Search NASA⌕ Search

SEARCH · Search NASA

Results for “FERROCENE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

29 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Redox Potentials for Hydrogen Species in Acetonitrile and Tetrahydrofuran

The properties of the fundamental hydrogen species, proton (H+), hydrogen atom (H•), and hydride anion (H-) are critical to a vast range of chemical processes, yet their thermodynamic properties in nonaqueous solvents are not well established. A hybrid supermolecule-continuum approach is used to predict the Gibbs free energies of solvation (?G°solv) and standard redox potentials (E°) for the 2H+/H2 and H•/H- couples in acetonitrile (MeCN) and tetrahydrofuran (THF) following the approach previously used for water. Gas phase geometry optimizations were done using density functional theory (DFT) with the ?B97XD functional, Møller-Plesset second-order perturbation theory (MP2) with augmented correlation-consistent basis sets and composite-correlated molecular orbital theory (G3MP2 and G3MP2B3). Additional single point calculations in gas phase were performed for H- affinity for MeCN and THF at the coupled cluster CCSD(T) level using MP2 geometries. Solvation was included using the self-consistent reaction field SMD model. For H+, the ?G°solv values are predicted to be -252.2 kcal/mol in MeCN and -261.0 kcal/mol in THF. The redox potentials for the 2H+/H2 couple are +0.49 V in MeCN and +0.11 V in THF relative to the aqueous SHE, consistent with the available experimental data. The ?G°solv for H- is predicted to be -80 kcal/mol in MeCN and -68 in THF, and for H•, ?G°solv is predicted to be -1.3 kcal/mol in THF and -2.0 kcal/mol in MeCN. These solvation energies yield respective calculated redox potentials for the H•/H- couple of -0.14 V in MeCN and -0.68 V in THF relative to the aqueous SHE. H2 solvation is slightly exergonic in MeCN (-3.3 kcal/mol) and near thermoneutral in THF (+1.3 kcal/mol). The pKa(H2) is predicted to be 45.4 in MeCN and 47.8 in THF. The proton-coupled electron transfer (PCET) accounting term CG was evaluated giving values on the ferrocene scale within approximately 2 kcal/mol of literature in both solvents. These results provide benchmarks for hydrogen redox chemistry in MeCN and THF and improve consistency across E°, ?G°solv, pKa, and CG. These results provide benchmarks for hydrogen redox chemistry in nonaqueous media challenging previous estimates based on indirect extrapolations and assumptions.

Duda, Damian P.↗
DOE OSTI2025

Conformational Control as a Design Strategy to Tune the Redox Behavior of Benzotriazole Negolytes for Nonaqueous Flow Batteries

Here, we present a molecular engineering strategy to tune the reduction potentials of benzotriazole derivatives as high-energy-density negolytes in nonaqueous redox flow batteries. Within nonaqueous electrolytes, these derivatives, notably 2-(o-tolyl)-2H-benzo[d][1,2,3]triazole (1), demonstrate a theoretical capacity of up to 93.8 Ah L⁻¹ and a reduction potential of –2.35 V vs ferrocene/ferrocenium (Fc/Fc⁺). Introducing dimethyl substitution (i.e., 2-(2,6-dimethylphenyl)-2H-benzo[d][1,2,3]triazole (4)) shifts the reduction potential even more negatively to –2.55 V vs Fc/Fc⁺. We ascribe the nonlinear effect of dimethyl substitution on reduction potential to ground-state conformational effects. Flow battery tests with negolyte 1 and ferrocene posolyte demonstrated >90% Coulombic efficiency at 6.7 mA cm⁻² with improved cyclability in the presence of lithium bis(trifluoromethylsuylfonyl)imide supporting salt.

25 ENERGY STORAGE↗
DOE OSTI2025

Immobilizing a Lehn-Type Catalyst with Nitrocyclocondensation Chemistries: CO 2 Reduction on Silicon Hybrid Photoelectrodes

Here, we present the first examples of installing a redox reporter and CO 2 reduction (CO 2 R) catalyst onto freshly HF-etched Si (photo)­electrodes using a solution-phase nitrocyclocondensation (NCC) reaction. Previous studies detailed the mechanism of NCC reactions on Si under ultrahigh vacuum conditions but have not applied these chemistries to generate functional (photo)­electrodes. Installing 4-nitrophenyl ferrocene (4-NpFc) molecules directly onto degenerately doped p + Si allowed us to evaluate the effects of different NCC reaction conditions on coverage (e.g., 3.6 ± 1.2 × 10 –11 mol/cm 2 ) and electrochemical reversibility. The 4-NpFc molecules remained immobilized under the reducing potentials (−2.0 V vs Fc +/0 in acetonitrile) needed to drive molecular CO 2 R catalysts. Installing 4-nitroaniline (4-NA) molecules onto low-doped pSi allowed us to couple Lehn-type Re­(I) catalysts with pendant carboxylic acids. The CO Faradaic efficiency of CO production under 1-sun illumination (−2.15 V vs Fc +/0 ) was 23% in CO 2 -saturated electrolyte, a value that surpasses previous examples of CO 2 R catalyst monolayers on Si. These two examples highlight the versatility of solution-phase NCC attachment chemistries for generating functional Si (photo)­electrodes.

catalysis↗
DOE OSTI2025

Single-Walled Carbon Nanotubes with Confined Chalcogens as the Catalysts and Electrodes for Oxygen Reduction Reaction in Fuel Cells

The goal of this project is to synthesize and characterize a new non-metal electro-catalyst for oxygen reduction reaction (ORR) for fuel cell applications. The intended catalyst is a composite material composed of sulfur chains encapsulated in narrow diameter single-walled carbon nanotubes (S@SWNTs). S@SWNTs were successfully synthesized through sulfur vapor infusion method, and validated with Raman spectroscopy. However, the electrochemical analysis on the ORR catalytic activity of S@SWNTs indicated that it had low ORR catalytic activity. Our theoretical study based on density functional theory (DFT) revealed that the poor oxygen adsorption (low binding energy) on the surface of S@SWNTs was the bottleneck of the entire catalytic reaction. The focus of the project was subsequently pivoted to the development of a new non-noble metal ORR catalyst that could provide durability in acidic electrolyte. The hypothesis was to encapsulate small iron (Fe) clusters in SWNTs (Fe@SWNTs) can provide ORR electro-catalytic activity and long durability in acidic environment. DFT-based computational studies were carried out to explore the feasibility of the Fe@SWNTs catalyst. The theoretical study indicated that Fe@SWNTs indeed could catalyze the ORR with lower theoretical overpotential than platinum (Pt). However, its weaker bonding energy with oxygen was the bottleneck of the overall reaction. On the other hand, Fe clusters (composed of 7 Fe atoms) encapsulated in nitrogen-doped SWNTs (Fe 7 @N 4 WSNTs) showed proper oxygen adsorption by the Fe cluster and low theoretical overpotential of ORR. Comparing to the Fe single atom catalyst on N-doped SWNTs (Fe-N 4 SWNTs), which is one the best non-noble metal ORR catalysts reported in the literature, the Fe 7 @N 4 WSNTs showed lower overpotential and better resistance to acidic environment. Fe encapsulated N-doped SWNTs were synthesized with ferrocene as the Fe precursors through vapor infusion method, and experimental validate is underway. This study theoretically demonstrated the feasibility of a new type of non-noble metal electro-catalyst for ORR that could have high catalytic activity and long durability.

08 HYDROGEN↗
NASA NTRS1975

Fabrication and evaluation of polymeric early-warning fire-alarm devices

The electrical resistivities were investigated of some polymers known to be enhanced by the presence of certain gases. This was done to make a device capable of providing early warning to fire through its response with the gases produced in the early phases of combustion. Eight polymers were investigated: poly(phenyl acetylene), poly(p-aminophenyl acetylene), poly(p-nitrophenyl acetylene), poly(p-formamidophenyl acetylene), poly(ethynyl ferrocene), poly(ethynyl carborane), poly(ethynyl pyridine), and the polymer made from 1,2,3,6 tetramethyl pyridazine. A total of 40 usable thin-film sandwich devices and a total of 70 usable interdigitated-electrode lock-and-key devices were fabricated. The sandwich devices were used for measurements of contact linearity, polymer conductivity, and polymer dielectric constant. The lock-and-key devices were used to determine the response of the polymers to a spectrum of gases that included ammonia, carbon nonoxide, carbon dioxide, sulfur dioxide, ethylene, acrolein, water vapor, and normal laboratory air. Strongest responses were to water vapor, ammonia, and acrolein, and depending on the polymer, weaker responses to carbon dioxide, sulfur dioxide, and carbon monoxide were observed. A quantitative theory of device operation, capable of accounting for observed device leakage current and sensitivity, was developed. A prototype detection/alarm system was designed and built for use in demonstrating sensor performance.

Senturia, S. D.↗
NASA NTRS1979

Survey of inorganic polymers

A literature search was carried out in order to identify inorganic, metallo-organic, and hybrid inorganic-organic polymers that could serve as potential matrix resins for advanced composites. The five most promising candidates were critically reviewed and recommendations were made for the achievement of their potential in terms of performance and cost. These generic polymer classes comprise: (1) Poly(arylsil sesquioxanes); (2) Poly(silyl arylene siloxanes); (3) Poly(silarylenes); (4) Poly(silicon-linked ferrocenes); and (5) Poly(organo phosphazenes). No single candidate currently possesses the necessary combination of physicomechanical properties, thermal stability, processability, and favorable economics. The first three classes exhibit the best thermal performance. On the other hand, poly (organo phosphazenes), the most extensively studied polymer class, exhibit the best combination of structure-property control, processability, and favorable economics.

Gerber, A. H.↗
NASA NTRS1991

Analysis of redox additive-based overcharge protection for rechargeable lithium batteries

The overcharge condition in secondary lithium batteries employing redox additives for overcharge protection, has been theoretically analyzed in terms of a finite linear diffusion model. The analysis leads to expressions relating the steady-state overcharge current density and cell voltage to the concentration, diffusion coefficient, standard reduction potential of the redox couple, and interelectrode distance. The model permits the estimation of the maximum permissible overcharge rate for any chosen set of system conditions. Digital simulation of the overcharge experiment leads to numerical representation of the potential transients, and estimate of the influence of diffusion coefficient and interelectrode distance on the transient attainment of the steady state during overcharge. The model has been experimentally verified using 1,1-prime-dimethyl ferrocene as a redox additive. The analysis of the experimental results in terms of the theory allows the calculation of the diffusion coefficient and the formal potential of the redox couple. The model and the theoretical results may be exploited in the design and optimization of overcharge protection by the redox additive approach.

Narayanan, S. R.↗
NASA NTRS2001

A Controlled Arc Welding and Separation Processes for Carbon Nanotubes

Stage 1 for the Carbon Nanotube Project has been completed. This videograph presents the proposal for Stage 2. The goals of this stage are to: (1) produce CNTs under different conditions such as cooling temperature, voltage, current, cathode and anode sizes; (2) use ferrocene to make longer CNTs; (3) characterize CNTs by spectroscopic methods; (4) develop applications of CNTs, i.e., batteries, composites, wires, etc.; and (5) complete the patent application.

Benavides, Jeannette↗
NASA NTRS2003

In General, the Total Voltammetric Current from a Mixture of Redox-Active Substances will Not be the Sum of the Currents that Each Substance would Produce Independently at the Same Concentration as in the Mixture

At the potential range where both decamethylferrocene (dMeFc) and ferrocene (Fc) are oxidized with rates controlled by linear diffusion, electrogenerated Fc(+) radicals diffusing outwards from the electrode react quantitatively (K23 C=5.8 x 10(exp 8) with dMeFc diffusing towards the electrode and produce Fc and dMeFc. That reaction replaces dMeFc with Fc, whose diffusion coefficient is higher than that of dMeFc(+), and the total mass-transfer limited current from the mixture is increased by approximately 10%. Analogous observations are made when mass-transfer is controlled by convective-diffusion as in RDE voltammetry. Similar results have been obtained with another, and for all practical purposes randomly selected pair of redox-active substances, [Co(bipy)3](2+) and N - methylphenothiazine (MePTZ); reaction of MePTZ(+) with [Co(bipy)3](2+) replaces the latter with MePTZ, which diffuses faster and the current increases by approximately 20%. The experimental voltammograms have been simulated numerically and the role of (a) the rate constant of the homogeneous reaction; (b) the relative concentrations; and, (c) the diffusion coefficients of all species involved have been studied in detail. Importantly, it was also identified that within any given redox system the dependence of the mass-transfer limited current on the bulk concentrations of the redox-active species is expected to be non-linear. These findings are discussed in terms of their electroanalytical implications.

Leventis, Nicholas↗
NASA NTRS2003

Carbon Nanotube Nanoelectrode Array as an Electronic Chip for Ultrasensitive Label-free DNA Detection

A reliable nanoelectrode array based on vertically aligned multi-walled carbon nanotubes (MWNTs) embedded in SiO2 is used for ultrasensitive DNA detection. Characteristic nanoelectrode behavior is observed using low-density MWNT arrays for measuring both bulk and surface immobilized redox species such as K4Fe(CN)6 and ferrocene derivatives. The open-end of MWNTs are found to present similar properties as graphite edge-plane electrodes with wide potential window, flexible chemical functionalities, and good biocompatibility. BRCA1 related oligonucleotide probes with 18 bp are selectively functionalized at the open ends of the nanotube array and specifically hybridized with oligonucleotide targets incorporated with a polyG tag. The guanine groups are employed as the signal moieties in the electrochemical measurements. R(bpy)(sup 2+, sub 3) mediator is used to further amplify the guanine oxidation signal. The hybridization of sub-attomoles of DNA targets is detected electrochemically by combining the MWNT nanoelectrode array with the R(bpy)(sup 2+, sub 3) amplification mechanism. This technique was employed for direct electrochemical detection of label-free PCR amplicon from a healthy donor through specific hybridization with the BRCA1 probe. The detection limit is estimated to be less than 1000 DNA molecules since abundant guanine bases in the PCR amplicon provides a large signal. This system provides a general platform for rapid molecular diagnostics in applications requiring ultrahigh sensitivity, high-degree of miniaturization, and simple sample preparation, and low-cost operation.

Li, Jun↗
NASA NTRS2004

Non-Additive Voltametric Currents From a Mixture of Two, Three and Four Redox-Active Compounds and Electroanalytical Implications

We have published recently the effect of dissimilar diffusion coefficients on the size of the voltammetric waves from a mixture of two redox-active compounds. Similarly, at the potential range where three redox-active species, decamethylferrocene (dMeFc), ferrocene (Fc) and N-methylphenothiazine (MePTZ), are oxidized simultaneously with rates controlled by linear diffusion, electrogenerated radicals diffusing outwards from the electrode react with the original species diffusing towards the electrode from the bulk; thus, Fc(+) reacts with dMeFc producing Fc and dMeFc(+), while MePTZ(+) reacts both with dMeFc producing MePTZ and dMeFc(+), and with Fc producing MePTZ and Fc(+). These reactions replace dMeFc with Fc at the second plateau, and both dMeFc and Fc with MePTZ at the third plateau. Since the diffusion coefficients of the three species are not equal, the mass-transfer limited currents of the second and the third oxidation wave plateaus change by approx. 10%. Numerical simulations of the experimental voltamograms support this mechanism. Similar results were also obtained for a mixture of four redoxactive compounds. The implications of this non-additive nature of currents on: (a) the use of internal voltammetric standards for quantitative analysis of a mixture of redox-active compounds; and, (b) the half wave potentials (E1/2) of the 2nd, 3rd and 4th waves for qualitative analysis, will be discussed.

Dass, Amala↗