Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Functional Surface Coating to Enhance the Stability of LiNi 0.6 Mn 0.2 Co 0.2 O 2

Parasitic reactions are responsible for continuous performance loss during the normal operation and storage of lithium-ion batteries, particularly for those using nickel-rich cathode materials. Among many contributors, residual Li 2 CO 3 on the surface of nickel-rich cathodes plays a detrimental role in promoting parasitic reactions, and hence accelerates the performance loss of those cathode materials. In this work, a wet impregnation process was utilized to convert the detrimental Li 2 CO 3 and LiOH impurities into a beneficial functional surface coating comprising phosphates. Specifically, hydro-phosphates were used as the functional surface modification agents to mitigate the detrimental effect of surface residuals. The best electrochemical performance was achieved by modifying LiNi 0.6 Mn 0.2 Co 0.2 O 2 with a diluted dihydro-phosphate solution (pKa = 7.2), while the metal cation had a negligible impact on the electrochemical performance. This work provides a cheap and simple method for enabling the high performance of nickel-rich cathodes.

25 ENERGY STORAGE↗
DOE OSTI2020

Non-compact oxide-island growth induced by surface phase transition of the intermetallic NiAl during vacuum annealing

Crystal structure and composition are inter-dependent and decoupling their effects on surface reactivity is challenging. Using low-energy electron microscopy to spatially and temporally resolve the oxide film growth during the oxidation of NiAl(100), we differentiate such coupled effects by monitoring oxide growth while simultaneously fine-tuning the surface structure and composition during oxidation. We demonstrate that the oxidation of chemically ordered surfaces results in compact oxide island growth whereas non-compact oxide growth during the surface phase transition. By incorporating the surface phase transition induced chemical disordering into kinetic Monte Carlo simulations, we illustrate that the non-compact oxide growth is induced by the composition effect on the surface diffusion of oxygen, which can be described by the concept of “ant in the labyrinth”.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Epitaxial Thin Film Growth on Recycled SrTiO 3 Substrates Toward Sustainable Processing of Complex Oxides

Complex oxide thin films cover a range of physical properties and multifunctionalities that are critical for logic, memory, and optical devices. Typically, the high‐quality epitaxial growth of these complex oxide thin films requires single crystalline oxide substrates such as SrTiO 3 (STO), MgO, LaAlO 3 , a‐Al 2 O 3, and many others. Recent successes in transferring these complex oxides as free‐standing films not only offer great opportunities in integrating complex oxides on other devices, but also present enormous opportunities in recycling the deposited substrates after transfer for cost‐effective and sustainable processing of complex oxide thin films. In this work, the surface modification effects introduced on the recycled STO are investigated, and their impacts on the microstructure and properties of subsequently grown epitaxial oxide thin films are assessed and compared with those grown on the pristine substrates. Detailed analyses using high‐resolution scanning transmission electron microscopy and geometric phase analysis demonstrate distinct strain states on the surfaces of the recycled STO versus the pristine substrates, suggesting a pre‐strain state in the recycled STO substrates due to the previous deposition layer. These findings offer opportunities in growing highly mismatched oxide films on the recycled STO substrates with enhanced physical properties. Specifically, yttrium iron garnet (Y 3 Fe 5 O 12 ) films grown on recycled STO present different ferromagnetic responses compared to that on the pristine substrates, underscoring the effects of surface modification. The study demonstrates the feasibility of reuse and redeposition using recycled substrates. Via careful handling and preparation, high‐quality epitaxial thin films can be grown on recycled substrates with comparable or even better structural and physical properties toward sustainable process of complex oxide devices.

pre-strained STO surfaces↗
DOE OSTI2024

On the effect of flux-surface shaping on trapped-electron modes in quasi-helically symmetric stellarators

Using a novel optimization procedure, it has been shown that the Helically Symmetric eXperiment stellarator can be optimized for reduced trapped-electron-mode (TEM) instability [Gerard et al., Nucl. Fusion 63, (2023) 056004]. Presently, with a set of 563 experimental candidate configurations, gyrokinetic simulations are performed to investigate the efficacy of available energy EA, quasi-helical symmetry, and flux-surface shaping parameters as metrics for TEM stabilization. It is found that lower values of EA correlate with reduced growth rates, but only when separate flux-surface shaping regimes are considered. Moreover, configurations with improved quasi-helical symmetry demonstrate a similar reduction in growth rates and less scatter compared to EA. Regarding flux-surface shaping, a set of helical shaping parameters is introduced that show increased elongation is strongly correlated with reduced TEM growth rates, however, only when the quasi-helical symmetry is preserved. Using a newly derived velocity-space-averaged TEM resonance operator, these trends are analyzed to provide insights into the physical mechanism of the observed stabilization. For elongation, stabilization is attributed to geometric effects that reduce the destabilizing particle drifts across the magnetic field. Regarding quasi-helical symmetry, the TEM resonance in the maximally resonant trapping well is shown to increase as the quasi-helical symmetry is broken, and breaking quasi-helical symmetry increases the prevalence of highly resonant trapping wells. While these results demonstrate the limitations of using any single metric as a linear TEM proxy, it is shown that quasi-helical symmetry and plasma elongation are highly effective metrics for reducing TEM growth rates in helical equilibria.

Physics↗
DOE OSTI2024

Insights into the laser-assisted photoelectric effect from solid-state surfaces

Photoemission from a solid surface provides a wealth of information about its electronic structure and dynamic evolution. Ultrafast pump-probe experiments offer real-time access to photon-surface interactions and the resulting electron dynamics. Here, we present a femtosecond time-resolved photoelectron spectroscopy study of laser-assisted photoemission (LAPE) from two different metal surfaces, tungsten and platinum. Utilizing synchronized IR laser and x-ray pulses, photoelectron sideband generation up to the sixth order is observed. A significant material-dependent variation of the LAPE response has not been predicted by previous theoretical models, to the best of our knowledge. The observed phenomena are semiquantitatively reproduced by considering distinct dynamic dielectric responses of the two materials. In conclusion, these findings provide a deeper understanding of the LAPE process and insights into the dynamic interplay between optical laser fields and metal surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Altering Linear Scaling Relationships on Metal Catalysts via Ligand–Adsorbate Hydrogen Bonding

Linear scaling relationships for adsorption energies of related molecules provide a simple tool for the prediction of catalytic properties and also reveal inherent constraints in heterogeneous catalyst design. In an effort to predict materials that preferentially stabilize intermediates capable of forming hydrogen bonds (H-bonds) and thus reduce these constraints, scaling relations for thiolate-coated fcc (111) surfaces were developed. Here, we demonstrate how ligand–adsorbate H-bonds lead to the stabilization of certain adsorbates and how this affects the linear scaling of adsorption energies for similarly bound intermediates. For H-bonds that occur remote from the surface, ligand–adsorbate H-bond strength is independent of metal composition and instead depends only on the acidities of the H-bond-forming functional groups. As the distance of H-bond-accepting groups from the surface decreases and interactions with the metal strengthen, the effect of surface composition on H-bond strength increases while additional factors, such as conformational changes and steric hinderance, can offset the stabilizing effect of the ligands. In this work, these competing factors may influence both the slope and y-intercept of adsorption strength scaling. These findings aid the rational design of enhanced catalytic materials by enabling the screening of ligand- or spectator-modified materials that do not conform to the linear scaling relations of bare metal surfaces.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Interpreting the Operando XANES of Surface-Supported Subnanometer Clusters: When Fluxionality, Oxidation State, and Size Effect Fight.

X-ray absorption near edge structure (XANES) spectroscopy is widely used for operando catalyst characterization. We show that, for highly fluxional supported nanoclusters, the customary extraction of the oxidation state of the metal from the XANES data by fitting to the bulk standards is highly questionable. The XANES signatures as well as the apparent oxidation state for such clusters arise from a complex combination of many factors, and not only from the chemical composition in reaction conditions (e.g., oxygen content in oxidizing atmosphere). The thermally accessible isomerization and population of several structurally distinct cluster forms, cluster-support interaction, and intrinsic size effects all impact the metal oxidation state and XANES signal. We demonstrate this on copper oxide clusters with different compositions, Cu4Ox(x = 2-5) and Cu5Oy (y = 3, 5), deposited on amorphous alumina and ultrananocrystalline diamond, for which we computed the XANES spectra and compare the results to the experiment. We show in addition that fitting the experimental spectrum to calculated spectra of supported clusters can, in contrast, provide good agreement and insight into the spectrum-composition-structure relation. Experimental XANES interpreted using the proposed fitting scheme shows the partial reduction of Cu oxide clusters at rising temperatures, and pinpoints the specific stoichiometries that dominate in the ensemble of cluster states as the temperature changes.

Zandkarimi, Borna↗
DOE OSTI2020

In Situ Studies of Methanol Decomposition Over Cu(111) and Cu2O/Cu(111): Effects of Reactant Pressure, Surface Morphology, and Hot Spots of Active Sites

The dissociative adsorption of methanol was investigated on Cu(111) and ultrathin Cu 2 O films. We employed synchrotron-based Ambient Pressure X-ray Photoelectron Spectroscopy (AP-XPS) and Scanning Tunneling Microscopy (STM) to study the dynamics of gas–solid interactions, and calculations based on Density Functional Theory (DFT) were used to examine the reaction path. C 1s XPS spectra revealed that methanol underwent dissociative adsorption on plain Cu(111) to form methoxy (CH 3 O), formaldehyde (H 2 CO), and formate (HCOO) at a pressure range of 0.5–10 mTorr, with these species remaining on the surface after evacuation. This was accompanied by the appearance of a low coverage (~0.05 ML) of O ads in the O 1s which can be considered a highly active site for methanol activation. The high activity is apparent by a coverage of 0.8 ML of methoxy at room temperature. STM was unable to image these species at room temperature as they were highly mobile on metallic copper. In contrast, for CH 3 OH on Cu 2 O/Cu(111), STM showed clear hot spots for reaction and a complex array of adsorption structures. On the oxide substrate, there was decomposition of methanol to H 2 CO, CH 3 O, HCOO, and hydrocarbon species (CH x ) due to the subsequent interactions of methanol with lattice oxygen. Cu(111) remained entirely saturated with decomposition products under 10 mTorr of methanol (θ ≈ 0.97 ML), whereas the Cu 2 O overlayer was saturated at a much lower coverage (θ ≈ 0.30 ML). STM revealed rows and step edges of Cu 2 O decorated with decomposition products and metallic Cu islands ~5 nm in size. The difference in activity between Cu(111) and Cu 2 O/Cu(111) is attributed to the significant amount of O present on the oxide surface. Additionally, Density Functional theory (DFT) calculations described the XPS measurements well, showing a likely methanol dissociation to *CH 3 O and therefore a surface reduction. More importantly, the DFT results revealed that it was the chemisorbed oxygen on Cu 2 O/Cu(111) which oxidized the dissociated *CH 3 O to *HCOO and eventually CO 2 , while the reaction only involving upper oxygen on the Cu 2 O hexagonal ring led to the formation of H 2 CO.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effect of Gold Catalyst Surface Morphology on Wetting Behavior and Electrochemical CO 2 Reduction Performance in a Large-Area Zero-Gap Gas Diffusion Electrolyzer

We report catalyst surface area and wetting behavior are key factors in determining the performance of gas diffusion electrode (GDE) electrolyzers for electrochemical CO 2 reduction. In this work, we report the integration of sub-1 μm thick nanoporous gold (npAu) catalyst coatings into a large-area (25 cm 2 ) zero-gap electrolyzer. The npAu coatings were prepared by magnetron sputtering (MS) of thin AgAu alloy films on the microporous carbon layer of a gas diffusion layer (GDL) followed by Ag leaching. Compared to MS Au films of the same thickness, npAu catalyst coatings enable higher Faradaic efficiencies and improved catalyst stability for CO 2 -to-CO reduction with Faradaic efficiencies of up to 88% at 100 mA/cm 2 . For a 800 nm npAu coating, the device level energy efficiency for CO 2 to CO conversion reaches 45% (52% for CO + H 2 ) at 100 mA/cm 2 with a single pass CO 2 conversion efficiency of ~12%. Contact angle measurements reveal that npAu coatings provide a more hydrophobic electrode interface compared to MS Au coatings, suggesting that the more hydrophobic interfacial environment of npAu coatings helps mitigating electrode flooding which is associated with performance deterioration over time.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2020

Hydrogen migration at restructuring palladium–silver oxide boundaries dramatically enhances reduction rate of silver oxide

Heterogeneous catalysts are complex materials with multiple interfaces. A critical proposition in exploiting bifunctionality in alloy catalysts is to achieve surface migration across interfaces separating functionally dissimilar regions. Herein, we demonstrate the enhancement of more than 10 4 in the rate of molecular hydrogen reduction of a silver surface oxide in the presence of palladium oxide compared to pure silver oxide resulting from the transfer of atomic hydrogen from palladium oxide islands onto the surrounding surface formed from oxidation of a palladium-silver alloy. The palladium-silver interface also dynamically restructures during reduction, resulting in silver-palladium intermixing. This study clearly demonstrates the migration of reaction intermediates and catalyst material across surface interfacial boundaries in alloys with a significant effect on surface reactivity, having broad implications for the catalytic function of bimetallic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Electronic structure factors and the importance of adsorbate effects in chemisorption on surface alloys

The chemisorption energy is an integral aspect of surface chemistry, central to numerous fields such as catalysis, corrosion, and nanotechnology. Electronic-structure-based methods such as the Newns-Anderson model are therefore of great importance in guiding the engineering of material surfaces with optimal properties. However, existing methods are inadequate for interpreting complex, multi-metallic systems. Herein, we introduce a physics-based chemisorption model for alloyed transition metal surfaces employing primarily metal d-band properties that accounts for perturbations in both the substrate and adsorbate electronic states upon interaction. Importantly, we show that adsorbate-induced changes in the adsorption site interact with its chemical environment leading to a second-order response in chemisorption energy with the d-filling of the neighboring atoms. We demonstrate the robustness of the model on a wide range of transition metal alloys with O, N, CH, and Li adsorbates yielding a mean absolute error of 0.13 eV versus density functional theory reference chemisorption energies.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Adsorption of CO on gold: effect of coverage and surface deformations

Recent insights into the nature of catalysts under reactive conditions have motivated investigating heterogeneously catalyzed reactions with non-rigid surfaces. As an example system to revisit, CO interactions with gold have been a longstanding system of interest due to its structure sensitivity. In this work, we investigate coverage-dependent CO adsorption trends on terraces, steps, and kinks. Calculating differential binding energy and mean absolute displacement of the atomic structures as a function of CO coverage, we propose a deformation quenching mechanism that partially determines CO saturation coverage. Extending this analysis to consider CO partial pressure, we show a phase change in CO step occupation, which we highlight as a possible explanation for previously reported temperature-programmed desorption and Fourier-transform infrared reflection-absorption spectroscopy measurements. Furthermore, this work shows how adopting a non-rigid surface model can lead to additional insights which may be applied to other heterogeneously catalyzed systems.

Kavalsky, Lance [University of Wisconsin-Madison, ↗
DOE OSTI2023

Effect of thickness and surface composition on the stability of polarization in ferroelectric Hf x Zr 1 - x O 2 thin films

Using density functional theory, we find that tailoring the surface composition provides a route to stabilize the polar phases of the promising ferroelectric material, Hf x Zr 1-x O 2 . First, we show that for pure Hf O 2 , controlling the positively polarized surface to be relatively oxygen rich adequately screens the ferroelectric surface charges and stabilizes the polar orthorhombic phase. We then demonstrate that the ferroelectric polarization, as measured by the structural polar displacements, increases with decreasing thickness, leading to the emergence of a polar rhombohedral-like phase at the ultrathin limit (1.5 unit cells). Our findings extend to the cases of Hf 0.5 Zr 0.5 O 2 and Zr O 2 , both of which have surface energy landscapes similar to that of Hf O 2 . In conclusion, these findings are consistent with and offer insights into the observed absence of a ferroelectric thickness limit in Hf x Zr 1-x O 2 -based thin films.

36 MATERIALS SCIENCE↗