Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLANING SURFACES - CHARACTERISTICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

The hemispheric reflectance of a plane water surface for atmospheric radiation

The hemispheric reflectance of a plane water surface is computed for clear sky and low overcast sky emission spectra. The gross features of clear sky emission are described by a model that has a deficiency of emission in the 8- to 13-micron band. The deficiency is most pronounced in the zenith but disappears as the zenith angle approaches the horizon. The radiation from a low overcast sky is assumed to be blackbody. The computation is made using Fresnel formulas for a conducting medium. The hemispheric reflectance for clear sky radiation is found to be approximately 0.018 higher than the overcast (blackbody) value, which ranged from 0.113 to 0.107 for atmospheric temperatures ranging from 273 to 313 K, respectively.

Boudreau, R. D.↗
NASA NTRS1980

Some effects of motion and plane reflecting surfaces on the radiation from acoustic sources

The effects of translatory and rotational motion and of the proximity of ground surface on the radiation from acoustic monopole and dipole sources are discussed together with the key equations. It is shown that interference patterns are produced by reflection and absorption at a plane surface and that consequently, the far-field directivity of an acoustic source near the ground can be substantially altered from its free-field value. The kinematic effects discussed include the beaming of sound in the direction of source motion and the shifting of the observer source frequency in a directionally dependent manner. The effects are illustrated by experimental data.

Lansing, D. L.↗
NASA NTRS1933

Scale Effect of Model in Seaplane-float Investigations

For the purpose of solving all the problems involved, an investigation was made with flat, rectangular planing surfaces. The investigation of a flat, rectangular planing surface, which can be considered as the portion of a flat float bottom lying in front of the step, has the advantage that the frictional resistance can be determined directly from the test results. Normal and tangential forces act on the lower side of the planing surface towed through still water, while the upper side and the lateral edges are under constant atmospheric pressure.

Sottorf, W↗
NASA NTRS1978

The co-adsorption of copper and oxygen on a tungsten 100 plane-type surface

The coadsorption of Cu on O2 and a W 100 plane-type surface is studied by Auger electron spectroscopy, thermal desorption, low energy electron diffraction and by work function change measurements. It is shown that the presence of Cu on the surface initially decreases the sticking coefficient of O2. For longer oxygen exposures and for higher adsorption temperatures, the coverage of preadsorbed oxygen reaches values larger than those on the clean surface for the same O2 exposure. Except at the highest values and temperatures of the coverage of preadsorbed oxygen, the sticking coefficient for copper is unity and is independent of the oxygen coverage in the range studied. Coadsorption at room temperatures does not produce any long range order while coadsorption at elevated temperature leads to ordered structures. The saturation coverage of the two dimensional coadsorbate at 800 K is given by a relation. The work function is a complicated function of the coverage of preadsorbed oxygen and the coverage of preadsorbed Cu and is determined predominantly by the temperature at which oxygen is adsorbed. At high temperatures the sequence of adsorption has no influence, in contrast to the room temperature behavior.

Bauer, E.↗
NASA NTRS2018

Evaluating the Assumptions in an Empirical Jet-Surface Interaction Noise Model

A set of empirical jet-surface interaction noise models, developed for single-stream round nozzles exhausting over a simple surface in a static ambient, are evaluated for use in more realistic applications that include multi-stream nozzle systems, multi-plane surface geometries, and a flight-stream. The simple-single-stream models have several advantages when used in system-level noise studies: they are robust, they are quickly computed, and they are generally applicable to a wide range of configurations. However, these models require simplifying assumptions when applied to more complex jet exhaust systems; for example, previous work on multi-stream jets used an empirical formula to compute a single-stream equivalent jet potential core length that could be used to predict the noise using simple-single-stream jet-surface interaction models. This paper considers the effect of flight and multi-plane surfaces using a similar approach: introducing assumptions to simplify the complex system, applying the simple-single-stream models, and evaluating the uncertainty.

Jet Noise↗
NASA NTRS2018

Evaluating the Assumptions in an Empirical Jet-Surface Interaction Noise Model

A set of empirical jet-surface interaction noise models, developed for single-stream round nozzles exhausting over a simple surface in a static ambient, are evaluated for use in more realistic applications that include multi-stream nozzle systems, multi-plane surface geometries, and a flight-steam. The simple-single-stream models have several advantages when used in system-level noise studies: they are robust, they are quickly computed, and they are generally applicable to a wide range of configurations. However, these models require simplifying assumptions when applied to more complex jet exhaust systems; for example, previous work on multi-stream jets used an empirical formula to compute a single-stream equivalent jet potential core length that could be used to predict the noise using simple-single-stream jet-surface interaction models. This paper considers the effect of flight and multi-plane surfaces using a similar approach: introducing assumptions to simplify the complex system, applying the simple-single-stream models, and evaluating the uncertainty.

Jet Noise↗
NASA NTRS1990

ISOLEV - A level surface cutting plane program for fluid flow data

A computer program, ISOLEV, allows interactive visualization of CFD scalar and vector functions by means of user-specified sections of the data. The application is based on table lookups which govern both isosurface generation on hexahedral grid cells and recursive subdivision of the cells. The program supports Gouraud-shaded color maps of the data, surface-on-surface maps, and deformation surfaces of vector fields. The execution of the code for animated sweeps is improved by resorting to the cells in the database and maintaining an active set of cells to be rendered.

Kerlick, G. David↗
NASA NTRS1991

Variation of crack-opening stresses in three-dimensions - Finite thickness plate

A 3D elastic-plastic finite-element analysis is conducted to study crack-growth behavior of thin and thick center-cracked specimens under constant-amplitude loading conditions. The numerical analysis and the specimen configuration and loading are described for both the thin and thick conditions. Stabilized crack-opening stresses of interior and exterior regions are given as are the closure and opening profiles of the crack-surface plane after the tenth cycle. The effect of thickness is discussed with respect to the crack-opening stress levels and the plastic zones of the interior and exterior regions. A load-reduced-displacement technique allows the calculation of the crack-opening stresses at three locations on the crack surface plane. The constraint effect related to thickness gives a lower stabilized crack-opening stress level for the thick specimens.

Chermahini, R. G.↗
NASA NTRS1982

Viscous-shock-layer heating analysis for the shuttle windward-symmetry plane with surface finite catalytic recombination rates

The paper demonstrates the capability of a reacting, two-dimensional viscous-shock-layer solution using the equivalent axisymmetric body concept to predict heating rates on the shuttle windward centerline for a wide range of altitudes. Results indicate that the nonequilibrium effects persist through most of the STS-2 entry heating pulse down to an altitude of about 50 km. When results are compared to those of the inviscid flowfield plus boundary layer solution of Scott (1980), agreement is fair to poor for nonequilibrium calculations, although very good for equilibrium calculations. A parametric study to demonstrate the effect of uncertainties in oxygen surface recombination rate for RCG coated HRSI on heating, indicates favorable results when a wall recombination rate of 100 cm/sec is used in the temperature range 1400-900 K.

Shinn, J. L.↗
NASA NTRS1986

Parametric study of beam refraction problems across laser anemometer windows

The experimenter is often required to view flows through a window with a different index of refraction than either the medium being observed or the medium that the laser anemometer is immersed in. The refraction that occurs at the window surfaces may lead to undesirable changes in probe volume position or beam crossing angle and can lead to partial or complete beam uncrossing. This report describes the results of a parametric study of this problem using a ray tracing technique to predict these changes. The windows studied were a flat plate and a simple cyclinder. For the flat-plate study: (1) surface thickness, (2) beam crossing angle, (3) bisecting line - surface normal angle, and (4) incoming beam plane surface orientation were varied. For the cylindrical window additional parameters were also varied: (1) probe volume immersion, (2) probe volume off-radial position, and (3) probe volume position out of the R-theta plane of the lens. A number of empirical correlations were deduced to aid the interested reader in determining the movement, uncrossing, and change in crossing angle for a particular situation.

Owen, A. K.↗
NASA NTRS1986

A parametric study of the beam refraction problems across laser anemometer windows

The experimenter is often required to view flows through a window with a different index of refraction than either the medium being observed or the medium that the laser anemometer is immersed in. The refraction that occurs at the window surfaces may lead to undesirable changes in probe volume position or beam crossing angle and can lead to partial or complete beam uncrossing. This report describes the results of a parametric study of this problem using a ray tracing technique to predict these changes. The windows studied were a flat plate and a simple cylinder. For the flat-plate study: (1) surface thickness, (2) beam crossing angle, (3) bisecting line - surface normal angle, and (4) incoming beam plane surface orientation were varied. For the cylindrical window additional parameters were also varied: (1) probe volume immersion, (2) probe volume off-radial position, and (3) probe volume position out of the r-theta plane of the lens. A number of empirical correlations were deduced to aid the reader in determining the movement, uncrossing, and change in crossing angle for a particular situations.

Owen, Albert K.↗
NASA NTRS1969

Basal-plane metallography of deformed pyrolytic carbon

Cleavage technique is recommended over the normal polishing technique in preparing pyrolytic carbon for metallographic examination of basal-plane surfaces. After careful removal of torn basal-plane fragments and other cleavage debris with cellulose tape, the true structure is clearly revealed.

Adkins, J. M.↗
NASA NTRS2008

Effect of Microscopic Damage Events on Static and Ballistic Impact Strength of Triaxial Braid Composites

In previous work, the ballistic impact resistance of triaxial braided carbon/epoxy composites made with large flat tows (12k and 24k) was examined by impacting 2 X2 X0.125" composite panels with gelatin projectiles. Several high strength, intermediate modulus carbon fibers were used in combination with both untoughened and toughened matrix materials. A wide range of penetration thresholds were measured for the various fiber/matrix combinations. However, there was no clear relationship between the penetration threshold and the properties of the constituents. During some of these experiments high speed cameras were used to view the failure process, and full-field strain measurements were made to determine the strain at the onset of failure. However, these experiments provided only limited insight into the microscopic failure processes responsible for the wide range of impact resistance observed. In order to investigate potential microscopic failure processes in more detail, quasi-static tests were performed in tension, compression, and shear. Full-field strain measurement techniques were used to identify local regions of high strain resulting from microscopic failures. Microscopic failure events near the specimen surface, such as splitting of fiber bundles in surface plies, were easily identified. Subsurface damage, such as fiber fracture or fiber bundle splitting, could be identified by its effect on in-plane surface strains. Subsurface delamination could be detected as an out-of-plane deflection at the surface. Using this data, failure criteria could be established at the fiber tow level for use in analysis. An analytical formulation was developed to allow the microscopic failure criteria to be used in place of macroscopic properties as input to simulations performed using the commercial explicit finite element code, LS-DYNA. The test methods developed to investigate microscopic failure will be presented along with methods for determining local failure criteria that can be used in analysis. Results of simulations performed using LS-DYNA will be presented to illustrate the capabilities and limitations for simulating failure during quasi-static deformation and during ballistic impact of large unit cell size triaxial braid composites.

Littell, Justin D.↗