SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This document investigates the region of validity of the DIORAMA nuclear cloud lofting module based on two separate factors: i) continuum fluid assumptions breaking down and ii) where ballistic effects become significant.
The LaAlO 3 /SrTiO 3 interface hosts a plethora of gate‐tunable electronic phases. Gating of LaAlO 3 /SrTiO 3 interfaces is usually assumed to occur electrostatically. However, increasing evidence suggests that non‐local interactions can influence and, in some cases, dominate the coupling between applied gate voltages and electronic properties. Here, quasi‐1D ballistic electron waveguides are sketched at the LaAlO 3 /SrTiO 3 interface as a probe to understand how gate tunability varies as a function of spatial separation. Gate tunability measurements reveal the scaling law to be at odds with the pure electrostatic coupling observed in traditional semiconductor systems. The non‐Coulombic gating at the interface is attributed to a long‐range nanoelectromechanical coupling between the gate and electron waveguide, possibly mediated by the ferroelastic domains in SrTiO 3 . The long‐range interactions at the LaAlO 3 /SrTiO 3 interface add unexpected richness and complexity to this correlated electron system.
Abstract Quantum transport can distinguish between dynamical phases of matter. For instance, ballistic propagation characterizes the absence of disorder, whereas in many-body localized phases, particles do not propagate for exponentially long times. Additional possibilities include states of matter exhibiting anomalous transport in which particles propagate with a non-trivial exponent. Here we report the experimental observation of anomalous transport across a broad range of the phase diagram of a kicked quasicrystal. The Hamiltonian of our system has been predicted to exhibit a rich phase diagram, including not only fully localized and fully delocalized phases but also an extended region comprising a nested pattern of localized, delocalized and multifractal states, which gives rise to anomalous transport. Our cold-atom realization is enabled by new Floquet engineering techniques, which expand the accessible phase diagram by five orders of magnitude. Mapping transport properties throughout the phase diagram, we observe disorder-driven re-entrant delocalization and sub-ballistic transport, and we present a theoretical explanation of these phenomena based on eigenstate multifractality.
ABSTRACT We perform two-dimensional (2D) numerical simulations of core convection for zero-age main-sequence stars covering a mass range from 3 to 20 M⊙. The simulations are performed with the fully compressible time-implicit code music. We study the efficiency of overshooting, which describes the ballistic process of convective flows crossing a convective boundary, as a function of stellar mass and luminosity. We also study the impact of artificially increasing the stellar luminosity for 3 M⊙ models. The simulations cover hundreds to thousands of convective turnover time-scales. Applying the framework of extreme plume events previously developed for convective envelopes, we derive overshooting lengths as a function of stellar masses. We find that the overshooting distance (dov) scales with the stellar luminosity (L) and the convective core radius (rconv). We derive a scaling law $d_{\rm ov} \propto L^{1/3} r_{\rm conv}^{1/2}$, which is implemented in a one-dimensional stellar evolution code and the resulting stellar models are compared to observations. The scaling predicts values for the overshooting distance that significantly increase with stellar mass, in qualitative agreement with observations. Quantitatively, however, the predicted values are underestimated for masses ≳10 M⊙. Our 2D simulations show the formation of a nearly adiabatic layer just above the Schwarzschild boundary of the convective core, as exhibited in recent three-dimensional simulations of convection. The most luminous models show a growth in size with time of the nearly adiabatic layer. This growth seems to slow down as the upper edge of the nearly adiabatic layer gets closer to the maximum overshooting length and as the simulation time exceeds the typical thermal diffusive time-scale in the overshooting layer.
Achieving ballistic ion transport in a mixed electronic-ionic conductive polymer, its hierarchically ordered structure (HOS) facilitates ion diffusion and results in solid-state Li + conductivity in the range of 10 −4 to 10 −3 S cm −1 from −20 to 70 °C.
Gold-tantalum alloy films are of interest for biomedical and magnetically-assisted inertial confinement fusion applications. Here, we systematically study the effects of substrate tilt (0°–80°) and negative substrate bias (0–100 V) on properties of ≲3-μm-thick films deposited by high-power impulse magnetron sputtering (HiPIMS) from a Au–Ta alloy target (with 80 at. % of Ta). Results reveal that, for all the substrate bias values studied, an increase in substrate tilt leads to a monotonic decrease in film thickness, density, residual compressive stress, and electrical conductivity. Larger substrate bias favors the formation of a body-centered cubic phase, with films exhibiting lower column tilt and higher density, electrical conductivity, and residual compressive stress. Furthermore, these changes are attributed to metal atom ionization effects, based on the lack of correlation with distributions of landing energies and incident angles of depositing species as calculated by Monte Carlo simulations of ballistic collisions and gas phase atomic transport. By varying substrate tilt and bias in HiPIMS deposition, properties of Au–Ta alloy films can be controlled in a very wide range, including residual stress from –2 to +0.5 GPa, density from 12 to 17 g/cm 3 , and the electrical resistivity from 50 to 4500 μΩ cm, enabling optimum deposition conditions to be selected for specific applications.
Highlights: • Regime of validity of the Fermi liquid theory in 2D interacting Fermi systems has been investigated. • Phase diagram for hydrodynamic and ballistic regimes in the frequency–temperature space has been obtained. • Temperature correction to quasiparticle effective mass has been calculated. • 2D Wiedemann–Franz law and 2D Kadawoki–Woods relation have been discussed. We describe an analytical theory investigating the regime of validity of the Fermi liquid theory in interacting, via the long-range Coulomb coupling, two-dimensional Fermi systems comparing it with the corresponding 3D systems. We find that the 2D Fermi liquid theory and 2D quasiparticles are robust up to high energies and temperatures of the order of Fermi energy above the Fermi surface, very similar to the corresponding three-dimensional situation. We calculate the phase diagram in the frequency–temperature space separating the collisionless ballistic regime and the collision-dominated hydrodynamic regime for 2D and 3D interacting electron systems. We also provide the temperature corrections up to third order for the renormalized effective mass, and comment on the validity of 2D Wiedemann–Franz law and 2D Kadawoki–Woods relation.
We perform transport measurements on proximitized, ballistic, bilayer graphene Josephson junctions (BGJJs) in the intermediate-to-long junction regime (L > ξ). We measure the device’s differential resistance as a function of bias current and gate voltage for a range of different temperatures. The extracted critical current IC follows an exponential trend with temperature: exp(−k B T/δE). Here δE = ħν F /2πL: an expected trend for intermediate-to-long junctions. From δE, we determine the Fermi velocity of the bilayer graphene, which is found to increase with gate voltage. Simultaneously, we show the carrier density dependence of δE, which is attributed to the quadratic dispersion of bilayer graphene. This is in contrast to single layer graphene Josephson junctions, where δE and the Fermi velocity are independent of the carrier density. The carrier density dependence in BGJJs allows for additional tuning parameters in graphene-based Josephson junction devices.
The thermal conductivity of UO 2 fuel needs to be high enough to dissipate the heat generated from the fission reaction. Since grain size affects thermal conductivity and grain size can evolve with irradiation, it is critical to understand in-reactor UO 2 grain growth. Most studies of grain growth in UO 2 are based on thermally driven processes at elevated temperatures. However, studies have shown that grain growth can occur even at cryogenic temperatures by ballistic processes. Such irradiation-induced grain growth in UO 2 is yet to be studied. Advanced in-situ Kr ion irradiation and transmission electron microscopy were systematically performed on nanocrystalline UO 2 thin films at temperatures ranging from 50 K to 1073 K; grain growth was observed at all temperatures. A combination of manual and machine learning techniques was used to measure and plot grain size evolution against irradiation fluence at various irradiation temperatures. The machine learning method has significantly improved the analysis efficiency and reduced human labors. The grain diameter data were fitted using classical grain growth and thermal spike models to describe grain growth kinetics with and without irradiation effect. Grain growth during low temperature irradiation (≤ 475 K) can be well described by the thermal spike model. Above 475 K, there were additional thermally assisted processes that further accelerate the grain growth. At the highest irradiation temperature about 1075 K, both irradiation-induced dislocation loops and cavities/bubbles were observed to form in the UO 2 . In this report, the effects of irradiation-induced defects on grain growth kinetics are discussed.
The multiple scattering of an ultrashort laser pulse by a turbid dispersive medium (namely a cloud of bubbles in water) is investigated by means of Monte Carlo simulations. The theory of Gouesbet and Gréhan (2000) is used to derive an energetic model of the scattering transient. It is shown that the spreading and extinction of the pulse can be decoupled from the transient of scattering, which allows to describe each phenomenon individually. The transient of scattering is modeled with the Lorenz-Mie Theory and thus is also valid for a relative refractive index lower than one, contrary to the Debye series expansion which does not converge close to the critical angle. This is made possible after the introduction of a new physical object, the Scattering Impulse Response Function (SIRF) which allows to detect the different modes of scattering transient, in time and direction. Here the present approach is more generic, as it enables to simulate clouds of air bubbles in water, which was not possible previously. Two different approaches are proposed within the Monte Carlo framework. The first is a pure Monte Carlo approach where the delay due to the scattering is randomly drawn at each event, while the second is based on the transport of the whole scattering signal. They are both embedded in the Monte Carlo code Scatter3D. Both models produce equivalent trends and are validated against published numerical results. They are then applied to the multiple scattering of ultra short pulse by a cloud of bubble in water in the forward direction. The pulse spread due to the propagation in water is computed for a wide range of traveled distances and pulse durations, and the optimal pulse duration is given to minimize the pulse spread at a given distance. The main result is that the scattered photons exit the turbid medium earlier than the ballistic photons and produce a double peak related to the refraction in the bubble. This demonstrates the possibility to develop new diagnostics to characterize dynamic bubbly flows.
Gold-tantalum (Au—Ta) alloys are promising for next-generation hohlraums for magnetically-assisted indirect-drive inertial confinement fusion. Hohlraum fabrication involves sputter deposition of ultrathick coatings on sphero-cylindrical substrates. The control of physical properties of such coatings remains a challenge. Here, in this work, we systematically study effects of the growth rate and dynamic substrate tilt on properties of AuTa 4 films deposited onto rotating planar substrates mounted at different tilt angles to mimic different regions of the sphero-cylindrical surface of a hohlraum. We use high-power impulse magnetron sputtering (HiPIMS) in the constant charge per pulse mode with a pulse duration of 100 μs, a charge per pulse of 190 μC, a peak target current of about 3 A, and the pulse frequency varied in the range of 400–1400 Hz. The Langmuir probe, mass-resolved ion energy spectrometry, and optical emission spectroscopy are used to monitor plasma discharge characteristics in order to isolate and study effects of the growth rate. The deposition rate and the ballistics and energetics of depositing species are estimated by Monte Carlo simulations. Results show that the film microstructure, crystallographic phase, residual stress, and electrical resistivity strongly depend on both the deposition rate and substrate tilt, highlighting their critical role in tailoring properties of Au—Ta films during hohlraum fabrication.
The details of the curing process of epoxy resins are notoriously difficult to ascertain, hampering polymer matrix composite manufacturing. Here, the curing of a series of six epoxy resins containing dilute spherical nanoparticles was investigated via X-ray photon correlation spectroscopy (XPCS). The resin formulation was varied to achieve a range of crosslink densities and topologies. Prior to gelation, the viscosities obtained from XPCS agreed with bulk rheology. A clear dynamic transition was detected in all samples, where the q-scaling changes from approximately q2 .2 to q 1 , indicating a transition from sub-diffusive to ballistic-like nanoparticle motion. For the samples with a high crosslink density, this change was abrupt and coincided with gelation, and there was no evidence of crosslink heterogeneity. Chain entanglement played a role in the transition for samples with lower crosslink density. Finally, this work reveals the potential of XPCS to deliver new quantitative insights into the curing process of thermosetting resins.
Abstract Thin layered mats comprised of an interconnected meandering network of multiwall carbon nanotubes (MWCNT) are subjected to a hypersonic micro‐projectile impact test. The mat morphology is highly compliant and while this leads to rather modest quasi‐static mechanical properties, at the extreme strain rates and large strains resulting from ballistic impact, the MWCNT structure has the ability to reconfigure resulting in extraordinary kinetic energy (KE) absorption. The KE of the projectile is dissipated via frictional interactions, adiabatic heating, tube stretching, and ultimately fracture of taut tubes and the newly formed fibrils. The energy absorbed per unit mass of the film can range from 7–12 MJ kg −1 , much greater than any other material.
The demand for high performance ceramic and metal components with complex geometry necessitates developments in powder handling and green body shaping. Here, in this study, vibrational powder deposition is adapted to three-dimensional printing with the ability to modulate packing fraction during printing. Boron carbide powder with sub-micron primary particle size is printed over a packing fraction range of 25.0 % to 46.5 % (below the poured density to above the tapped density). Solid metal powders are printed at 67.5 %, which enables novel freestanding, vertical-walled features without binder. These capabilities introduce opportunities for more complex geometries in high-performance materials, e.g. large-scale uniaxial hot-pressing of ceramic ballistic armor components with graded thickness and three-dimensional curved or stepped features (by compensating for displacement differences during compaction). This technology also enables multi-material patterning of additive manufacturing powder beds with reduced feedstock quantity requirements and wastage.
When Bloch electrons in a solid are exposed to a strong optical field, they are coherently driven in their respective bands where they acquire a quantum phase as the imprint of the band shape. If an electron approaches an avoided crossing formed by two bands, it may be split by undergoing a Landau-Zener transition. We here employ subsequent Landau-Zener transitions to realize strong-field Bloch electron interferometry (SFBEI), allowing us to reveal band structure information. In particular, we measure the Fermi velocity (band slope) of graphene in the vicinity of the K points as 1.07±0.04 nm fs –1 . As a result, we expect SFBEI for band structure retrieval to apply to a wide range of material systems and experimental conditions, making it suitable for studying transient changes in band structure with femtosecond temporal resolution at ambient conditions.
Focused ion beam (FIB) technology has a large potential for precise milling of ultrahard materials such as diamond. However, studies of the sputtering of diamond with ion species and energies relevant to the FIB technology are scarce. Here, we report a systematic study of the sputtering of polycrystalline diamond surfaces with ion beams in a wide range of ion energies (2 - 30 keV), incident beam angles (0 - 80°), and ion masses (N, O, Ar, and Xe). Results show that the sputter yield is relatively insensitive to ion energy but strongly depends on the ion species and incident beam angles. Bombardment with O ions results in sputter yields that are significantly larger than ballistic predictions due to chemical etching effects. Characteristic surface ripples develop for oblique beam incidence angle irradiation. The critical beam tilt angle for the onset of ripple formation and the wavelength of the ripples depend on ion species and energies. Ripples appear to suppress ion reflection at high beam tilt angles and, hence, a peak in the sputter yield angular dependence. In conclusion, these results have direct implications for the development of process parameter maps for high-precision ion-beam milling of diamond.
We describe here the crossover from generalized to conventional hydrodynamics in nearly integrable systems. Integrable systems have infinitely many conserved quantities, which spread ballistically, in general. When integrability is broken, only a few of these conserved quantities survive. The remaining conserved quantities are generically transported diffusively; we further derive a compact and general diffusion equation for these. The diffusion constant depends on the matrix elements of the integrability-breaking perturbation; for a certain class of integrability-breaking perturbations, including long-range interactions, the diffusion constant can be expressed entirely in terms of generalized hydrodynamic data.