Search NASA⌕ Search

SEARCH · Search NASA

Results for “Se(OF)2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Flux-Assisted Boron Chalcogen Mixture (BCM) Method for Synthesizing Mixed Chalcogenide Semiconductors (AkRE 2 Si 2 Se x S 8– x and CaRE 2 Si 2 Se 8 ) ( Ak = Ca and Sr; RE = La, Ce, Pr, Nd, and Sm): Investigation of Their Magnetic and Optical Properties

We report a detailed structural analysis of a series of ten quaternary rare-earth-containing seleno-thiosilicates AkRE 2 Si 2 Se x S 8-x and selenosilicates, CaRE 2 Si 2 Se 8 (Ak = Ca and Sr; RE = La, Ce, Pr, Nd, and Sm). Single crystals were obtained by using the flux-assisted boron chalcogen mixture (BCM) method and single crystal X-ray diffraction was used to determine their structures. All members of the AkRE 2 Si 2 Se x S 8-x and CaRE 2 Si 2 Se 8 series crystallize in the space group R$\bar{3}$c (space group number 167) of the trigonal crystal system. The single-crystal X-ray diffraction analysis revealed a strong preference for Se/S atoms to occupy one vs. the other of the two available sites. Polycrystalline samples were used for magnetic susceptibility and UV–visible diffuse reflectance measurements. Magnetic measurements show that CaCe₂Si₂Se₁.₇₃S₆.₂₇ and CaNd₂Si₂Se₂.₅S₅.₅ are paramagnetic with negative Weiss constants (θ = –60.1 and –26.2). Diffuse reflectance analysis gives optical band gaps of 2.7(1) eV (CaLa₂Si₂Se₂.₃₈S₅.₆₂), 2.2(1) eV (CaCe₂Si₂Se₁.₇₃S₆.₂₇), 2.5(1) eV (CaNd₂Si₂Se₂.₅S₅.₅), and 2.0(1) eV (CaCe₂Si₂Se₈), consistent with density functional theory calculations. By partially or fully replacing S sites with Se it was possible to achieve band gap tuning. Photoluminescence behavior was also investigated for CaCe 2 Si 2 Se 1.73 S 6.27 via irradiation with 375 nm ultraviolet light.

BCM method↗
DOE OSTI2021

Optimization of the Growth of the Van der Waals Materials Bi 2 Se 3 and (Bi 0.5 In 0.5 ) 2 Se 3 by Molecular Beam Epitaxy

The naturally existing chalcogenide Bi 2 Se 3 is topologically nontrivial due to the band inversion caused by the strong spin-orbit coupling inside the bulk of the material. Here, the surface states are spin polarized, protected by the time-inversion symmetry, and thus robust to the scattering caused by nonmagnetic defects. A high-purity topological insulator thin film can be easily grown via molecular beam epitaxy (MBE) on various substrates to enable novel electronics, optics, and spintronics applications. However, the unique surface state properties have historically been limited by the film quality, which is evaluated by crystallinity, surface morphology, and transport data. Here we propose and investigate different MBE growth strategies to improve the quality of Bi 2 Se 3 thin films grown by MBE. Based on the surface passivation status, we have classified the substrates into two categories, self-passivated or unpassivated, and determine the optimal growth mechanisms on the representative sapphire and GaAs, respectively. For Bi 2 Se 3 on GaAs, the surface passivation status determines the dominant growth mechanism. In the end, growths of the topological trivial insulator (Bi 0.5 In 0.5 ) 2 Se 3 (BIS) on GaAs are investigated following the protocols proposed.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Crystal Structure of Colloidally Prepared Metastable Ag 2 Se Nanocrystals

Structural polymorphism is known for many bulk materials; however, on the nanoscale metastable polymorphs tend to form more readily than in the bulk, and with more structural variety. One such metastable polymorph observed for colloidal Ag 2 Se nanocrystals has traditionally been referred to as the “tetragonal” phase. While there are reports on the chemistry and properties of this metastable polymorph, its crystal structure, and therefore electronic structure, has yet to be determined. We report that an anti-PbCl 2 -like structure type (space group P2 1 /n) more accurately describes the powder X-ray diffraction and X-ray total scattering patterns of colloidal Ag 2 Se nanocrystals prepared by several different methods. Density functional theory (DFT) calculations indicate that this anti-PbCl 2 -like Ag 2 Se polymorph is a dynamically stable, narrow-band-gap semiconductor. Here, the anti-PbCl 2 -like structure of Ag 2 Se is a low-lying metastable polymorph at 5–25 meV/atom above the ground state, depending on the exchange-correlation functional used.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Opposite current-induced spin polarizations in bulk-metallic Bi 2 Se 3 and bulk-insulating Bi 2 Te 2 Se topological insulator thin flakes

One of the most fundamental and exotic properties of three-dimensional (3D) topological insulators (TIs) is spin-momentum locking (SML) of their topological surface states (TSSs), promising for potential applications in future spintronics. However, other possible conduction channels, such as a trivial two-dimensional electron gas (2DEG) with strong Rashba-type spin-orbit interaction (SOI) and bulk-conducting states that may possess a spin Hall effect (SHE), can coexist in 3D TIs, making determining the origin of the current-induced spin polarization (CISP) difficult. Here, we directly compared the CISP between bulk-insulating Bi 2 Te 2 Se (BTS221) and bulk-metallic Bi2Se3 thin flakes using spin potentiometry. In the bulk-insulating BTS221, the observed CISP has a sign consistent with the expected helicity of the SML of the TSS, but an opposite sign to its calculated bulk spin Hall conductivity. However, compared to BTS221, an opposite CISP is observed in the bulk-metallic Bi2Se3, consistent with both the expectations of its Rashba-Edelstein effect of the band-bending induced 2DEG and bulk intrinsic spin Hall Effect (SHE). If one assumes a representative occupation of the Rashba band of 3×10 13 cm –2 in Bi 2 Se 3 with a relevant relaxation time of 100 fs, the contribution to the CISP could be more dominated by the bulk intrinsic SHE. Our results provide an electrical way to distinguish the TSS from other possible conducting channels in spin transport measurements on 3D TIs, and open ways for the potential applications in charge-spin conversion devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Synthesis, Magnetic Properties, and Electronic Structure of Magnetic Topological Insulator MnBi 2 Se 4

The intrinsic magnetic topological insulators MnBi 2 Te 4 and MnBi 2 Se 4 support novel topological states related to symmetry breaking by magnetic order. Unlike MnBi 2 Te 4 , the study of MnBi 2 Se 4 has been inhibited by the lack of bulk crystals, as the van der Waals (vdW) crystal is not the thermodynamic equilibrium phase. In this study, we report the layer-by-layer synthesis of vdW MnBi 2 Se 4 crystals using nonequilibrium molecular beam epitaxy. Atomic-resolution scanning transmission electron microscopy and scanning tunneling microscopy identify a well-ordered vdW crystal with septuple-layer base units. The magnetic properties agree with the predicted layered antiferromagnetic ordering but disagree with its predicted out-of-plane orientation. Instead, our samples exhibit an easy-plane anisotropy, which is explained by including dipole–dipole interactions. Angle-resolved photoemission spectroscopy reveals the gapless Dirac-like surface state, which demonstrates that MnBi 2 Se 4 is a topological insulator above the magnetic-ordering temperature. These studies show that MnBi 2 Se 4 is a promising candidate for exploring rich topological phases of layered antiferromagnetic topological insulators.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Carrier Mobility Modulation in Cu 2 Se Composites Using Coherent Cu 4 TiSe 4 Inclusions Leads to Enhanced Thermoelectric Performance

Carrier transport engineering in bulk semiconductors using inclusion phases often results in the deterioration of carrier mobility (μ) owing to enhanced carrier scattering at phase boundaries. Here, we show by leveraging the temperature-induced structural transition between the α-Cu 2 Se and β-Cu 2 Se polymorphs that the incorporation of Cu 4 TiSe 4 inclusions within the Cu 2 Se matrix results in a gradual large drop in the carrier mobility at temperatures below 400 K (α-Cu 2 Se), whereas the carrier mobility remains unchanged at higher temperatures, where the β-Cu 2 Se polymorph dominates. The sharp discrepancy in the electronic transport within the α-Cu 2 Se and β-Cu 2 Se matrices is associated with the formation of incoherent α-Cu 2 Se/Cu 4 TiSe 4 interfaces, owing to the difference in their atomic structures and lattice parameters, which results in enhanced carrier scattering. In contrast, the similarity of the Se sublattices between β-Cu 2 Se and Cu 4 TiSe 4 gives rise to coherent phase boundaries and good band alignment, which promote carrier transport across the interfaces. Interestingly, the different cation arrangements in Cu 4 TiSe 4 and β-Cu 2 Se contribute to enhanced phonon scattering at the interfaces, which leads to a reduction in the lattice thermal conductivity. The large reduction in the total thermal conductivity while preserving the high power factor of β-Cu 2 Se in the (1–x)Cu 2 Se/(x)Cu 4 TiSe 4 composites results in an improved ZT of 1.2 at 850 K, with an average ZT of 0.84 (500–850 K) for the composite with x = 0.01. Furthermore, this work highlights the importance of structural similarity between the matrix and inclusions when designing thermoelectric materials with improved energy conversion efficiency.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Synthesis and Electrical Properties of a New Compound (BiSe) 0.97 (Bi 2 Se 3 ) 1.26 (BiSe) 0.97 (MoSe 2 ) Containing Metallic 1T-MoSe 2

The synthesis and electrical properties of a new misfit compound containing BiSe, Bi 2 Se 3 , and MoSe 2 constituent layers are reported. The reaction pathway involves competition between the formation of (BiSe) 1+x (Bi 2 Se 3 ) 1+y (BiSe) 1+x (MoSe 2 ) and [(Bi 2 Se 3 ) 1+y ] 2 (MoSe 2 ). Excess Bi and Se are required in the precursor to synthesize (BiSe) 1+x (Bi 2 Se 3 ) 1+y (BiSe) 1+x (MoSe 2 ). High-angle annular dark field-scanning transmission electron microscopy (HAADF-STEM) confirm the stacking sequence of the heterostructure. Small grains of both 2H- and 1T-MoSe 2 are observed in the MoSe 2 layers. X-ray photoelectron spectroscopy (XPS) indicates that there is a significantly higher percentage of 1T-MoSe 2 in (BiSe) 1+x (Bi 2 Se 3 ) 1+y (BiSe) 1+x (MoSe 2 ) than in (BiSe) 0.97 (MoSe 2 ), suggesting that more charge transfer to MoSe 2 occurs due to the additional BiSe layer. The additional charge transfer results in (BiSe) 1+x (Bi 2 Se 3 ) 1+y (BiSe) 1+x (MoSe 2 ) having a low resistivity (14–19 μΩ m) with metallic temperature dependence. Furthermore, the heterogeneous mix of MoSe 2 polytypes observed in the XPS complicates the interpretation of the Hall data as two bands contribute to the electrical continuity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

A Recipe for a Great Meal: A Benchtop Route from Elemental Se to Superior Thermoelectric β-Ag 2 Se

The low-temperature modification of β-Ag 2 Se has proven to be useful as a near-room-temperature thermoelectric material. Over the past years, research has been devoted to interstitial, vacancy, and substitutional doping into the parent β-Ag 2 Se structure, aiming at tuning the material’s charge and heat transport properties to enhance thermoelectric performance. The transformation of β-Ag 2 Se into α-Ag 2 Se at ~134 °C and the low solubility of dopants are the main obstacles for the doping approach. Herein, we report a facile, safe, scalable, and cost-effective benchtop approach to successfully produce metal-doped β-Ag 2 Se. The doped materials display a remarkable enhancement of thermoelectric performance with a record-high peak zT of 1.30 at 120 °C and an average zT of ~1.15 in the 25–120 °C range for 0.2 at. % Zn-doped Ag 2 Se. The enhancement in zT is attributed to point defects created by Zn doping into Ag vacancies/interstitials, which enhances the scattering of phonons and tunes the charge carrier properties, leading to the significant suppression of thermal conductivity. In conclusion, the simplicity of the synthetic method developed herein and the high performance of the final products provide an avenue to produce high-quality Ag 2 Se-based thermoelectric materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Surface and interface structures of epitaxial Sb 2 Se 3 on mica

Sb 2 Se 3 thin film is an emerging photon absorber used in solar cells. We report the study of surface and interface structures of Sb2Se3(1 2 0) film grown on mica substrate by a high-rate vapor transport method. The interface epitaxial relationship between Sb 2 Se 3 and mica examined by the cross- sectional TEM images and diffraction patterns along the [0 0 1] and [10] directions of Sb 2 Se 3 reveal a rectangular structure with lengths of 4.03 ± 0.1 Å and 5.29 ± 0.1 Å, consistent with the [1 2 0] out-of-plane direction of Sb 2 Se 3 bulk lattice parameters. In contrast, the two-dimensional reciprocal space map (2D map) constructed from azimuthal reflection high-energy electron diffraction (ARHEED) patterns from the surface exhibits a decorated hexagonal structure. This surface structure emerges from six epitaxial orientation domains/rods and each domain has a rectangular unit mesh of 3.94 ± 0.09 Å and 26.95 ± 1.16 Å along the [0 0 1] and [10] directions. The 26.95 Å is consistent with the unit mesh of the outermost layer of the Sb 2 Se 3 (1 2 0) domains/rods. Overall, our 2D map reveals surface information that are not easily observed by other diffraction techniques.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Unveiling the Role of In Situ Al 2 O 3 Passivation in Molecular-Ink-Processed CuIn(S,Se) 2 Photovoltaics

Here, we report on the optimization of in situ passivation of ink-based CuIn(S,Se) 2 thin-film solar cells via controlled incorporation of Al 2 O 3 in CuIn(S,Se) 2 films by the addition of Al(NO 3 ) 3 to the molecular ink precursor. For this purpose, the Al/(Al + In) (AAI) metal ratio was varied from 0.05 to 0.30. We observe that the efficiency of the cells made of Al 2 O 3 -incorporated CuIn(S,Se) 2 is consistently higher than those without Al 2 O 3 , especially due to an improvement in open-circuit voltage (V OC ) and fill factor (FF), for all tested AAI ratios. With an AAI of 0.05, a maximum efficiency of 11.2% and an average efficiency of 8.5% (measured across 18 cells) was achieved, compared to 8.5% maximum efficiency and 6.5% average efficiency for Al-free CuIn(S,Se) 2 . Furthermore, we find that cells made of Al 2 O 3 -incorporated CuIn(S,Se) 2 with an AAI of 0.2 show a narrow distribution in the photovoltaic performance, indicating higher reproducibility and higher FF. Energy-dispersive X-ray spectroscopy shows that, at AAI = 0.2, Al 2 O 3 is distributed more homogeneously at the surface of the Al 2 O 3 -incorporated CISSe. Capacitance-voltage measurements reveal a reduced defect density by incorporation of Al 2 O 3 , which could be partly responsible for the higher V OC . Furthermore, using detailed surface analysis with various X-ray and electron spectroscopy methods, we derive chemical and electronic structure information from the surface. With ultraviolet photoelectron (UPS) and inverse photoemission spectroscopies (IPES), the electronic band gap of the CuIn(S,Se) 2 thin-film surface is found to increase from 1.22 to 1.88 eV (+-0.12 eV) with Al 2 O 3 incorporation. This is accompanied by a clear reduction of the conduction band spike at the CdS/CISSe interface due to Al 2 O 3 addition, as derived by both UPS and IPES as well as temperature-dependent V OC measurements.

14 SOLAR ENERGY↗
DOE OSTI2021

Synthesis, structure, linear and nonlinear optical properties of noncentrosymmetric quaternary diamond-like semiconductors, Cu 2 ZnGeSe 4 (CZGSe) and the novel Cu 4 ZnGe 2 Se 7

In this work, two quaternary diamond-like semiconductors (DLSs) in the Cu-Zn-Ge-Se system, the known Cu 2 ZnGeSe 4 (also referred to as CZGSe) and the new Cu 4 ZnGe 2 Se 7 , are compared in terms of their crystal structures, electronic structures and physicochemical properties. Both compounds were prepared by high-temperature, solid-state synthesis at 800 degrees C. Single crystal X-ray diffraction was used to determine the structure of Cu 4 ZnGe 2 Se 7 . The structures of both Cu 2 ZnGeSe 4 and Cu 4 ZnGe 2 Se 7 can be considered as derivatives of cubic diamond. Cu 4 ZnGe 2 Se 7 , with a reduced symmetry due to the cation ordering pattern, adopts the Cu 4 NiSi 2 S 7 structure type, with space group C2. The corner-sharing tetrahedra in Cu 4 ZnGe 2 Se 7 are slightly distorted because the charge for some of the S 2 - anions is not compensated by the first-nearest-neighbor cations. Rietveld refinements using synchrotron X-ray powder diffraction data were used to assess the phase purity of the samples and confirm the bulk structural behavior. Diffuse reflectance UV/Vis/NIR spectroscopy shows that Cu 2 ZnGeSe 4 and Cu 4 ZnGe 2 Se 7 have direct optical bandgaps of 1.38 and 0.91 eV, respectively. Electronic structure calculations implementing density functional theory confirm the direct bandgap for Cu 4 ZnGe 2 Se 7 , with a calculated value of 0.62 eV. Both compounds are air stable, thermally stable up to relatively high temperatures, undergo phase transitions and have wide windows of optical clarity. The Kurtz-Perry powder technique was used to determine the second harmonic generation (SHG) responses using a commercial AgGaSe 2 standard. While Cu 4 ZnGe 2 Se 7 displays a weak SHG response, Cu 2 ZnGeSe 4 exhibits a response that is greater than several benchmark materials, with a large SHG coefficient, χ (2) , of 43 ± 6 pm/V at λ = 2900 nm.

36 MATERIALS SCIENCE↗
DOE OSTI2022

P-type conductivity in Sn-doped Sb 2 Se 3

Abstract Antimony selenide (Sb 2 Se 3 ) is a promising absorber material for thin-film photovoltaics. However, certain areas of fundamental understanding of this material remain incomplete and this presents a barrier to further efficiency gains. In particular, recent studies have highlighted the role of majority carrier type and extrinsic doping in drastically changing the performance of high efficiency devices (Hobson et al 2020 Chem. Mater. 32 2621–30). Herein, Sn-doped Sb 2 Se 3 bulk crystals are shown to exhibit p-type conductivity using Hall effect and hot-probe measurements. The measured conductivities are higher than those achieved through native defects alone, but with a carrier density (up to 7.4 × 10 14 cm −3 ) several orders of magnitude smaller than the quantity of Sn included in the source material. Additionally, a combination of ultraviolet, x-ray and hard x-ray photoemission spectroscopies are employed to obtain a non-destructive depth profile of the valence band maximum, confirming p-type conductivity and indicating a majority carrier type inversion layer at the surface. Finally, these results are supported by density functional theory calculations of the defect formation energies in Sn-doped Sb 2 Se 3 , showing a possible limit on the carrier concentration achievable with Sn as a dopant. This study sheds light on the effectiveness of Sn as a p-type dopant in Sb 2 Se 3 and highlights avenues for further optimisation of doped Sb 2 Se 3 for solar energy devices.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Growth of ultrathin Bi 2 Se 3 films by molecular beam epitaxy

Bi 2 Se 3 is a widely studied 3D topological insulator having potential applications in optics, electronics, and spintronics. When the thickness of these films decreases to less than approximately 6 nm, the top and bottom surface states couple, resulting in the opening of a small gap at the Dirac point. In the 2D limit, Bi 2 Se 3 may exhibit quantum spin Hall states. However, growing coalesced ultrathin Bi 2 Se 3 films with a controllable thickness and typical triangular domain morphology in the few nanometer range is challenging. Here, we explore the growth of Bi 2 Se 3 films having thicknesses down to 4 nm on sapphire substrates using molecular beam epitaxy that were then characterized with Hall measurements, atomic force microscopy, and Raman imaging. We find that substrate pretreatment—growing and decomposing a few layers of Bi 2 Se 3 before the actual deposition—is critical to obtaining a completely coalesced film. In addition, higher growth rates and lower substrate temperatures led to improvement in surface roughness, in contrast to what is observed for conventional epitaxy. Altogether, coalesced ultrathin Bi 2 Se 3 films with lower surface roughness enable thickness-dependent studies across the transition from a 3D-topological insulator to one with gapped surface states in the 2D regime.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Magnetic properties of ferrimagnetic Mn 3 Si 2 Se 6

The physical properties of Mn 3 Si 2 Se 6 have been investigated using single crystals grown by iodine-assisted vapor transport. Additionally, the material possesses a ferrimagnetic ground state and the properties are similar to those in the isostructural compound Mn 3 Si 2 Se 6 . Furthermore, in these trigonal materials, the dominant magnetic exchanges are antiferromagnetic and intrinsically frustrated, leading to a variety of competing ground states. In Mn 3 Si 2 Se 6 , the Curie temperature is TC = 67(1)K, which is slightly lower than that of Mn 3 Si 2 Se 6 where TC = 78K. The anisotropy field is also smaller in the selenide relative to the telluride. In both materials, short-range correlations likely exist well-above TC. Neutron single crystal diffraction data on Mn 3 Si 2 Se 6 suggest a collinear ferrimagnetic structure with the moments tilting out of the ab-plane in zero-field. Finally, the magnetization of vapor grown Mn 3 Si 2 Se 6 is shown for comparison; these vapor grown crystals do not show a sharp onset of magnetic anisotropy above 300K as was previously observed for melt grown Mn 3 Si 2 Se 6 crystals.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Band structure of Bi surfaces formed on Bi 2 Se 3 upon exposure to air

Bi 2 Se 3 has been the focus of intense interest over the past decade due to its topological properties. Bi surfaces are known to form on Bi 2 Se 3 upon exposure to atmosphere, but their electronic structure has not been investigated. Here, we report band structure measurements of such Bi surfaces using angle-resolved photoemission spectroscopy. Measured spectra can be well explained by the band structure of a single bilayer of Bi on Bi 2 Se 3 , and show that Bi surfaces consistently dominate the photoemission signal for air exposure times of at least 1 hour. These results demonstrate that atmospheric effects should be taken into consideration when identifying two-dimensional transport channels, and when designing surface-sensitive measurements of Bi 2 Se 3 , ideally limiting air exposure to no more than a few minutes.

36 MATERIALS SCIENCE↗