Search NASA⌕ Search

SEARCH · Search NASA

Results for “polymers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Soft and Stretchable Thienopyrroledione–Based Polymers via Direct Arylation

π-conjugated polymers (CPs) that are concurrently soft and stretchable are needed for deformable electronics. Molecular-level modification of indacenodithiophene (IDT) copolymers, a class of CPs that exhibit high hole mobilities (μ hole ), is an approach that can help realize intrinsically soft and stretchable CPs. Numerous examples of design strategies to adjust the stretchability of CPs exist, but imparting softness is comparatively less studied. In this study, a systematic molecular weight (MW) series is constructed on a promising candidate for soft CPs, poly(indacenodithiophene-co-thienopyrroledione) (p(IDT C16- TPD C8 )), by optimizing direct arylation polymerization conditions in hopes of improving stretchability and μhole without significantly impacting softness. We found p(IDT C16- TPD C8 ) at a degree of polymerization of 32 shows high stretchability (crack onset strain, CoS > 100%) without significantly impacting softness (elastic modulus, E = 32 MPa), which to the best of our knowledge outperforms previously reported stretchable and soft CPs. To further study how molecular-level modifications impact polymer properties, a MW series of a new extended donor unit polymer, poly(indacenodithienothiophene-co-thienopyrroledione) (p(IDTT C16- TPD C8 )), was synthesized. The IDTT C16 copolymers did not result in a greater average μ hole when comparing between p(IDTT C16- TPD C8 ) and p(IDT C16- TPD C8 ) despite their higher crystallinity observed by GIWAXS. While these findings warrant further investigation, this study points toward unique charge transport properties of IDT-based polymers.

direct arylation polymerization↗
DOE OSTI2023

Polycarbonate‐Based Solid‐Polymer Electrolytes for Solid‐State Sodium Batteries

Solid-polymer electrolytes comprised of polypropylene carbonate (PPC) and varied sodium bis(fluorosulfonyl)imide (NaFSI) salt concentrations are investigated for implementation as a conductive solid polymer electrolyte into solid-state cathode composites utilizing a sodium-layered oxide active material. The ionic conductivity generally increases with NaFSI salt content, reaching ≈1 mS cm −1 at 80 °C at the highest salt concentration (PPC:NaFSI = 0.5:1). Through an all-in-one slurry casting method, Na 2/3 Ni 1/3 Mn 2/3 O 2 cathode composites are fabricated in which the dispersed PPC electrolyte acts as the primary binder. Enabled by a bilayer polymer electrolyte system, cycling performance with the PPC cathode electrolyte is optimized with respect to salt concentration and anode material. The best cyclability is achieved with a moderate salt concentration electrolyte (PPC:NaFSI = 5:1), showcasing an initial capacity of 83 mA h g −1 with a remarkable 80% capacity retention after 150 cycles at C/5 rate and 60 °C. The superior performance of the lower salt concentration electrolyte is attributed to better electrochemical stability, as confirmed by linear sweep voltammetry and online electrochemical mass spectrometry measurements. In conclusion, these results underscore the potential of carbonate-based polymer electrolytes and the importance of balancing electrolyte conductivity and stability in cell design.

25 ENERGY STORAGE↗
DOE OSTI2024

Reinforcement induced microcracking during the conversion of polymer-derived ceramics

This study investigates the role of discontinuous reinforcement on the microcracking of a preceramic polymer matrix during polymer to ceramic conversion. The material system comprised a carbosilane-based, preceramic polymer reinforced with mullite particles. The preceramic resin slurry was formulated for photopolymerization on a digital light projection 3D printer. Micro X-ray computed tomography, using a synchrotron light source, monitored a printed composite part during pyrolysis. The conversion of the carbosilane matrix into Si(O)C generated microcracks in the matrix that radially extended from particles. The likelihood of microcrack formation positively correlated with particle size. The largest particles (>10 4 µm 3 volume or >60 µm side length) always abutted microcracks, while the matrix surrounding smaller particles (<5 µm) was free of microcracks. Numerical calculations showed the particles resist the shrinking matrix during its conversion. This created tensile stresses within the matrix. The driving force for microcrack growth was also analyzed with regard to the influence of matrix material parameters, particle form-factor and crack length. These results reveal the need to consider the form factor of discontinuous reinforcements, with regard to the material properties of the polymer-derived ceramic, in order to reduce or eliminate defects in the final part.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Applying machine learning and quantum chemistry to predict the glass transition temperatures of polymers

Glass transition temperature (T g ) is important for understanding the physical and mechanical properties of a polymer material because it relates to the thermal energy required to transition between a hard glassy state and a soft rubbery one. Over the years, various models have been developed for predicting this thermal property from molecular structure to aid in designing novel polymers in selected classes. This work builds on those efforts by utilizing both machine learning (ML) and quantum chemistry (QC) techniques to develop models that can predict T g values from the molecular structure under different data availability scenarios and for a wide variety of polymer types. For the ML model, a graph convolutional network (GCN) was used to map topological polymer features; this model was trained against a dataset of more than 7500 T g values and resulted in a root mean square error (RMSE) of 38.1 °C. The QC-based regression model was trained on 83 T g values and produced an RMSE of 34.5 °C. In conclusion, this work demonstrated that while both model techniques produce accurate predictions and are suitable for different data availability scenarios, the QC-based regression model offered a more interpretable model framework with significantly less training data.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Investigation of competitive sorption and plasticization of hyperaged CANAL ladder polymers for acid gas purification

Identifying membrane materials that have exceptional separation performance and stability to complex CO 2 -containing mixtures is a pressing topic in separation science. In this work, the membrane separation performance for a recently discovered class of contorted polymers synthesized via catalytic arene-norbornene annulation (CANAL) polymerization is presented. These CANAL polymers achieve high CO 2 /CH 4 selectivity of 68 after physical aging (up to ∼1 year), which significantly augments the size-sieving capabilities of the membranes. Binary CO 2 /CH 4 and ternary H 2 S/CO 2 /CH 4 testing result in a 41 % and 50 % enhancement in selectivities, respectively, for hyperaged (∼1 year) contorted CANAL polymers, highlighting their size-sieving capabilities. The remarkably high CO 2 /CH 4 mixed-gas and combined acid gas (CAG, (CO 2 +H 2 S)/CH 4 ) selectivities of 88 and 95, respectively, for CANAL-Me-S 5 F in particular surpass both the 2018 CO 2 /CH 4 mixed-gas and CAG upper bounds. Performance stability was also investigated for high concentrations of CO 2 , revealing a reduction in CO 2 /CH 4 mixed-gas selectivity without compromising CO 2 permeability, suggesting strong sorption of CO 2 but minimal plasticization effects for short testing periods. In addition, time-dependent plasticization shows negligible effects on CO 2 /CH 4 mixed-gas selectivity despite an increase in CO 2 permeability when exposed to high concentrations of plasticizing CO 2 over an extended period of 170 h. This study provides valuable insights into hyperaged CANAL polymers and their performance in practical industrial processes.

03 NATURAL GAS↗
DOE OSTI2025

Ultra-selective CANAL Polymers for Hydrogen-based Membrane Separations after Long-Term Aging

Hydrogen is a critically important molecule in the chemicals and energy industries, driving the need for efficient purification technologies such as membrane-based separations. However, polymer membranes often suffer from physical aging, leading to decreased gas permeability over time. This study leverages the unique aging behavior of contorted microporous polymers, synthesized via catalytic arene-norbornene annulation (CANAL) polymerization, to enhance molecular sieving for H 2 separations. While prior studies demonstrated a 1000% increase in H 2 /CH 4 selectivity with minimal permeability loss over 150 days, we extend this investigation to hyperaged (∼1 year) CANAL polymers and evaluate their performance under various conditions of industrial relevance. We report a remarkable 6100% increase in H 2 /CH 4 selectivity and a 2400% improvement in H 2 /N 2 selectivity, with only a 55% decline in H 2 permeability. These membranes exhibit excellent long-term stability in binary and ternary gas mixtures and at elevated temperatures. Additionally, extended aging enhances H 2 /CO 2 selectivity beyond the 2008 upper bound due to improved size-sieving. High-temperature permeation experiments and grand canonical Monte Carlo simulations reveal that H 2 permeability increases from 570 to 3500 barrer as the temperature rises from 35 °C to 190 °C, while H 2 /CO 2 selectivity declines from 14 to 3 due to the higher diffusion activation energy of CO 2 . Despite this tradeoff, hyperaged CANAL membranes maintain performance beyond the 200 °C upper bound, having selectivity–permeability performance comparable to many state-of-the-art membranes for H 2 /CO 2 separations. As a result, this study highlights the robustness and industrial viability of ultra-selective CANAL polymers for hydrogen purification, contributing to advancements in clean energy and sustainable separation technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Thermo-mechanical deterioration and molecular degradation of 3D-printed methacrylate-based polymer in various chemical environments

The advancement of additive manufacturing (AM) has accelerated the development of stereolithographic (SLA) photo-curable resins, particularly methacrylate-based polymers, due to the ability to their high-resolution, robust mechanical properties, and suitability. However, their long-term performance in chemical environments remains poorly understood. This study investigates the extent and mechanisms of degradation on an SLA-printed methacrylate-based polymer subjected to various chemicals, including polar and non-polar solvents, as well as strongly acidic aqueous solutions over a 12-week accelerated aging period. A comprehensive analytical approach incorporating swelling kinetics, surface morphology, tensile and dynamic mechanical analysis (DMA), Fourier-transform infrared (FTIR) spectroscopy, and mass spectrometry (MS) was employed to characterize chemical absorption, structural integrity, and leached products. Results reveal that degradation severity is governed by both the polarity and reactivity of the chemical environment. Notably, exposure to 6 mol L -1 HNO₃ induced the most severe deterioration, with over threefold higher swelling compared to other media, and significant reductions in tensile strength, tensile modulus, and glass transition temperature (T g ). In contrast, specimens aged in non-polar solvents (xylene and dodecane) exhibited negligible chemical interaction and retained mechanical performance. FTIR and MS analyses identified acid-catalyzed hydrolysis of ester groups as prominent degradation pathways in acidic media, while diffusion-controlled plasticization prevailed in polar solvents. Furthermore, this study provides valuable insights into the chemical stability of SLA-printed polymers and develops predictive degradation profiles that are crucial for designing durable polymer systems for advanced industrial use.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Functional stimuli-responsive polymers on micro- and nano-patterned interfaces

Micro- and nano-patterned surfaces offer precise control over morphology and chemical composition, enhancing the stability, durability, and functionality of coating materials. When combined with stimuli-responsive polymers, these surfaces gain dynamic adaptability, enabling reversible binding, reusable sensing, and selective molecular capture. Furthermore, while recent review articles have explored various aspects of stimuli-responsive materials, from hydrogel patterns for bioanalytical applications to shape-morphing hydrogels for soft robotics and sensors, a comprehensive review focused on the integration of smart polymers with micro- or nano-patterned interfaces remains absent. This review addresses key surface patterning techniques, including soft lithography, colloidal lithography, and polymer brush photolithography, as well as advances in surface-initiated polymerization methods, such as surface-initiated controlled radical polymerization (SI-CRP). In addition, we discuss recent progress in integrating stimuli-responsive polymers with patterned surfaces to create advanced, functional materials.

Colloidal lithography↗
DOE OSTI2025

Isomerization kinetics of azobenzene crosslinked to a liquid crystal polymer network

Azobenzene is an important chromophore having numerous applications that are a direct implication of its ability to change shape upon irradiation with a suitable wavelength. Here, in this study, photoisomerization kinetics of a diacrylate azobenzene molecule (A3MA) cross-linked to a liquid crystal polymer network (LCN) is investigated. Isomerization experiments were conducted on planar LCN thin films with varying cross-linking densities for a fixed azobenzene concentration. The experiments were conducted at approximately 26 °C, which is significantly below each film’s glass transition temperature. The forward trans-cis and reverse cis-trans isomerization slows down in crosslinked azobenzene liquid crystal polymer networks (ALCNs) as compared to a solution and an uncrosslinked polymer mixture. The observed slowdown is due to the reduction in the free volume and increased steric hindrances with an increase in crosslinking. A single-term first-order kinetics rate equation is known to describe the isomerization kinetics in solutions or uncrosslinked mixtures while the same form fails to represent the reaction kinetics in moderate to highly cross-linked ALCNs. Our results for the first time indicate that a two-term first-order reaction rate is an accurate way to describe the forward trans-cis and reverse thermal cis-trans isomerization in crosslinked azobenzene liquid crystal polymer networks. In addition, the effect of film thickness and incident intensities on the reaction kinetics is investigated. Finally, the two-term isomerization kinetics is incorporated into a finite element photo-chemo-mechanical model to reveal the consequent slowdown in the actuation response of ALCN films. The current findings will be of particular interest to theoreticians and experimentalists alike, for it will help predict and understand accurately the responses of azobenzene-based coatings, and actuators and may have potential applications in underwater soft robotics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

A solvent-targeted recovery and precipitation scheme for the recycling of up to ten polymers from post-industrial mixed plastic waste

Solvent-Targeted Recovery and Precipitation (STRAP TM ) separates polymers within a plastic waste stream by selective dissolution. In this work, the STRAP framework, which combines computational modeling and experiments, was applied to develop a series of steps to separate up to 10 polymers from post-industrial mixed plastic waste (MPW) and the main components recovered were LDPE, HDPE, and PET. The STRAP steps were initially demonstrated with a physical polymer mixture containing LDPE, HDPE, PS, PVC, EVOH, PET, PP, PA6, PA66, and PA66/6, in which recoveries of 89% or higher were achieved for each polymer. Furthermore, this paper demonstrates a solvent selection approach that can be applied to separate unknown plastics materials into purer components.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Partial Solvation of Lithium Ions Enhances Conductivity in a Nanophase-Separated Polymer Electrolyte

In this study, we demonstrate that a multiblock lithium-ion-conducting polymer can be swollen with ethylene carbonate solvent to increase the conductivity relative to the dry polymer material by nearly 4 orders of magnitude. This increase is due to the partial solvation of lithium ions by ethylene carbonate, which leads to Li + diffusion along the solvent–polymer interface. This differs from the vehicular transport mechanism for lithium ions in pure solvent. We use a combination of broadband dielectric spectroscopy, X-ray scattering, and all-atom molecular dynamics simulations to probe the effect of the solvent on the polymer morphology and to elucidate the mechanism of lithium ion transport.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Off-Lattice Markov Chain Monte Carlo Simulations of Mechanically Driven Polymers

Here, we develop off-lattice simulations of semiflexible polymer chains subjected to applied mechanical forces by using Markov Chain Monte Carlo. Our approach models the polymer as a chain of fixed length bonds, with configurations updated through adaptive nonlocal Monte Carlo moves. This proposed method enables precise calculation of a polymer’s response to a wide range of mechanical forces, which traditional on-lattice models cannot achieve. Our approach has shown excellent agreement with theoretical predictions of persistence length and end-to-end distance in quiescent states as well as stretching distances under tension. Moreover, our model eliminates the orientational bias present in on-lattice models, which significantly impacts calculations such as the scattering function, a crucial technique for revealing the polymer conformation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Dynamical Ion Correlations in Polymer and Membrane Electrolytes: Recent Advances and Open Questions

Ion transport in polymer and membrane electrolytes is often described using uncorrelated models like the Nernst–Einstein (NE) approximation, which link conductivity, transference number, and salt diffusivity to individual ion mobilities. However, growing evidence shows that dynamical ion correlations─arising from ion pairing, polymer-mediated coupling, confinement, and electrostatic interactions─can substantially alter macroscopic transport properties. The Onsager transport formalism offers a rigorous framework to quantify these effects via cross-correlated ionic displacements. This Perspective highlights how such correlations manifest across dry and hydrated systems, including salt-doped polymers, block copolymers, hydrogels, and ion-exchange membranes. Here, we examine key physical origins, the influence of salt chemistry and polymer structure, and open questions in measuring and controlling correlated motion. Embracing correlation-aware design enables new pathways to optimize conductivity, transference number, and selectivity─shifting the focus from individual ion mobility to engineered collective dynamics for next-generation electrolytes in energy storage and separations.

Charge transport↗
DOE OSTI2025

Probing Nanorod Assembly and Dynamics in Polymer Nanocomposites in Equilibrium and Shear

Coarse-grained molecular dynamics simulations are used to examine the structure and dynamics of nanorod assemblies in polymer melts under equilibrium and simple shear. We show that as the concentration of nanorods increases, there is a transition from an isotropic phase to a two-phase region in which the nanorods phase separate into a dilute phase and dense bundles of hexagonally packed nanorods. The onset of the two-phase region is below that predicted by Onsager theory, which we attribute to an effective increase in the diameter of nanorods due to a layer of polymer bound to the rod surfaces. Equilibrium simulations show that increasing polymer chain length N enhances nanorod bundling at fixed nanorod concentration. Simulations of systems undergoing simple shear show that flow enhances nanorod alignment and bundling relative to those of equilibrium systems with similar properties. Finally, simulations reveal that increasing nanorod length enhances nanorod alignment under shear at equivalent shear rates but not at equivalent Péclet numbers. Overall, our simulations highlight that polymer matrix-nanorod attraction (i.e., chemistry), shear rate, and matrix chain length are desirable design variables to control the structure of nanorod-containing soft materials under simple shear.

diffusion↗
DOE OSTI2026

Cross-Linker Selection Controls Glass Transition Elevation or Reduction in Dynamic Covalently Bonded Polymer Networks

Introducing cross-links is a powerful approach to improve polymeric material performance relevant to controlling viscoelasticity, thermal and creep resistance, degradability, and efficient membrane separations. The chemically specific glass transition temperature T g is of fundamental importance in determining the time scales of key dynamical processes and physical state of the material in such applications. Here, we study experimentally how the introduction of relatively large cross-linking molecules in slowly exchanging dynamic bond-forming polymers (vitrimers) impacts vitrification for diverse polymer chemistries and a wide range of cross-link fractions. We find T g can increase, decrease, or even remain essentially unchanged, in qualitative contrast to the generic elevation of T g in traditional permanent polymer networks. We formulate an effective terpolymer network model to understand this rich behavior, which emerges as a consequence of a competition between pure cross-linking and generalized plasticization effects. The latter is associated with the tunable cross-linker size and intrinsic dynamic mobility that can offset slowing down due to traditional permanent cross-linking constraints. Here, a new strategy for functional polymer network design is suggested based on adjusting the relative importance of the two competing physical effects, which potentially can significantly enhance energy savings in applications while retaining other intrinsic properties germane to advanced materials performance.

Copolymers↗
DOE OSTI2024

Polymer Layer-Accelerated CO 2 Absorption in Aqueous Amino Acid Solutions

Direct air capture (DAC) of CO 2 via solvent-based absorption is considered a promising negative-emission technology. However, the low concentration of CO 2 in the air and slow transport into the solvent make DAC notoriously challenging to implement without costly investments. In this study, we explore the fundamental role that the bulk and surface properties of CO 2 -permeable polymer membranes play in enhancing the efficiency of the solution sorption process in passive DAC of CO 2 . This work leverages various spectroscopic and computational studies to demonstrate that a hybrid system, comprising a reusable CO 2 -permeable polymer layer placed atop an aqueous amino acid (AA) solution, can outperform a pure aqueous AA system by 2-fold. Here we show how the enhanced solubility of CO 2 in the polymer layer can improve the transport of CO 2 into the aqueous phase, while the chemistry of the polymer can control the interfacial barrier for CO 2 permeation and the interfacial concentration of reactive AAs. The derived knowledge of the material properties achieved here can aid in the design of DAC systems with improved performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Operando Optical Microscopy for Visualization of Dendrite Growth in an Argyrodite LPSCl–Polymer Composite Electrolyte

Herein, we demonstrate the utility of optical microscopy as an accessible technique for the in situ visualization of dendrite growth within polymer–sulfide composite solid-state electrolytes. The composite electrolyte features in situ polymerization and cross-linking of the polymer between ceramic particles, which opens up extensive opportunities for accelerated materials discovery, given the vast array of acrylate/methacrylate monomers available. Specifically, the cross-linked polymer poly(triethylene glycol dimethacrylate) (poly(TEGDMA)) was observed to effectively fill pores and inhibit dendrite growth at the lithium metal interface, attributed to its glassy state at room temperature. This work represents the first application of optical microscopy to illustrate that the incorporation of glassy, undoped polymers such as poly(TEGDMA) can serve as a viable strategy for dendrite suppression in solid-state composite electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Autonomous Synthesis and Inverse Design of Electrochromic Polymers with High Efficiency and Accuracy

Here, the design and synthesis of functional polymers, aimed at targeted properties through specific structures, have long been challenged by their complex and often nonlinear structure–property relationships. Key processes, including knowledge accumulation for predictive design and experimental refinement and validation, are traditionally labor-insensitive and time-consuming, making it difficult to balance accuracy and efficiency. Here, we introduce an accelerated, autonomous system for the on-demand synthesis of electronic polymers that achieves the desired electrochromic functionality with high accuracy and efficiency. Our approach leverages large language model-assisted data mining, a physics-informed copolymer machine learning model, and an AI-driven autonomous robotic workflow in the Polybot lab. Within 72 h, Polybot autonomously synthesized electrochromic polymers (ECPs) with targeted, previously-unreported color values, including green polymers with specific absorption profiles, precisely fine-tuning copolymer structures with a 5% step size in comonomer composition within a three-monomer system. A publicly accessible ECP informatics database has also been created to foster knowledge exchange.

AI-driven Robotic Lab↗