Is it worth generating energy with garbage? Defining a carbon tax to encourage waste-to-energy cycles
Not Available
Mollica, Gustavo José Gonçalves↗
SEARCH · Search NASA
Results for “Waste to energy”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Introducing Small Scale Waste-to-Energy Technology in Microgrids (Cooperative Research and Development Final Report, CRADA Number CRD-17-00703)
Cogent has developed an innovative, proprietary waste-to-energy (WTE) system, the HelioStorm(TM) Gasifier, capable of efficiently operating on small amounts of heterogeneous municipal solid waste feedstocks, converting them into a clean syngas that can be used to fuel an electricity generator, all with rapid on/off cycle times. NREL will work with Cogent to complete a computer simulation of an integrated HelioStorm(TM) plasma gasifier system and dual fuel diesel generator. Cogent will test the performance of an actual HelioStorm(TM) WTE system and dual fuel diesel generator at their test facility using steady state electrical loads and provide a report describing the performance of the integrated system.
09 BIOMASS FUELS↗
Engineering-Scale Testing of the Biphasic Solvent Based CO 2 Absorption Capture Technology at a Covanta Waste-to-Energy Facility
The original goals of this project were to advance the development and demonstration of the Biphasic CO 2 Absorption Process (BiCAP) technology for CO 2 capture from waste-to-energy (WTE) generation at a 2.5 tonne per day (TPD) engineering scale. This project has primarily focused on the basic design of the 2.5 TPD pilot system within the inside battery limits pertaining to CO 2 capture. The project also conducted a preliminary techno-economic analysis (TEA) for BiCAP at a scale of 100,000 tonne per year (TPY) of CO 2 capture and a preliminary life cycle analysis (LCA) with a primary focus on the environmental impacts related to global warming potential.
09 BIOMASS FUELS↗
Reducing Pb and Cl Mobility in Waste-to-Energy Fly Ashes via Chlorellestadite Formation
Sustainably sourced development minerals are vital to meeting the demand for low-carbon construction materials. A potential waste material that can be a low-carbon construction material for cementitious systems is waste-to-energy fly ash (WTE ash), a by-product of waste incineration. WTE ash contains chloride-bearing species and heavy metals, which can promote steel reinforcement corrosion and present long-term leaching risks. Here, we present a new multi-step ash treatment protocol involving dissolution and heating to transform the non-readily removable chlorides in WTE ash to Chlorellestadite (Ca 10 (SiO 4 ) 3 (SO 4 ) 3 Cl 2 ). Our results suggest that this transformation significantly reduces chloride release from WTE ash in an alkaline cement-like environment by over two orders of magnitude, from 1500 mg/l to less than 10 mg/l. This transformation also significantly reduces Pb mobility after treatment (from > 5 mg/l to < 0.5 mg/l), likely caused by the crystallo-chemical incorporation of Pb in Chlorellestadite. In contrast to the existing ash treatment methods, the proposed ash treatment protocol minimizes heavy metals volatilization while simultaneously reducing Pb mobility and chloride release through Chlorellestadite formation. Furthermore, these findings overcome limitations preventing the commercial use of WTE ash and thus opening up pathways towards a circular economy.
36 MATERIALS SCIENCE↗
Waste-to-Energy (WTE)-derived Low-Carbon-Footprint Concrete (LCFC)
The construction industry is estimated to generate around 600 million tons of concrete and demolition waste annually in the US. In comparison, Waste-To-Energy (WTE) plants generate about 6.6 million tons of ash from the combustion of municipal solid waste.1–4 Research has been ongoing for decades to upcycle WTE-ash and C&D waste.
36 MATERIALS SCIENCE↗
Waste-to-Energy Technical Assistance for Local Governments
The goal of this project is to mobilize data, information, and knowledge generated about organic waste streams to local governments and support their decision-making. It builds on previous work related to wet organic waste resources (food waste, sludge, manure, waste fats and oils). The project provides an improved understanding of local waste challenges and priorities to inform BETO's R&D strategies and decision-making. It also supports local governments' goals and plans related to sustainable waste management, enables energy and/or resource recovery projects development at municipal level, and facilitates public-private partnerships. A key challenge is associated with more activities requested by entities than program allows which is mitigated by prioritization by requesting agency. All FY21 and FY22 TA requests have been completed. Major accomplishments include: 1). 34 requests managed in the past two years, 2) Distilled key challenges faced by communities. Key outcomes include strong community participation since inception of the program, dedicated program web site, deliverables tailored to communities' needs, and distribution materials (e.g., fact sheets, brochures) for a broader audience.
BIOMASS FUELS↗
Comparison of Select Thermochemical Conversion Options for Municipal Solid Waste to Energy
This document provides a comparison of several thermochemical conversion options for municipal solid waste (MSW) - combustion, gasification, and pyrolysis - across various metrics such as products, number of current projects in the United States, capital and O&M costs, job development potential, emissions, and incentives associated with each pathway, as well as other parameters, such as operational considerations, land requirements, and public perception.
BIOMASS FUELS,ENVIRONMENTAL SCIENCES↗
Rapid characterization of MSW and RDF feedstocks for waste-to-energy process using LIBS and ML techniques
The heterogeneity in the composition of municipal solid wastes (MSW) poses significant challenges in the production of biofuel and bioproducts. This research aims to enhance the accuracy and efficiency of waste analysis and characterization by introducing a fast characterization approach for MSW-derived refuse-derived fuels (RDF) by combining Laser-Induced Breakdown Spectroscopy (LIBS) with advanced machine learning (ML) techniques. The approach combines data pre-processing of LIBS spectra of RDF, and the development of ML models trained on domain and theory-based spectral features for predicting process parameters. These models are adept at predicting key process parameters like High Heating Value (HHV), carbon content, and volatile matter. This approach can achieve an average RRMSE of 2.13% and R 2 of 0.98 or higher for all considered parameters on testing data. This work demonstrates significant potential for improving waste sorting, processing efficiency, and environmental compliance over traditional labor- and time-intensive laboratory waste analysis and characterization.
09 BIOMASS FUELS↗
Energy Efficient Waste Heat Coupled Forward Osmosis for Effluent Water Management at Coal-Fired Power Plants
This project sought to evaluate the technical and economic viability of the Aquapod©, a transformational low energy (<200 kJ/kg water) waste heat coupled forward osmosis (FO) technology, to manage effluents, meet cooling water demands, and achieve water conservation in a coal-fired power plant environment. The Aquapod© process is innovative because it is heat-driven, avoids the evaporation of water, and uses no toxic chemicals such as ammonia or amines. The Aquapod© process accomplishes this using an aqueous two-phase system (ATPS) coupled FO process. The evaluation revealed that the Aquapod© process offers a pathway to exploit waste heat resources within a power plant to achieve flue-gas desulfurization (FGD) wastewater volume reduction and water recovery with minimal pretreatment. Water recovery of 80% from FGD wastewater was achieved with minimal pretreatment, exceeding the project target of 50%. The estimated electrical energy of 2.16 kWh/m 3 of water produced for the Aquapod© process met the project target of < 3.6 kWh/m 3 . The heat required for the process operation was approximately 186 kJ/kg of produced water, which was slightly lower than the project target of 200 kJ/kg. The estimated treatment cost for installing and operating the Aquapod© process in conjunction with a spray dryer evaporator to achieve zero-liquid discharge (ZLD) of the 100 gpm FGD wastewater was $13.24/m 3 over a 30-year lifetime. As a point of reference, this study’s host power plant currently incurs a cost of $3.70/m 3 – $8.87/m3 on a discharged volume basis to discharge its wastewater into the publicly owned treatment works (POTW) after physical-chemical treatment. Therefore, the Illinois power plant would incur an incremental cost increase of $4.37/m 3 – 9.54/m 3 to achieve ZLD using the Aquapod© and spray dryer combination. Ample opportunities exist to further lower the ZLD capital and operating costs in the next design iteration to attain pipe parity at the higher end of the site treatment costs.
01 COAL, LIGNITE, AND PEAT↗
Broadband piezoelectric energy harvesting microgyroscopes: Design and nonlinear analysis
Small devices in remote or difficult-to-reach areas can benefit from harvesting energy from mechanical wasted energy, which reduces the requirement for a new power source. A multi-purpose energy harvesting microgyroscope system based on piezoelectric materials is suggested. The necessity of taking spatially varying electrostatic forces is examined. Considering the effects of the system's width and thickness, DC voltage, and angular speed the systems inherent frequencies are found. The partial differential equations describing the system's dynamics are numerically solved by using the differential quadrature method. Further, the numerical analysis enables to identify the optimal system design for broadband energy harvesting. The simulation results reveal that a system with a non-symmetric beam design is adequate for broadband energy harvesting. This is associated with the applied DC voltage, which may be modified to improve the broadband frequency of the system. It is concluded that the nonlinear softening effects create a broadband frequency response with high voltage output. However, DC and AC voltages need to be carefully selected in order to avoid the dynamic pull-in.
30 DIRECT ENERGY CONVERSION↗
Quantifying mining requirement and waste for energy sustainability
This study demonstrates the life-cycle assessment of different energy sources-coal, natural gas, solar, wind, nuclear, and hydro-particularly focused on mining activities and waste per given electricity capacity and generation.
Ermakova, Dinara [Department of Nuclear Engineerin↗
Panel Session 120: Roundtable: Waste Management - Energy Facilities Contractor Operating Group (EFCOG WM)
This Roundtable focused on the WM EFCOG working group as they met to discuss a variety of issues of importance to US DOE waste management operations. The purpose of the WM EFCOG is to seek out and promote the best management and operating practices, cost effective technologies and disposal options for all waste streams generated at US DOE facilities whether destined for US DOE or commercial facilities. Each site representative provided a radioactive waste management lessons learned briefing. Panelists with presentations: Savannah River Site (SRS) Solid Waste Program Update (Kerri Crawford); Idaho Clean-up Project Status (Frederick Hughes); West Valley Demonstration Project Update - EFCOG Waste Management Working Group (John Rendall); Key Project Challenges and Successes (Kalli Shupe); EFCOG WMWG Challenging Waste Subgroup Update (Tammy Monday); CH TRU Difficult Waste Stream Processing Challenges (Daniel Pancake); Argonne Building 350 Clean-up Success Using Effective Work Control (Daniel Dilday); Problematic Waste Streams on the Oak Ridge Reservation (John Wrapp)
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
Adaptive Urban Traffic Signal Control for Multiple Intersections: An LQR Approach
Traffic congestion leads to severe problems especially in urban traffic networks. It increases the chance of accidents, energy waste, and social costs. In order to address these problems, an adaptive linear quadratic regulator (LQR) approach is developed for traffic signal control at multiple intersections in an urban area. The proposed method controls the green time of the traffic signals to reduce traffic congestion and smooth traffic flow. Real-world data from vision-based traffic sensors are used to build the traffic network model, which mimics the real-world traffic behavior. In addition, the proposed control utilizes recursive least square parameter estimation, which is capable of tracking dynamic changes in traffic conditions. Simulation of Urban MObility (SUMO) is used to analyze the efficacy of the proposed method. Results of the simulation show that the proposed method outperforms pretimed control in various aspects.
adaptive LQR control↗
Combining anaerobic digestion and hydrothermal liquefaction in the conversion of dairy waste into energy: A techno economic model for New York state
There is increasing global interest and policies being enacted to lower greenhouse gas emissions, especially from the agricultural sector. In the U.S. for example, states with large dairy operations may combine proven manure valorization technologies, such as anaerobic digestion and hydrothermal liquefaction. Sustainable manure treatment would increase the recovery of energy and other useful co-products, namely biogas, biocrude oil and hydro-char as well as lower the environmental impacts. In this study, the economic feasibility of implementing a centralized bioenergy system in New York State was investigated. Here, the feasibility of this transformation depends on many factors, including capital costs, discount rates, and other financing arrangements, electricity selling prices, incentives and farm sizes and locations. For a large-scale implementation in New York State accounting for nearly 50% of the state’s dairy farms, our model of a distributed, hybrid anaerobic/hydrothermal system was shown to treat 590 million liters of wet manure per day, producing 607 million kWh of electricity, 162,000 L of biocrude oil and 117,000 kg of hydro-char per day. Electricity selling price is a critical factor. Increasing the electricity selling price from wholesale ($\$0.06$ /kWh) to retail ($\$0.18$ kWh) increased the net present value from $\$395$ million to $1.5 billion (considering a 40-year project lifetime).
42 ENGINEERING↗
Chlorellestadite-enriched waste-to-energy fly ashes in cementitious systems: Implications of ash treatment on end use
Not Available
36 MATERIALS SCIENCE↗
Magnetocaloric Generator for Waste Heat Energy Recovery
Explore the source record for details and available documents.
15 GEOTHERMAL ENERGY↗