SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A series of multicyclic hydrocarbons were synthesized in high yield and under mild conditions from 2,5-hexanedione, cyclohexanone and cyclopentanone, on a scale of 200 g.
A synthetic route to gem-dimethyl-substituted bacteriochlorins—models of native bacteriochlorophylls—relies on the formation of a dihydrodipyrrin precursor via a series of established reactions: van Leusen pyrrole formation, Vilsmeier formylation, Henry reaction, borohydride reduction, Michael addition, and McMurry–Melton pyrroline formation. The latter is the least known of the series. Here, the McMurry–Melton reaction of a 2-(6-oxo-2-nitrohexyl)pyrrole in the presence of TiCl3 and an ammonium acetate buffer formed the expected Δ1-pyrroline, as well as an unexpected polar, cyclic byproduct (a 5,6-dihydro-4H-1,2-oxazin-6-ol), each attached to the 2-methylpyrrole unit. Both species were characterized by single-crystal X-ray diffraction. The McMurry–Melton reaction is a type of intercepted Nef reaction (the transformation of a nitroalkyl motif into a carbonyl group), where both the Δ1-pyrroline and the dihydrooxazine derive from the reaction of the nitrogen derived from the nitro group upon complete or partial reductive deoxygenation, respectively, with the γ-keto group. The report also considers competing Nef and McMurry–Melton reactions, the nature of available TiCl3 reagents, and the use of ammonium acetate for buffering the TiCl3/HCl reagent.
A quinone derivative with a high redox potential that does not undergo Michael addition or proto-desulfonation. This molecule addresses the key issues faced with the positive side material of an aqueous all-organic flow battery. This new molecule is 2,5-dihydroxy-4,6-dimethylbenzene-1,3-disulfonic acid (or the disulfonate salt thereof). This quinone derivative offers good solubility, electrochemical reversibility, and robustness to charge/discharge cycling. Quinones with reduced crossover are also provided.
Eleven conjoined coumarins possessing a chromeno[3,4-c]chromene-6,7-dione skeleton have been synthesized via the reaction of electron-rich phenols with esters of coumarin-3-carboxylic acids, catalyzed by either Lewis acids or 4-dimethylaminopyridine. Furthermore, Michael-type addition to angular benzo[f]coumarins is possible, leading to conjugated helical systems. Arrangement of the electron-donating amino groups at diverse positions on this heterocyclic skeleton makes it possible to obtain π-expanded coumarins with emission either sensitive to, or entirely independent of, solvent polarity with large Stokes shifts. Computational studies have provided a rationale for moderate solvatochromic effects unveiling the lack of collinearity of the dipole moments in the ground and excited states. Depending on the functional groups present, the obtained dyes are highly polarized with dipole moments of ~14 D in the ground state and ~20–25 D in the excited state. Strong emission in nonpolar solvents, in spite of the inclusion of a NO 2 group, is rationalized by the fact that the intramolecular charge transfer introduced into these molecules is strong enough to suppress intersystem crossing yet weak enough to prevent the formation of dark twisted intramolecular charge transfer states. Photochemical transformation of the dye possessing a chromeno[3,4-c]pyridine-4,5-dione scaffold led to the formation of a spirocyclic benzo[g]coumarin.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
The notion of a “fission battery” conveys a vision focused on realizing very simple “plug-and-play” nuclear systems that can be integrated into a variety of applications requiring affordable, reliable energy in the form of electricity and/or heat and function without operations and maintenance staff. Fission batteries require lightweight structural materials to increase their mobility, and the lightweight materials must demonstrate structural resilience under various conditions. The objective of this work is to develop lattice structured lightweight structural material featuring a good combination of mechanical properties using advanced modeling and simulation together with an advanced additive manufacturing technique such as laser powder bed fusion. The preliminary results show that different lattice structures and types can be successfully meshed using nTopology software, and the lattice structure data can be successfully transformed to Multiphysics Object-Oriented Simulation (MOOSE) Environment input. Finite Element Analysis (FEA) displays that, at macro/engineering scale simulation, the weight saving design has an obvious effect on tensile behavior such as effective elastic modulus and yield stress. The novel approaches of this work are (1) development of lattice structures for improved mechanical properties using advanced simulation and modeling techniques; and (2) model predictions of the mechanical properties (e.g., strength and stress distribution) of macroscopic materials in order to preliminarily select a lattice structure for additive manufacturing.
This research demonstrated the concept of carbide precipitation-strengthened refractory high entropy alloys (RHEA). The advantage of a precipitation strengthened alloy is all phases are in thermodynamic equilibrium promoting microstructural stability, and consequently retention of properties at elevated temperatures. Additionally, as with any precipitation strengthened – or age hardened alloy, components can be heat-treated after manufacturing to manipulate the microstructure and optimize properties for performance. This is an advantage of the precipitation strengthened alloys over composites and ceramics materials, where the microstructure and properties are essentially fixed upon the initial materials manufacturing stage. High throughput (HT), multi-scale computer modeling was used to identifying novel RHEA compositions with desired characteristics needed for precipitation strengthening. The results showed that carbides precipitated and consequently, the strength of the alloys (measured in compression) increased after heat-treatment, which is the desired effect. The project also demonstrated the feasibility of producing articles from RHEA by additive manufacturing (AM).
A series of catalyst-free, room temperature dynamic bonds derived from a reversible thia-Michael reaction are utilized to access mechanically robust dynamic covalent network films. The equilibrium of the thiol addition to benzalcyanoacetate-based Michael-acceptors can be directly tuned by controlling the electron-donating/withdrawing nature of the Michael-acceptor. By modulating the composition of different Michael-acceptors in a dynamic covalent network, a wide range of mechanical properties and thermal responses can be realized. Additionally, the reported systems phase-separate in a process, coined dynamic reaction-induced phase separation (DRIPS), that yields reconfigurable phase morphologies and reprogrammable shape-memory behaviour as highlighted by the heat-induced folding of a predetermined structure.
Industry 4.0 represents the next evolution of industrial technology. Some of the key characteristics of Industry 4.0 include augmented reality and additive manufacturing. In support of this evolution, researchers at Oak Ridge National Lab created a prototype augmented reality (AR) interface, ASMARI. This prototype acts as a common interface for both industrial additive and subtractive machines. Additionally, in the changing industrial workspace of Industry 4.0, the role of humans will also change. This interface focuses on increasing productivity and situational awareness, while providing new interaction modalities for interacting with hardware. The prototype was also evaluated by multiple users who provided positive feedback on the system. Ultimately, the prototype represents a first step towards significant integration between augmented reality and additive manufacturing.
In this work the rapid alloy selection and subsequent processability via additive manufacturing of nickelbased superalloys was investigated. Rapid alloy selection protocols developed within the project produced two viable nickel-based superalloys. This phase I CRADA demonstrates a viable route for selecting new nickel-based superalloys for additive manufacturing.
In this work the rapid alloy selection and subsequent processability via additive manufacturing of nickelbased superalloys was investigated. Rapid alloy selection protocols developed within the project produced two viable nickel-based superalloys. This phase I CRADA demonstrates a viable route for selecting new nickel-based superalloys for additive manufacturing.
The Energy 101: Utilities presentation, developed for the Energy Technology Innovation Partnership Project (ETIPP), provides an overview of utilities. It covers fundamental concepts, technologies, considerations, case studies, and additional resources.
A method and system for water purification includes a particle accelerator configured to generate a particle beam and a conduit configured to be substantially in line with the particle beam wherein said electron beam is incident on a fluid flowing through the conduit. The electron beam can be oriented to be substantially head on to the direction of flow of the fluid in the conduit. A shielding assembly can be configured around the conduit. A cartridge filtering system and contaminant filtering system can be provided to remove additional contaminants.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Fission product lanthanides in metallic fuels are known to cause adverse fuel-cladding chemical interaction (FCCI). Tin (Sn) and palladium (Pd) are being explored as the potential additives to reduce or mitigate lanthanide-induced FCCI by forming stable Sn-Ln and Pd-Ln compounds. The current study is an investigation of the fuel alloys, U–4Sn, U–4Sn-4Ln, U–4Pd, and U–4Pd-4Ln (wt. %), and their diffusion behaviors with Fe. Microstructural analysis was performed using scanning electron microscopy (SEM). Further, the binary phases in the UPd and USn alloys are identified as UPd 3 and suspected U 2 Sn, where U 2 Sn is unknown in the literature. The binary phases in the UPdLn alloy are identified as PdLn and Pd-rich Pd-Ln (Pd 4 Ln 3 and Pd 3 Ln 2 ), and in the USnLn alloy is SnLn. Diffusion of Fe with these binary phases is insignificant compared to the diffusion with U. The Ln-induced FCCI can be mitigated by the additives.