Soft modes in $ \mathcal{N} $ = 2 SYK model
We study various properties of the soft modes in the $ \mathcal{N} $ = 2 supersymmetric SYK model.
1/N expansion↗
SEARCH · Search NASA
Results for “Stefan model”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Eruption rate, area, and length relationships for some Hawaiian lava flows
The relationships between the morphological parameters of lava flows and the process parameters of lava composition, eruption rate, and eruption temperature were investigated using literature data on Hawaiian lava flows. Two simple models for lava flow heat loss by Stefan-Boltzmann radiation were employed to derive eruption rate versus planimetric area relationship. For the Hawaiian basaltic flows, the eruption rate is highly correlated with the planimetric area. Moreover, this observed correlation is superior to those from other obvious combinations of eruption rate and flow dimensions. The correlations obtained on the basis of the two theoretical models, suggest that the surface of the Hawaiian flows radiates at an effective temperature much less than the inner parts of the flowing lava, which is in agreement with field observations. The data also indicate that the eruption rate versus planimetric area correlations can be markedly degraded when data from different vents, volcanoes, and epochs are combined.
Pieri, David C.↗
Automatic determination of fault effects on aircraft functionality
The problem of determining the behavior of physical systems subsequent to the occurrence of malfunctions is discussed. It is established that while it was reasonable to assume that the most important fault behavior modes of primitive components and simple subsystems could be known and predicted, interactions within composite systems reached levels of complexity that precluded the use of traditional rule-based expert system techniques. Reasoning from first principles, i.e., on the basis of causal models of the physical system, was required. The first question that arises is, of course, how the causal information required for such reasoning should be represented. The bond graphs presented here occupy a position intermediate between qualitative and quantitative models, allowing the automatic derivation of Kuipers-like qualitative constraint models as well as state equations. Their most salient feature, however, is that entities corresponding to components and interactions in the physical system are explicitly represented in the bond graph model, thus permitting systematic model updates to reflect malfunctions. Researchers show how this is done, as well as presenting a number of techniques for obtaining qualitative information from the state equations derivable from bond graph models. One insight is the fact that one of the most important advantages of the bond graph ontology is the highly systematic approach to model construction it imposes on the modeler, who is forced to classify the relevant physical entities into a small number of categories, and to look for two highly specific types of interactions among them. The systematic nature of bond graph model construction facilitates the process to the point where the guidelines are sufficiently specific to be followed by modelers who are not domain experts. As a result, models of a given system constructed by different modelers will have extensive similarities. Researchers conclude by pointing out that the ease of updating bond graph models to reflect malfunctions is a manifestation of the systematic nature of bond graph construction, and the regularity of the relationship between bond graph models and physical reality.
Feyock, Stefan↗
Radon measurements aboard the Kuiper Airborne Observatory
We have carried out three (piggyback) radon-related projects aboard the KAO. The first, which was limited to upper tropospheric measurements while in level flight, revealed the systematic occurrence of unexpectedly high radon concentrations in this region of the atmosphere. The second project was an instrument development project, which led to the installation of an automatic radon measurement system aboard the NASA ER-2 High Altitude Research Aircraft. In the third, we installed a new system capable of collecting samples during the normal climb and descent of the KAO. The results obtained in these projects have resulted in significant contributions to our knowledge of atmospheric transport processes, and are currently playing a key role in the validation of global circulation and transport models.
Kritz, Mark A.↗
Model Based Inference for Wire Chafe Diagnostics
Presentation for Aging Aircraft conference covering chafing fault diagnostics using Time Domain Reflectometry. Laboratory setup and experimental methods are presented, along with initial results that summarize fault modeling and detection capabilities.
Schuet, Stefan R.↗
Prediction-Based Approaches for Generation of Noise-Power-Distance Data with Application to Urban Air Mobility Vehicles
In contrast to most commercial air traffic today, vehicles serving the urban air mobility (UAM) market are anticipated to operate within communities and be close to the public at large. The approved model for assessing environmental impact of air traffic actions in the United States, the Federal Aviation Administration (FAA) Aviation Environmental Design Tool (AEDT), does not directly support analysis of such operations due to a combined lack of UAM aircraft flight performance model data and aircraft noise data. This paper addresses the latter by offering two prediction-based approaches for generation of noise-power-distance (NPD) data for use within AEDT. One utilizes AEDT’s fixed-wing aircraft modeling approach and the other utilizes the rotary-wing aircraft modeling approach.
noise-power-distance↗
Prediction of Noise-Power-Distance Data for Urban Air Mobility Vehicles
In contrast to most commercial air traffic today, vehicles serving the urban air mobility (UAM) market are anticipated to operate within communities and be close to the public at large. The approved model for assessing environmental impact of air traffic actions in the United States, the Federal Aviation Administration (FAA) Aviation Environmental Design Tool (AEDT), does not directly support analysis of such operations due to a combined lack of UAM aircraft flight performance model data and aircraft noise data. This paper addresses the latter by offering two prediction-based approaches for generation of noise-power-distance (NPD) data for use within AEDT. One utilizes the AEDT fixed-wing aircraft modeling approach and the other utilizes the AEDT rotary-wing aircraft modeling approach.
noise-power-distance↗
Parametric Modeling and Economic Analysis of a 2MW th 3-Stream sCO 2 Heat Exchanger
Here, this paper presents the design and cost optimization of a novel 2MW th 3-stream sCO2 plate-fin heat exchanger. This heat exchanger design is unique in that it uses reduced metal oxide particle-to-sCO2 heat exchanger for cost-effective energy storage applications. The design uses low velocity, laminar air as the re-oxidizing reactant to transfer the heat of the re-oxidizing reaction to a sCO2 power loop. The design of the heat exchanger is based on a 2-D, 3-fluid plate/fin heat transfer model. The model parameterizes the size, shape, and number of passages of the heat exchanger to calculate the temperature profile, pressure drop, and fluid velocities of all three fluids. Global heat exchanger parameters such as the effectiveness and total heat transferred to the sCO2 are then calculated for overall performance. Due to the value and increased use of sCO2 heat exchangers in power cycles, a cost model of the system based on the unique high temperature/high pressure operating conditions was created using quotes from reference projects and market analysis. These quoted air-to-sCO2 heat exchangers are then processed using multiple weighting factors pertinent to heat exchanger design, including heat exchanger type, maximum temperature, differential pressures, fluids, duty, and more. These factors are then used in an exponential function in order to generate a parameterized cost curve. The design and cost of the heat exchanger are then optimized using the SMPSO genetic algorithm in Python. The optimization objectives for the system are to maximize the overall system effectiveness, including an air recuperator for preheating, and to minimize unit costs. Additional constraints are added to the system for the sCO2 and air pressure drops, air velocity to reduce particle entrainment, and the length and volume of the heat exchanger.
Cost Model↗
Enabling in-time Prognostics with Surrogate Modeling through Physics-enhanced Dynamic Mode Decomposition Method
Computational models provide essential quantitative tools for assessing and predicting the health and performance of physical systems. However, high-fidelity models are rarely used in real-time operations or large optimization loops, due to their time-intensive nature. A common approach to improving computational efficiency of prognosis is to employ surrogate models. Such models can significantly decrease computation time for some accuracy loss. In this context, use of Dynamic Mode Decomposition (DMD) is proposed to generate surrogate models for lithium-ion (Li-ion) battery discharge. DMD has been suggested and used successfully in the area of fluid dynamics for over a decade, but it has not been applied to the PHM domain, where far-ahead prediction of nonlinear behavior is crucial to propagate faults or predict Remaining Useful Life (RUL). For Li-ion battery health management, the standard application of DMD using only the observable quantities of interest was unable to capture the nonlinear discharge of batteries exhibited in lab testing. The Koopman theory, however, provides a mechanism to tradeoff low dimensional nonlinear models with high-dimensional linear ones in a DMD framework, by augmenting nonlinear state variables into the system representation. In this way, DMD allows for configurable simulation accuracy dependent on the dimensionality of the Koopman operator. For battery health management, we augmented the observable variables with the hidden states of a higher-fidelity physics model to build the DMD surrogate. In comparison to a high-fidelity model, the surrogate improved computational efficiency with only a minimal loss of accuracy, and enabled long-term prognostics horizons. A generalized method for this was implemented in the prog models python package.
prognostics and health management↗
Use-Inspired, Process-Oriented GCM Selection: Prioritizing Models for Regional Dynamical Downscaling
Dynamical downscaling is a crucial process for providing regional climate information for broad uses, using coarser-resolution global models to drive higher-resolution regional climate simulations. The pool of global climate models (GCMs) providing the fields needed for dynamical downscaling has increased from the previous generations of the Coupled Model Intercomparison Project (CMIP). However, with limited computational resources, the need for prioritizing the GCMs for subsequent downscaling studies remains. GCM selection for dynamical downscaling should focus on evaluating processes relevant for providing boundary conditions to the regional models and be inspired by regional uses such as the response of extremes to changes in the boundary conditions. This leads to the need for metrics representing processes of relevance to diverse stakeholders and subregions of a domain. Procedures to account for metric redundancy and the statistical distinguishability of GCM rankings are required. Further, procedures for selecting realizations from ensembles of top-performing GCM simulations can be used to span the range of climate change signals in multiple ways. As a result, distinct weighting of metrics and prioritization of particular realizations may depend on user needs. We provide high-level guidelines for such region-specific evaluations and address how CMIP7 might enable dynamical downscaling of a representative sample of high-quality models across representative shared socioeconomic pathways (SSPs).
54 ENVIRONMENTAL SCIENCES↗
Boundary layer description of directional polymer crystallisation
Nearly fifty years ago Lovinger and Gryte suggested that the directional crystallization of a polymer was analogous to the quiescent isothermal crystallization experiment but at a supercooling where the crystal growth velocity was equal to the velocity of the moving front. Our experiments showed that this equivalence holds in a detailed manner at low directional velocities. To understand the underlying physics of these situations, we modeled the motion of a crystallization front in a liquid where the left side boundary is suddenly lowered below the melting point (Stefan's problem) but with the modification that the crystallization kinetics follow a version of the Avrami model. Our numerical results surprisingly showed that the results of the polymer analog track with the Stefan results which were derived for a simple liquid that crystallizes completely at its melting point; in particular, the position of the crystal growth-front evolved with time exactly as in the Stefan problem. The numerical solution also showed that the temperature in the immediate vicinity of the growth-front decreased with increasing front velocity, which is in line with Lovinger and Gryte's ansatz. To provide a clear theoretical understanding of these numerical results we derive a boundary layer solution to the governing coupled differential equations of the polymer problem. The analytical results are in agreement with our observations from experiments and numerical computations but show that this equivalence between the small molecule and polymer analog only holds in the limit where the crystallization enthalpy is much larger than the rate at which heat is conducted away in the polymer. In particular, in the context of the temperature profile, the enthalpy generated by the crystallisation process which is spread out over a narrow spatial region can be approximated as a point source whose location and temperature correspond to the Lovinger–Gryte ansatz.
36 MATERIALS SCIENCE↗
Automated Model Selection for Gate Set Tomography
Explore the source record for details and available documents.
Seritan, Stefan Kelley↗
Uncertainty quantification in breakup reactions
Breakup reactions are one of the favored probes to study loosely bound nuclei, particularly those in the limit of stability forming a halo. In order to interpret such breakup experiments, the continuum discretized coupled channel method is typically used. In this study, the first Bayesian analysis of a breakup reaction model is performed. Herein we use a combination of statistical methods together with a three-body reaction model (the continuum discretized coupled channel method) to quantify the uncertainties on the breakup observables due to the parameters in the effective potential describing the loosely bound projectile of interest. The combination of tools we develop opens the path for a Bayesian analysis of not only breakup processes, but also a wide array of complex processes that require computationally intensive reaction models.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
Sequential Bayesian Experimental Design for Calibration of Expensive Simulation Models
Simulation models of critical systems often have parameters that need to be calibrated using observed data. For expensive simulation models, calibration is done using an emulator of the simulation model built on simulation output at different parameter settings. Using intelligent and adaptive selection of parameters to build the emulator can drastically improve the efficiency of the calibration process. The article proposes a sequential framework with a novel criterion for parameter selection that targets learning the posterior density of the parameters. The emergent behavior from this criterion is that exploration happens by selecting parameters in uncertain posterior regions while simultaneously exploitation happens by selecting parameters in regions of high posterior density. Furthermore, the advantages of the proposed method are illustrated using several simulation experiments and a nuclear physics reaction model.
97 MATHEMATICS AND COMPUTING↗
Cirrus Cloud Radiative and Microphysical Properties from Ground Observations and In Situ Measurements During FIRE 1991 and Their Application to Exhibit Problems in Cirrus Solar Radiative Transfer Modeling
Measurements from the FIRE 1991 cirrus cloud field experiment in the central United States are presented and analyzed. The first part focuses on cirrus microphysical properties. Aircraft 2D-probe in situ data at different cloud altitudes were evaluated for cirrus cases on four different days. Also presented are simultaneous data samples from balloonborne videosondes. Only these balloonsondes could detect the smaller crystals. Their data suggest (at least for midlatitude altitudes below 10 km) that ice crystals smaller than 15 microns in size are rare and that small ice crystals not detected by 2D-probe measurements are radiatively of minor importance, as overlooked 2D-probe crystals account for about 10% of the total extinction. The second part focuses on the link between cirrus cloud properties and radiation. With cloud macrophysical properties from surface remote sensing added to the microphysical data and additional radiation measurements at the surface, testbeds for radiative transfer models were created. To focus on scattering processes, model evaluations were limited to the solar radiative transfer by comparing calculated and measured transmissions of sunlight at the surface. Comparisons under cloud-free conditions already reveal a model bias of about +45 W/sq m for the hemispheric solar downward broadband flux. This discrepancy, which is (at least in part) difficult to explain, has to be accounted for in comparisons involving clouds. Comparisons under cirrus cloud conditions identify as the major obstacle in cirrus solar radiative transfer modeling the inability of one-dimensional radiative transfer models to account for horizontal inhomogeneities. The successful incorporation of multidimensional radiative transfer effects will depend not only on better models but critically on the ability to measure and to define characteristic inhomogeneity scales of cloud fields. The relative minor error related to the microphysical treatment is in part a reflection of the improved understanding on solar scattering on ice crystals over the last decade and of the available wealth on ice-crystal size and shape data for this study. In absence of this information, uncertainties from microphysical cirrus model assumptions will remain high.
Kinne, Stefan↗
Investigations of Fluid-Structure-Coupling and Turbulence Model Effects on the DLR Results of the Fifth AIAA CFD Drag Prediction Workshop
The accurate calculation of aerodynamic forces and moments is of significant importance during the design phase of an aircraft. Reynolds-averaged Navier-Stokes (RANS) based Computational Fluid Dynamics (CFD) has been strongly developed over the last two decades regarding robustness, efficiency, and capabilities for aerodynamically complex configurations. Incremental aerodynamic coefficients of different designs can be calculated with an acceptable reliability at the cruise design point of transonic aircraft for non-separated flows. But regarding absolute values as well as increments at off-design significant challenges still exist to compute aerodynamic data and the underlying flow physics with the accuracy required. In addition to drag, pitching moments are difficult to predict because small deviations of the pressure distributions, e.g. due to neglecting wing bending and twisting caused by the aerodynamic loads can result in large discrepancies compared to experimental data. Flow separations that start to develop at off-design conditions, e.g. in corner-flows, at trailing edges, or shock induced, can have a strong impact on the predictions of aerodynamic coefficients too. Based on these challenges faced by the CFD community a working group of the AIAA Applied Aerodynamics Technical Committee initiated in 2001 the CFD Drag Prediction Workshop (DPW) series resulting in five international workshops. The results of the participants and the committee are summarized in more than 120 papers. The latest, fifth workshop took place in June 2012 in conjunction with the 30th AIAA Applied Aerodynamics Conference. The results in this paper will evaluate the influence of static aeroelastic wing deformations onto pressure distributions and overall aerodynamic coefficients based on the NASA finite element structural model and the common grids.
Keye, Stefan↗
Estimation of Key Sunquake Parameters through Hydrodynamic Modeling and Cross-correlation Analysis
Explore the source record for details and available documents.
John T. Stefan↗
Fluid Dynamics and Thermodynamics of Vapor Phase Crystal Growth
The ground-based research effort under this program is concerned with systematic studies of the effects of variations: (1) of the relative importance of buoyancy-driven convection, and (2) of diffusion and viscosity conditions on crystal properties. These experimental studies are supported by thermodynamic characterizations of the systems, based on which fluid dynamic parameters can be determined. The specific materials under investigation include: the GeSe-GeI4, Ge-GeI4, HgTe-HgI2, and Hg sub (1-x)Cd sub (x) Te-HgI2 systems. Mass transport rate studies of the GeSe-GeI system as a function of orientation of the density gradient relative to the gravity vector demonstrated the validity of flux anomalies observed in earlier space experiments. The investigation of the effects of inert gases on mass flux yielded the first experimental evidence for the existence of a boundary layer in closed ampoules. Combined with a thorough thermodynamic analysis, a transport model for diffusive flow including chemical vapor transport, sublimation, and Stefan flow was developed.
Wiedemeier, H.↗