Search NASA⌕ Search

SEARCH · Search NASA

Results for “Line width roughness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

A deep H-alpha image of faint Balmer-line filaments in the northeast Cygnus Loop supernova remnant

A deep H-alpha image of a field outside the optically bright northeast limb of the Cygnus Loop supernova remnant is presented. Two filaments which are just visible on the red POSS print form part of two long and unbroken lines of filaments which generally bound a region of diffuse emission and fainter filaments. However, the diffuse emission extends out to a newly detected line of extremely faint filaments 3 arcmin to the northeast. The brightest filaments are resolved into multiple components with widths less than 2 arcsec. Comparison with the POSS print leads to a rough estimate of the proper motion of 6 arcsec per century, although temporal variations in the relative brightnesses of the components of a filament could confuse attempts to more accurately measure the true proper motion. The morphology of the emission strongly suggests that it arises in a single large sheet. No direct evidence is found favoring the existence of the dense cloud cores which have been hypothesized as a way of evaporatively enhancing the X-ray emissivity and producing forbidden line emission in the filaments.

Hester, J. J.↗

The largest molecular cloud complexes in the first galactic quadrant

The Columbia CO survey of the first Galactic quadrant was used to determine the locations and physical properties of the largest molecular complexes in the inner Galaxy. Within the range of the survey (l = 12-60 deg), 26 complexes were detected with masses greater than 5 x 10 to the 5th solar masses, and roughly several hundred such complexes are deduced to exist throughout the Galaxy within the solar circle. These complexes are the parent objects of much of the Population I in the Galaxy. Distances to most of the complexes were determined kinematically, the distance ambiguity being resolved with the aid of associated H II regions, OB associations, masers, and other early Population I objects. The largest complexes are good tracers of spiral structure, the Sagittarius arm in particular being delineated with unprecedented clarity. A total of 17 large complexes are distributed rather uniformly along a 15 kpc stretch of the arm with a spacing comparable to that of the strings of regularly spaced H Ii regions observed in external galaxies. Power-law relations exist between the line widths and sizes of the complexes and between their densities and sizes. The forms of these relations are in good agreement with those found previously and are extended by roughly an order of magnitude in cloud mass.

Dame, T. M.↗

Evidence for Doppler-Shifted Iron Emission Lines in Black Hole Candidate 4U 1630-47

We report the first detection of a pair of correlated the X-ray spectrum of black hole candidate 4U 1630-47 outburst, based on Rossi X-Ray Timing Explorer (RXTE) emission lines in during its 1996 observations of the source. At the peak plateau of the outburst, the emission lines are detected, centered mostly at approx. 5.7 and approx. 7.7 keV, respectively, while the line energies exhibit random variability approx. 5%. Interestingly, the lines move in a concerted manner to keep their separation roughly constant. The lines also vary greatly in strength, but with the lower energy line always much stronger than the higher energy one. The measured equivalent width ranges from approx. 50 to approx. 270 eV for the former, and from insignificant detection to approx. 140 eV for the latter; the two are reasonably correlated. The correlation between the lines implies a causal connection; perhaps they share a common origin. Both lines may arise from a single K & alpha; line of highly ionized iron that is Doppler shifted either in a Keplerian accretion disk or in a bipolar outflow or even both. In both scenarios, a change in the line energy might simply reflect a change in the ionization state of line-emitting matter. We discuss the implication of the results and also raise some questions about such interpretations.

Cui, Wei↗

Velocity dispersions of knots in the Cygnus Loop and IC 443

Very high resolution spectroscopy of optical emission lines indicates that the velocity dispersions of knots in Cygnus Loop and IC 443 filaments result primarily from turbulence within the emitting regions. Line-of-sight velocity dispersions (half-widths at half-maximum) for the observed knots are on the order of 10-30 km/s, including associated thermal velocity dispersions of roughly 15 km/s for hydrogen, 6 km/s for oxygen, and 4 km/s for nitrogen. The knots themselves move randomly relative to each other with speeds of 10-30 km/s. Occasionally, diffuse components of the filaments are observed. These diffuse components have velocity dispersions between 60 and 85 km/s, but the relative contributions of turbulent and thermal motion to the dispersions are unkown.

Shull, P., Jr.↗

HEAO 1 identification of the X-ray emitting poor cluster of galaxies, AWM 7

The X-ray source 2A 0251 + 413 is identified with the AWM 7 group of galaxies. The source is extended, with a FWHM of roughly 9 arcmin if an isothermal sphere profile is assumed. The spectrum is best fitted by thermal bremsstrahlung at 4.0 + or - 0.5 keV, with a significant Fe line emission of equivalent width 0.63 keV centered at 6.6 keV. This temperature is consistent with a measured dispersion velocity of 600 km/s of the central galaxies.

Schwartz, D. A.↗

On the theory of silicon spectra in O and B stars

Results of a previous calculation of a grid of predicted line profiles for 36 multiplets of Si II, III, and IV over a range of model atmospheres corresponding roughly to B0-B5 in spectral type and III-IV in luminosity class are analyzed and applied to observed spectra. The overall properties of the grid of Si line equivalent widths are reviewed, the diagnostic capability of this grid is discussed, and some results are presented for the parameters of 11 B stars derived from observed Si lines. The general fit of the predictions to the observations is evaluated, and test calculations are performed to examine the effect of varying a number of important parameters. Some systematic trends in the computational results are noted which can be expressed as phenomenological 'laws'. Special attention is given to problems arising from non-LTE effects as well as to the self-consistency of analytical results obtained from unblanketed models. It is found that the Si line calculations yield good agreement in two tests for main-sequence stars between B0 and B2, but both tests give somewhat negative results for spectral types later than B2.

Kamp, L. W.↗

Monitoring the Intrinsic Absorption Complex Toward RXJ123.8+0115

The main focus of this study was changed after it became clear that the object to be observed by the Far Ultraviolet Spectroscopic Explorer (FUSE) could not be observed because of spacecraft attitude control system limitations. Therefore, we replaced the prime object for the program (RXJ1230.8+0115) with a secondary object (H1821+643) and began an analysis of a similar quasar spectrum for comparison with the extant RXJ1230.8+0115 spectrum obtained previously by FUSE. Using high-resolution spectra of the radio-quiet, X-ray bright quasar HE0226-4110 obtained with the Hubble Space Telescope (HST) and FUSE, we have examined the remarkable associated absorption line system. The redshift of the quasar is roughly 0.5 so the FUSE+HST spectra cover the rest-frame wavelength in the extreme ultraviolet range 610-1 160A. In this range, we detect transitions from a wide range of ionization species, including the H I Lyman series, Ne VIII, and, for the first time at this resolution, four adjacent stages of oxygen O III-VI. The high quality of these spectra allow us to disentangle the structure of the gas using the complex kinematics to guide the assessments of the multi-component and multi-phase nature of the system. The kinematics of the absorber indicate that all the H I, C 111, and 0 III reside in a single component, while higher ionization species largely arise in a separate, more kinematically complex structure. An analysis of a ground-based spectrum of the quasar covering the H-beta and [0 III] 5007 emission lines reveal excellent agreement in redshift between the 0 III absorption and emission. Thus, for the first time, we are able to use absorption line diagnostics to place interesting constraints on the location and structure of the narrow emission line region around a quasar. In addition, we detect a narrow absorption line that is only seen O VI and lies roughly 50 km/s redward of the narrow emission line component. Absorption from 0 V, and Ne VIII is also detected at this velocity, but as part of broader, more redshifted, component. The line width of this narrow component imply a maximum temperature that is too small to produce O VI through collisional process, suggesting instead that photoionization from the quasar is the dominant ionization mechanism. The photoionization constraints imply that O VII should be the dominant ionization stage in the component.

Sembach, Kenneth↗

Experimental Investigation of Average Heat-Transfer and Friction Coefficients for Air Flowing in Circular Tubes Having Square-Thread-Type Roughness

An investigation of forced-convection heat transfer and associated pressure drops was conducted with air flowing through electrically heated Inconel tubes having various degrees of square-thread-type roughness, an inside diameter of 1/2 inch, and a length of 24 inches. were obtained for tubes having conventional roughness ratios (height of thread/radius of tube) of 0 (smooth tube), 0.016, 0.025, and 0.037 over ranges of bulk Reynolds numbers up to 350,000, average inside-tube-wall temperatures up to 1950deg R, and heat-flux densities up to 115,000 Btu per hour per square foot. Data The experimental data showed that both heat transfer and friction increased with increase in surface roughness, becoming more pronounced with increase in Reynolds number; for a given roughness, both heat transfer and friction were also influenced by the tube wall-to-bulk temperature ratio. Good correlation of the heat-transfer data for all the tubes investigated was obtained by use of a modification of the conventional Nusselt correlation parameters wherein the mass velocity in the Reynolds number was replaced by the product of air density evaluated at the average film temperature and the so-called friction velocity; in addition, the physical properties of air were evaluated at the average film temperature. The isothermal friction data for the rough tubes, when plotted in the conventional manner, resulted in curves similar to those obtained by other investigators; that is, the curve for a given roughness breaks away from the Blasius line (representing turbulent flow in smooth tubes) at some value of Reynolds number, which decreases with increase in surface roughness, and then becomes a horizontal line (friction coefficient independent of Reynolds number). A comparison of the friction data for the rough tubes used herein indicated that the conventional roughness ratio is not an adequate measure of relative roughness for tubes having a square-thread-type element. The present data, as well as those of other investigators, were used to isolate the influence of ratios of thread height to width, thread spacing to width, and the conventional roughness ratio on the friction coefficient. A fair correlation of the friction data was obtained for each tube with heat addition when the friction coefficient and Reynolds number were defined on the basis of film properties; however, the data for each tube retained the curve characteristic of that particular roughness. The friction data for all the rough tubes could be represented by a single line for the complete turbulence region by incorporating a roughness parameter in the film correlation. No correlation was obtained for the region of incomplete turbulence.

Sams, E. W.↗

Velocity dispersions of knots in Vela X and Puppis A

Very high resolution spectroscopy of optical emission lines indicates that the velocity dispersions of knots in Vela X and Puppis A result primarily from turbulence within the emitting regions. Line-of-sight velocity dispersions (half-widths at half-maximum) for the observed knots in both remnants are about 20-30 km/s. In Vela X, these include thermal velocity dispersions of roughly 16 km/s for hydrogen and 4 km/s for nitrogen. The knots themselves move randomly relative to each other, with speeds up to 30 km/s in Vela X and between 30-80 km/s in Puppis A. Occasionally, diffuse components of the filaments are observed in Puppis A. These diffuse components have velocity dispersions between 55 and 80 km/s, but the relative contributions of turbulent and thermal motions to the dispersions are unknown. The results are compared with theory and previous observations. Direct photographs may be able to show if the forbidden O III knots are less spatially dispersed than the forbidden N II, forbidden S II, forbidden O II, and H I knots.

Shull, P., Jr.↗

Field-dependent linewidths and photoluminescence energies in GaAs-AlGaAs multiquantum well modulators

Photoluminescence linewidths and transition energies have been measured in GaAs-AlGaAs multiple quantum wells with large (equal to or greater than 160 A) barrier widths as a function of applied transverse electric field. The experimental data agree well with values calculated by using a recently developed variational technique. It is apparent that heterointerface roughness is the dominant line broadening mechanism. The emission intensity decreases rapidly with field, principally due to carrier tunneling at high fields. At 80 kV/cm a shift of 20 meV in the emission energy is observed.

Juang, F.-Y.↗

31 Cygni: The B star and the wind

I have followed photospheric and wind absorptions in International Ultraviolet Explorer (IUE) spectra over much of the orbit of this K4 Ib+B3-4 binary system, using interstellar lines to transform all the velocities to a scale with the interstellar medium at -10.1 km/s. Results are as follows: Interstellar Fe II lines give NL (Fe(+)) = 1-2 x 10(exp 14)/sq cm with a Doppler width of 7 km/s; depletions of heavy elements along the line of sight to this star are similar to those for other stars with low interstellar densities. Photospheric lines yield a new velocity amplitude for the B star, K(sub B) = 23.2 +/- 1.0 km/s, which gives the mass ratio M(sub K)/M(sub B) = 1.66 and masses M(sub B) = 7.1 solar mass and M(sub K) = 11.7 solar mass. Existing photometry gives R(sub K) = 197 solar radius, R(sub B) = 5.2 solar radius, and i = 87.19 deg. Breadths of photospheric lines imply the rotational velocity of the B star is V sin i = 70-80 km/s. Most of the wind features are formed in a shell much larger than the binary system for which the terminal velocity seems to be 73 +/- 2 km/s, but it may be as high as approximately 90 km/s. The Doppler width (approximately 13 km/s) of Fe II shell lines likely results from acceleration of the wind, although it could reflect orbital motion of the K supergiant. Shell lines of Mg II and Si II are roughly consistent with Fe II, although their strengths are phase dependent, while S II requires a somewhat thicker shell in S(+) than in Fe(+) with a greater spread in expansion velocity. Shell lines of O I and N I are abnormally weak, if detected at all, and this implies that hydrogen is ionized throughout much of the wind. Lines of highly ionized species (C IV, Si Iv, and N V) appear sporadically in the spectrum and have inverse P Cyg profiles implying collapse (probably of an accretion disk) onto the B star. They do not seem to be isolated at particular phases as might be expected for formation in a conical shock front around an accretion column. I argue that the wind is roughly isotopic and is accelerated slowly, in agreement with existing ideas about winds.

Eaton, Joel A.↗

Spectral variability of Cyg X-3

The 1.7-40 keV spectra of Cyg X-3 obtained about a year apart, using the same rocket payload, show large spectral differences. The two observations suggest that while the luminosity of this source remains roughly the same, its spectrum can vary from a featureless blackbody distribution to a flat spectrum which includes strong iron line emission at approximately 6.7 keV. The flux in the line corresponds to an equivalent continuum width of 1.2 keV.

Serlemitsos, P. J.↗

The 1088 A feature toward reddened stars

An analysis of the interstellar feature near 1088 A in spectra obtained with the Copernicus satellite suggests that neutral chlorine is the absorber. The mean wavelength, as determined from 15 lines of sight, of 1088.052 + or - 0.023 A compares favorably with the chlorine line at 1088.062 A. A strong correlation with Cl I 1347 A indicates an oscillator strength for 1088 A of 0.04. Above a threshold at N(H2) of roughly 10 to the 19th/sq cm, the equivalent width of 1088 A varies approximately with N(H2). The variation with H2 is similar to the variation of Na I and C I with H2.

Federman, S. R.↗

An Experimental Study of Fretting of Gear Teeth

Experiments were conducted to study fretting of gears. The gears were made from case-carburized AISI 9310 alloy to match the material of a flight actuator gearbox of interest. The objective of the testing was to produce damage representative of that observed on flight hardware. The following correlations and observations were noted. The amplitude of dithering motion very strongly influenced the type and magnitude of damage. Sliding amounts on the order of 30% of the width of the line contact were judged to most readily produce fretting damage. There was observed an incubation period on the order of tens-of-thousands of cycles, and the incubation period was influenced by surface roughness, torque, and the motion extent. Fretting damage could be produced for any of the torques tested, and the severity of damage increased slightly with torque. Gear teeth having surface roughness of 0.7-0.8 micrometer were somewhat more resistant to fretting than were smoother surfaces.

Krantz, Timothy L.↗

IUE observations of cool stars - Alpha Aurigae, HR1099, Lambda Andromedae, and Epsilon Eridani

Initial IUE observations of four cool stars are reported. Observed fluxes and surface fluxes are given for several UV emission lines in the spectral range 1175-2000 A, obtained at low and high dispersion with the short-wavelength spectrograph and camera. These lines are formed in the outer atmospheres of these stars, in regions presumably analogous to the solar chromosphere and transition region. The surface fluxes in the lines increase along the sequence: quiet sun, Epsilon Eri, Lambda And, Alpha Aur, and HR1099. The 2.8-d RS CVn-type binary HR1099, observed on 1 March 1978 near the end of a major flaring episode, has line surface fluxes roughly 100 times that of the quiet sun, similar to those seen in solar flares. Line profiles and flux ratios in multiplets for Capella are presented, and comments given on the opacity of the lines and on a tendency of line width to increase with temperature of formation.

Linsky, J. L.↗

Turbulent broadening of electron heat-flux width in electromagnetic gyrokinetic simulations of a helical scrape-off layer model

Here, we demonstrate that cross field transport in the scrape-off layer (SOL) can be moderately increased by electromagnetic effects in high-beta regimes, resulting in broadening of the electron heat-flux width on the endplates. This conclusion is taken from full- f electromagnetic gyrokinetic simulations of a helical SOL model that roughly approximates the SOL of the National Spherical Torus Experiment. The simulations have been performed with the Gkeyll code, which recently became the first code to demonstrate the capability to simulate electromagnetic gyrokinetic turbulence on open magnetic field lines with sheath boundary conditions. We scan the source rate and thus β, so that the normalized pressure gradient (the MHD ballooning parameter $α ∝ ∂β/∂r ∝ β/Lρ$) is scanned over an experimentally relevant range, α = 0.3 - 1.5. While there is little change in the pressure gradient scale length L p near the midplane as beta is increased, a 10% increase in cross field transport near the midplane results in an increase in the electron heat-flux width λ q and a 25% reduction of the peak electron heat flux to the endplates.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Temperature and abundances in the Jovian auroral stratosphere. 2: Ethylene as a probe of the microbar region

Individual emission lines of ethylene (C2H4) near 10.5 micron were measured from the equatorial and north polar regions of Jupiter. Observations were made at a spectral resolution of 0.00083/cm using infrared heterodyne spectroscopy at the NASA Infrared Telescope Facility of Mauna Kea, Hawaii. The line shape information possible with this resolving power permitted the retrieval of quiescent ethylene abundances and the investigation of abundance and thermal structure variability in the polar auroral region. A rough distribution of the north polar emission as a function of longitude was obtained with an instantaneous field of view (full width at half maximum) of approximately 1 arc sec on the planet. The greatest C2H4 emission was observed near the nominal north polar methane hot spot (60 deg N, 180 deg longitude, System III, 1965). It was found to be confined to less than 10 deg longitude on the planet. Using a Voyager-derived thermal profile, retrieved ethylene mole fractions for equatorial and north polar quiescent (non-hot spot) regions were consistent with results from existing photochemical models. At the hot spot an 18-fold increase in abundance was required near the 10-microbar level to reproduce the data. Alternatively varying the stratospheric thermal profile, a 67-137 K increase in temperature was required at the approximately 10-microbar level to satisfy the observed emission, if the C2H4 mole fraction is fixed to the quiescent value. These results provide the first direct probe of the upper stratosphere of Jupiter and give upper limits to the temperature increase near the source of the north polar thermal infrared aurora. Combined with results from similar measurements of auroral ethane emission (Livengood et al., this issue) probing the 1-mbar region, altitude information on the thermal structure can be obtained for the first time. The ethylene line emission region extends to the few microbar pressure level and may overlap the region where the H2 ultraviolet aurora is formed; thus it can be used as a probe of the coupling between the ultraviolet and thermal infrared phenomena.

Kostiuk, Theodor↗

Spectral variability of Cygnus X-3

Spectra of Cyg X-3 from 1.7 to 40 keV, obtained about a year apart using the same rocket payload, show large spectral differences. The two observations suggest that while the luminosity of this source remains roughly the same, its spectrum can vary from a featureless blackbody distribution to a flat spectrum which includes strong iron line emission at approximately 6.7 keV. The flux in the line is 0.018 (plus or minus 0.004) photons per sq cm/sec, corresponding to an equivalent continuum width of 1.2 keV.

Serlemitsos, P. J.↗