Search NASA⌕ Search

SEARCH · Search NASA

Results for “Pyrophorics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

Elastic moduli of high-density, sintered monoliths of yttrium dihydride

Yttrium dihydride has been considered as potential nuclear reactor moderator for micro-reactors operating in the thermal energy spectrum due to their ability to retain hydrogen to high temperatures while having a relatively low impact on neutron economy. Despite these advantages, it is difficult to prepare yttrium dihydride in high-density, near net-shape monoliths for moderator applications due to volume expansion upon hydriding and the pyrophoric nature of the material. In this work, high-density monoliths of yttrium dihydride were prepared by direct hydriding and using powder metallurgical methods. Resonant ultrasound spectroscopy was used to measure the elastic moduli of the sintered monoliths, while nanoindentation was used to determine the Young’s modulus and hardness of the directly-hydrided yttrium and the sintered monoliths. Single crystal elastic constants and related properties of yttrium dihydride were also determined using density functional theory (DFT) for comparison. We report mechanical properties of materials produced by both methods were observed to be consistent with the values from literature for yttrium dihydride. Due to the novelty of producing yttrium dihydride by powder metallurgy, this result indicated that the monoliths produced by powder metallurgy were of high quality. To that end, powder metallurgy is believed to be a viable method for large-scale production of yttrium dihydride monoliths for nuclear reactor moderator applications.

36 MATERIALS SCIENCE↗

EARTHQUAKE CAUSED RELEASES FROM A NUCLEAR FUEL CYCLE FACILITY

The fuel cycle facility (FCF) at the Idaho National Laboratory is a nuclear facility which must be licensed in order to operate. A safety analysis is required for a license. This paper describes the analysis of the Design Basis Accident for this facility. This analysis involves a model of the transient behavior of the FCF inert atmosphere hot cell following an earthquake initiated breach of pipes passing through the cell boundary. The hot cell is used to process spent metallic nuclear fuel. Such breaches allow the introduction of air and subsequent burning of pyrophoric metals. The model predicts the pressure, temperature, volumetric releases, cell heat transfer, metal fuel combustion, heat generation rates, radiological releases and other quantities. The results show that releases from the cell are minimal and satisfactory for safety. This analysis method should be useful in other facilities that have potential for damage from an earthquake and could eliminate the need to back fit facilities with earthquake proof boundaries or lessen the cost of new facilities.

99 GENERAL AND MISCELLANEOUS↗

Uranium corrosion characterization by handheld laser-induced breakdown spectroscopy

In this study, a commercial-off-the-shelf handheld laser-induced breakdown spectroscopy system was modified, calibrated and tested for discrimination between uranium oxide and uranium hydride when assessing uranium corrosion products. Operating parameters, system modifications, and onboard data analysis were developed to accomplish the analytical task. This work represents the first laser-induced breakdown spectroscopy analysis of bulk uranium hydride, a pyrophoric material, within an inert glovebox. Finally, the work shown here illustrates a rapid identification technique for uranium corrosion types from pure UO 2 or U 3 O 8 to pure UH 3 .

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Electronic and Geometric Contributors to Hydrogen Binding in Uranium Oxide Grain Boundaries

Hydrogen induced corrosion of uranium, which leads to the formation of toxic and pyrophoric UH 3 , raises significant safety concerns for long-term storage of nuclear materials. Previous work suggests hydrogen diffuses through the grain boundaries (GBs) of the passivating oxide layer to initiate hydriding reactions. However, the atomistic mechanisms underlying this phenomenon and the structural factors that control its initiation are not well understood. To address this knowledge gap, here we use a high-throughput density functional theory (DFT) workflow to investigate the adsorption of H and H 2 in the defective bulk UO 2 . Specifically, we have exhaustively investigated the adsorption of H (107 sites) and H 2 (26 sites) in three different coincident site lattice (CSL) GBs: Σ3, Σ5, and Σ9. Compared to the binding energies in pristine UO 2 , we observe significantly stronger hydrogen adsorption at these GB sites. Interestingly, we find that the trends in H and H 2 adsorption vary considerably across the three GB models. In particular, while a small number of sites in Σ5 and Σ9 show exothermic adsorption of H and H 2 , respectively, no such sites are found in Σ3. These results provide fundamental atomistic insights that could guide the development of future corrosion mitigation strategies for the storage of nuclear materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Elucidating the Initial Steps in α-Uranium Hydriding Using First-Principles Calculations

Hydrogen embrittlement of uranium, which arises due to the formation of a structurally weak pyrophoric hydride, poses a major safety risk in material applications. Previous experiments have shown that hydriding begins on the top or near the surface (i.e., subsurface) of α-uranium. However, the fundamental molecular-level mechanism of this process remains unknown. Here, in this work, starting from pristine α-U bulk and surfaces, we present a systematic investigation of possible mechanisms for the formation of metal hydride. Specifically, we address this problem by examining the individual steps of hydrogen embrittlement, including surface adsorption, subsurface absorption, and the interlayer diffusion of atomic hydrogen. Furthermore, by examining these processes across different facets, we highlight the importance of both (1) hydrogen monolayer coverage and (2) applied tensile strain on hydriding kinetics. Taken together, by studying previously overlooked phenomena, this study provides foundational insights into the initial steps of this overall complex process. We anticipate that this work will guide near-term future development of multiscale kinetic models for uranium hydriding and subsequently identify potential strategies to mitigate this undesired process.

36 MATERIALS SCIENCE↗

Low-Cost Approaches to III–V Semiconductor Growth for Photovoltaic Applications

III–V semiconductors form the most efficient single- and multijunction photovoltaics. Metal–organic vapor-phase epitaxy, which uses toxic and pyrophoric gas-phase precursors, is the primary commercial growth method for these materials. In order for the use of highly efficient III–V-based devices to be expanded as the demand for renewable electricity grows, a lower-cost approach to the growth of these materials is needed. This Review focuses on three deposition techniques compatible with current device architectures: hydride vapor-phase epitaxy, close-spaced vapor transport, and thin-film vapor–liquid–solid growth. Here, we consider recent advances in each technique, including the available materials space, before providing an in-depth comparison of growth technology advantages and limitations and considering the impact of modifications to the method of production on the cost of the final photovoltaics.

14 SOLAR ENERGY↗

Highly soluble alkoxide magnesium salts for rechargeable magnesium batteries

We developed a unique class of air-stable and non-pyrophoric magnesium electrolytes based on alkoxide magnesium compounds. The crystals obtained from this class of electrolytes exhibit a unique structure of tri-magnesium cluster, [Mg 3 Cl 3 (OR) 2 (THF) 6 ] + [(THF)MgCl 3 ] - . Furthermore we obtained high reversible capacities and good rate capabilities in Mg-Mo 6 S 8 batteries using these new electrolytes at both 20 and 50°C.

25 ENERGY STORAGE↗

Novel syntheses of carbazole-3,6-dicarboxylate ligands and their utilization for porous coordination cages

The molecular nature, and thus potential solubility, of coordination cages endows them with a number of advantages as compared to metal–organic frameworks and other extended network solids. However, their lack of three-dimensional connectivity typically limits their thermal stability as inter-cage interactions in these materials are relatively weak. This is particularly the case for carbazole-based coordination cages. Here, we report the design and synthesis of a benzyl-functionalized octahedral coordination cage that displays moderate surface area and increased thermal stability as compared to its unfunctionalized counterpart. Structural analysis suggests the increased thermal stability is a result of aryl–aryl interactions between ligand groups on adjacent cages. We have further adapted the ligand synthesis strategy to afford a novel, high-yielding preparatory route for the isolation of carbazole-3,6-dicarboxylic acid that does not rely on pyrophoric reagents or transition metal catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Alternate InP synthesis with aminophosphines: solution–liquid–solid nanowire growth

Indium phosphide nanowires are important components in high-speed electronics and optoelectronics, including photodetectors and photovoltaics. However, most syntheses either use high-temperature and costly vapor-phase methodology or highly toxic and pyrophoric tris(trimethylsilyl)phosphine. To expand on the success of the aminophosphine-based InP colloidal quantum dot synthesis, we developed a synthesis for thin (~11 nm) zinc blende InP nanowires at 180 °C using indium tris(trifluoroacetate) and tris(diethylamino)phosphine. A flat nanoribbon morphology was identified by transmission electron and atomic force microscopy analysis, with the stoichiometric (110) lattice plane exposed. Nanowire growth proceeded through a solution–liquid–solid mechanism from in situ-formed indium metal nanoparticles. Molecular byproducts of tris(oleylamino)phosphine oxide and N-oleyltrifluoroacetamide observed by 31 P and 19 F NMR spectroscopy inform a proposed mechanism of indium reduction by the aminophosphine. Morphological control over the nanowire product was achieved by varying the phosphorus injection to control the aspect ratio, the In : P ratio to toggle between nanowires and multipods, and the pre-hot injection evacuation step to favor a quantum dot product. Furthermore, replacing the indium precursor with indium tris(trifluoromethanesulfonate) was found to make bulk zinc blende InP nanowires with an average diameter of >250 nm and tens of microns in length.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Expanding the Zinc Precursor Toolbox: A Comparative Study of Precursors for Thermal ALD of ZnO Thin Films

Atomic layer deposition (ALD) of zinc oxide (ZnO) has been widely researched using diethyl zinc (DEZ)-based methods. The significant importance of thin films of ZnO as transparent conductive oxides (TCO) in optoelectronic devices and photovoltaics warrants examining alternative Zn precursors for ZnO ALD as potential replacements for the pyrophoric DEZ. In this study, we investigated three alternative Zn precursors: Zn(EEKI)2, Zn(DMP)2, ZnEt(HMDS), in the process development for high-quality ZnO thin films and compared them to DEZ. The ALD processes were studied using in situ spectroscopic ellipsometry. The properties of the ALD ZnO films were characterized using ex situ X-ray photoelectron spectroscopy (XPS), Rutherford backscattering spectrometry and nuclear reaction analysis (RBS/NRA), X-ray diffraction (XRD), atomic force microscopy (AFM), transmission electron microscopy (TEM), and ultraviolet-visible (UV/Vis) spectrophotometry. These measurements confirmed the formation of pure, stoichiometric, and polycrystalline ZnO films using all four Zn precursors. Although the selected precursors are chemically diverse Zn compounds, they all yielded saturating ALD processes and high-quality ZnO thin films at 200 °C. This study highlights the potential benefits of alternative zinc precursors in designing ALD processes for ZnO thin films.

Obenlüneschloß, Jorit↗

Sr doping effect on micro structural, transport and magnetic properties in Pr{sub 1-x}Sr{sub x}MnO{sub 3} (0.2 ≤ x ≤ 0.4) nanomanganite

In this article, microstructural, magnetic, magneto-transport, electronic transport properties of Pr{sub 1-x}Sr{sub x}MnO{sub 3} system have been systematically studied in nanometric dimension over the range 0.2 ≤ x ≤ 0.4 by preparing the compound through pyrophoric reaction route. XRD diffraction measurements indicate that all the samples are in orthorhombic Pbnm space group. Electronic and magneto-transport properties of these materials have been thoroughly investigated in nanometric grain size modulation. These Sr doped compounds at x=0.3 exhibit more ferromagnetic metallic behavior at zero field and negative magneto resistance in low temperature. The different magnetic phase was found using ac magnetic susceptibility measurement. Magneto –transport nature is explained using spin polarization tunneling model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sample seal-and-drop device and methodology for high temperature oxide melt solution calorimetric measurements of PuO 2

Thermodynamic properties of refractory materials, such as standard enthalpy of formation, heat content, and enthalpy of reaction, can be measured by high temperature calorimetry. In such experiments, a small sample pellet is dropped from room temperature into a calorimeter operating at high temperature (often 700 °C) with or without a molten salt solvent present in an inert crucible in the calorimeter chamber. However, for hazardous (radioactive, toxic, etc.) and/or air-sensitive (hygroscopic, sensitive to oxygen, pyrophoric, etc.) samples, it is necessary to utilize a sealed device to encapsulate and isolate the samples, crucibles, and solvent under a controlled atmosphere in order to prevent the materials from reactions and/or protect the personnel from hazardous exposure during the calorimetric experiments. We have developed a sample seal-and-drop device (calorimetric dropper) that can be readily installed onto the dropping tube of a calorimeter such as the Setaram AlexSYS Calvet-type high temperature calorimeter to fulfill two functions: (i) load hazardous or air-sensitive samples in an air-tight, sealed container and (ii) drop the samples into the calorimeter chamber using an “off-then-on” mechanism. As a case study, we used the calorimetric dropper for measurements of the enthalpy of drop solution of PuO 2 in molten sodium molybdate (3Na 2 O · 4MoO 3 ) solvent at 700 °C. The obtained enthalpy of –52.21 ± 3.68 kJ/mol is consistent with the energetic systematics of other actinide oxides (UO 2 , ThO 2 , and NpO 2 ). In conclusion, this capability has thus laid the foundation for thermodynamic studies of other Pu-bearing phases in the future.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterisation and evaluation of wastes for treatment in the batch pyrolysis plant in Studsvik, Sweden

The new batch pyrolysis plant in Studsvik is built primarily for treatment of uranium containing dry active waste, 'DAW'. Several other waste types have been identified that are considered or assumed suitable for treatment in the pyrolysis plant because of the possibility to carefully control the atmosphere and temperature of the thermal treatment. These waste types must be characterised and an evaluation must be made with a BAT (Best Available Technology) perspective. Studsvik have performed or plan to perform lab scale pyrolysis tests on a number of different waste types. These include - Pyrophoric materials (uranium shavings) - Uranium chemicals that must be oxidised prior to being deposited in repository - Sludges and oil soaks (this category includes NORM materials) - Ion exchange resins (both 'free' and solidified/stabilised) - Bitumen solidified waste Methodology and assessment criteria for various waste types, together with results obtained for the lab scale tests that have been performed, are described. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

ELUCIDATING URANIUM MONOXIDE SPECTRAL FEATURES FROM A LASER-PRODUCED PLASMA

Uranium, because of its pyrophoricity, oxidizes rapidly in an oxygen-containing high-temperature environment. However, so far, the identification of UO emission from a laser-produced plasma system is limited to a spectral feature around 593.55 nm. The aim of this study is to elucidate UO emission features in the visible spectral regime from uranium plasmas generated in an oxygen-containing ambient environment. The plasmas are produced by focusing nanosecond laser pulses on a uranium metal target in a controlled ambient environment. Space- and time-resolved optical emission spectroscopic investigations are used for isolating U molecular emission structures from crowded U atomic line emission. Our studies highlight that the emission from a U plasma even in the presence of trace oxygen is accompanied by a strong background-like emission with partially resolved bands from uranium monoxide and higher oxides. We also report several UO spectral emission bands in the visible spectral region.

(300.2140) Emission Spectroscopy, (280.5395) Plasm↗

D0 Decommissioning: Storage of depleted uranium modules inside D0 calorimeters after the termination of D0 experiment

Dzero liquid Argon calorimeters contain hadronic modules made of depleted uranium plates. After the termination of D0 detector's operation, liquid Argon will be transferred back to Argon storage Dewar, and all three calorimeters will be warmed up. At this point, there is no intention to disassemble the calorimeters. The depleted uranium modules will stay inside the cryostats. Depleted uranium is a by-product of the uranium enrichment process. It is slightly radioactive, emits alpha, beta and gamma radiation. External radiation hazards are minimal. Alpha radiation has no external exposure hazards, as dead layers of skin stop it; beta radiation might have effects only when there is a direct contact with skin; and gamma rays are negligible - levels are extremely low. Depleted uranium is a pyrophoric material. Small particles (such as shavings, powder etc.) may ignite with presence of Oxygen (air). Also, in presence of air and moisture it can oxidize. Depleted uranium can absorb moisture and keep oxidizing later, even after air and moisture are excluded. Uranium oxide can powder and flake off. This powder is also pyrographic. Uranium oxide may create health problems if inhaled. Since uranium oxide is water soluble, it may enter the bloodstream and cause toxic effects.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A Note on the Reaction of Hydrogen and Plutonium

Plutonium hydride has many practical and experimental purposes. The reaction of plutonium and hydrogen has interesting characteristics, which will be explored in the following analysis. Plutonium is a radioactive actinide metal that emits alpha particles. When plutonium metal is exposed to air, the plutonium oxides and hydrides, and the volume increases. PuH 2 and Pu 2 O 3 are the products. Hydrogen is a catalyst for plutonium's corrosion in air. The reaction can take place at room temperature because it is fairly insensitive to temperature. Plutonium hydride, or PuH 2 , is black and metallic. After PuH 2 is formed, it quickly flakes off and burns. The reaction of hydrogen and plutonium is described as pyrophoric because the product will spontaneously ignite when oxygen is present. This tendency must be considered in the storage of metal plutonium. The reaction is characterized as reversible and nonstoichiometric. The reaction goes as such: Pu + H 2 → PuH 2 . When PuH 2 is formed, the hydrogen/plutonium ratio is between 2 and 2.75 (approximately). As more hydrogen is added to the system, the ratio increases. When the ratio exceeds 2.75, PuH 3 begins to form along with PuH 2 . Once the ratio surpasses 2.9, only PuH 3 remains. The volume of the plutonium sample increases because of the added hydrogen and the change in crystal structure which the sample undergoes. As more hydrogen is added to a system of metal plutonium, the crystal structure evolves. Plutonium has a crystal structure classified as monoclinic. A monoclinic crystal structure appears to be a rectangular prism. When plutonium reacts with hydrogen, the product PuH 2 , becomes a fluorite structure. It can also be described as a face centered cubic structure. PuH 3 forms a hexagonal crystal structure. As plutonium evolves from metal plutonium to plutonium hydride to plutonium trihydride, the crystal structure evolves from monoclinic to fluorite to hexagonal. This change in crystal structure as a result of adding hydrogen is a shared characteristic with other actinide elements. Americium is isostructural with plutonium because they both form cubic dihydrides and hexagonal trihydrides. Reacting hydrogen with plutonium has the practical application of separating plutonium from other materials that don't react as well with hydrogen. When plutonium is placed in a chamber where there is very little oxygen, it can react with hydrogen without igniting. The hydrogen plutonium reaction can then be reversed, thus regaining the separated plutonium. Another application of this reaction is that it can be used to predict how plutonium reacts with other substances. Deuterium and tritium are two isotopes of hydrogen that are of interest. They are known to react likewise to hydrogen because they have similar properties. The reaction of plutonium and isotopes of hydrogen can prove to be very informative.

08 HYDROGEN↗