Search NASA⌕ Search

SEARCH · Search NASA

Results for “60”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Determination of the 60 Zn level density from neutron evaporation spectra

Nuclear reactions of interest for astrophysics and applications often rely on statistical model calculations for nuclear reaction rates, particularly for nuclei far from β stability. However, statistical model parameters are often poorly constrained, where experimental constraints are particularly sparse for exotic nuclides. For example, our understanding of the breakout from the NiCu cycle in the astrophysical rp-process is currently limited by uncertainties in the statistical properties of the proton-rich nucleus 60 Zn. We have determined the nuclear level density of 60 Zn using neutron evaporation spectra from 58 Ni( 3 He,n) measured at the Edwards Accelerator Laboratory. We compare our results to a number of theoretical predictions, including phenomenological, microscopic, and shell-model-based approaches. Notably, we find the 60 Zn level density is somewhat lower than expected for excitation energies populated in the 59 Cu(p,γ) 60 Zn reaction under rp-process conditions. This includes a level density plateau from roughly 5 to 6 MeV excitation energy, which is counter to the usual expectation of exponential growth and all theoretical predictions that we explore. Here, a determination of the spin distribution at the relevant excitation energies in 60 Zn is needed to confirm that the Hauser-Feshbach formalism is appropriate for the 59 Cu(p,γ) 60 Zn reaction rate at x-ray burst temperatures

59 ≤ A ≤ 89↗

Mass measurements of 60–63 Ga reduce x-ray burst model uncertainties and extend the evaluated T=1 isobaric multiplet mass equation

We report precision mass measurements of neutron-deficient gallium isotopes approaching the proton drip line. The measurements of 60–63 Ga performed with the TITAN multiple-reflection time-of-flight mass spectrometer provide a more than threefold improvement over the current literature mass uncertainty of 61 Ga and mark the first direct mass measurement of 60 Ga. The improved precision of the 61 Ga mass has important implications for the astrophysical rp process, as it constrains essential reaction Q values near the 60 Zn waiting point. Based on calculations with a one-zone model, we demonstrate the impact of the improved mass data on prediction uncertainties of x-ray burst models. The first-time measurement of the 60 Ga ground-state mass establishes the proton-bound nature of this nuclide, thus constraining the location of the proton drip line along this isotopic chain. Including the measured mass of 60 Ga further enables us to extend the evaluated T = 1 isobaric multiplet mass equation up to A = 60.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Pressure-Induced Dimerization of C 60 at Room Temperature as Revealed by an In Situ Spectroscopy Study Using an Infrared Laser

Using in situ high-pressure Raman spectroscopy and X-ray diffraction, the polymerization and structure evaluation of C 60 were studied up to 16 GPa at room temperature. The use of an 830 nm laser successfully eliminated the photo-polymerization of C 60 , which has interfered with the pressure effect in previous studies when a laser with a shorter wavelength was used as excitation. It was found that face-centered cubic (fcc) structured C 60 transformed into simple cubic (sc) C 60 due to the hint of free rotation for the C 60 at 0.3 GPa. The pressure-induced dimerization of C 60 was found to occur at about 3.2 GPa at room temperature. Our results suggest the benefit and importance of the choice of the infrared laser as the excitation laser.

36 MATERIALS SCIENCE↗

Nitinol 60 as a Material For Spacecraft Triboelements

The mechanical properties of Nitinol 60, 60 w/o Ni, 40 w/oTi (55 a/o Ni, 45 a/o Ti) are sufficiently attractive to warrant its consideration as a lubricated spacecraft triboelement. The ability to lubricate Nitinol 60 by the oils usually used on spacecraft mechanisms--Pennzane 2001A, Krytox 143AC and Castrol 815Z - was experimentally determined. These oils were run in the boundary lubrication regime for Nitinol 60 balls running against a 440C steel counterface in the vacuum spiral orbit tribometer. Test results consisting of the coefficient of friction versus time (friction traces) and relative degradation rates are presented. Contrary to the inability to successfully lubricate other metal alloys with high titanium content, it was found that Nitinol 60 is able to be lubricated by these oils. Overall, the results presented here indicate that Nitinol 60 is a credible candidate material for spacecraft bearing applications.

Pepper, Stephen V.↗

Crystallization of a Neptunyl Oxalate Hydrate from Solutions Containing Np V and the Uranyl Peroxide Nanocluster U 60 Ox 30

Uranyl peroxide nanoclusters are an evolving family of materials with potential applications throughout the nuclear fuel cycle. While several studies have investigated their interactions with alkali and alkaline earth metals, no studies have probed their interactions with the actinide elements. This work describes a system containing U 60 Ox 30 , [((UO 2 )(O 2 )) 60 (C 2 O 4 ) 30 ] 60- , and neptunium(V) as a function of neptunium concentration. Ultra-small and small angle X-ray scattering were used to observe these interactions in the aqueous phase, and X-ray diffraction was used to observe solid products. The results show that neptunium induces aggregation of U 60 Ox 30 when the neptunium concentration is ≤ 10 mM, whereas (NpO 2 ) 2 C 2 O 4 ·6H 2 O(cr) and studtite ultimately form at 15–25 mM neptunium. Finally, the latter result suggests that neptunium coordinates with the bridging oxalate ligands in U 60 Ox 30 , leaving metastable uranyl peroxide species in solution, and is an important finding given the potential application of uranyl peroxide nanoclusters in the recycling of used nuclear fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Influence of Surface Ligands on Energetics at FASnI 3 /C 60 Interfaces and Their Impact on Photovoltaic Performance

Interfacial chemistry and energetics significantly impact the performance of photovoltaic devices. In the case of Pb-containing organic metal halide perovskites, photoelectron spectroscopy has been used to determine the energetic alignment of frontier electronic energy levels at various interfaces present in the photovoltaic device. For the Sn-containing analogues, which are less toxic, no such measurements have been made. Through a combination of ultraviolet, inverse, and X-ray photoelectron spectroscopy (UPS, IPES, and XPS, respectively) measurements taken at varying thickness increments during stepwise deposition of C 60 on FASnI 3 , we present the first direct measurements of the frontier electronic energy levels across the FASnI 3 /C 60 interface. The results show band bending in both materials and transport gap widening in FASnI 3 at the interface with C 60 . The XPS results show that iodide diffuses into C 60 and results in n-doping of C 60 . This iodide diffusion out of FASnI 3 impacts the valence and conduction band energies of FASnI 3 more than the core levels, with the core level shifts displaying a different trend than the valence and conduction bands. Surface treatment of FASnI 3 with carboxylic acids and bulky ammonium substituted surface ligands results in slight alterations in the interfacial energetics, and all surface ligands result in similar or improved PV performance relative to the untreated devices. Finally, the greatest PV stability results from treatment with a fluorinated carboxylic acid derivative; however, iodide diffusion is still observed to occur with this surface ligand.

interfacial energetics↗

Enhanced production of 60 Fe in massive stars

Massive stars are a major source of chemical elements in the cosmos, ejecting freshly produced nuclei through winds and core-collapse supernova explosions into the interstellar medium. Among the material ejected, long-lived radioisotopes, such as 60 Fe (iron) and 26 Al (aluminum), offer unique signs of active nucleosynthesis in our galaxy. There is a long-standing discrepancy between the observed 60 Fe/ 26 Al ratio by γ-ray telescopes and predictions from supernova models. This discrepancy has been attributed to uncertainties in the nuclear reaction networks producing 60 Fe, and one reaction in particular, the neutron-capture on 59 Fe. Here we present experimental results that provide a strong constraint on this reaction. We use these results to show that the production of 60 Fe in massive stars is higher than previously thought, further increasing the discrepancy between observed and predicted 60 Fe/ 26 Al ratios. The persisting discrepancy can therefore not be attributed to nuclear uncertainties, and points to issues in massive-star models.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

In-Canal Assay of High Specific Activity 60 Co at the Advanced Test Reactor

Production of high specific activity (HSA) 60 Co has recently resumed at the Advanced Test Reactor (ATR) at the Idaho National Laboratory. The technical steps of performing in-canal assay of HSA 60 Co targets at the ATR are described herein. The HSA targets are assayed on a regular basis, between cycles at the ATR, in order to assess the progress of activation. The targets are also assayed at the conclusion of the irradiation in order to provide activity estimates for the distributor and to be used for safety and shipping evaluations. These target assay activities must take place in the ATR canal to provide sufficient radiological shielding. Furthermore, a specialized assay fixture is used in conjunction with custom 60 Co radiation standards to assess the irradiated target. The specific activity of each irradiated target was determined by first measuring the 60 Co standards to determine a sensitivity factor. Then, each irradiated target was measured, and the integrated measurement was multiplied by the sensitivity factor to determine the total activity of the irradiated target. Finally, a correction factor was determined to adjust the reported activity, accounting for differences in the physical geometries of the standards and targets. These methods were used to accurately assay the gross activity of nine irradiated 60 Co targets, two of which were delivered to the distributor where confirmatory hot-cell assays were performed verifying the accuracy of the in-canal assay method.

07 ISOTOPE AND RADIATION SOURCES↗

Density functional study of the variants of inter-Coulombic decay resonances in the photoionization of Cl@C 60

Inter-Coulombic decay (ICD) resonances in the photoionization of Cl@C 60 endofullerene molecule are calculated using a perturbative density functional theory (DFT) method. This is the first ICD study of an open shell atom in a fullerene cage. Here, three classes of resonances are probed: (i) Cl inner vacancies decaying through C 60 outer continua, (ii) C 60 inner vacancies decaying through Cl outer continua, and (iii) inner vacancies of either system decaying through the continua of Cl-C 60 hybrid levels, the hybrid Auger-ICD resonances. Comparisons with Ar@C 60 results reveal that the properties of hybrid Auger-ICD resonances are affected by the extent of level hybridization.

74 ATOMIC AND MOLECULAR PHYSICS↗

A Quantum Mechanical MP2 Study of the Electronic Effect of Nonplanarity on the Carbon Pyramidalization of Fullerene C 60

Among C 60 ’s diverse functionalities, its potential application in CO 2 sequestration has gained increasing interest. However, the processes involved are sensitive to the molecule’s electronic structure, aspects of which remain debated and require greater precision. To address this, we performed structural optimization of fullerene C 60 using the QM MP2/6–31G* method. The nonplanarity of the optimized icosahedron is characterized by two types of dihedral angles: 138° and 143°. The 120 dihedrals of 138° occur between two hexagons intersecting at C–C bonds of 1.42 Å, while the 60 dihedrals of 143° are observed between hexagons and pentagons at C–C bonds of 1.47 Å. NBO analysis reveals less pyramidal sp 1.78 hybridization for carbons at the 1.42 Å bonds and more pyramidal sp 2.13 hybridization for the 1.47 Å bonds. Electrostatic potential charges range from -0.04 a.u. to 0.04 a.u. on the carbon atoms. Second-order perturbation analysis indicates that delocalization interactions in the C–C bonds of 1.42 Å (143.70 kcal/mol) and 1.47 Å (34.98 kcal/mol) are 22% and 38% higher, respectively, than those in benzene. MP2/Def2SVP calculations yield a correlation energy of 13.49 kcal/mol per electron for C 60 , slightly higher than the 11.68 kcal/mol for benzene. However, the results from HOMO-LUMO calculations should be interpreted with caution. This study may assist in the rational design of fullerene C 60 derivatives for CO 2 reduction systems.

36 MATERIALS SCIENCE↗

NASA 60 GHz intersatellite communication link definition study. Addendum A: Mixed baseband and IF signals

As part of a definition study for a 60 GHz intersatellite communications link system (ICLS), baseline design concepts for a channelized crosslink were identified. The crosslink would allow communications between geostationary satellites of the planned Tracking and Data Acquisition System (TDAS) and would accommodate a mixture of frequency translation coherent links (bent pipe links) and baseband-in/baseband-out links (mod/demod links). A 60 GHz communication system was developed for sizing and analyzing the crosslink. For the coherent links this system translates incoming signals directly up to the 60 GHz band; trunks the signals across from one satellite to a second satellite at 60 GHz then down converts to the proper frequency for re-transmission from the second satellite without converting to any intermediate frequencies. For the baseband-in/baseband-out links the baseband data is modulated on to the 60 GHz carrier at the transmitting satellite and demodulated at the receiving satellite. The frequency plan, equipment diagrams, and link calculations are presented along with results from sizing and reliability analyses.

Source record↗

Gender Differences in Isokinetic Strength after 60 and 90 d Bed Rest

Recent reports suggest that changes in muscle strength following disuse may differ between males and females. PURPOSE: To examine potential gender differences in strength changes following 60 and 90 d of experimental bed rest. METHODS: Isokinetic extensor and flexor strength of the knee (60deg and 180deg/s, concentric only), ankle (30deg/s, concentric and eccentric), and trunk (60deg/s, concentric only) were measured following 60 d (males: n=4, 34.5+/-9.6 y; females: n=4, 35.5+/-8.2 y) and 90 d (males: n=10, 31.4+/-4.8 y; females: n=5, 37.6+/-9.9 y) of 6-degree head-down-tilt bed rest (BR; N=23). Subjects were fed a controlled diet (55%/15%/ 30%, CHO/PRO/FAT) that maintained body weight within 3% of the weight recorded on Day 3 of bed rest. After a familiarization session, testing was conducted 6 d before BR and 2 d after BR completion. Peak torque and total work were calculated for the tests performed. To allow us to combine data from both 60- and 90-d subjects, we used a mixed-model statistical analysis in which time and gender were fixed effects and bed rest duration was a random effect. Log-transformations of strength measures were utilized when necessary in order to meet statistical assumptions. RESULTS: Main effects were seen for both time and gender (p<0.05), showing decreased strength in response to bed rest for both males and females, and males stronger than females for most strength measures. Only one interaction effect was observed: females exhibited a greater loss of trunk extensor peak torque at 60 d versus pre-BR, relative to males (p=0.004). CONCLUSION: Sixty and 90 d of BR induced significant losses in isokinetic muscle strength of the locomotor and postural muscles of the knee, ankle, and trunk. Although males were stronger than females for most of the strength measures that we examined, only changes in trunk extensor peak torque were greater for females than males at day 60 of bed rest

English, K. L.↗

The Effect of Various Quenchants on the Hardness and Microstructure of 60-NITINOL

The effect of various quenching media on the hardness and microstructure of 60 NITINOL (60 NiTi) were evaluated. Specimens of 60 NiTi were heat treated in air at 1000 degC for 30 min or 2 hr, then quench cooled by one of seven different methods. The microstructure and hardness of this material was examined post heat treatment. The results indicated that the quench method had little effect on the resulting hardness and microstructure of 60 NiTi.

Quench↗

Heterogeneous Catalysis by Fullerene C 60 : Photocatalytic Dehydro‐Dimerization of Primary Amines and Tetrahydroquinolines Studied Using Thread Spray Mass Spectrometry

Abstract Removal of a catalyst after a catalytic process is a time‐consuming and challenging process. In this paper, a fullerene catalyst coated on cellulose thread is developed and applied it in a heterogeneous photoreaction screening via a thread spray mass spectrometry (MS) platform. The surface of the cellulose thread is modified with NH 2 groups, which subsequently allows immobilization of fullerene C 60 on the thread. The final fullerene functionalized thread is placed in a glass capillary and the solution of the reactant to be interrogated is added. The assembly of thread and glass capillary is placed in front of a mass spectrometer, which serves as an online photoreaction platform after a light source and direct current high voltage are applied. As an ambient ionization approach, the photocatalytic reaction screening platform enabled real‐time MS characterization of products and intermediates and using only nanomole quantities of reactants. Fullerene C 60 is identified to facilitate dehydro‐dimerization reactions from amines. Norharmane shows a unique photo‐oxygenated dimer formation. The functionalized threads immobilized with fullerene C 60 are reusable, confirming the heterogeneous nature of the platform. Thus, this system provided real‐time screening of reactions catalyzed by fullerene C 60 and a means to investigate the reaction mechanism.

Chemistry↗

Efficient Construction of a C 60 Interlayer for Mechanically Robust, Dendrite-free, and Ultrastable Solid-State Batteries

Interfacial instability between solid electrolytes (SEs) and lithium metal remains a daunting challenge for solid-sate batteries. Here, a conformal C 60 interlayer is efficiently constructed on Li 1.5 Al 0.5 Ge 1.5 (PO 4 ) 3 (LAGP) SEs by physical vapor deposition, and an ideal interfacial contact is achieved via forming an ionically conducting matrix of LixC60 with lithium metal. The obtained Li x C 60 is beneficial to hinder the growth of lithium dendrites at interface and release the local stress during the lithiation and delithiation. As a result, the Li/LAGP-C 60 /Li symmetric cells demonstrate ultra-stable cycling performance for more than 4,500 h at a current density of 0.034 mA cm -2 . The Li/LAGP-C 60 /LiFePO 4 full cells deliver a reversible capacity of 152.4 mAh g -1 at room temperature, and the capacity retention rate is 85% after more than 100 cycles. This work provides a feasible and scalable strategy to improve the SEs/Li interface for high-performance solid-state batteries.

25 ENERGY STORAGE↗

High-pressure Cr 3+ luminescence and Raman spectroscopy of a natural MgAl 2 O 4 spinel to ∼60 GPa

Cr 3+ luminescence and Raman spectroscopy of a natural spinel were collected up to ∼60 GPa at ambient temperature using a Ne or a 4:1 methanol-ethanol mixture as the pressure transmitting media. Here, in the Ne experiments above ∼40 GPa, and in the 4:1 methanol–ethanol experiments above ∼20 GPa, all luminescence emission lines shift non-linearly, and by 59 GPa the spectra are broadened and are significantly changed. The Raman modes shift smoothly to higher frequencies with pressure, with a slight change in slope above 40 GPa, with no kinks or discontinuities. By ∼60 GPa, only the most intense Eg mode remains resolvable, appearing broadened and reduced in intensity. The change in slope in the Raman modes and luminescence bands may be due to a change in the compression mechanism of spinel. When spinel was decompressed from 40 GPa all changes were fully reversible; however, when the samples were decompressed from 54 to 60 GPa in Ne and 59 GPa in 4:1 methanol-ethanol the spectra were irreversibly changed. The change in the luminescence spectra and the Raman spectra are likely due to a pressure induced disorder of the anions or partial amorphization between 40 and 60 GPa.

Cr3+↗

Boosting Photoelectric Conductivity in Porphyrin-Based MOFs Incorporating C 60

Electronic structure calculations show that guest C60 in the porphyrin-containing metal organic frameworks Zn 2 (TCPB)(DA-ZnP) (DA-MOF; H 4 TCPB = 1,2,4,5-tetrakis(4-carboxyphenyl)benzene, DA-ZnP = [5,15-bis[(4-pyridyl)ethynyl]-10,20-diphenylporphinato]zinc(II)) and Zn 2 (TCPB)(F-ZnP) (F-MOF; F-ZnP = [5,15-di(4-pyridyl)-10,20-bis(pentafluorophenyl)porphinato]zinc(II)) engenders high photoelectrical conductivity due to efficient donor–acceptor charge-transfer (CT) interactions. Structural modifications at the meso position of the porphyrin influence the preferred positions of C 60 within the frameworks, giving rise to host–guest interactions with different anisotropic structural, electronic, and optoelectronic properties. A preferred slipped-parallel π-stacked interaction of C 60 that is predicted for NH 2 -substituted DA-MOF and F-MOF fosters strong CT transitions and lowers band gaps by ~1.0 eV compared to the pristine DA-MOF and F-MOF. Hopping rates computed using Marcus theory are found to be anisotropic and accelerated by multiple orders of magnitude across π-stacked interfaces created by C 60 incorporation, a consequence of strong electronic coupling between initial and final diabatic states. Calculations indicate that photoinduced electron transfer, as well as direct CT from porphyrin to C 60 upon irradiation, triggers a charge separation process that leads to the formation of what should be long-lived electron-trapped states at the heterojunctions. Lastly, design principles revealed here for the control of photophysical and electron-transfer processes will be useful for constructing new MOF-derived visible- and infrared-based optoelectronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Isocyanide-Induced Annulation Leading to Cyclopento-, Methano-, and Cyclopentano-[60]Fullerene Derivatives

The three-component annulation reactions of C 60 , alkyl isocyanide, and dimethyl acetylenedicarboxylate (DMAD) or unsymmetric alkynes are investigated to afford cyclopent-2-en-1-imino- and ketenimine methano-[60]fullerene derivatives, which, upon hydration in the presence of acid, yield the corresponding fullerene amides. Dimethyl 2,3-pentadienedioate, the allene counterpart of DMAD, and ethyl buta-2,3-dienoate undergo four-component annulation with C 60 , alkyl isocyanide, and water under similar conditions to yield cyclopentano-[60]fullerene derivatives with similar amide groups.

36 MATERIALS SCIENCE↗