Search NASA⌕ Search

SEARCH · Search NASA

Results for “STRETCH FORMING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Type 2 diabetes impairs annulus fibrosus fiber deformation and rotation under disc compression in the University of California Davis type 2 diabetes mellitus (UCD-T2DM) rat model

Abstract Understanding the biomechanical behavior of the intervertebral disc is crucial for studying disease mechanisms and developing tissue engineering strategies for managing disc degeneration. We used synchrotron small-angle X-ray scattering to investigate how changes to collagen behavior contribute to alterations in the disc’s ability to resist compression. Coccygeal motion segments from 6-month-old lean Sprague-Dawley rats ( n=7) and diabetic obese University of California Davis type 2 diabetes mellitus (UCD-T2DM) rats ( n=6, diabetic for 68±7 days) were compressed during simultaneous synchrotron scanning to measure collagen strain at the nanoscale (beamline 7.3.3 of the Advanced Light Source). After compression, the annulus fibrosus was assayed for nonenzymatic cross-links. In discs from lean rats, resistance to compression involved two main energy-dissipation mechanisms at the nanoscale: (1) rotation of the two groups of collagen fibrils forming the annulus fibrosus and (2) straightening (uncrimping) and stretching of the collagen fibrils. In discs from diabetic rats, both mechanisms were significantly impaired. Specifically, diabetes reduced fibril rotation by 31% and reduced collagen fibril strain by 30% (compared to lean discs). The stiffening of collagen fibrils in the discs from diabetic rats was consistent with a 31% higher concentration of nonenzymatic cross-links and with evidence of earlier onset plastic deformations such as fibril sliding and fibril–matrix delamination. These findings suggest that fibril reorientation, stretching, and straightening are key deformation mechanisms that facilitate whole-disc compression, and that type 2 diabetes impairs these efficient and low-energy elastic deformation mechanisms, thereby altering whole-disc behavior and inducing the earlier onset of plastic deformation.

Rosenberg, James L.↗
DOE OSTI2020

Revealing the Predominant Surface Facets of Rough Cu Electrodes under Electrochemical Conditions

Metal electrodes with rough surfaces are frequently found to convert CO or CO 2 to hydrocarbons and oxygenates with high selectivity and at high reaction rates in comparison with their smooth counterparts. The atomic-level morphology of a rough electrode is likely one key factor responsible for its comparatively high catalytic selectivity and activity. However, few methods are capable of probing the atomic-level structure of rough metal electrodes under electrocatalytic conditions. As a result, the nuances in the atomic-level surface morphology that control the catalytic characteristics of these electrodes have remained largely unexplored. Because the C≡O stretching frequency of atop-bound CO (CO atop ) depends on the coordination of the underlying metal atom, the IR spectrum of this reaction intermediate on the copper electrode could, in principle, provide structural information about the catalytic surface during electrolysis. However, other effects, such as dynamic dipole coupling, easily obscure the dependence of the frequency on the surface morphology. Further, in the limit of low CO atop coverage, where coupling effects are small, the C≡O stretching frequencies of CO atop on Cu(111) and Cu(100) facets are virtually identical. Therefore, on the basis of the C≡O stretching frequency, it is not straightforward to distinguish between these two ubiquitous surface facets, which exhibit vastly different CO reduction activities. Herein, we show that key features of the atomic-level surface morphology of rough copper electrodes can be inferred from the potential dependence of the line shape of the C≡O stretching band of CO atop . Specifically, we compared two types of rough copper thin-film electrodes that are routinely employed in the context of surface-enhanced infrared absorption spectroscopy (SEIRAS). We found that copper films that are electrochemically deposited on Si-supported Au films (CuAu–Si) are poor catalysts for the reduction of CO to ethylene in comparison to copper films (Cu–Si) that are electrolessly deposited onto Si crystals. As quantified by differential electrochemical mass spectrometry (DEMS), the onset potential for ethylene is ~200 ± 65 mV more cathodic for CuAu–Si than that for Cu–Si. To reveal the origin of the disparate catalytic properties of Cu–Si and CuAu–Si, we probed the surfaces of the electrodes with cyclic voltammetry (CV) and SEIRAS. The CV characterization suggests that the (111) surface facet predominates on CuAu–Si, whereas the (100) facet is more common on Cu–Si. SEIRAS reveals that the line shape of the C≡O stretching of CO atop is composed of two bands that are attributable to CO atop on terrace and defect sites. The different surface structures manifest themselves in the form of starkly different potential dependences of the line shape of the C≡O stretching mode of CO atop on the two types of electrodes. With a simple Boltzmann model that considers the different adsorption energies of CO atop on terrace and defect sites, and the resulting CO atop populations on terrace and defect sites, we deduced that the observed electrode-specific potential dependence of the line shape is consistent with the presence of different predominant terrace sites on the two types of films. This strategy for assessing the atomic-level morphology is not restricted to SEIRAS but could also be applied to the C≡O stretching bands recorded with surface-enhanced Raman spectroscopy (SERS), which is suitable for probing a wide range of rough copper electrodes. Therefore, with this work, we establish the potential dependence of the C≡O stretching band of CO atop as a probe of the atomic-level surface structure of rough metal electrodes under electrochemical conditions. When it is coupled with complementary techniques, this methodology provides essential structural information for further improvement in the reaction selectivity of rough metal electrodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Collective Vibrational Strong Coupling Effects on Molecular Vibrational Relaxation and Energy Transfer: Numerical Insights via Cavity Molecular Dynamics Simulations**

Abstract For a small fraction of hot CO 2 molecules immersed in a liquid‐phase CO 2 thermal bath, classical cavity molecular dynamics simulations show that forming collective vibrational strong coupling (VSC) between the C=O asymmetric stretch of CO 2 molecules and a cavity mode accelerates hot‐molecule relaxation. This acceleration stems from the fact that polaritons can be transiently excited during the nonequilibrium process, which facilitates intermolecular vibrational energy transfer. The VSC effects on these rates 1) resonantly depend on the cavity mode detuning, 2) cooperatively depend on Rabi splitting, and 3) collectively scale with the number of hot molecules. For larger cavity volumes, the average VSC effect per molecule can remain meaningful for up to N ≈10 4 molecules forming VSC. Moreover, the transiently excited lower polariton prefers to relax by transferring its energy to the tail of the molecular energy distribution rather than distributing it equally to all thermal molecules. As far as the parameter dependence is concerned, the vibrational relaxation data presented here appear analogous to VSC catalysis in Fabry–Pérot microcavities.

Li, Tao E.↗
DOE OSTI2021

Collective Vibrational Strong Coupling Effects on Molecular Vibrational Relaxation and Energy Transfer: Numerical Insights via Cavity Molecular Dynamics Simulations**

Abstract For a small fraction of hot CO 2 molecules immersed in a liquid‐phase CO 2 thermal bath, classical cavity molecular dynamics simulations show that forming collective vibrational strong coupling (VSC) between the C=O asymmetric stretch of CO 2 molecules and a cavity mode accelerates hot‐molecule relaxation. This acceleration stems from the fact that polaritons can be transiently excited during the nonequilibrium process, which facilitates intermolecular vibrational energy transfer. The VSC effects on these rates 1) resonantly depend on the cavity mode detuning, 2) cooperatively depend on Rabi splitting, and 3) collectively scale with the number of hot molecules. For larger cavity volumes, the average VSC effect per molecule can remain meaningful for up to N ≈10 4 molecules forming VSC. Moreover, the transiently excited lower polariton prefers to relax by transferring its energy to the tail of the molecular energy distribution rather than distributing it equally to all thermal molecules. As far as the parameter dependence is concerned, the vibrational relaxation data presented here appear analogous to VSC catalysis in Fabry–Pérot microcavities.

Li, Tao E.↗
DOE OSTI2021

Extreme Energy Dissipation via Material Evolution in Carbon Nanotube Mats

Abstract Thin layered mats comprised of an interconnected meandering network of multiwall carbon nanotubes (MWCNT) are subjected to a hypersonic micro‐projectile impact test. The mat morphology is highly compliant and while this leads to rather modest quasi‐static mechanical properties, at the extreme strain rates and large strains resulting from ballistic impact, the MWCNT structure has the ability to reconfigure resulting in extraordinary kinetic energy (KE) absorption. The KE of the projectile is dissipated via frictional interactions, adiabatic heating, tube stretching, and ultimately fracture of taut tubes and the newly formed fibrils. The energy absorbed per unit mass of the film can range from 7–12 MJ kg −1 , much greater than any other material.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Assessment of Benefits of Solid-State Advanced Manufacturing Processes for Nuclear Energy Products

The Advanced Materials and Manufacturing Technology (AMMT) program develops cross cutting technologies in support of a broad range of nuclear reactor technologies and maintains U.S. leadership in materials and manufacturing technologies for nuclear energy applications. This overall project provides the U.S. Department of Energy a critical feasibility study comparison of three solid-state processes to other AM processes, thereby providing the feasibility of the solid-state processes examined to manufacture 316H SS and ODS steel components: • Fused-filament fabrication (FFF): This work provides an initial evaluation of the impact of powder morphology and sizes on the FFF process, and the feasibility and adaptability for different material systems, to use FFF for ODS steels and 316 SS. • Shear-assisted processing and extrusion (ShAPE): Specifically for this portion of the project on ShAPE tube forming, the objectives will be to determine the feasibility to direct tube forming of high tensile strength steel tubing, specifically for ODS steel to determine the effect of the patented extrusion process on the dispersoids of the ODS material. Additionally, as often ODS powders are mechanically alloyed and therefore more platelike or angular, this feasibility was to explore the impact on the optimization process and initial feasibility of direct tube forming. • Cold spray and friction stir additive manufacturing as a stretch goal: Bulk and near net shape manufacturing processes for high-temperature, high-strength alloys are needed. Additionally, cold spray techniques can be applied in-situ at the operational level for repair and can provide multiple benefits to the nuclear industry. These tasks aim to provide information to show benefits of cold spray during the full life cycle, namely research and development, product manufacturing, and repair to mention a few key points.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Structural and Spectroscopic Trends in Alkali Tris(Acetato)Actinyl(VI) Complexes

A series of alkali tris(acetato)actinyl(VI) compounds M[AnO 2 (CH 3 COO) 3 ] (M=Na, K, Rb, Cs and An=U, Np, Pu) is reported, applying a combination of singlecrystal X-ray diffraction, solid-state Raman spectroscopy, and U(VI) luminescence spectroscopy for their structural and spectroscopic characterization. The results show that complexes formed from the same alkali metal but different actinyl ions are mostly isostructural. The symmetric actinyl stretch (ν 1 (An=O yl )) in these isostructural complexes undergoes a redshift within the actinide series despite the shortening of the actinyl bond due to the actinide contraction. Complexes formed from the same actinyl but co-crystallized with different alkali metals show a progression toward lower space group symmetry. While the actinyl bond length remains unmodulated within the alkali series, a small redshift of ν 1 (An=O yl ) is observed, indicating minor changes in the vibrational properties of the actinyl moiety caused by the structural progression towards lower symmetry. This subtle change is also evidenced by a redshift of the U(VI) luminescence spectra within the M[UO 2 (CH 3 COO) 3 ] series.

Raman↗
DOE OSTI2022

What Is the Right Level of Activation of a High-Spin {FeNO} 7 Complex to Enable Direct N–N Coupling? Mechanistic Insight into Flavodiiron NO Reductases

Flavodiiron nitric oxide reductases (FNORs), found in pathogenic bacteria, are capable of reducing nitric oxide (NO) to nitrous oxide (N 2 O) to detoxify NO released by the human immune system. Previously, we reported the first FNOR model system that mediates direct NO reduction (Dong, H. T.; et al. J. Am. Chem. Soc. 2018, 140, 13429-13440), but no intermediate of the reaction could be characterized. Here, we present a new set of model complexes that, depending on the ligand substitution, can either mediate direct NO reduction or stabilize a highly activated high-spin (hs) {FeNO} 7 complex, the first intermediate of the reaction. The precursors, [{Fe II (MPA-(RPhO) 2 )} 2 ] (1, R = H and 2, R = t Bu, Me), were prepared first and fully characterized. Complex 1 (without steric protection) directly reduces NO to N 2 O almost quantitatively, which constitutes only the second example of this reaction in model systems. Contrarily, the reaction of sterically protected 2 with NO forms the stable mononitrosyl complex 3, which shows one of the lowest N-O stretching frequencies (1689 cm -1 ) observed so far for a mononuclear hs-{FeNO} 7 complex. Here this study confirms that an N-O stretch & LE;1700 cm -1 represents the appropriate level of activation of the FeNO unit to enable direct NO reduction. The higher activation level of these hs-{FeNO} 7 complexes required for NO reduction compared to those formed in FNORs emphasizes the importance of hydrogen bonding residues in the active sites of FNORs to activate the bound NO ligands for direct N-N coupling and N2O formation. The implications of these results for FNORs are further discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Quantum area fluctuations from gravitational phase space

We study the gravitational phase space associated to a stretched horizon within a finite-sized causal diamond in (d + 2)-dimensional spacetimes. By imposing the Raychaudhuri equation, we obtain its constrained symplectic form using the covariant phase space formalism and derive the relevant quantum commutators by inverting the symplectic form and quantizing. Finally, we compute the area fluctuations of the causal diamond by taking a Carrollian limit of the stretched horizon in pure Minkowski spacetime, and derive the relationship $\left\langle {\left(\Delta A\right)}^2\right\rangle \ge \frac{2\pi G}{d}\left\langle A\right\rangle$, showing that the variance of the area fluctuations is proportional to the area itself.

classical theories of gravity↗
DOE OSTI2021

Vibrational spectroscopy of uranium tetrafluoride hydrates

Uranium tetrafluoride (UF 4 ) is an important intermediate in the production of UF6 and nuclear fuel. Historical characterization of UF 4 with Raman spectroscopy was plagued with ambiguity until the first accurate Raman spectrum was published by our group in 2016. Although generally considered to be relatively stable, UF 4 can hydrolyze to form numerous UF 4 hydrates that may play a role in future uranium waste forms. In contrast to anhydrous UF 4 , the hydrates, with their OH stretch and HOH bending modes, can be spectroscopically characterized by the type and degree of water bonding in the crystal lattice, which can yield additional information about their crystal structure. Herein, vibrational spectroscopy (Raman and infrared) was used to characterize three different UF 4 hydrates: UF 4 (H 2 O) 0.33 , U 3 F 12 (H 2 O), and UF 4 (H 2 O) 2.5 . Spectra show the different hydrates vary in the number of observed bands, full-width half-maximum of the bands, and band intensity. These differences are due to varying interactions between the OH stretch and HOH bending modes with UF 4 and the polymeric UF 4 structure in the crystal lattice. These vibrational data, in combination with spectral fitting and crystallographic structures measured with powder X-ray diffraction and single crystal X-ray diffraction, provide unique details on the location of water molecules in the crystal lattice of hydrated UF 4 , and provide an interesting contrast to the vibrational spectra of anhydrous UF 4 .

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Reversible Nanocomposite by Programming Amorphous Polymer Conformation Under Nanoconfinement

Nanoconfinements are utilized to program how polymers entangle and disentangle as chain clusters to engineer pseudo bonds with tunable strength, multivalency, and directionality. When amorphous polymers are grafted to nanoparticles that are one magnitude larger in size than individual polymers, programming grafted chain conformations can "synthesize" high-performance nanocomposites with moduli of ≈25GPa and a circular lifecycle without forming and/or breaking chemical bonds. These nanocomposites dissipate external stresses by disentangling and stretching grafted polymers up to ≈98% of their contour length, analogous to that of folded proteins; use both polymers and nanoparticles for load bearing; and exhibit a non-linear dependence on composition throughout the microscopic, nanoscopic, and single-particle levels.

Chen, Tiffany↗
DOE OSTI2022

Single-molecule investigations of single-chain cellulose biosynthesis

Cellulose biosynthesis in sessile bacterial colonies originates in the membrane-integrated bacterial cellulose synthase (Bcs) AB complex. We utilize optical tweezers to measure single-strand cellulose biosynthesis by BcsAB from Rhodobacter sphaeroides . Synthesis depends on uridine diphosphate glucose, Mg 2+ , and cyclic diguanosine monophosphate, with the last displaying a retention time of ∼80 min. Below a stall force of 12.7 pN, biosynthesis is relatively insensitive to force and proceeds at a rate of one glucose addition every 2.5 s at room temperature, increasing to two additions per second at 37°. At low forces, conformational hopping is observed. Single-strand cellulose stretching unveiled a persistence length of 6.2 nm, an axial stiffness of 40.7 pN, and an ability for complexes to maintain a tight grip, with forces nearing 100 pN. Stretching experiments exhibited hysteresis, suggesting that cellulose microstructure underpinning robust biofilms begins to form during synthesis. Cellohexaose spontaneously binds to nascent single cellulose strands, impacting polymer mechanical properties and increasing BcsAB activity.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Modeling of H2 Dispersion at ARIES

Hydrogen is a versatile and clean energy carrier that can be produced from various renewable sources such as wind, solar, and hydropower and help decarbonize electricity grids, industry, and transportation. Using the Hydrogen Research Facility under Advanced Research on Integrated Energy Systems (ARIES) at the National Renewable Energy Laboratory's (NREL) Flatirons campus as a test bench, the study examines the feasibility, useability, and value of using computational fluid dynamics (CFD) techniques to model hydrogen dispersion. The ARIES facility was chosen because controlled hydrogen releases can be performed at a rate of 27 kg-H2/hr. Site-specific atmospheric and weather condition data such as wind speed and temperature were used as inputs to the model. The results show statistical distributions and ranges of hydrogen concentrations at locations throughout the domain. Wind conditions are found to significantly impact the release behavior, including the hydrogen cloud's direction and concentrations. At low wind speeds (below 1 mph), hydrogen forms a cloud and at higher wind speeds (> 2-4 mph) hydrogen plume stretches in the direction of wind momentum. From >100 simulations for ARIES site-specific conditions, statistical quantities combined with a clustering algorithm were used to propose sensor location at various elevations from ground.

dispersion↗
DOE OSTI2026

Hidden features in the OH-stretching spectra of amino acid decorated air–water interfaces

Chemical reactivity at the air–water interface is governed by the interfacial solvation of reactive species. For instance, during aqueous amino acid-based CO 2 absorption, water reorganizes around the reactive sites and couples dynamically with reaction pathways, facilitating the reaction. In this context, surface-sensitive vibrational sum-frequency generation (vSFG) spectroscopy can probe the OH stretch vibrations of interfacial water and determine the solvation structures around reactants and products, thereby furthering our understanding of the role of interfacial solvation. However, vSFG spectra of the air–water interface in the presence of charged species can be remarkably complex; key species-bound local water structures with distinct orientations may be hidden beneath prominent vSFG peaks arising from water–water hydrogen bonds and remain difficult to resolve. Here, we measure and compute vSFG spectra of the water OH stretch at air–water interfaces decorated with amino acids in their zwitterionic and anionic forms, as well as equimolar mixtures of these forms with bicarbonate. The latter represents post-CO 2 -absorption conditions. We find that computing depth- and frequency-dependent spectral densities—decomposed into contributions from water molecules hydrogen-bonded exclusively to other water molecules, exclusively to amines, exclusively to carboxylates, or shared between these polar/charged groups—is indispensable for accurate interpretation of the vSFG spectra. Key findings include orientational flip-flop in water sub-layers, strong carboxylate-water H-bonding, and water orientational ordering extending into the bulk aqueous phase induced by anionic amino acids. Here, this study provides a computational spectroscopic platform for improved understanding of interfacial solvation relevant to interfacial reactivity.

Air-water interface↗
DOE OSTI2026

Photodissociation and Infrared Spectroscopy of U + (CO 2 ) n , UO + (CO 2 ) n , and UO 2+ (CO 2 ) n Cation-Molecular Complexes

Laser vaporization of uranium in a pulsed supersonic expansion of carbon dioxide is used to produce complexes of the form U + (CO 2 ) n , UO + (CO 2 ) n , and UO 2+ (CO 2 ) n . These ions are selected in a reflectron time-offlight mass spectrometer and studied with visible laser photodissociation and tunable infrared laser photodissociation spectroscopy in the region of the CO 2 antisymmetric stretch. The dissociation patterns and spectroscopy of these ions indicate that CO 2 ligands are intact molecules. Although reaction products that form oxide-carbonyl or oxalate species are predicted to be stable, there is no direct evidence in the frequency range studied for the formation of these species. There is no clear indication for the coordination numbers for singly charged uranium and its oxide complexes with CO 2 . However, there is strong support in the vibrational patterns for an eight-coordinate complex of the doubly charged UO 2+ species, i.e., UO 2+ (CO 2 ) 8 .

Cluster chemistry↗
DOE OSTI2020

A collective elastic fluctuation mechanism for decoupling and stretched relaxation in glassy colloidal and molecular liquids

We propose a microscopic theory for the decoupling of self-diffusion and structural relaxation in glass-forming liquids within the Elastically Collective Nonlinear Langevin Equation (ECNLE) activated dynamics framework. Our central hypothesis is that the heterogeneity relevant to this problem is static fluctuations of local density on the scale of 3–4 particle diameters and how this changes local packing correlations. These fluctuations modify the degree of dynamical cage expansion that mechanistically couples intracage large amplitude hopping and longer range collective elasticity in ECNLE theory. Decoupling only emerges in the deeply supercooled regime where the strongly temperature dependent elastic barrier becomes non-negligible relative to its noncooperative local analog. The theory makes predictions for various aspects of the decoupling phenomenon, including apparent fractional power law Stokes-Einstein behavior, that appear to be consistent with experiments and simulations on hard sphere fluids and molecular liquids. Of central importance is a microscopic connection between the barrier fluctuation variance and most probable barrier height. Sensible results are also obtained for the nonexponential stretching of a generic relaxation time correlation function and its temperature evolution. Nonuniversality can arise from the relative importance of the local and collective barriers (related to fragility) and the precise magnitude of the length scale that defines the transition from local cage to elastic physics. Comparison is made with a traplike model based on a Gaussian distribution of barriers.

Xie, Shi-Jie (ORCID:0000000333174720)↗
DOE OSTI2022

Super-Large-Scale Hierarchically Porous Films Based on Self-Assembled Eye-Like Air Pores for High-Performance Daytime Radiative Cooling

Metal-free polymer daytime radiative cooling coatings with hierarchical eye-like air pores are proposed and fabricated with a super-large-scale film-stretching method. The hierarchically porous film (HPF) can be further coated with polymethyl methacrylate (PMMA) micro-hemispheres, forming coated HPF (cHPF), which do not dramatically change the optical or thermal properties. The cHPF is slightly better with a lower solar absorptivity (2.4%) and a higher thermal emissivity over the atmospheric transparency window (90.1%). The low solar absorptivity is due to the strong scattering of the hierarchical eye-like air pores, while the molecular vibrations and the focusing effect of the PMMA micro-hemispheres contribute to the high emissivity. Further, an average mid-day temperature reduction of 7.92 °C is achieved relative to the air temperature, and the average cooling power reaches 116.0 W m -2 , which are much better than the cooling performances of the commercial cooling cushion. During the day, the cHPF-covered simulated building is up to 6.47 and 4.84 °C cooler than the ambient and the white painted counterpart, respectively. The film is durable and resistant to chemical etching, and very promising to use globally, especially in warm and tropical regions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Locating anionic hydrogen in Ba 3 (Yb,Lu) 2 O 5 H 2 : A combined approach of X-ray diffraction, crystal chemistry, and DFT calculations

By a combination of x-ray diffraction, structural chemistry, and DFT calculations, the presence and location of anionic hydrogen in the two new, layered lanthanide oxyhydrides, Ba 3 Ln 2 O 5 H 2 (Ln ​= ​Yb, Lu) is inferred. Single crystals of the compounds have been synthesized from a molten barium flux with the addition of small amounts of BaH 2 . These phases crystallize in space group I4/mmm (#139, Z ​= ​2) with lattice parameters a ​= ​4.3336(2) Å and c ​= ​22.7197(6) Å, and a ​= ​4.3291(1) Å and c ​= ​22.597(1) Å, respectively. The Ba 3 Ln 2 O 5 H 2 phases comprise two different structural moieties: a perovskite double layer of stoichiometry Ba 2 Ln 2 O 5 H – formed by corner-connected LnO 5 tetragonal bi-pyramids with a terminating hydrogen anion, and a puckered rocksalt-type (BaH) + layer that is stretched along the c-axis. DFT calculations were used to arrive at hydrogen positions that minimize energy and are consistent with structural chemistry principles. Furthermore, the calculations show that the valence band edge is dominated by oxygen 2p orbitals with hydrogen 1s states admixed. The conduction band is formed by barium 5d-orbitals and Lu (Yb) 5d-orbitals. These are characteristics of materials with anionic H – . These new phases are isostructural with the Ba 3 Ln 2 O 5 Cl 2 (Ln ​= ​Gd–Lu) family of compounds with the chlorine atom in the same apical position as the hydrogen atom. Finally, steric effects limit the size of the lanthanide ion for Ba 3 Ln 2 O 5 H 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗