. These products cover a variety of topics, including: - Cloud Macro- and Microphysical Properties: Arctic clouds play a crucial role in energy transfer, and accurate representation in models is critical. The study explored cloud transitions, ice crystal shapes, and dual-wavelength radar data to understand ice crystal habits and size distributions. - Aerosol Properties and Processes: The team examined aerosol sources in the Arctic, including industrial emissions and natural sources. Observations showed significant spatial gradients in aerosol concentrations due to human activities and wildfire smoke. The influence of aerosols on cloud formation and the surface energy budget was also assessed. - Aerosol-Cloud Interactions: Research revealed that aerosols might suppress cloud ice production, affecting cloud radiative forcing and precipitation. The impact of local industrial emissions on cloud properties was also investigated. - Contextualizing the North Slope of Alaska in the context of the broader Arctic: To understand broader trends, the project evaluated large-scale circulation patterns and the influence of weather systems on the Arctic. Studies indicated that large-scale processes play a significant role in temperature patterns and the timing of snowmelt. - Advancing ARM Observational and Modeling Capabilities: The project developed new radar data products and advanced measurement techniques, including clutter mitigation and drizzle detection. Uncrewed aerial systems (UAS) and tethered balloon systems (TBS) were deployed to gather detailed atmospheric data. Additionally, the project supported 10 early career scientists, providing training and mentorship to undergraduate interns, graduate students, postdoctoral researchers, and early career researchers. These efforts contributed to the advancement of ARM research capabilities and fostered a new generation of scientists skilled in Arctic atmospheric research. Ultimately, this ASR-supported project has provided valuable insights into Arctic atmospheric processes and their broader climate implications. Recommendations for future work include continuing support for long-term observing at Arctic locations to foster additional research, further exploration of aerosol-cloud interactions and the potential impacts of enhanced industrialization of the Arctic, and expanded use of uncrewed systems to gather data in this remote and harsh environment. Additionally, the data products developed by this work, and the data products developed through the ARM infrastructure, leave a treasure-trove of additional information that should be explored for many years to come to gain additional insight into physical processes in the Arctic atmosphere that drive the rapid changes occurring in at high latitudes and their global impact.

58 GEOSCIENCES↗

DOE OSTI2025

AERO-MAP: a data compilation and modeling approach to understand spatial variability in fine- and coarse-mode aerosol composition

Abstract. Aerosol particles are an important part of the Earth climate system, and their concentrations are spatially and temporally heterogeneous, as well as being variable in size and composition. Particles can interact with incoming solar radiation and outgoing longwave radiation, change cloud properties, affect photochemistry, impact surface air quality, change the albedo of snow and ice, and modulate carbon dioxide uptake by the land and ocean. High particulate matter concentrations at the surface represent an important public health hazard. There are substantial data sets describing aerosol particles in the literature or in public health databases, but they have not been compiled for easy use by the climate and air quality modeling community. Here, we present a new compilation of PM2.5 and PM10 surface observations, including measurements of aerosol composition, focusing on the spatial variability across different observational stations. Climate modelers are constantly looking for multiple independent lines of evidence to verify their models, and in situ surface concentration measurements, taken at the level of human settlement, present a valuable source of information about aerosols and their human impacts complementarily to the column averages or integrals often retrieved from satellites. We demonstrate a method for comparing the data sets to outputs from global climate models that are the basis for projections of future climate and large-scale aerosol transport patterns that influence local air quality. Annual trends and seasonal cycles are discussed briefly and are included in the compilation. Overall, most of the planet or even the land fraction does not have sufficient observations of surface concentrations – and, especially, particle composition – to characterize and understand the current distribution of particles. Climate models without ammonium nitrate aerosols omit ∼ 10 % of the globally averaged surface concentration of aerosol particles in both PM2.5 and PM10 size fractions, with up to 50 % of the surface concentrations not being included in some regions. In these regions, climate model aerosol forcing projections are likely to be incorrect as they do not include important trends in short-lived climate forcers.

Mahowald, Natalie M. (ORCID:000000022873997X)↗

DOE OSTI2024

Increased accuracy and signal-to-noise ratio through recent improvements in infra-red video bolometer fabrication and calibration

The infra-red video bolometer (IRVB) is a diagnostic equipped with an infra-red camera that measures the total radiated power in thousands of lines of sight within a large field of view. Recently validated in MAST-U [Fderici et al., Rev. Sci. Instrum. 94, 033502 (2023)], it offers a high spatial resolution map of the radiated power in the divertor region, where large gradients are expected. The IRVB’s sensing element comprises a thin layer of high Z absorbing material, typically platinum, usually coated with carbon to reduce reflections [Peterson et al., Rev. Sci. Instrum. 79, 10E301 (2008)].Here, the possibility of using a relatively inert material such as titanium, is explored that can be produced in layers up to 1 μm compared to 2.5 μm for Pt and then coat it with Pt of the desired thickness (0.3 μm per side here) and carbon. This leads to a higher temperature signal (about 3 times) and better spatial resolution (about 4 times), resulting in higher accuracy in the measured power [Peterson et al., Rev. Sci. Instrum. 79, 10E301 (2008)]. This assembly is also expected to improve foil uniformity, as the Pt layer is obtained via deposition rather than mechanical processes [Mukai et al., Rev. Sci. Instrum. 87, 2014 (2016)].Given its multi-material composition, measuring the thermal properties of the foil assembly is vital. Various methods using a calibrated laser as a heat source have been developed, analyzing the temperature profile shape [Sano et al., Plasma and Fusion Res. 7, 2405039 (2012)] and [Mukai et al., Rev. Sci. Instrum. 89, 10E114 (2018)] or fitting the calculated laser power for different intensities and frequencies [Fderici et al., Rev. Sci. Instrum. 94, 033502 (2023)]. Here, a simpler approach is presented, which relies on analyzing the separate components of the foil heat equation for a single laser exposure in a given area. This can then be iterated over the entire foil to capture local deviations.

Magnetic Fusion Energy↗

DOE OSTI2025

Research in Theoretical Particle Physics: Neutrino Masses and The Origin of CP-Violation

The main goal of this project was to investigate the theories of neutrino masses at the low scale and the origin of CP-violation in physics beyond the Standard Model. The origin of neutrino masses is one of the most pressing issues in particle physics. In this proposal, we investigated the theories for neutrino masses based on local total lepton number. In these theories anomaly cancellation predicts the existence of extra fermions with lepton number, and one of them is a good dark matter (DM) candidate. The cosmological constraints on the DM relic density implies that the lepton number symmetry breaking scale must be below the multi-TeV scale. Therefore, one can hope to test the origin of neutrino masses in current or future experiments. We investigated in great detail the anomaly cancellation in these gauge theories, study the different mechanisms for neutrino masses, study the predictions for direct and indirect dark matter experiments. Since these theories predict new sources of CP violation, we investigated the predictions for the electric dipole moments (EDM). The Higgs decays and the different signatures at the Large Hadron Collider were investigated in great detail. Finally, we studied the possible baryogenesis mechanisms in these theories in agreement with the EDM, DM and collider constraints. The origin of CP violation in the Standard Model is unknown. In this proposal, we investigated the simplest mechanisms for spontaneous CP-violation to explain the CP-violation in the CKM matrix and the value of the QCD vacuum angle. We discussed the Nelson-Barr mechanism in gauge theories predicting vector-like quarks from anomaly cancellation such as theories for local baryon number. We discussed the Bento-Branco-Parada mechanism in gauge theories to explain the CP-Violation in the CKM matrix. We will investigate models with two Higgs doublets in the context of the minimal theory for quark-lepton unification. We will show the non-decoupling effects in the Higgs sector, the main constraints coming from flavour violating processes when the Yukawa couplings are related by the gauge symmetry in theories for quark-lepton unification. We will investigate the predictions for electric dipole moments in these theories. The possibility to have successful baryogenesis was investigated. Finally, we investigated the relation between CP-violation in the quark and leptonic sectors. The future results from these studies could help us to understand two main issues in physics beyond the Standard Model: The Origin of Neutrino Masses and CP-violation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2026

Building Energy Analysis of Manufactured and Multifamily Housing Types in Juneau, Alaska

This report details the results of building energy modeling analysis evaluating the potential energy savings, economic outcomes, and grid-level electricity reduction associated with cold climate air source heat pump (ccASHP) adoption across multifamily and manufactured housing (MMFH) building typologies in the City and Borough of Juneau (CBJ). Three building archetypes were evaluated: multifamily 4-plex apartments, multifamily 8-plex apartments, and manufactured housing units. Building energy models were developed using OpenStudio-HPXML and calibrated to actual utility consumption data and local meteorological data from the Juneau International Airport weather station using an automated calibration tool following the BPI-2400-S-2015 v.2 standard for model calibration. Occupant behaviors present the greatest variability in successful calibrations. Calibrated models were benchmarked against a baseline electric resistance heating condition, with the selected ccASHP modeled as the retrofit condition and typical meteorological year weather data for all results generation.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2026

Shear-free, inhomogeneous turbulence in a stably stratified fluid

High-resolution large eddy simulations are conducted of locally forced, shear-free turbulence in the presence of an initially sharp density interface. The simulations are reminiscent of oscillating grid turbulence experiments used to isolate the effect of turbulent diffusion and entrainment from background shear. By simulating such a flow we avoid common challenges of the experiments such as secondary-flow contamination due to sidewall effects and the inevitable interaction of the stratifying agent and forcing region. To address the latter concern, we add a heating term (potential energy sink) to the governing equations in the forcing layer, thereby preventing a heat flux through the source region. This modification sets up a continuous stratification in the mixed layer that is often assumed to be negligible in experiments. Despite this difference, we are able to make meaningful comparisons in terms of the overall entrainment rate, which varies as a power law with a turbulent Richardson number. Two exponents, −2 and −1, are measured depending on the definition of the Richardson number and entrainment rate used. The definition leading to −1 is consistent with most experiments, and we argue it is the superior choice if one is able to measure the relevant quantities. We also verify the self-similar scaling of turbulence velocity and length scales in the homogeneous fluid and propose ‘inner’ and ‘outer’ scalings for the stratified cases based on a local Froude number. The detailed scaling results are useful for turbulence model validation.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Modeling High Current Pulsed Discharge in AA Battery Cathodes: The Effect of Localized Charging during Rest

During high current operation, substantial heterogeneity develops within battery cathodes, particularly when their thickness is large. Heterogeneity relaxation during subsequent rest is important for understanding battery performance under pulsed conditions. Localized charge balancing phenomena within batteries at zero net current are not well understood and merit investigation. In this work, the heterogeneity within cathodes of commercial alkaline Zn–MnO 2 batteries is measured during discharge and monitored during rest using energy dispersive X-ray diffraction (EDXRD). Significant gradients in protonation form during discharge and partially relax under rest. It is demonstrated that the proton gradient relaxation is through local redox activity at zero net current, where local (de)protonation works to redistribute charge across the cathode thickness. To support this redox-based relaxation, a fundamental kinetic study on prismatic MnO 2 cathodes is conducted to determine an appropriate model to describe both discharge and charge kinetics of MnO 2 . These kinetics are incorporated into a computational model to simulate the proton gradient formation and partial relaxation under identical discharge conditions as the operando EDXRD experiments. Model and experimental data are found to be in excellent agreement, correctly predicting localized charge balancing at rest.

Batteries↗

DOE OSTI2025

A dataset for understanding self-reported patterns influencing residential energy decisions

Household occupant behavior and decision-making dynamics substantially impact technology uptake and residential building energy performance. Although significant research underscores the importance of social science in energy studies, few public data with representative samples on household energy decision-making patterns are available. The dataset (UPGRADE-E: Understanding Patterns Guiding Residential Adoption and Decisions about Energy Efficiency) presents 9,919 responses from U.S. residents of single-family and small multifamily homes. Derived from a national-scale internet survey, the dataset contains 391 variables: demographics, building characteristics, home modifications, willingness to adopt new technologies, motivations for making changes, barriers, program participation, trusted information sources, and energy scenarios. Responses were validated via internal consistency checks and comparison with other U.S. national scale datasets. UPGRADE-E advances knowledge of household energy related decision-making, tying demographics, home modifications, and self-reported cognitive drivers together at a scale and breadth that has not been previously achieved. Policymakers and researchers at local, regional, and national levels may leverage this dataset to understand drivers influencing the adoption of key technologies in U.S. homes.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2024

Monoatomic orbital-based one-dimensional topological crystalline insulator

The bulk-boundary correspondence in topological crystalline insulators (TCIs) links the topological properties of the bulk to robust observables on the edges, e.g., the existence of robust edge modes or fractional charge. In one dimension, TCIs protected by reflection symmetry have been realized in a variety of systems in which each unit cell has spatially distributed degrees of freedom (SDOF). However, these realizations exhibit sensitivity of the resulting edge modes to variations in edge termination and to the local breaking of the protective spatial symmetries by inhomogeneity. Here we demonstrate topologically protected edge states in a monoatomic, orbital-based TCI that mitigates both of these issues. By collapsing all SDOF within the unit cell to a singular point in space, we eliminate the ambiguity in unit-cell definition and hence remove a prominent source of boundary termination variability. The topological observables are also more tolerant to disorder in the orbital energies. To validate this concept, we experimentally realize a lattice of mechanical resonators where each resonator acts as an “atom” that harbors two key orbital degrees of freedom having opposite reflection parity. Finally, our measurements of this system provide direct visualization of the sp-hybridization between orbital modes that leads to a nontrivial band inversion in the bulk.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2025

"Mining" for Critical Minerals: Critical Minerals from Fossil Energy Waste Byproducts

NETL researcher Mengling Stuckman is an invited speaker for the panel discussion session of "Mining for Critical Minerals" at the Marcellus Shale Coalition event, "Shale 2.0: Learn the Facts about Upstream, Midstream and Downstream". Recent studies from DOE have shown that produced water and drill cuttings from the development of unconventional shale in Appalachia has a significant source of valuable critical minerals and will support bolstering America's supply chain security, putting Pennsylvania in a unique position to capitalize. The panel discussion facilitates obtaining an overview of pipeline capacity needs, downstream users for natural gas and effectively educating and engaging the public relevant to the Marcellus Shale community. The event also offers opportunities for local oil and gas industries, water and waste management companies to work with NETL and participate in FECM’s Critical Mineral program. Industrial feedbacks and participation as outcomes of this invited talk will accelerate the technology and knowledge transfer for the DOE’s Critical Mineral program and for DOE’s mission to unleash American Energy and lead in energy innovation.

critical minerals↗

DOE OSTI2025

Stabilizing dynamic subsea power cables using Bi-stable nonlinear energy sinks

This study investigates vibration mitigation of dynamic subsea cables through passive bi-stable nonlinear energy sinks (B-NESs). These devices suppress vibration energy in a broadband way, and can be regarded as extensions of classical linear tuned mass dampers (TMDs) which are narrowband devices. Through the open-source MoorDyn library, we simulated the vibrations of a vertical subsea cable equipped with a set of B-NESs. Multi-objective optimization was performed to detect the B-NES parameters for optimal mitigation of the cable vibrations. Advanced signal processing verified the efficacy of the optimized B-NESs not only to rapidly absorb and locally dissipate vibration energy, but also to nonlinearly scatter vibration energy from low to high frequencies within the cable itself. This last feature is especially beneficial for vibration mitigation of the undersea cable, as at higher frequencies the cable vibrations exhibit drastically reduced amplitudes and are more effectively dissipated by inherent structural damping and hydrodynamic radiation damping. This contrasts with traditional TMDs which can mitigate vibration only at a single frequency. Furthermore, our robustness study confirms the B-NES's effectiveness under even varying environmental conditions. Overall, the B-NES's capacity for broadband vibration mitigation renders it a promising retrofit solution for improving the performance and operational safety of dynamic power cables in offshore wind farms and other marine applications.

17 WIND ENERGY↗

DOE OSTI2026

AstraAI v1

AstraAI is an open-source, structure-aware AI coding agent designed for large scientific and DOE-HPC codebases such as AMReX-based applications. Unlike general-purpose coding assistants, AstraAI combines retrieval-augmented generation (RAG) with compiler-level Abstract Syntax Tree (AST) analysis to perform precise, scope-constrained code modifications. It identifies exact function spans, enforces locality of edits, and maintains cross-file invariants, enabling deterministic and build-safe transformations in complex C++/GPU environments. AstraAI is intended for developers working on large, evolving HPC frameworks where correctness, reproducibility, and structural integrity are critical. Typical use cases include modifying physics kernels, updating GPU device lambdas, and performing multi-file refactors without breaking compilation or runtime semantics. Compared to conventional LLM-based coding agents - even those with repository access - AstraAI provides structural guarantees rather than free-form text patches. It minimizes unintended diffs, prevents scope drift, preserves formatting and build stability, and reduces structural hallucinations. By integrating compiler tooling directly into the generation loop, AstraAI transforms AI-assisted coding from probabilistic text editing into deterministic, structure-preserving program transformation suitable for mission-critical scientific software.

Natarajan, Mahesh [Lawrence Berkeley National Labo↗

DOE OSTI2025

GeoGridFusion (Open-Source Geospatial Toolkit for Solar Data Integration) [SWR-25-19]

GeoGridFusion facilitates the usage and storage of gridded geospatial satellite data by users outside of the National Renewable Lab (NREL), particularly those without access to high-performance computing (HPC) resources. This tool builds on work done by the PVDegradationTools project for DuraMAT, with the goal of making our advancements from this project widely accessible. This repo contains utilities to allow for the storage of user downloaded geospatial weather data by providing a local datastore for storage and spatial queries, supporting large-scale analyses without the need for HPC resources.

Ford, Tobin [National Renewable Energy Laboratory ↗

DOE OSTI2024

Inferring the Focal Depths of Small Earthquakes in Southern California Using Physics-Based Waveform Features

Determining the depths of small crustal earthquakes is challenging in many regions of the world, because most seismic networks are too sparse to resolve trade-offs between depth and origin time with conventional arrival-time methods. Precise and accurate depth estimation is important, because it can help seismologists discriminate between earthquakes and explosions, which is relevant to monitoring nuclear test ban treaties and producing earthquake catalogs that are uncontaminated by mining blasts. Here, we examine the depth sensitivity of several physics-based waveform features for ~8000 earthquakes in southern California that have well-resolved depths from arrival-time inversion. We focus on small earthquakes (2 < M L < 4) recorded at local distances (<150 km), for which depth estimation is especially challenging. We find that differential magnitudes (M w /M L –M c ) are positively correlated with focal depth, implying that coda wave excitation decreases with focal depth. We analyze a simple proxy for relative frequency content, Φ≡log 10 (M 0 )+3log 10 (f c ), and find that source spectra are preferentially enriched in high frequencies, or “blue-shifted,” as focal depth increases. Here, we also find that two spectral amplitude ratios Rg 0.5–2 Hz/Sg 0.5–8 Hz and Pg/Sg at 3–8 Hz decrease as focal depth increases. Using multilinear regression with these features as predictor variables, we develop models that can explain 11%–59% of the variance in depths within 10 subregions and 25% of the depth variance across southern California as a whole. We suggest that incorporating these features into a machine learning workflow could help resolve focal depths in regions that are poorly instrumented and lack large databases of well-located events. Some of the waveform features we evaluate in this study have previously been used as source discriminants, and our results imply that their effectiveness in discrimination is partially because explosions generally occur at shallower depths than earthquakes.

58 GEOSCIENCES↗

DOE OSTI2025

Electricity Baseline 2022 Background Data and Log File

The ElectricityLCI v2 Python package (https://github.com/USEPA/ElectricityLCI/tree/v2.0) was used to generate the 2022 electricity baseline: a regionalized life cycle inventory model of U.S. electricity generation, consumption, and distribution using standardized facility and generation data. ElectricityLCI implements a local data store for downloading and accessing public data on an individual's computer. The data store follows the folder definition provided by USEPA's esupy Python package (https://github.com/USEPA/esupy), which utilized the appdirs Python dependency (https://pypi.org/project/appdirs/). This submission includes the background data used to generate the 2022 electricity baseline inventory. Each zip archive stores the source files as found in their data stores. Sub-folders in each of the data stores are archived separately. For example, stewi.zip contains the JSON files, while stewi.facility.zip is the 'facility' sub-folder of stewi data store that stores the parquet files. To reproduce the data store, extract each zip file and drag-and-drop sub-folders in to their appropriate root folders to recreate the data stores, then copy the root folders to your data store folder (as returned by running the following on the command line: `python -c "import appdirs; print(appdirs.user_data_dir())"`). The main five data stores include: 'electricitylci', 'facilitymatcher', 'fedelemflowlist', 'stewi', and 'stewicombo'. The log file generated by the 2022 model run is also included, which contains the statements at the DEBUG level and above.

Electricity; LCA; data inventory↗

DOE OSTI2024

SMR Current Status: Development Needs and Global Perspectives

Defined as nuclear reactors with a power output up to 300 megawatts electrical (MWe) by the International Atomic Energy Agency (IAEA) and targeted for multipurpose applications, small modular reactors (SMRs) have been recognized as a very promising, clean, affordable, and sustainable energy source by many countries. At present, more than 80 SMRs are under design, development, demonstration, deployment, and beyond (4D+) phases worldwide. This study focuses on the current world status of SMRs and focuses on the necessary developments to accelerate the process of adopting SMRs as a major energy source globally. SMRs are not a new concept, but they do represent a new vision for older concepts if the challenges inherent within them are mitigated with strategic and realistic solution approaches. The major challenges for SMRs 4D+ like any new reactors are: (a) qualifying the advanced fuel-to-reactor design; (b) supporting rapid scaled/prototypic experimentations; (c) maintaining local and global codes, standards, and licensing; (d) supply chain issues;(e) effective cradle-to-grave nuclear fuel cycle and fuel material transportation, and (f) mitigating financial and environmental risks. These upfront challenges can be mitigated with a synergistic solution approach among the various stakeholders: industry, academia, research, government, and international entities.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗