NSLS-II Storage Ring Injection Using a Pair on Nonlinear Injection Kickers
Introduction In a previous technical note, the author discussed the possibility of using a Nonlinear Injection Kicker in the cell 1 straight of the NSLS-II. The purpose of this kicker was to design an injection scheme which would not require the present 4 injection dipole kickers so as to minimize the disturbance to the stored beam. The conclusion of the tech note was that it should be possible to design such a system, but that certain beam studies were required to validate the simulations, especially as the beam travels near the physical aperture of the ring and outside of the good field region of the magnets. After that note, it occurred to the author that a perhaps a more robust solution could be found using a similarly designed pair of kickers. The idea is the following: storage ring injection kickers 3 and 4 would be replaced with a pair of nonlinear kickers of a similar design as in the previous tech note. Injection kickers 1 and 2 would not be utilized. The nonlinear kickers would have the field maximum at the location of the injected beam at each kicker. Then as far as the injected beam is concerned, injection would be much like the present injection scheme. As the nonlinear kickers have no field on the stored beam axis, the disturbance to the stored beam would be minimal. In this technical note, we describe this new injection scheme. We show that it is a robust design, requires fewer modifications to the ring and transport line, and provides similar injection performance as the present system without the stored beam disturbance.