Search NASA⌕ Search

SEARCH · Search NASA

Results for “radiation modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Model calculations of the radiation dose and LET spectra on LDEF and comparisons with flight data

Ionizing radiation environment models, a 3-D spacecraft mass model, and radiation transport codes have been used to predict the radiation dose and linear energy transfer (LET) spectra measured at various locations on the LDEF satellite. The predictions are compared with thermoluminescent dosimeter measurements of the trapped proton and electron doses and with LET spectra measured by plastic nuclear track detectors. The predicted vs observed comparisons indicate some of the uncertainties of present ionizing radiation environment models for low Earth-orbit missions.

LDEF Project↗
NASA NTRSDate not supplied

L2-Charged Particle Environment (L2-CPE)Low Energy Radiation Fluence Model

The L2 Charged Particle Environment (L2-CPE) model provides estimates of number flux and fluence for the low energy electron, proton, and alpha particle populations in the near Earth solar wind and the Earth’s distant magnetosheath and magnetotail. The model is an engineering tool for specifying radiation environments over an energy range from a few eV to a few MeV of importance to surface dose and radiation damage to thin space exposed materials and is intended for use in space system design applications. Mission fluences are obtained by simulating a spacecraft flight trajectory through time-dependent bow shock and magnetopause boundaries with dimensions and orientations driven by solar wind parameters. Monte Carlo sampling of flux environments within individual plasma regimes and/or fluence accumulated along a fight trajectory through multiple regimes is used to determine statistical variations (means and extremes) of the differential number flux and fluence environments for each of the three charged particle species. Model output is differential (in energy) number fluence and flux for the three particle species in units of particles/cm2-keV and particles/cm2-sec-keV, respectively. Users can select the energy range of interest but the current version of the code (L2-CPE Version 1.4.2d) is limited to an energy range of 1 eV to 10 MeV. Flux is integrated over angle to give flux and fluence to surfaces in the ±XGSE, ±YGSE, and/or ±ZGSE directions. Figure 1 shows the opening screen from the L2-CPE graphical user interface (GUI) with options for flux, fluence, plotting model output. The flux scene generate is not currently implemented in the GUI.

Joseph I Minow↗
NASA NTRS1994

Recent space shuttle observations of the South Atlantic anomaly and the radiation belt models

Active ingredients consisting of Tissue Equivalent Proportional Counter (TEPC) and a Proton and Heavy Ion Detector (PHIDE) have been carried on a number of Space Shuttle flights. These instruments have allowed us to map out parts of the South Atlantic Particle Anomaly (SAA) and to compare some of it's features with predictions of the AP-8 energetic proton flux models. We have observed that consistent with the generally observed westward drift of the surface features of the terrestial magnetic field of the SAA has moved west by about 6.9 degrees longitude between the epoch year 1970 of the AP-8 solar maximum model and the Space Shuttle observations made twenty years later. However, calculations indicate that except for relatively brief periods following very large magnetic storms the SAA seems to occupy the same position in L-space as in 1970. After the great storm of 24 March 1991 reconfiguration of the inner radiation belt and/or proton injection into the inner belt, a second energetic proton belt was observed to form at approximately equal to 2. As confirmed by a subsequent flight observations, this belt was shown to persist at least for six months. Our measurements also indicate an upward shift in the L location of the primary belt from L = 1.4 to L = 1.5. In addition we confirm through direct real time observations the existence and the approximate magnitude of the East-West effect. If the need exists for improved and updated radiation belt models in the Space Station era, these observations point out the specific features that should be considered and incorporated when this task is undertaken.

Konradi, A.↗
NASA NTRSDate not supplied

FORWARD AND INVERSE L-BAND RADIATIVE TRANSFER MODELING OVER THE DRY CHACO, USING SMOS OBSERVATIONS, LAND SURFACE MODELING AND IN SITU DATA

Passive microwave L-band remote sensing is well known for its sensitivity to surface soil moisture over land.The signal is also affected by other dynamic variables such as vegetation and soil salinity. In this research, L-band microwave observations of the Soil Moisture Ocean Salinity (SMOS) mission are used to explore soil surface salinity, moisture and vegetation, in the Argentinean Dry Chaco, an area with possible emerging dryland salinity. A Radiative Transfer Model (RTM) with inclusion of a correction to the soil’s dielectric constant for salinity was used in forward and inverse mode, using either in situ data or Catchment Land Surface Model (CLSM) simulations as RTM input. The forward analysis pointed out shortcomings in the modeled soil moisture and soil surface temperature estimates. The impact of salinity on forward simulations over the Dry Chaco was limited.The RTM inversion using 10 years of SMOS brightness temperature observations resulted in realistic estimates of vegetation and roughness, both with and withouto ptimizing a correction term for the dielectric constant in terms of salinity equivalents. However,the retrieval of the correction term to the dielectric constant was very uncertain and not representative of soil surface salinity, but rather of open water, texture uncertainty or soil moisture bias.

L-band↗
NASA NTRS1979

Modeling of Radiative Heating in Base Region of Jovian Entry Probe

A theoretical model is derived to determine the average thermodynamic properties in the expanding region, recirculating region, recompression region, and neck region through application of one-dimensional conservation equations. Radiative transfer is calculated using spectrally detailed computer codes accounting for nonequilibrium. The results show that the most severe heating occurs immediately behind the frustum, and that the recompression and neck regions are the major sources of radiation that heats the base stagnation point, The radiation flux to the base point is slightly stronger with ablation than without. Its value is 0.11(43 P(sub b)/P(sub s))(sup 2) times that to the front stagnation point where the base pressure P(sub b) is defined as the average pressure in the recirculating region and P(sub s) is the front stagnation-point pressure. The time-integrated heat load to the base point is 18(43 P(sub b)/P(sub s))(sup 2) kJ/sq cm.

Park, Chul↗
NASA NTRSDate not supplied

Dependence of Lightning Cloud-Top Optical Emissions on Channel Characteristics Using Boltzmann Radiative Transfer Modeling

With an estimated global flash rate of 46 lightning per second, a significant amount of lightning nitrogen oxides (LNOx) are produced within the climate system. In turn, LNOx affect the concentrations of ozone (O 3 , an important greenhouse gas) as well as the very reactive hydroxyl radicals (OH, that affect all greenhouse gases). Thus, space-based estimation of LNOx is highly sought [Koshak 2017; Koshak et al. (2015)]. Total lightning channel length, L , is a proxy for the total flash energy (and hence LNOx production). Geostationary lightning mappers provide cloud-top 2D views of the diffuse (i.e., blurry) optical images of lightning, thereby making it difficult to determine L (and other channel features). Transient Boltzmann radiative transfer modeling is applied here to investigate the dependence of the spatio-temporal pattern of cloud-top lightning optical emissions on L and other channel characteristics (e.g., orientation, propagation direction, amplitude, location, ...).

William J Koshak↗
NASA NTRS1994

Effective UV radiation from model calculations and measurements

Model calculations have been made to simulate the effect of atmospheric ozone and geographical as well as meteorological parameters on solar UV radiation reaching the ground. Total ozone values as measured by Dobson spectrophotometer and Brewer spectrometer as well as turbidity were used as input to the model calculation. The performance of the model was tested by spectroradiometric measurements of solar global UV radiation at Potsdam. There are small differences that can be explained by the uncertainty of the measurements, by the uncertainty of input data to the model and by the uncertainty of the radiative transfer algorithms of the model itself. Some effects of solar radiation to the biosphere and to air chemistry are discussed. Model calculations and spectroradiometric measurements can be used to study variations of the effective radiation in space in space time. The comparability of action spectra and their uncertainties are also addressed.

Feister, Uwe↗
NASA NTRSDate not supplied

Radiation Transport Models in Space: from Supernovae to Cells

Humans embarking on deep space exploration missions will encounter persistent exposure to galactic cosmic rays (GCR) - an energetic and highly complex radiation field that is unlike anything found on Earth. Exposure to such radiation fields is attributed to various adverse health effects, including cancer, cardiovascular disease, and cognitive impairment and is identified by NASA as one of the five main hazards of human spaceflight. It is therefore critical to be able to fully characterize the exposure received by humans behind shielding in space and project consequent health risks. A wide variety of computational models have been developed over the years to help meet this requirement. In this talk, an overview of the GCR environment in deep space is provided. Methods of propagating GCR fields through the shielding that protects humans in space are described along with simulation tools used to assess biological damage at the cellular scale. Finally, the NASA cancer risk model is briefly described, and risk projections are provided for various mission scenarios. Radiation transport models and solution methods pervade many aspects of this talk. For example, the GCR spectrum impinging on spacecraft is determined by solving the Fokker-Planck transport equation to propagate cosmic rays (believed to originate from supernovae) from the edge of the heliosphere to the vicinity of Earth. The Boltzmann transport equation is solved to transport this GCR spectrum through shielding and human tissue. Monte Carlo methods are used to simulate the transport of low energy electrons that dominate biological damage at the cellular scale. Progress and challenges in each of these areas will be highlighted.

Tony C. Slaba↗
NASA NTRS2015

NASA Galactic Cosmic Radiation Environment Model: Badhwar-O'Neill (2014)

The Badhwar‐O'Neill (BON) Galactic Cosmic Ray (GCR) flux model is used by NASA to certify microelectronic systems and in the analysis of radiation health risks for human space flight missions. Of special interest to NASA is the kinetic energy region below 4.0 GeV/n due to the fact that exposure from GCR behind shielding (e.g., inside a space vehicle) is heavily influenced by the GCR particles from this energy domain. The BON model numerically solves the Fokker‐Planck differential equation to account for particle transport in the heliosphere due to diffusion, convection, and adiabatic deceleration under the assumption of a spherically symmetric heliosphere. The model utilizes a GCR measurements database from various particle detectors to determine the boundary conditions. By using an updated GCR database and improved model fit parameters, the new BON model (BON14) is significantly improved over the previous BON models for describing the GCR radiation environment of interest to human space flight.

O'Neill, P. M.↗
NASA NTRS1972

Post-workshop models of Jupiter's radiation belts

Models for the charged particle populations of Jupiter's trapped radiation belts were derived at the Jupiter Radiation Belt Workshop on the basis of several assumptions which represented a consensus of opinion. It was possible to improve the models on the basis of work performed after the workshop concluded. These improvements affect the models in two ways. The effects of special relativity on the particle energy and flux dependences in the magnetosphere were included in a derivation based on L-shell diffusion with conservation of the magnetic moment. Quantitative conclusions are available for the limit which ion cyclotron instability places on the proton population. A set of models which incorporates these developments in a way consistent with the original workshop assumptions and conclusions is described.

Divine, N.↗
NASA NTRS2004

Precipitation and Latent Heating Distributions from Satellite Passive Microwave Radiometry: Method and Uncertainties - Part 1

A revised Bayesian algorithm for estimating surface rain rate, convective rain proportion, and latent heating/drying profiles from satellite-borne passive microwave radiometer observations over ocean backgrounds is described. The algorithm searches a large database of cloud-radiative model simulations to find cloud profiles that are radiatively consistent with a given set of microwave radiance measurements. The properties of these radiatively consistent profiles are then composited to obtain best estimates of the observed properties. The revised algorithm is supported by an expanded and more physically consistent database of cloud-radiative model simulations. The algorithm also features a better quantification of the convective and non-convective contributions to total rainfall, a new geographic database, and an improved representation of background radiances in rain-free regions. Bias and random error estimates are derived from applications of the algorithm to synthetic radiance data, based upon a subset of cloud resolving model simulations, and from the Bayesian formulation itself. Synthetic rain rate and latent heating estimates exhibit a trend of high (low) bias for low (high) retrieved values. The Bayesian estimates of random error are propagated to represent errors at coarser time and space resolutions, based upon applications of the algorithm to TRMM Microwave Imager (TMI) data. Errors in instantaneous rain rate estimates at 0.5 deg resolution range from approximately 50% at 1 mm/h to 20% at 14 mm/h. These errors represent about 70-90% of the mean random deviation between collocated passive microwave and spaceborne radar rain rate estimates. The cumulative algorithm error in TMI estimates at monthly, 2.5 deg resolution is relatively small (less than 6% at 5 mm/day) compared to the random error due to infrequent satellite temporal sampling (8-35% at the same rain rate).

Olson, William S.↗
NASA NTRS2006

Precipitation and Latent Heating Distributions from Satellite Passive Microwave Radiometry: Improved Method and Uncertainties - Part 1

A revised Bayesian algorithm for estimating surface rain rate, convective rain proportion, and latent heating profiles from satellite-borne passive microwave radiometer observations over ocean backgrounds is described. The algorithm searches a large database of cloud-radiative model simulations to find cloud profiles that are radiatively consistent with a given set of microwave radiance measurements. The properties of these radiatively consistent profiles are then composited to obtain best estimates of the observed properties. The revised algorithm is supported by an expanded and more physically consistent database of cloud-radiative model simulations. The algorithm also features a better quantification of the convective and nonconvective contributions to total rainfall, a new geographic database, and an improved representation of background radiances in rain-free regions. Bias and random error estimates are derived from applications of the algorithm to synthetic radiance data, based upon a subset of cloud-resolving model simulations, and from the Bayesian formulation itself. Synthetic rain-rate and latent heating estimates exhibit a trend of high (low) bias for low (high) retrieved values. The Bayesian estimates of random error are propagated to represent errors at coarser time and space resolutions, based upon applications of the algorithm to TRMM Microwave Imager (TMI) data. Errors in TMI instantaneous rain-rate estimates at 0.5 -resolution range from approximately 50% at 1 mm/h to 20% at 14 mm/h. Errors in collocated spaceborne radar rain-rate estimates are roughly 50%-80% of the TMI errors at this resolution. The estimated algorithm random error in TMI rain rates at monthly, 2.5deg resolution is relatively small (less than 6% at 5 mm day.1) in comparison with the random error resulting from infrequent satellite temporal sampling (8%-35% at the same rain rate). Percentage errors resulting from sampling decrease with increasing rain rate, and sampling errors in latent heating rates follow the same trend. Averaging over 3 months reduces sampling errors in rain rates to 6%-15% at 5 mm day.1, with proportionate reductions in latent heating sampling errors.

Olson, William S.↗
NASA NTRS2015

NASA Galactic Cosmic Radiation Environment Model: Badhwar - O'Neill (2014)

The Badhwar-O'Neill (BON) Galactic Cosmic Ray (GCR) flux model has been used by NASA to certify microelectronic systems and in the analysis of radiation health risks for human space flight missions. Of special interest to NASA is the kinetic energy region below 4.0 GeV/n due to the fact that exposure from GCR behind shielding (e.g., inside a space vehicle) is heavily influenced by the GCR particles from this energy domain. The BON model numerically solves the Fokker-Planck differential equation to account for particle transport in the heliosphere due to diffusion, convection, and adiabatic deceleration under the assumption of a spherically symmetric heliosphere. The model utilizes a comprehensive database of GCR measurements from various particle detectors to determine boundary conditions. By using an updated GCR database and improved model fit parameters, the new BON model (BON14) is significantly improved over the previous BON models for describing the GCR radiation environment of interest to human space flight.

Golge, S.↗
NASA NTRS1971

Simultaneous measurements of the hydrogen airglow emissions of Lyman alpha, Lyman beta, and Balmer alpha.

Comparison of Lyman-alpha, 740- to 1050-A, and Balmer-alpha airglow measurements made at 134 deg solar-zenith angle on Oct. 13, 1969, with resonance-scattering models of solar radiation. Model comparison with Lyman-alpha data fixes the hydrogen column abundance over 215 km to 2 x 10 to the 13th per cu cm within a factor of 2. Differences between the Lyman-alpha model and data indicate a polar-equatorial departure from spherical symmetry in the hydrogen distribution. A Lyman-beta model based on the hydrogen distribution found to fit the Lyman-alpha data fits the spatial variation of the 740- to 1050-A data well from 100 to 130 km, but it does not fit the data well at higher altitudes; thus the presence of more rapidly absorbed shorter-wavelength radiation is indicated. This same resonance-scattering model yields Balmer-alpha intensities that result in good spatial agreement with the Balmer-alpha measurements, but a fivefold increase in the measured solar line center Lyman-beta flux is required (as required for the Lyman-beta measurement). The intensity ratio of Lyman-beta and Balmer-alpha at night is found to be a simple measure of the hydrogen optical depth if measurements with good accuracy can be made in the visible and ultraviolet spectrum.

Weller, C. S.↗
NASA NTRS2017

Active and Passive Radiative Transfer Modeling with Preferentially-Aligned Particles

The fluid dynamics of falling hydrometeors often results in preferential orientations that can affect both the intensity and polarization of electromagnetic radiation. In order to properly interpret remote sensing observations of ice and snow, such alignments should be considered when constructing databases of scattering particles; however, the inclusion of aligned particles increases the complexity of the scattering data. To demonstrate the use of scattering properties of preferentially-aligned particles, millimeter-wave brightness temperatures and radar observables, including reflectivity and linear depolarization ratio, are modeled using the Atmospheric Radiative Transfer Simulator (ARTS). The necessary scattering parameters for vector radiative transfer, particularly with respect to ARTS, are reviewed, and the exploitation of particle symmetries, as well as scattering reciprocity relationships, are detailed.

radiative transfer↗
NASA NTRS1997

Finite Difference Radiative Transfer Model Calculations Compared to Measurements at the Top and Bottom of the Atmosphere

A finite difference radiative transfer program was developed to handle most anisotropic scattering and reflectance problems encountered in the Earth's atmospheric system. The model has been used to reproduce the radiance received by both satellite and ground based radiation measuring instruments. It accurately replicates the radiance measured by both narrow and wide field-of-view instruments with either narrow or broadband wavelength ranges located on the surface and at satellite altitudes. The output of the finite difference code is compared to the measurements by surface pyranometers and a spectroradiometer aboard a high flying aircraft. The program output is also compared to ERBE measurements aboard the ERBS and NOAA-9 satellites as well as the visible bands aboard the GOES-6 and GOES-7 satellites and AVHRR bands 1 and 2 of the NOAA-9 and NOAA-1 1 satellites. The model is within 0.2 % of the radiance received by pyranometers, within 0.6 % of the ERBE radiances, and within 3 % of the radiances measured by the visible bands of the GOES and NOAA AVHRR radiometers.

LeCroy, Stuart R.↗
NASA NTRS2005

Thermal Analysis Methods for Aerobraking Heating

As NASA begins exploration of other planets, a method of non-propulsively slowing vehicles at the planet, aerobraking, may become a valuable technique for managing vehicle design mass and propellant. An example of this is Mars Reconnaissance Orbiter (MRO), which will launch in late 2005 and reach Mars in March of 2006. In order to save propellant, MRO will use aerobraking to modify the initial orbit at Mars. The spacecraft will dip into the atmosphere briefly on each orbit, and during the drag pass, the atmospheric drag on the spacecraft will slow it, thus lowering the orbit apoapsis. The largest area on the spacecraft, and that most affected by the heat generated during the aerobraking process, is the solar arrays. A thermal analysis of the solar arrays was conducted at NASA Langley, to simulate their performance throughout the entire roughly 6-month period of aerobraking. Several interesting methods were used to make this analysis more rapid and robust. Two separate models were built for this analysis, one in Thermal Desktop for radiation and orbital heating analysis, and one in MSC.Patran for thermal analysis. The results from the radiation model were mapped in an automated fashion to the Patran thermal model that was used to analyze the thermal behavior during the drag pass. A high degree of automation in file manipulation as well as other methods for reducing run time were employed, since toward the end of the aerobraking period the orbit period is short, and in order to support flight operations the runs must be computed rapidly. All heating within the Patran Thermal model was combined in one section of logic, such that data mapped from the radiation model and aeroheating model, as well as skin temperature effects on the aeroheating and surface radiation, could be incorporated easily. This approach calculates the aeroheating at any given node, based on its position and temperature as well as the density and velocity at that trajectory point. Run times on several different processors, computer hard drives, and operating systems (Windows versus Linux) were evaluated.

Amundsen, Ruth M.↗