Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural variant”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Conformal PICA TPS– Enabling Future Nasa Planetary Science Missions

Initial development of conformal PICA (C-PICA) ablative TPS occurred under NASA’s Hypersonics Project in the 2000’s and demonstrated very low through the thickness conductivity compared to state-of-the-art PICA. PICA, which was first demonstrated on Stardust, has some inherent limitations that C-PICA improves on, primarily strain to failure. More recently C-PICA has been further matured and a family of C-PICA materials are now ready for consideration as an enabling technology for New Frontiers and other NASA missions. C-PICA has several improvements compared to PICA including: - Higher strain to failure and lower thermal conductivity (up to 55% less than PICA depending on C-PICA variant) - CTE comparable to typical composite carrier structures - Temperature independent mechanical properties - Suited for single piece (up to ~ 1.5m) or tiled configurations - Larger tiles leading to reduced integration complexity compared to tiled PICA - Reduced mass compared to PICA due to reduced thermal conductivity C-PICA has been tested at heating fluxes ranging from 250-1850 W/cm2 with excellent performance. Based on our evaluation, multiple missions listed on the SMD Technology Showcase will potentially need a thermal protection system capable of withstanding entry environments where C-PICA is suited either as a forebody or backshell TPS. We will be highlighting mature conformal PICA variants to support the following missions at the showcase in January 2023.

thermal protection↗
NASA NTRS1976

Structural design studies of a supersonic cruise arrow wing configuration

Structural member cross sections were sized with a system of integrated computer programs to satisfy strength and flutter design requirements for several variants of the arrow wing supersonic cruise vehicle. The resulting structural weights provide a measure of the structural efficiency of the planform geometry, structural layout, type of construction, and type of material including composites. The material distribution was determined for a baseline metallic structure and the results indicate that an approximate fatigue constraint has an important effect on the structural weight required for strength but, in all cases, additional material had to be added to satisfy flutter requirements with lighter mass engines with minimum fuel onboard. The use of composite materials on the baseline configuration was explored and indicated increased structural efficiency. In the strength sizing, the all-composite construction provided a lower weight design than the hybrid construction which contained composites only in the wing cover skins. Subsequent flutter analyses indicated a corresponding lower flutter speed.

Sobieszczanski, J.↗
NASA NTRS1992

Identification of time-varying structural dynamic systems - An artificial intelligence approach

An application of the artificial intelligence-derived methodologies of heuristic search and object-oriented programming to the problem of identifying the form of the model and the associated parameters of a time-varying structural dynamic system is presented in this paper. Possible model variations due to changes in boundary conditions or configurations of a structure are organized into a taxonomy of models, and a variant of best-first search is used to identify the model whose simulated response best matches that of the current physical structure. Simulated model responses are verified experimentally. An output-error approach is used in a discontinuous model space, and an equation-error approach is used in the parameter space. The advantages of the AI methods used, compared with conventional programming techniques for implementing knowledge structuring and inheritance, are discussed. Convergence conditions and example problems have been discussed. In the example problem, both the time-varying model and its new parameters have been identified when changes occur.

Glass, B. J.↗
NASA NTRS1979

Investigations on the hierarchy of reference frames in geodesy and geodynamics

Problems related to reference directions were investigated. Space and time variant angular parameters are illustrated in hierarchic structures or towers. Using least squares techniques, model towers of triads are presented which allow the formation of linear observation equations. Translational and rotational degrees of freedom (origin and orientation) are discussed along with and the notion of length and scale degrees of freedom. According to the notion of scale parallelism, scale factors with respect to a unit length are given. Three-dimensional geodesy was constructed from the set of three base vectors (gravity, earth-rotation and the ecliptic normal vector). Space and time variations are given with respect to a polar and singular value decomposition or in terms of changes in translation, rotation, deformation (shear, dilatation or angular and scale distortions).

Grafarend, E. W.↗
NASA NTRS1993

Conceptual design of a device to measure hand swelling in a micro-gravity environment

In the design of pressurized suits for use by astronauts in space, proper fit is an important consideration. One particularly difficult aspect of the suit design is the design of the gloves. If the gloves of the suit do not fit properly, the grip strength of the astronaut can be decreased by as much as fifty percent. These gloves are designed using an iterative process and can cost over 1.5 million dollars. Glove design is further complicated by the way the body behaves in a micro-gravity environment. In a micro-gravity setting, fluid from the lower body tends to move into the upper body. Some of this fluid collects in the hands and causes the hands to swell. Therefore, a pair of gloves that fit well on earth may not fit well when they are used in space. The conceptual design process for a device which can measure the swelling that occurs in the hands in a micro-gravity environment is described. This process involves developing a specifications list and function structure for the device and generating solution variants for each of the sub functions. The solution variants are then filtered, with the variants that violate any of the specifications being discarded. After acceptable solution variants are obtained, they are combined to form design concepts. These design concepts are evaluated against a set of criteria and the design concepts are ranked in order of preference. Through this process, the two most plausible design concepts were an ultrasonic imaging technique and a laser mapping technique. Both of these methods create a three dimensional model of the hand, from which the amount of swelling can be determined. In order to determine which of the two solutions will actually work best, a further analysis will need to be performed.

Hysinger, Christopher L.↗
NASA NTRSDate not supplied

Conformal PICA TPS– Enabling Future Nasa Planetary Science Missions

Initial development of Conformal Phenolic Impregnated Carbon Ablator (C-PICA) ablative TPS occurred under NASA’s Hypersonics Project in the 2000’s and demonstrated very low through-the-thickness thermal conductivity compared to state-of-the-art Phenolic Impregnated Carbon Ablator (PICA). PICA, which was first demonstrated on Stardust, has some inherent limitations that C-PICA improves on, primarily strain to failure. More recently C-PICA has been further matured and a family of C-PICA materials are now ready for consideration as an enabling technology for New Frontiers and other NASA missions. C-PICA has several improvements compared to PICA including: - Higher strain to failure and lower thermal conductivity (up to 55% less than PICA depending on C-PICA variant) - CTE comparable to typical composite carrier structures and also suitable for metallic substructures given high strain to failure - Temperature independent mechanical properties - Suited for single piece (up to ~ 1.5m) or tiled configurations - Larger tiles leading to reduced integration complexity compared to tiled PICA - Reduced mass compared to PICA due to reduced thermal conductivity C-PICA has been tested at heat fluxes ranging from 250-1850 W/cm^2, and shear pressures of 200Pa at 400W/cm^2 with excellent performance. Expertise on manufacturing and integration of C-PICA reside at NASA, and NASA can transition the technology to interested parties via technology transfer.

thermal protection↗
NASA NTRS1995

Coronal roots of solar wind streams: 3-D MHD modeling

Weak (discontinuous) solutions of the 3-D MHD equations look like a promising tool to model the transonic solar wind with structural elements: current sheets, coronal plumes etc. Using the observational information about various coronal emissions one can include these structural elements into the 3-D MHD solar wind model by embedding the discontinuities of given type. Such 3-D MHD structured solar wind is calculated self-consistently: variants are examined via numerical experiments. In particular, the behavior of coronal plumes in the transonic solar wind flow, is modeled. The input information for numerical modeling (for example, the magnetic field map at the very base of the solar corona) can be adjusted so that fast stream arises over the center of the coronal hole, over the coronal hole boundaries and, even, over the region with closed magnetic topology. 3-D MHD equations have the analytical solution which can serve as a model of supersonic trans-alfvenic solar wind in the (5-20) solar radii heliocentric distance interval. The transverse, nonradial total (gas + magnetic field) pressure balance in the flow is the corner-stone of this solution. The solution describes the filamentation (ray-like structure of the solar corona) and streaming (formation of high-speed streams with velocities up to 800 km/sec) as a consequence of the magnetic field spatial inhomogeneous structure and trans-alfvenic character of the flow. The magnetic field works in the model as a 'controller' for the solar wind streaming and filamentation.

Pisanko, Yu. V.↗
NASA NTRS1974

COMOC: Three dimensional boundary region variant, theoretical manual and user's guide

The theoretical and mechanical structure of the computer program is presented along with guidance on adaptation of the code to solution of a particular problem. Sample solutions are discussed for several problems, especially with respect to solution accuracy and speed as a function of parameters under control of the user. Construction of input data decks for sample problems is discussed.

Baker, A. J.↗
NASA NTRSDate not supplied

Deciphering Extreme Mineral Records; Microstructural Phase Heritage of Shocked Materials

High-pressure minerals such as coesite, stishovite, and reidite are often used as indicators of shock metamorphism. However, high-pressure and high-temperature phases are metastable at ambient conditions and, therefore, often revert to a more energetically favorable phase. During solid-state transformations, the crystallographic orientations of the stable polymorph are controlled by the transformation pathway from the parent. Microstructural orientation analysis using electron backscatter diffraction (EBSD) of the stable phase can reveal systematic intercrystalline orientation relationships (OR) diagnostic of solid-state transformations from these high-pressure or high-temperature polymorph phases (Cayron et al., 2006). Knowledge of polymorph stability fields for a given system can thus be used to infer minimum shock P and/or T conditions that rocks have experienced, which are otherwise unavailable using traditional thermobarometers such as element partition coefficients. Using orientation relationships to infer the former presence of mineral phases has been termed microstructural “phase heritage”, and has successfully been used to probe for evidence of extreme pressures and temperatures resulting from hypervelocity impacts. The reconstruction of polymorphs of ZrSiO4 (zircon, reidite) and ZrO2 (baddeleyite) have further elucidated the behavior of these phases under hypervelocity impact conditions (Timms et al., 2017a; White et al., 2018), and OR analysis of shocked monazite has identified a previously unrecognized tetragonal high-P polymorph (Erickson et al., 2019). Zircon will convert to the low tetragonal polymorph reidite at shock stresses above ~21 GPa. However, upon decompression at temperatures above 1200 °C reidite will revert to zircon (Kusaba et al., 1985). Recrystallized zircon neoblasts encased in impact melt often show systematic misorientation relationships of 90° about <110> indicative of reversion from the reidite (Fig. 1), and preserving cryptic evidence of the high-P history that is often erased by the post shock thermal spike (Cavosie et al., 2016). Microstructural OR analysis of a dissociated zircon corona composed of baddeleyite (monoclinic-ZrO2) has identified the former presence of cubic zirconia within impact melt glass from the Mistastin Lake impact structure, Labrador, CA. Based on stability fields in the ZrO2-SiO2 binary phase diagram, cubic zirconia records thermal conditions in excess of 2370 °C at ambient P, indicating that the Mistastin impact melt is the hottest rock identified on Earth’s surface (Timms et al., 2017b). Shock-deformed monazite (monoclinic La,Ce,ThPO4) containing lamellae comprised of interlocking laths has been identified from the Haughton Dome impact structure, Nunavut, Canada and Nördlinger-Ries Crater, southern Germany. The lath-structured lamellae are composed of four systematic orientation variants, which OR analyses indicate originate from a tetragonal parent whereby the [010]monoclinic aligns with either [100] or [010]tetragonal (Erickson et al., 2019). These results highlight utility of microstructural phase heritage analyses for the identification of unstable high-P or high-T polymorphs that uniquely record the extremely transient shock conditions produced by hypervelocity impacts.

Timmons Erickson↗
NASA NTRS2003

Common 5S rRNA variants are likely to be accepted in many sequence contexts

Over evolutionary time RNA sequences which are successfully fixed in a population are selected from among those that satisfy the structural and chemical requirements imposed by the function of the RNA. These sequences together comprise the structure space of the RNA. In principle, a comprehensive understanding of RNA structure and function would make it possible to enumerate which specific RNA sequences belong to a particular structure space and which do not. We are using bacterial 5S rRNA as a model system to attempt to identify principles that can be used to predict which sequences do or do not belong to the 5S rRNA structure space. One promising idea is the very intuitive notion that frequently seen sequence changes in an aligned data set of naturally occurring 5S rRNAs would be widely accepted in many other 5S rRNA sequence contexts. To test this hypothesis, we first developed well-defined operational definitions for a Vibrio region of the 5S rRNA structure space and what is meant by a highly variable position. Fourteen sequence variants (10 point changes and 4 base-pair changes) were identified in this way, which, by the hypothesis, would be expected to incorporate successfully in any of the known sequences in the Vibrio region. All 14 of these changes were constructed and separately introduced into the Vibrio proteolyticus 5S rRNA sequence where they are not normally found. Each variant was evaluated for its ability to function as a valid 5S rRNA in an E. coli cellular context. It was found that 93% (13/14) of the variants tested are likely valid 5S rRNAs in this context. In addition, seven variants were constructed that, although present in the Vibrio region, did not meet the stringent criteria for a highly variable position. In this case, 86% (6/7) are likely valid. As a control we also examined seven variants that are seldom or never seen in the Vibrio region of 5S rRNA sequence space. In this case only two of seven were found to be potentially valid. The results demonstrate that changes that occur multiple times in a local region of RNA sequence space in fact usually will be accepted in any sequence context in that same local region.

NASA Discipline Exobiology↗
NASA NTRS1978

Development of methodology for optimum design of structures at elevated temperatures

This paper surveys a number of activities aimed at applying optimum design techniques to structures where high temperatures are important design considerations. An improved variant of fully-stressed design (FSD), denoted thermal fully-stressed design (TFSD), is described which converges significantly faster than FSD for problems where thermal stresses are comparable in magnitude to mechanical stresses. Second, an optimality criterion is described for sizing structures subjected to temperature constraints. Simultaneous requirements on strength and temperatures are handled by two different techniques: (1) a state-of-the-art mathematical programming method and (2) the optimality criterion technique for temperature constraints combined with FSD for strength constraints. A method is described to optimize the insulation and ply thicknesses of an insulated composite panel with a time-varying temperature applied to the outer surface of the insulation and a general set of in-plane loads applied to the panel.

Adelman, H. M.↗
NASA NTRS2004

Progressive Response Surfaces

Response surface functions are often used as simple and inexpensive replacements for computationally expensive computer models that simulate the behavior of a complex system over some parameter space. Progressive response surfaces are ones that are built up progressively as global information is added from new sample points in the parameter space. As the response surfaces are globally upgraded based on new information, heuristic indications of the convergence of the response surface approximation to the exact (fitted) function can be inferred. Sampling points can be incrementally added in a structured fashion, or in an unstructured fashion. Whatever the approach, at least in early stages of sampling it is usually desirable to sample the entire parameter space uniformly. At later stages of sampling, depending on the nature of the quantity being resolved, it may be desirable to continue sampling uniformly over the entire parameter space (Progressive response surfaces), or to switch to a focusing/economizing strategy of preferentially sampling certain regions of the parameter space based on information gained in early stages of sampling (Adaptive response surfaces). Here we consider Progressive response surfaces where a balanced indication of global response over the parameter space is desired.We use a variant of Moving Least Squares to fit and interpolate structured and unstructured point sets over the parameter space. On a 2-D test problem we compare response surface accuracy for three incremental sampling methods: Progressive Lattice Sampling; Simple-Random Monte Carlo; and Halton Quasi-Monte-Carlo sequences. We are ultimately after a system for constructing efficiently upgradable response surface approximations with reliable error estimates.

Romero, V. J.↗
NASA NTRS1992

Design of a radiator shade for testing in a simulated lunar environment

The National Aeronautics and Space Administration (NASA) and The Universities Space Research Association (USRA) have chosen the parabolic/catenary concept from their sponsored Fall 1991 lunar radiation shade project for further testing and development. NASA asked the design team to build a shading device and support structure for testing in a vacuum chamber. Besides the support structure for the catenary shading device, the design team was asked to develop a system for varying the shade shape so that the device can be tested at different focal lengths. The design team developed concept variants and combined the concept variants to form overall designs. Using a decision matrix, an overall design was selected by the team from several overall design alternatives. Concept variants were developed for three primary functions. The three functions were structural support, shape adjustments, and end shielding. The shade adjustment function was divided into two sub-functions, arc length adjustment, and width adjustment.

Huff, Jaimi↗
NASA NTRS1985

Partitioning problems in parallel, pipelined and distributed computing

The problem of optimally assigning the modules of a parallel program over the processors of a multiple computer system is addressed. A Sum-Bottleneck path algorithm is developed that permits the efficient solution of many variants of this problem under some constraints on the structure of the partitions. In particular, the following problems are solved optimally for a single-host, multiple satellite system: partitioning multiple chain structured parallel programs, multiple arbitrarily structured serial programs and single tree structured parallel programs. In addition, the problems of partitioning chain structured parallel programs across chain connected systems and across shared memory (or shared bus) systems are also solved under certain constraints. All solutions for parallel programs are equally applicable to pipelined programs. These results extend prior research in this area by explicitly taking concurrency into account and permit the efficient utilization of multiple computer architectures for a wide range of problems of practical interest.

Bokhari, S.↗
NASA NTRS1988

Partitioning problems in parallel, pipelined, and distributed computing

The problem of optimally assigning the modules of a parallel program over the processors of a multiple-computer system is addressed. A sum-bottleneck path algorithm is developed that permits the efficient solution of many variants of this problem under some constraints on the structure of the partitions. In particular, the following problems are solved optimally for a single-host, multiple-satellite system: partitioning multiple chain-structured parallel programs, multiple arbitrarily structured serial programs, and single-tree structured parallel programs. In addition, the problem of partitioning chain-structured parallel programs across chain-connected systems is solved under certain constraints. All solutions for parallel programs are equally applicable to pipelined programs. These results extend prior research in this area by explicitly taking concurrency into account and permit the efficient utilization of multiple-computer architectures for a wide range of problems of practical interest.

Bokhari, Shahid H.↗
NASA NTRS1996

Using BEEM To Probe Strains In Semiconductors

Ballistic-electron-emission microscopy (BEEM) useful in determining strains in semiconductors under some conditions. More specifically, BEEM is variant of scanning tunneling microscopy and sensitive to electronic structure of probed material. In present approach, BEEM used to obtain data on those aspects of variations in electronic structures related to variations in strains. Then by use of mathematical modeling of relationships between electronic structures and strains, variations in strains deduced from BEEM data.

Bell, L. Douglas↗
NASA NTRS1988

Electron Diffraction Evidence for the Ordering of Excess Nickel Atoms by Relation to Stoichiometry in Nickel-Rich Beta'-Nial Formation of a Nickel-Aluminum (Ni2al) Superlattices

In electron diffraction patterns of nickel-rich beta-NiAl alloys, many anomalies are observed. One of these is the appearance of diffuse intensity maxima between the reflexions of the B2 structure. This is explained by the short-range ordering of the excess nickel atoms on the simple cubic sublattice occupied only by aluminum atoms in the stoichiometric, perfectly ordered NiAl alloy. After annealing Ni 37.5 atomic percent Al and Ni 37.75 atomic percent Al for 1 week at 300 and 400 C, the diffuse intensity maxima transformed into sharp superstructure reflexions. These reflexions are explained by the formation of the four possible variants of an ordered hexagonal superstructure corresponding to the Ni2Al composition. This structure is closely related to the Ni2Al3 structure (same space group) formed by the ordering of vacancies on the nickel sublattice in aluminum-rich beta-NiAl alloys.

Reynaud, F.↗
NASA NTRS1993

Adjustable lossless image compression based on a natural splitting of an image into drawing, shading, and fine-grained components

The compression, or efficient coding, of single band or multispectral still images is becoming an increasingly important topic. While lossy compression approaches can produce reconstructions that are visually close to the original, many scientific and engineering applications require exact (lossless) reconstructions. However, the most popular and efficient lossless compression techniques do not fully exploit the two-dimensional structural links existing in the image data. We describe here a general approach to lossless data compression that effectively exploits two-dimensional structural links of any length. After describing in detail two main variants on this scheme, we discuss experimental results.

Novik, Dmitry A.↗