Search NASA⌕ Search

SEARCH · Search NASA

Results for “Spreading models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19

The Response of the Ozone Layer Under Abrupt 4xCO2 in CMIP6

Previous studies indicate a possible role of stratospheric ozone chemistry feedbacks in the climate response to 4xCO2, either via a reduction in equilibrium climate sensitivity (ECS) (Nowack et al., 2015), or via changes in the tropospheric circulation (Chiodo and Polvani, 2017). However, these effects are subject to uncertainty. Part of the uncertainty may stem from the dependency of the feedback on the pattern of the ozone response, as the radiative efficiency of ozone largely depends on its vertical distribution (Lacis et al., 1990). Here, an analysis is presented of the ozone layer response to 4xCO2 in chemistry–climate models (CCMs) which participated to CMIP intercomparisons. In a previous study using CMIP5 models, it has been shown that under 4xCO2, ozone decreases in the tropical lower stratosphere, and increases over the high latitudes and throughout the upper stratosphere. It was also found that a substantial portion of the spread in the tropical column ozone is tied to inter-model spread in tropical upwelling, which is in turn partly tied to ECS (Chiodo et al., 2018). Here, we revisit this connection using4xCO2 data from CMIP6, thereby exploiting the larger number of CCMs than in CMIP5. In addition, we explore the linearity of the ozone response, by complementing the analysis with simulations using transient CO2 forcing (1pc/year). We show that the pattern of the ozone response in is similar to CMIP5. In some models (e.g. WACCM), we find larger ozone responses in CMIP6 than in CMIP5, partly because of the larger ECS and thus larger upwelling response in the tropical pipe. In this presentation, we will discuss the relationship between radiative forcing, transport and ozone, as well as further implications for CMIP6 models.

Ozone layer↗

The Response of the Ozone Layer Under Abrupt 4xCO2 in CMIP6

Previous studies indicate a possible role of stratospheric ozone chemistry feedbacks in the climate response to 4xCO2, either via a reduction in equilibrium climate sensitivity (ECS) (Nowack et al.,2015), or via changes in the tropospheric circulation (Chiodo and Polvani, 2017). However, these effects are subject to uncertainty. Part of the uncertainty may stem from the dependency of the feedback on the pattern of the ozone response, as the radiative efficiency of ozone largely depends on its vertical distribution (Lacis et al., 1990). Here, an analysis is presented of the ozone layer response to 4xCO2 in chemistry–climate models (CCMs) which participated to CMIP intercomparisons. In a previous study using CMIP5 models, it has been shown that under 4xCO2, ozone decreases in the tropical lower stratosphere, and increases over the high latitudes and throughout the upper stratosphere. It was also found that a substantial portion of the spread in the tropical column ozone is tied to inter-model spread in tropical upwelling, which is in turn tied to ECS (Chiodo et al., 2018). Here, we revisit this connection using 4xCO2 data from CMIP6, thereby exploiting the larger number of CCMs than in CMIP5. In addition, we explore the linearity of the ozone response, by complementing the analysis with simulations using lower CO 2 forcing levels (2xCO2). We show that the pattern of the ozone response in is similar to CMIP5. In some models (e.g. WACCM), we find larger ozone responses in CMIP6 than in CMIP5, partly because of the larger ECS and thus larger upwelling response in the tropical pipe. In this presentation, we will discuss the relationship between radiative forcing, transport and ozone, as well as further implications for CMIP6 models.

Ozone layer↗

Predictive Modeling of Fast-Curing Thermosets in Nozzle-Based Extrusion

This work presents an approach to modeling the dynamic spreading and curing behavior of thermosets in nozzle-based extrusions. Thermosets cover a wide range of materials, some of which permit low-temperature processing with subsequent high-temperature and high-strength working properties. Extruding thermosets may overcome the limited working temperatures and strengths of conventional thermoplastic materials used in additive manufacturing. This project aims to produce technology for the fabrication of thermoset-based structures leveraging advances made in nozzle-based extrusion, such as fused deposition modeling (FDM), material jetting, and direct writing. Understanding the synergistic interactions between spreading and fast curing of extruded thermosetting materials will provide essential insights for applications that require accurate dimensional controls, such as additive manufacturing [1], [2] and centrifugal coating/forming [3]. Two types of thermally curing thermosets -- one being a soft silicone (Ecoflex 0050) and the other being a toughened epoxy (G/Flex) -- served as the test materials in this work to obtain models for cure kinetics and viscosity. The developed models align with extensive measurements made with differential scanning calorimetry (DSC) and rheology. DSC monitors the change in the heat of reaction, which reflects the rate and degree of cure at different crosslinking stages. Rheology measures the change in complex viscosity, shear moduli, yield stress, and other properties dictated by chemical composition. By combining DSC and rheological measurements, it is possible to establish a set of models profiling the cure kinetics and chemorheology without prior knowledge of chemical composition, which is usually necessary for sophisticated mechanistic modeling. In this work, we conducted both isothermal and dynamic measurements with both DSC and rheology. With the developed models, numerical simulations yielded predictions of diameter and height of droplets, along with width and height of extruded lines cured at varied temperatures. Experimental results carried out on a goniometric platform and a nozzle-based 3D printer showed agreement with the numerical simulations. Finally, this presentation will show how the models are adaptable to the planning of tool paths and designs in additive manufacturing.

Xie, Jingjin↗

Earth System Grid Federation: Federated and Integrated Climate Data from Multiple Sources. IN: Earth System Modeling, Volume 6

In climate science, the quantity of data in use by 2020 is expected to be in the hundreds of exabytes (EB, where 1 exabyte = 1018 bytes). Current and future heterogeneous climate data will be distributed around the globe and must be harnessed to find solutions to mission-critical problems. Additionally, more requirements and more constraints are needed to expand and integrate new modeling capabilities and tasks, such as climate prediction, uncertainty quantification (UQ) of model performance, test-bed development, and assimilation of more diverse data sets. These data exploration tasks can be complex and time-consuming, and frequently involve numerous resources spread throughout the modeling and observational climate communities. Staff expertise and core competencies must therefore be flexibly applied to multiple projects and programs to accommodate more complex applications and state-of-the-art science analysis, while allowing resources to be adapted to address future areas of interest in climate research.

Climate Project↗

The Dependence of Mean Climate State on Shortwave Absorption by Water Vapor

Abstract State-of-the-art climate models exhibit significant spread in the climatological value of atmospheric shortwave absorption (SWA). This study investigates both the possible causes and climatic impacts of this SWA intermodel spread. The intermodel spread of global-mean SWA largely originates from the intermodel difference in water vapor shortwave absorptivity. Hence, we alter the water vapor shortwave absorptivity in the Community Earth System Model, version 1, with the Community Atmosphere Model, version 4 (CESM1-CAM4). Increasing the water vapor shortwave absorptivity leads to a reduction in global-mean precipitation and a La Niña–like cooling over the tropical Pacific. The global-mean atmospheric energy budget suggests that the precipitation is suppressed as a way to compensate for the increased SWA. The precipitation reduction is driven by the weakened surface winds, stabilized planetary boundary layer, and surface cooling. The La Niña–like cooling over the tropical Pacific is attributed to the zonal asymmetry of climatological evaporative damping efficiency and the low cloud enhancement over the eastern basin. Complementary fixed SSTs simulations suggest that the latter is more fundamental and that it primarily arises from atmospheric processes. Consistent with our experiments, the CMIP5/6 models with a higher global-mean SWA tend to produce tropical Pacific toward a more La Niña–like mean state, highlighting the possible role of water vapor shortwave absorptivity for shaping the mean-state climate patterns.

Kim, Hanjun↗

Northern Winter Climate Change: Assessment of Uncertainty in CMIP5 Projections Related to Stratosphere-Troposphere Coupling

Future changes in the stratospheric circulation could have an important impact on northern winter tropospheric climate change, given that sea level pressure (SLP) responds not only to tropospheric circulation variations but also to vertically coherent variations in troposphere-stratosphere circulation. Here we assess northern winter stratospheric change and its potential to influence surface climate change in the Coupled Model Intercomparison Project-Phase 5 (CMIP5) multimodel ensemble. In the stratosphere at high latitudes, an easterly change in zonally averaged zonal wind is found for the majority of the CMIP5 models, under the Representative Concentration Pathway 8.5 scenario. Comparable results are also found in the 1% CO2 increase per year projections, indicating that the stratospheric easterly change is common feature in future climate projections. This stratospheric wind change, however, shows a significant spread among the models. By using linear regression, we quantify the impact of tropical upper troposphere warming, polar amplification, and the stratospheric wind change on SLP. We find that the intermodel spread in stratospheric wind change contributes substantially to the intermodel spread in Arctic SLP change. The role of the stratosphere in determining part of the spread in SLP change is supported by the fact that the SLP change lags the stratospheric zonally averaged wind change. Taken together, these findings provide further support for the importance of simulating the coupling between the stratosphere and the troposphere, to narrow the uncertainty in the future projection of tropospheric circulation changes.

climate change↗

PORE-SCALE MODEL FOR REACTIVE TRANSPORT AND BIOMASS GROWTH

A Lagrangian multi-scale particle model based on smoothed particle hydrodynamics (SPH) was used to simulate pore-scale flow, reactive transport and biomass growth in fractured porous media. The biomass growth was controlled by double Monod kinetics. The deformation and attachment and detachment of biomass was modeled through a combination of pair-wise short range repulsive and medium range attractive forces and hydrodynamics forces resulting from the fluid flow. The multi-scale model was compared with a cellular automata model that explicitly assumed that biomass can grow only in directions with shear stresses smaller than a critical value. For the set of parameters used in the simulations both cellular automata and multi-scale models predicted that: 1) biomass grows in the shape of bridges connecting soil grains and oriented in the direction of flow so as to minimize resistance to the fluid flow; 2) the solution containing electron donors and acceptors gets rapidly depleted as it enters the fractured porous domain; 3) and the biomass growth occurs mainly at the entrance into the fracture. The multi-scale model predicted that biomass would spread uniformly along the walls of the fracture while the cellular automata model predicted that the most of the biomass would concentrate at the entrance of the fracture. The proposed multi-scale model shows that biomass can spread along preferential flow paths and seal off a porous matrix creating biogeochemical barriers to contaminant migration and that attachment/detachment of biomass is an important mechanism in biomass spreading and can not be disregarded in computational models.

09 BIOMASS FUELS↗

Flame spreading over a thin solid in low-speed concurrent flow- Drop tower experimental results and comparison with theory

Flame spread over thin paper samples in low-speed concurrent flow is experimentally investigated in a 5.18 s drop tower. In the experiment, the oxygen molar percentage is varied from 30% down to the flame extinction limits and the forced flow velocity from 5.29 cm/s down to the quenching limits. Motion pictures are taken to observe flame shape, color, size, and spread rates. These quantities are compared with a theoretical model describing concurrent flame spread over thin solids in low-speed flows. The paper also discusses the similarity and difference between concurrent-flow and opposed-flow flame spread in microgravity and between low-speed and high-speed concurrent-flow flame spread. Finally the limitations of using a drop tower for flame spread research is assessed.

Grayson, G. D.↗

Origin and turbulence spreading of plasma blobs

The formation of plasma blobs is studied by analyzing their trajectories in a gyrofluid simulation in the vicinity of the separatrix. Most blobs arise at the maximum radial electric field outside the separatrix. In general, blob generation is not bound to one particular radial position or instability. A simple model of turbulence spreading for the scrape-off layer is derived. The simulations show that the blob dynamics can be represented by turbulence spreading, which constitutes a substantial energy drive for far scrape-off layer turbulence and is a more suitable quantity to study blob generation compared to the skewness.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

In Pursuit of Improving Airburst and Ground Damage Predictions: Recent Advances in Multi-Body Aerodynamic Testing and Computational Tools Validation

An airburst from a large asteroid during entry can cause significant ground damage. The damage depends on the energy and the altitude of airburst. Breakup of asteroids into fragments and their lateral spread have been observed. Modeling the underlying physics of fragmented bodies interacting at hypersonic speeds and the spread of fragments is needed for a true predictive capability. Current models use heuristic arguments and assumptions such as pancaking or point source explosive energy release at pre-determined altitude or an assumed fragmentation spread rate to predict airburst damage. A multi-year collaboration between German Aerospace Center (DLR) and NASA has been established to develop validated computational tools to address the above challenge.

Asteroid↗

On the flame spreading over a polymer surface

The characteristics of flame propagation along the interface between a solid fuel and a gaseous oxidizer are considered. It is found that difficulties in a study of this problem are related to the eigenvalue character of the relative velocity of the flame with respect to the oxidizer flow. In the proposed model of flame spreading the difficulties are overcome by retaining the ellipticity of the governing equations and by taking the surface pyrolysis into account. The solution procedure makes use of a sink-source approach and the Fourier-transform method. Flame propagation velocity data computed on the basis of the described approach are compared with experimental results.

Ohki, Y.↗

Gravity-driven deformation of the crust on Venus

Intense horizontal deformation features are observed on the surface of Venus despite the apparent absence of terrestrial-style plate tectonics. High surface temperature, low erosion rate, and regions of elevated terrain suggest that gravity spreading may be responsible for some of these features. Gravity spreading on the Earth is known to cause extensive deformation in certain thin-skinned tectonic regions, where the uppermost layers become detached along a decollement. While the high pore pressures and soft sedimentary rocks frequently observed along decollements on the Earth are not plausible for Venus, temperature induced regions of ductile deformation may exist. Simple viscous models of gravity spreading above a ductile region of the crust are developed to examine the effects of rheology, thermal gradient, surface slope and crustal thickness on deformation. For a reasonable range of parameters, the models show that surface-slope-driven ductile deformation at relatively shallow depths in the crust is possible and may be capable of detaching the uppermost rigid portion of the crust, resulting in horizontal translation.

Smrekar, Suzanne↗

The coronavirus spread: the Italian case

A model based on population growth, chaotic maps and turbulent flows is applied to the spread of Coronavirus for each Italian region in order to obtain useful information and help to contrast it. We divide the regions into different risk categories and discuss anomalies. The worst cases are confined between the Appenine and the Alps mountain ranges but the situation seem to improve closer to the sea. The Veneto region gave the most efficient response so far and some of their resources could be diverted to other regions, in particular more tests to the Lombardia, Liguria, Piemonte, Marche and V. Aosta regions, which seem to be worst affected. We noticed worrying anomalies in the Lazio, Campania and Sicilia regions to be monitored. We stress that the number of fatalities we predicted on March 12 has been confirmed daily by the bulletins. This suggests a change of strategy in order to reduce such number maybe moving the weaker population (and negative to the virus test) to beach resorts, which should be empty presently. The ratio deceased/positives on April 4, 2020 is 5.4% worldwide, 12.3% in Italy, 1.4% in Germany, 2.7% in the USA, 10.3% in the UK and 4.1% in China. Furthermore, these large fluctuations should be investigated starting from the Italian regions, which show similar large fluctuations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The MELTSPREAD Code for Modeling of Ex-Vessel Core Debris Spreading Behavior

MELTSPREAD3 is a transient 1-D computer code that has been developed to predict the gravity-driven flow and freezing behavior of molten reactor core materials (corium) in containment geometries. Predictions can be made for corium flowing across surfaces under either dry or wet cavity conditions. The spreading surfaces that can be selected are steel, concrete, a user-specified material (e.g., a ceramic), or an arbitrary combination thereof. The corium can have a wide range of compositions of reactor core materials that includes distinct oxide phases (predominantly UO 2 , ZrO 2 and steel oxides) plus metallic phases (predominantly Zr and steel).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

On the Role of SST Forcing in the 2011 and 2012 Extreme U.S. Heat and Drought: A Study in Contrasts

This study compares the extreme heat and drought that developed over the United States in 2011 and 2012 with a focus on the role of SST forcing. Experiments with the NASA GEOS-5 atmospheric general circulation model show that the winter/spring response over the U.S. to the Pacific SST is remarkably similar for the two years despite substantial differences in the tropical Pacific SST. As such, the pronounced winter and early spring temperature differences between the two years (warmth confined to the south in 2011 and covering much of the continent in 2012) primarily reflect differences in the contributions from the Atlantic and Indian Oceans, with both acting to cool the east and upper mid-west during 2011, while during 2012 the Indian Ocean reinforced the Pacific-driven continental-wide warming and the Atlantic played a less important role. During late spring and summer of 2011 the tropical Pacific SST force a continued warming and drying over the southern U.S., though considerably weaker than observed. Nevertheless, the observed anomalies fall within the models intra-ensemble spread. In contrast, the rapid development of intense heat and drying over the central U.S. during June and July of 2012 falls outside the models intra-ensemble spread. The response to the SST (a northward expansion of a modest summer warming linked to the Atlantic) gives little indication that 2012 would produce record-breaking precipitation deficits and heat in the central Great Plains. A diagnosis of the 2012 observed circulation anomalies shows that the most extreme heat and drought was tied to the development of a stationary Rossby wave and an associated anomalous upper tropospheric high maintained by weather transients.

SST Forcing↗

Assessing the representation of the Australian carbon cycle in global vegetation models

Australia plays an important role in the global terrestrial carbon cycle on inter-annual timescales. While the Australian continent is included in global assessments of the carbon cycle such as the global carbon budget, the performance of dynamic global vegetation models (DGVMs) over Australia has rarely been evaluated. We assessed simulations of net biome production (NBP) and the carbon stored in vegetation between 1901 to 2018 from 13 DGVMs (TRENDY v8 ensemble). We focused our analysis on Australia's short-term (inter-annual) and long-term (decadal to centennial) terrestrial carbon dynamics. The TRENDY models simulated differing magnitudes of NBP on inter-annual timescales, and these differences resulted in significant differences in long-term vegetation carbon accumulation (–4.7 to 9.5 Pg C). We compared the TRENDY ensemble to several satellite-derived datasets and showed that the spread in the models' simulated carbon storage resulted from varying changes in carbon residence time rather than differences in net carbon uptake. Differences in simulated long-term accumulated NBP between models were mostly due to model responses to land-use change. The DGVMs also simulated different sensitivities to atmospheric carbon dioxide (CO 2 ) concentration, although notably, the models with nutrient cycles did not simulate the smallest NBP response to CO 2 . Our results suggest that a change in the climate forcing did not have a large impact on the carbon cycle on long timescales. However, the inter-annual variability in precipitation drives the year-to-year variability in NBP. We analysed the impact of key modes of climate variability, including the El Niño–Southern Oscillation (ENSO) and the Indian Ocean Dipole (IOD), on NBP. While the DGVMs agreed on sign of the response of NBP to El Niño and La Niña and to positive and negative IOD events, the magnitude of inter-annual variability in NBP differed strongly between models. In addition, we find that differences in the timing of simulated phenology and fire dynamics are associated with differences in simulated or prescribed vegetation cover and process representation. We further find model disagreement in simulated vegetation carbon, phenology, and apparent carbon residence time, indicating that the models have different types and coverage of vegetation across Australia (whether prescribed or emergent). Our study highlights the need to evaluate parameter assumptions and the key processes that drive vegetation dynamics, such as phenology, mortality, and fire, in an Australian context to reduce uncertainty across models.

54 ENVIRONMENTAL SCIENCES↗