Search NASA⌕ Search

SEARCH · Search NASA

Results for “self”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Management and control of self-replicating systems: A systems model

In 1980, a conceptual engineering approach to self-replicating systems was achieved. The design was based on von Newmann's kinematic version of self-replicating automata. The systems management and control and the organization of the control elements are reported. After developing the functional requirements of such a system, a hierarchy of three management and control levels is described. These are an autonomous, an external, and an intelligent management and control system. Systems recycling, systems specialization, and information replication are discussed.

Vontiesenhausen, G.↗
NASA NTRS1981

Visually induced self-motion sensation adapts rapidly to left-right reversal of vision

Three experiments were conducted using 15 adult volunteers with no overt oculomotor or vestibular disorders. In all experiments, left-right vision reversal was achieved using prism goggles, which permitted a binocular field of vision subtending approximately 45 deg horizontally and 28 deg vertically. In all experiments, circularvection (CV) was tested before and immediately after a period of exposure to reversed vision. After one to three hours of active movement while wearing vision-reversing goggles, 10 of 15 (stationary) human subjects viewing a moving stripe display experienced a self-rotation illusion in the same direction as seen stripe motion, rather than in the opposite (normal) direction, demonstrating that the central neural pathways that process visual self-rotation cues can undergo rapid adaptive modification.

Oman, C. M.↗
NASA NTRS1982

The self-excited axisymmetric jet

The results of a number of investigations suggest that large-scale coherent structures and their interactions play key roles in the transport of heat, mass, and momentum, and in the generation of aerodynamic noise. Investigations related to the study of a large-scale coherent structure in the circular jet are considered, taking into account the advantages of inducing controlled perturbation through self-sustained excitation with the whistler nozzle. The primary objective of the present study was to document the jet response to self-excitation and the sensitivity of this response to the initial condition and the Reynolds number R(D). It was also felt that the results would find use in the control of mixing and aerodynamic noise in a jet.

Hasan, M. A. Z.↗
NASA NTRS1982

Self-tuning regulator design for adaptive control of aircraft wing/store flutter

The application of the self-tuning regulator concept to adaptively control aircraft wing/store flutter instability is described. A simple design based on a reduced-order aircraft model has been successfully tested on a high-order simulation of an advanced aircraft, and performance was found to be comparable to another design using on-line maximum likelihood identification of plant parameters. The main advantage of the self-tuning regulator is its simplicity, while the main disadvantage is the inadequacy of prior performance guarantees.

Johnson, T. L.↗
NASA NTRS1983

On the theory of self-focusing of powerful wave beams in nonhomogeneous media

The stationary self-focusing of the Gauss wave beam is considered in a nonhomogeneous medium in the case of local nonlinearity. Equations of the aberrationless approximation for the beam width, the field on the beam axis and the refraction factor are integrated on a computer. Self-focusing in dependence of the nonlinearity level and initial divergence, the dissipation, the length of nonhomogeneity of the dielectric permittivity nondisturbed by a beam, and the diffraction parameter are investigated.

Yerokhin, N. S.↗
NASA NTRS1983

High speed cryogenic self-acting, shaft seals for liquid rocket turbopumps

Three self acting lift pad liquid oxygen face seals and two self acting gaseous helium circumferential seals for high speed liquid oxygen turbopump were evaluated. The development of a technology for reliable, 10 hour life, multiple start seals for use in high speed liquid oxygen turbopumps is discussed.

Burcham, R. E.↗
NASA NTRS1983

Molecular self-shielding in the outflows from late-type stars

It is proposed that molecules, especially CO and H2, in the circumstellar outflows from late-type stars can be self-shielded from ambient interstellar UV radiation. The theory of self-shielding in spherical, expanding envelopes is developed for the case in which the photodestruction is dominated by absorption in the Doppler cores of the relevant UV lines, and it is shown that this theory can account for the observations of IRC plus 10216. Also considered is the case in which photodestruction takes place in the damping wings of the UV lines as is appropriate for H2. It is found that most of the hydrogen remains molecular, although the amount of atomic hydrogen is not completely negligible.

Morris, M.↗
NASA NTRS1983

Population Control of Self-Replicating Systems: Option C

From the conception and development of the theory of self-replicating automata by John von Neumann, others have expanded on his theories. In 1980, Georg von Tiesenhausen and Wesley A. Darbro developed a report which is a "first' in presenting the theories in a conceptualized engineering setting. In that report several options involving self-replicating systems are presented. One of the options allows each primary to generate n replicas, one in each sequential time frame after its own generation. Each replica is limited to a maximum of m ancestors. This study involves determining the state vector of the replicas in an efficient manner. The problem is cast in matrix notation, where F = fij is a non-diagonalizable matrix. Any element fij represents the number of elements of type j = (c,d) in time frame k+1 generated from type i = (a,b) in time frame k. It is then shown that the state vector is: bar F(k)=bar F (non-zero) X F sub K = bar F (non-zero) xmx J sub kx m sub-1 where J is a matrix in Jordan form having the same eigenvalues as F. M is a matrix composed of the eigenvectors and the generalized eigenvectors of F.

Mccord, R. L.↗
NASA NTRS1984

The status of analytical preparation for 2-dimensional testing at high transonic speeds in the University of Southampton transonic self-streamlining wind tunnel

Validation data from the Transonic Self-Streamlining Wind Tunnel has proved the feasibility of streamlining two dimensional flexible walls at low speeds and up to transonic speeds, the upper limit being the speed where the flexible walls are just supercritical. At this condition, breakdown of the wall setting strategy is evident in that convergence is neither as rapid nor as stable as for lower speeds, and wall streamlining criteria are not always completely satisfied. The only major step necessary to permit the extension of two dimensional testing into higher transonic speeds is the provision of a rapid algorithm to solve for mixed flow in the imagery flow fields. The status of two dimensional high transonic testing in the Transonic Self-Streamlining Wind Tunnel is outlined and, in particular, the progress of adapting an algorithm, which solves the Transonic Small Perturbation Equation, for predicting the imagery flow fields is detailed.

Lewis, M. C.↗
NASA NTRS1984

The design and operational development of self-streamlining 2-dimensional flexible walled test sections

Self streamlining two dimensional flexible walled test sections eliminate the uncertainties found in data from conventional test sections particularly at transonic speeds. The test section sidewalls are rigid, while the floor and ceiling are flexible and are positioned to streamline shapes by a system of jacks, without reference to the model. The walls are therefore self streamlining. Data are taken from the model when the walls are good streamlines such that the inevitable residual wall induced interference is acceptably small and correctable. Successful two dimensional validation testing at low speeds has led to the development of a new transonic flexible walled test section. Tunnel setting times are minimized by the development of a rapid wall setting strategy coupled with on line computer control of wall shapes using motorized jacks. Two dimensional validation testing using symmetric and cambered aerofoils in the Mach number range up to about 0.85 where the walls are just supercritical, shows good agreement with reference data using small height-chord ratios between 1.5 and unity.

Wolf, S. W. D.↗
NASA NTRS1983

Self-separation in terminal areas using CDTI

The Langley Research Center is participating in a joint NASA/FAA program designed to explore the potential benefits and liabilities of Cockpit Display of Traffic Information (CDTI) for a broad range of applications. As a part of this effort, part-task piloted simulations have been conducted to determine the effect of various display parameters and separation criteria on terminal area in-trail following using CDTI. Current experiments are evaluating cockpit procedures and crew workload aspects of self-separation tasks in a simulated full-system terminal area environment. This paper will summarize the results of the part-task terminal area experiments and discuss the current full-system simulation experiments involving active self-separation tasks.

Williams, D. H.↗
NASA NTRS1984

Experimental observations of self-similar plasma expansion

The present investigation is concerned with measurements of the plasma potential profile of an expanding plasma, taking into account the demonstration of the self-similar behavior of such a plasma. The obtained experimental results are consistent with self-similar solutions reported by Crow et al. (1975). It is found that the quasi-neutrality condition breaks down early during the experiment. A consideration of the effect of charge separation is, therefore, required. Attention is given to the evolution of the potential profiles of the expanding plasma as a function of time, the accelerated ion fronts, and the sheath formation of the expanding plasma into a floating boundary.

Chan, C.↗
NASA NTRS1984

Self-shadowing effects on the thermal-structural response of orbiting trusses

An investigation of self-shadowing effects on the thermal-structural response of orbiting trusses is described. The shadowing, heating, thermal and structural analyses are summarized. The significance of shadowing on the thermal-structural behavior of a single member and a beam constructed from truss members is described. For the trusses considered, the study shows that member self-shadowing effects significantly alter the behavior and must be included to predict the thermal-structural response correctly.

Thornton, E. A.↗
NASA NTRS1986

Interface Circuits for Self-Checking Microprocessors

Fault-tolerant-microcomputer concept based on enhancing "simple" computer with redundancy and self-checking logic circuits detect hardware faults. Interface and checking logic and redundant processors confer on 16-bit microcomputer ability to check itself for hardware faults. Checking circuitry also checks itself. Concept of self-checking complementary pairs (SCCP's) employed throughout ICL unit.

Rennels, D. A.↗
NASA NTRS1984

The Use of Self-scanned Silicon Photodiode Arrays for Astronomical Spectrophotometry

The use of a Reticon self scanned silicon photodiode array for precision spectrophotometry is discussed. It is shown that internal errors are + or - 0.003 mag. Observations obtained with a photodiode array are compared with observations obtained with other types of detectors with agreement, from 3500 A to 10500 A, of 1%. The photometric properties of self scanned photodiode arrays are discussed. Potential pitfalls are given.

Cochran, A. L.↗
NASA NTRS1985

Scaling of airfoil self-noise using measured flow parameters

Data from an airfoil broadband self-noise study are reported. Attention here is restricted to two-dimensional models at zero angle of attack to the flow. The models include seven NACA 0012 airfoil sections and five flat plate sections with chordlengths ranging from 2.54 to 60.96 cm. Testing parameters include flow velocity to 71.3 m/s and boundary-layer turbulence through natural transition and by tripping. Detailed aerodynamic measurements are conducted in the near-wake of the sharp trailing edges. The noise spectra of the self-noise sources are determined by the use of a cross-spectral technique. The acoustic data are normalized using the measured aerodynamic parameters in order to evaluate a commonly used scaling law. An examination of the Reynolds number dependence of the normalized overall levels has revealed a useful scaling result. This result appears to quantify the transition between turbulent boundary-layer trailing-edge noise and laminar boundary-layer vortex shedding noise.

Brooks, T. F.↗
NASA NTRS1985

Pantographing self adaptive gap elements

This paper develops a so-called pantographing self adaptive gap element type contact strategy. Due to the manner of formulation, the scheme has the capability to handle large deformations in the contact zone; contact initiation in structure exhibiting either positive or indefinite stiffness characteristics; kinematic and material nonlinearity as well as; self adaptively adjusts load/time stepping. In this context, contact in pre and postbuckling structure can be treated. To illustrate the scheme, several benchmark problems are presented. These include contacting structure involving large deformation kinematics, inelastic behavior as well as pre and postbuckling stiffness characteristics.

Padovan, J.↗
NASA NTRS1985

Self-locking telescoping manipulator arm

A telescoping manipulator arm and pivotable finger assembly are disclosed. The telescoping arm assembly includes a generally T-shaped arm having three outwardly extending fingers guided on grooved roller guides to compensate for environmental variations. The pivotable finger assembly includes four pivoting fingers. Arcuate teeth are formed on the ends of the fingers. A rack having teeth on four sides meshes with each one of the fingers. One surface of the rack includes teeth along its entire surface which mesh with teeth of one of the fingers. The teeth at the remote end of the rack engage teeth of a gear wheel. The wheel includes a worm which meshes with a worn drive shaft of the drive motor providing a ninety degree self-locking drive for locking the fingers in a desired position. A similar drive provides a self-locking drive for positioning the telescoping arm.

Nesmith, M. F.↗