Search NASA⌕ Search

SEARCH · Search NASA

Results for “biomass pretreatment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Pretreatment of Biomass by Selected Type-III Deep Eutectic Solvents and Evaluation of the Pretreatment Effects on Hydrothermal Carbonization

Hydrothermal carbonization (HTC) is a novel thermochemical conversion that converts wet biomass into energy dense solid fuel. Residual moisture under subcritical conditions reacts with a lignin-cellulose-hemicellulose matrix with the major reactions being identified as dehydration and decarboxylation. Among other reaction parameters (e.g., temperature, time, pressure), biomass morphology often plays a key role in HTC. The hypothesis of this study was enhancing the porous structure of biomass without significantly affecting biopolymer composition would augment hydrothermal carbonization (HTC). To prove the hypothesis, two type-III deep eutectic solvents (DESs), namely choline chloride:urea (ChCl:Urea, 1:2 mol/mol) and methyltriphenylphosphonium bromide:ethylene glycol (MTPB:EG, 1:4 mol/mol), were studied to pretreat loblolly pine at room temperature and ambient pressure for 1 h. DES pretreatment shows swelling of the biomass, increasing the surface fiber-to-fiber gap length by 52% and 185% for ChCl:Urea and MPTB:EG pretreatments, respectively. The total pore volume remained intact (2.6 × 10 –3 cm 3 /g), although new small pores evolved, and existing pores were abated with DES pretreatment. Hydrochars prepared from DES pretreated loblolly pine showed a high O/C and H/C ratio resulting in a significant increase of energy content (up to 42%) and a decrease of mass yield (up to 50 wt %), indicating an enhancement of HTC severity due to the alteration of surface morphology by DES. Finally, a preliminary process economics revealed that integrated DES pretreatment-HTC would increase fixed capital investment but decrease the cost of operation and manufacturing than the standalone HTC process.

09 BIOMASS FUELS↗
DOE OSTI2026

Demonstrating a butylamine-based deconstruction method for poplar biomass and conversion by diverse microbial strains

Low-boiling alkylamines such as butylamine offer promise as effective biomass pretreatment solvents that can be readily recovered and recycled; however, their capability to support microbial conversion of nutrients present in hydrolysates represents an important area for investigation. Here we employed butylamine to pretreat poplar biomass and characterize its effects on the release of fermentable sugars after solvent removal and enzymatic hydrolysis, as well as the biocompatibility of the produced hydrolysates with three organisms commonly used as bioconversion hosts. We observed that residual butylamine and the derivative butylacetamide were present in high enough concentrations to exert toxicity to strains of Aspergillus niger, Pseudomonas putida, and Rhodosporidium toruloides that produce malic acid, isoprenol and bisabolene, respectively. Removal of the toxic compounds by charcoal filtration and nutrient supplementation resulted in a hydrolysate containing >100 g L −1 of sugars that enabled strong growth, substrate consumption and bioproduct accumulation, outperforming defined cultivation media. This is the first demonstration of a butylamine-based deconstruction process for poplar biomass at a pilot-scale to achieve conversion of high sugar concentrations to valuable bioproducts with engineered microbes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Diol-enhanced natural deep eutectic solvents for efficient poplar pretreatment

Natural deep eutectic solvents (NDESs) are promising biomass pretreatment media, but their industrial application is often hindered by high viscosity. To address this limitation, diol-enhanced ternary DESs (TDESs) were prepared by incorporating 1,4-butanediol (1,4-BDO) or ethylene glycol (EG) into a choline chloride (ChCl) and 3,4-dihydroxybenzoic acid (DHBA) system. The applied TDESs maintained a liquid state at room temperature and had significantly reduced viscosity compared to the binary DES (BDES). In addition, the applied diols increased lignin solubility and suppressed lignin condensation by intercepting reactive carbocation intermediates. As a result, the recovered lignins from diol-induced TDES pretreatments showed better preservation of β-O-4 linkages and reduced condensation, improving their potential for downstream valorization. The diol-assisted DES systems showed a synergistic effect from the reduced viscosity, enhanced lignin solubility, and suppression of unwanted condensation, resulting in more effective biomass pretreatment performance, including the enhanced delignification and higher enzymatic digestibility compared to BDES. The 1,4-BDO-enhanced DES was also successfully applied to DHBA-enriched transgenic poplar, highlighting its potential for the processing of engineered biomass feedstocks.

3,4-dihydroxybenzoic acid↗
DOE OSTI2023

Chapter 4 - Pretreatment Technologies for Lignocellulosic Biomass Refineries

Pretreatment is a critical step in processing lignocellulosic biomass into biofuel and bioproducts and is considered the energy and cost center of the biomass conversion process. Although a large number of pretreatment technologies have been developed, not all the techniques are viable on a commercial scale at this stage. Moreover, the technology choice and process conditions depend highly on the type of biomass and the overall biorefinery scheme. This chapter provides an overview of different pretreatment methods, including their mechanism, important process parameters, current status, and challenges. The opportunities associated with new technologies and approaches are presented. Emphasis is placed on low-severity thermal pretreatment technologies. The chapter also provides a brief discussion of the challenges to achieving the economic viability of the technologies on a commercial scale.

BIOMASS FUELS↗
DOE OSTI2025

Advancing continuous enzymatic hydrolysis for improved biomass saccharification

Background: A deployable, continuous enzymatic hydrolysis (CEH) process can address cost and commercialization risks associated with second-generation (Gen2) biorefinery sugar/lignin/ethanol production while contributing to energy supply and security. Developments in commercial enzymatic hydrolysis formulations targeting Gen2 pretreated biomass such as deacetylated mechanically refined (DMR) biomass necessitate a reassessment of the existing hybrid simultaneous saccharification and fermentation (SSF) approach. Notably, the practice of "finishing hydrolysis" in SSF has become problematic with the introduction of oxidative enzymes, such as lytic polysaccharide monooxygenases (LPMOs), into commercial cellulase formulations as these require specific redox conditions and cofactor. Moreover, continuous SSF has not been demonstrated at commercial scale, limiting deployment and the associated economic benefits to farmers, producers, and support industries. Results: Continuous enzymatic hydrolysis (CEH) was demonstrated at bench scale to enable optimal saccharification performance of deacetylated mechanically refined (DMR) pretreated biomass. Diafiltration was demonstrated to retain pretreated biomass solids and enzymes for continuous reaction while removing solubilized product sugars in situ. A significant breakthrough afforded by the CEH process is its ability to achieve equivalent endpoint conversions with approximately 50% lower enzyme loading. Yields of glucose and xylose were increased ~ 15% and ~ 4%, respectively, over batch hydrolysis. Unlike SSF using yeast or Zymomonas, CEH allows precise optimization of pH, temperature, oxygen tension, LPMO mediator concentration, and removal of end-product inhibitors. Conclusions: Advanced CEH holds promise as a transformational, process-intensified, and cost-effective method for producing soluble clarified biomass sugars and insoluble lignin-rich streams. Enhancing saccharification performance, optimizing operating parameters, and employing membrane filtration will help overcome existing challenges and enable the efficient production of valuable biomaterials from lignocellulosic biomass.

09 BIOMASS FUELS↗
DOE OSTI2025

Multi-scale computational screening and mechanistic insights of cyclic amines as solvents for improved lignocellulosic biomass processing

A computational screening workflow for the efficient deconstruction of cellulose, lignin and hemicellulose fractions of lignocellulosic biomass using cyclic amines as solvents. Lignocellulosic biomass is a promising feedstock for production of affordable fuels and chemicals from renewable resources. Effective solubilization and subsequent deconstruction of its cellulose, hemicellulose, and lignin fractions is essential for the viability of future biorefineries. This study used quantum chemistry-based equilibrium thermodynamics methods to evaluate the potential of 650 cyclic amines to solubilize cellulose, hemicellulose, and lignin. The activity coefficients of solvent - biopolymer interactions were predicted using the COSMO-RS (COnductor-like Screening MOdel for Real Solvents) method and used to identify cyclic amines that can efficiently dissolve and extract selective fractions of biopolymers during biomass pretreatment. Among the 650 cyclic amines, 1-piperazineethanmaine was predicted to be an effective solvent for extracting all three polymers and was experimentally shown to achieve the highest lignin removal (97.1%). Non-covalent interaction, reduced density gradient and quantum chemical calculations were performed to elucidate the dissolution mechanism of lignin, cellulose and hemicellulose and gain further molecular level insights into the interactions between the cyclic amines and biomass polymers that promote efficient solubilization and extraction. These analyses indicated that 1-piperazineethanmaine and 1-methylimidazole make noncovalent van der Waals, electrostatic interactions and hydrogen bonding with lignin, leading to enhanced lignin removal, while the strong intramolecular hydrogen bonding interactions in cellulose and hemicellulose result in weaker solvent-biopolymer interactions. Overall, the computational approach provided an efficient method for identifying cyclic amines tailored for optimal biomass pretreatment and resulted in the identification of a potential new class of solvents for effective biomass pretreatment.

Kumar, Nikhil↗
DOE OSTI2023

Continuous Enzymatic Hydrolysis Development for Improved Saccharification Performance

The Continuous Enzymatic Hydrolysis Development (CEHD) project aims to reduce the cost and commercialization risks of Gen2 biorefinery sugar/lignin/ethanol production through development of a deployable continuous enzymatic hydrolysis process. Recent changes in the technical landscape of commercial enzymatic hydrolysis of Gen2 pretreated biomass dictate that the existing hybrid SSF approach be reconsidered. Most importantly, the current practice of "finishing hydrolysis" in SSF must be abandoned due to the fact that new cellulase/hemicellulose formulations from Novozymes, now the sole supplier of commercial Gen2 enzymes in North America, are now not rated for SSF (see NZ CTec3HS product bulletin). We have recently developed bench scale CEH tools to optimize saccharification of DMR pretreated biomass where, unlike SSF with yeast or Zymomonas, the pH, temperature, oxygen tension, LPMO mediator concentration, and/or removal of end-product inhibitors can be precisely controlled. In scale up, the goal is to use existing commercial cross flow ceramic membrane filtration external loops coupled to enzymatic hydrolysis (EH) reactors. Pretreated biomass solids and enzymes are retained for reaction while solubilized product sugars are removed in situ, with high extents of conversion and longer enzyme lifetimes achieved through a series of reactor-membrane unit stages. The CEHD project is focused on advancing CEH as a transformational, process-intensified, lower-cost method for producing soluble clarified biomass sugars and insoluble lignin-rich streams.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗
DOE OSTI2025

Biotransformation of Phenolics in Spent Liquor from Aqueous Ammonia Pretreatment

Spent liquors of biomass pretreatment provide a source for renewable chemical production. These liquors require treatment before being discharged; otherwise, they negatively impact the environment. Herein, spent liquors from aqueous ammonia pretreatment of poplar wood are characterized for phenolic content via liquid chromatography–mass spectrometry and nuclear magnetic resonance spectroscopy. The main phenolics are phenol, p-hydroxybenzamide (pHBAm), and p-hydroxybenzoic acid (pHBA), of which pHBAm and pHBA are produced from the ester-linked p-hydroxybenzoates in poplar wood. Phenol is produced from pHBA via decarboxylation. The potential biotransformation of the extracted phenolics into 2-pyrone-4,6-dicarboxylic acid (PDC) is assessed using an engineered strain of Novosphingobium aromaticivorans DSM12444 (PDC strain). Biotransformation of pHBAm to PDC is shown to be possible in the presence of pHBA, but not when pHBAm is the sole phenolic substrate, this is the first reported observation of N. aromaticivorans producing PDC from an aromatic amide. The phenol present is not transformed to PDC and does not inhibit PDC production. This study demonstrates that the phenolic amide in spent liquor from ammonia pretreatment can be valorized via biotransformation using N. aromaticivorans, which adds to the growing versatility of N. aromaticivorans as a microbial chassis for converting plant-derived compounds to useful products.

biomass↗
DOE OSTI2023

The effect of ferrous sulfate pretreatment on the optimal temperature for production of sugars during autothermal pyrolysis

Fast pyrolysis is a promising technology for producing cellulosic sugars from lignocellulosic biomass. Success in this endeavor requires measures that prevent naturally occurring alkali and alkaline earth metals (AAEM) from breaking pyranose and furanose rings in lignocellulosic biomass. This is especially critical for high ash feedstocks like corn stover and other kinds of herbaceous biomass. Pretreating corn stover with ferrous sulfate converts AAEM into thermally stable salts, which passivates the catalytic activity of these metals and dramatically improves sugar yields. AAEM passivation in combination with autothermal (partial oxidative) operation improves the prospects for intensifying the production of sugars via fast pyrolysis. We hypothesized that pretreated biomass pyrolyzed in the presence of oxygen can substantially influence the temperature dependence of pyrolysis kinetics. Here, we found that autothermal (air-blown) pyrolysis of ferrous sulfate pretreated corn stover achieved maximum sugar yield of 15.6 wt% (biomass basis) at 450 °C, whereas the maximum phenolic oil yield of 9.2 wt% (biomass basis) was reached at 500 °C. Considering these tradeoffs in yields of these highly desirable pyrolysis products, the ideal operating temperature is between 450 and 500 °C. These results suggest that two-stage pyrolysis might allow maximum recovery of both sugars and phenolic oil.

09 BIOMASS FUELS↗
DOE OSTI2020

Renewable biohydrogen production from lignocellulosic biomass using fermentation and integration of systems with other energy generation technologies

Biohydrogen is a clean and renewable source of energy. It can be produced by using technologies such as thermochemical, electrolysis, photoelectrochemical and biological, etc. Among these technologies, the biological method (dark fermentation) is considered more sustainable and ecofriendly. Dark fermentation involves anaerobic microbes which degrade carbohydrate rich substrate and produce hydrogen. Lignocellulosic biomass is an abundantly available raw material and can be utilized as an economic and renewable substrate for biohydrogen production. Although there are many hurdles, continuous advancements in lignocellulosic biomass pretreatment technology, microbial fermentation (mixed substrate and co-culture fermentation), the involvement of molecular biology techniques, and understanding of various factors (pH, T, addition of nanomaterials) effect on biohydrogen productivity and yield render this technology efficient and capable to meet future energy demands. Further integration of biohydrogen production technology with other products such as bio-alcohol, volatile fatty acids (VFAs), and methane have the potential to improve the efficiency and economics of the overall process. In this study, various methods used for lignocellulosic biomass pretreatment, technologies in trends to produce and improve biohydrogen production, a coproduction of other energy resources, and techno-economic analysis of biohydrogen production from lignocellulosic biomass are reviewed.

09 BIOMASS FUELS↗
DOE OSTI2021

High-Efficiency Conversion of Ionic Liquid-Pretreated Woody Biomass to Ethanol at the Pilot Scale

We report that with a diverse and widely distributed global resource base, woody biomass is a compelling organic feedstock for conversion to renewable liquid fuels. In California, woody biomass comprises the largest fraction of underutilized biomass available for biofuel production, but conversion to fuels is challenged both by recalcitrance to deconstruction and by toxicity toward downstream saccharification and fermentation due to organic acids and phenolic compounds generated during pretreatment. In this study, we optimize pretreatment and scale-up of an integrated one-pot process for deconstruction of California woody biomass using the ionic liquid (IL) cholinium lysinate [Ch][Lys] as a pretreatment solvent. By evaluating the impact of solid loading, solid removal, yeast acclimatization, fermentation temperature, fermentation pH, and nutrient supplementation on final ethanol yields and titers, we achieve nearly full conversion of both glucose and xylose to ethanol with commercial C5-utilizing Saccharomyces cerevisiae. We then demonstrate process scalability in 680 L pilot-scale fermentation, achieving >80% deconstruction efficiency, >90% fermentation efficiency, 27.7 g/L ethanol titer, and >80% ethanol distillation efficiency from the IL-containing hydrolysate post fermentation. This fully integrated process requires no intermediate separations and no intermediate detoxification of the hydrolysate. Using an integrated biorefinery model, current performance results in a minimum ethanol selling price of $\$$8.8/gge. Reducing enzyme loading along with other minor process improvements can reduce the ethanol selling price to $\$$3/gge. This study is the largest scale demonstration of IL pretreatment and biofuel conversion known to date, and the overall biomass-to-ethanol efficiencies are the highest reported to date for any IL-based biomass-to-biofuel conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Data for Optimization of Pre-Commercial Enzymes Dosage for a Potential Lignocellulosic Biorefinery

Lignocellulolytic enzymes remain one of the primary cost constraints in second-generation (2G) ethanol biorefineries. Achieving efficient hydrolysis of structural carbohydrates with minimal enzyme dosage, maintaining slurry fermentability for industrially relevant ethanol titers, and maximizing ethanol yield per ton of biomass are among the major challenges in 2G processes. In this study, we optimized the dosages of pre-commercial cellulase (NS22257) and hemicellulase (NS22244) on pilot-scale, hydrothermally pretreated lignocellulosic substrates. Enzyme dosages were evaluated at three levels: 20 mg of cellulase with 7.25 mg of hemicellulase (ED-1), 40 mg with 14.5 mg (ED-2), and 60 mg with 21.75 mg (ED-3). As expected, the highest sugar yields were obtained with ED-3; however, for sweet sorghum, oilcane, and miscanthus, sugar yields from ED-2 and ED-3 were not significantly different (p < 0.05). For example, sweet sorghum produced 123.78 ± 1.54 g L−1 and 125.76 ± 0.46 g L−1 of total sugars (glucose and xylose) with ED-2 and ED-3, respectively. Although energycane exhibited a statistically significant difference between ED-2 and ED-3, the incremental gain with ED-3 was modest, increasing sugar release by only 9.02 g L−1 relative to ED-2. Importantly, ED-1 resulted in sugar yields of 88.88 ± 3.64 to 106.86 ± 1.21 g L−1, sufficient to achieve ethanol titers ≥40 g L−1, the threshold required for industrial relevance. A semi-integrated bioprocess validated this outcome, producing 42.09 ± 2.38 g L−1 ethanol and an estimated yield of 213.38 L of ethanol per dry ton of pretreated biomass, requiring only 20.83 L of cellulase and 6.25 L of hemicellulase per ton. Remarkably, these enzyme dosages were approximately tenfold lower than those reported in prior studies.

Energycane↗
DOE OSTI2020

Emerging Strategies for Modifying Lignin Chemistry to Enhance Biological Lignin Valorization

Biological lignin valorization represents a promising approach contributing to sustainable and economic biorefineries. Here, the low level of valuable lignin–derived products remains a major challenge hindering the implementation of microbial lignin conversion. Lignin's properties play a significant role in determining the efficiency of lignin bioconversion. To date, despite significant progress in the development of biomass pretreatment, lignin fractionation, and fermentation over the last few decades, little efforts have gone into identifying the ideal lignin substrates for an efficient microbial metabolism. In this Minireview, emerging and state–of–the–art strategies for biomass pretreatment and lignin fractionation are summarized to elaborate their roles in modifying lignin structure for bioconversion. Fermentation strategies aimed at enhancing lignin depolymerization for microbial utilization are systematically reviewed as well. With an improved understanding of the ideal lignin structure elucidated by comprehensive metabolic pathways and/or big data analysis, modifying lignin chemistry could be more directional and effective. Ultimately, together with the progress of fermentation process optimization, biological lignin valorization will become more competitive in biorefineries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Impacts of Hydrogen Bond Donor Structures in Phenolic Aldehyde Deep Eutectic Solvents on Pretreatment Efficiency

As a green solvent for biomass processing, deep eutectic solvents (DESs) have shown effectiveness in biomass processing. Here, in this study, phenolic aldehydes with different numbers of methoxy groups, including 4-hydroxybenzaldehyde (HBA, no methoxy), vanillin (VA, monomethoxy), and syringaldehyde (SA, dimethoxy) were employed to synthesize DESs with choline chloride (ChCl). The presence of methoxy groups in the hydrogen bond donor structure affected DES properties, as well as biomass pretreatment performance. The high thermal stability of phenolic aldehyde DESs was shown with over 225 °C onset temperature. The hydrogen bond donor with one aldehyde and one hydroxyl group at the para position without a methoxy group (ChCl-HBA) showed the highest xylan removal and delignification, reaching 59.3 and 88.0%, respectively, leading to the highest enzymatic hydrolysis yield. Sonication after pretreatment further enhanced the hydrolysis yields, achieving 83.3% glucan conversion and 50.1% xylan conversion. In the lignin-rich fraction, the recovered lignin showed a low weight–average molecular weight under 2100 g/mol with a relatively uniform molecular weight dispersity below 1.5. This study provides insights into how the chemical structure of hydrogen bond donors in DESs affects biomass processing and paves the way for designing effective lignin-derived DES in future biorefinery processes.

09 BIOMASS FUELS↗
DOE OSTI2021

Modelling a compressible packed bed flow-through washing and deacetylation reactor for corn stover pretreatment

The deacetylation process is a key step in the lignocellulosic biomass pretreatment process that currently is done in batch reactors. A flow-through diffuser type reactor is a promising approach to make the process more efficient and economically favorable. A washing step before deacetylation can further reduce chemical usage and increase the process efficiency. However, the highly compacted biomass particles can cause significant pressure-drop for fluid flow through the bed, which in the worst case can cause self-enhancing pressure-drop leading to reactor blocking. Detailed understanding of the fundamentals of flow through a compressible packed bed is necessary to scale up the washing and deacetylation process. This work closely examines the classical Kozeny Carman equation and proposes modifications to accurately predict the pressure-drop at different compaction states. Here, a compressible packed bed model is further developed based on the interaction between solid mechanics and fluid dynamics. Experimental measurements of water flow through a packed bed of corn stover show good agreement with the developed model. Corn stover washing process scale up simulations show that smaller reactor diameter, higher friction lining material, lower process throughput, and higher process temperature is favorable in stabilizing the bed from extensive compression when the bed height is fixed.

09 BIOMASS FUELS↗
DOE OSTI2024

Economical methods for performing oxidative catalytic pretreatment of plant biomass using a single-stage two oxidant process

An improved alkaline pretreatment of biomass is provided that is a single-stage, two oxidant alkaline oxidative pretreatment process. The process uses a homogenous catalyst with at least two oxidants (Hydrogen peroxide and enhanced levels of oxygen) in an alkaline environment to catalytically pretreat lignocellulosic biomass in a single-stage oxidation reaction. The provided single-stage alkaline-oxidative pretreatment improves biomass pretreatment and increase enzymatic digestibility to improve the economic feasibility of production of lignocellulose derived sugars.

Hegg, Eric L.↗
DOE OSTI2024

Use of polyamines in the pretreatment of biomass

The present invention provides for a method to deconstruct a biomass: the method comprising: (a) introducing a solvent comprising a polyamine, or a mixture of polyamines, to a biomass to dissolve at least part of solid biomass in the solvent, wherein the polyamine is a Brønsted or Lewis base, and/or the polyamine is a hydrogen bond donor and/or acceptor; (b) optionally introducing an enzyme and/or a microbe to the solubilized biomass mixture such that the enzyme and/or microbe produces a sugar from the solubilized biomass mixture; (c) optionally separating the sugar from the solubilized biomass mixture; and (d) optionally separating the lignan from the solubilized biomass mixture.

Source record↗