SEARCH · Search NASA

Results for “concentration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

DOE OSTI2026

High-throughput small-angle X-ray scattering reveals effective structure factor transitions linked to high-concentration antibody viscosity

High-concentration monoclonal antibody (mAb) formulations are often constrained by elevated viscosity, largely driven by protein–protein interactions, which complicates manufacturing and limits subcutaneous delivery. Early viscosity risk assessment is essential during discovery, yet traditional measurements require large sample volumes, and lack high-throughput capability. Here, we develop a high-throughput small-angle X-ray scattering (SAXS) protocol to detect mAb self-association at dilute concentrations, enabling early predictive insights into high-concentration viscosity. Synchrotron SAXS measurements were conducted for 21 mAbs formulated in a histidine buffer at pH 6.0. An initial subset of 10 mAbs analyzed across 1–150 mg/mL revealed that effective structure factor transitions in the low-q region, indicative of interparticle interactions, consistently emerged below 25 mg/mL. Subsequently, 11 additional mAbs were analyzed at 1–25 mg/mL using automated liquid handling and flow cells to enable high-throughput screening. High-viscosity mAbs exhibited detectable low-q upturns at concentrations ≤10 mg/mL, whereas low-viscosity mAbs showed downturns. A classification criterion based on effective structure factor transitions accurately classified all high- and low-viscosity mAbs at 150 mg/mL, offering a scalable, sample-efficient alternative to conventional methods. These results extend recent findings on the concentration-dependent sensitivity of SAXS to short-range attractions, demonstrating that they can emerge at lower concentrations than previously reported. This study presents the most comprehensive and diverse SAXS dataset for mAbs reported to date within a single formulation, providing a valuable resource for developing and validating coarse-grained models that can more accurately capture intermolecular interactions governing high-concentration solution behavior, thereby enabling rational antibody engineering and improved developability.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Cations Enhance Hydride Transfer to Noncatalytic Metals in Concentrated Alkaline Electrolytes

Alkali metal cations are known to influence the kinetics of the hydrogen evolution reaction (HER), acting as either promoters or inhibitors to the rate-determining step depending on the metal surface, local pH, and cation concentration. Despite the importance of concentrated electrolytes for commercial electrochemical cells, the impact of cations on the HER in concentrated alkaline environments (>1 M) and in mixed cation systems remains poorly understood. Here, this study quantifies the HER kinetics at polycrystalline metal surfaces (Pt, Au, Cu, and Fe) and the equilibrium solvation environment in pure and mixed alkali metal hydroxide electrolytes at concentrations up to 3.0 M. Kinetic analyses of Au, Cu, and Fe revealed a positive cation-concentration-effect that was primarily driven by changes to the charge transfer coefficient. Multinuclear NMR spectroscopy examined the solvation of H 2 O/OH – species and the alkali cations as a function of (mixed) alkali cation concentration(s), and demonstrated rapid exchange between solvent, hydroxide, and solvated cations. Together, these findings support models where HER kinetics on noncatalytic metal surfaces in strongly alkaline conditions are primarily governed by the average polarization and polarizability of the metal/solution interface and that increasing cation activity continues to increase the transfer coefficient at metal-hydroxide concentrations up to 3.0 M. Electrolytes and additives which can outcompete weakly hydrated cations and disrupt the interfacial water structure are expected to suppress parasitic HER at electrodes for energy storage and electroplating.

Cations↗

DOE OSTI2026

A mathematical design framework for membrane pre-concentration in energy-efficient recovery of fermentation products

Due to the dilute nature of products manufactured via fermentation and cell-free bioprocessing, dewatering is a common unit operation in downstream processing (DSP) for bioproduct recovery, but it is typically energy intensive. To improve DSP energy efficiency for bio-based small molecules, integrating high-pressure membrane pre-concentration is a promising process option. However, this approach is typically constrained by a tradeoff between concentration factor (CF) and product recovery (PR), namely increasing the CF typically results in greater product loss, and vice versa. Here we developed a model that enables process design guidelines to: (i) identify scenarios in which the additional energy consumption and product loss from membrane pre-concentration are justified for use in DSP, and (ii) determine the optimal CF that minimizes process specific energy consumption. We compared the energy consumption of high-pressure membrane-integrated processes to evaporation-only processes and applied the model to an experimental case study for the separation and purification of butyric acid from Clostridium tyrobutyricum fermentation using an in situ product recovery (ISPR) process. The model estimated that integrating a tangential-flow reverse osmosis (RO) pre-concentration unit could reduce process energy consumption up to 45%. The use of advanced membrane pre-concentration technologies, such as negative rejection membranes and organic solvent reverse osmosis (OSRO), have the potential to further reduce the overall process specific energy consumption up to 96%, projected based on modeling. Overall, membrane pre-concentration, especially when strategically integrated prior to an evaporation step with optimized process conditions, holds significant potential for improving DSP energy efficiency, particularly in applications requiring substantial solvent removal for product recovery from dilute mixtures.

09 BIOMASS FUELS↗

DOE OSTI2024

An Advanced Cooling Device for Concentrated Photovoltaic Systems

Concentrated photovoltaics (CPV) have the potential to significantly enhance the energy conversion utilization of solar panels and reduce solar generation costs, making them a crucial area of advancement in solar power generation technology. However, the concentration of sunlight can lead to overheating of solar panels, resulting in a notable reduction in both the efficiency of solar power generation and the lifespan of the panels. This challenge remains the predominant technical hurdle that hinders the application of concentrated photovoltaic power generation technology. In this study, we propose a new cooling method for concentrated photovoltaic power generation systems via an integrated approach of incorporating Phase-Change Thermal Storage (PCTS) and Thermoelectric Generator (TEG) technology. This new method not only enhances the overall system's electricity generation efficiency but also effectively resolves the technical challenge of concentrated photovoltaic panel overheating issues, ensuring the continuity of concentrated photovoltaic power generation and extending the lifespan of solar panels and their components. In order to make full use of the wasted heat generated by photovoltaic power generation and effectively improve the power generation efficiency of the system, this work developed a phase change heat storage device based on a phase change material. This device uses the temperature difference between day and night to recover wasted heat from photovoltaic power generation. Through integration with the thermoelectric power generation system, thermal energy can be converted into electrical energy. In addition, the Peltier effect of thermoelectric materials is used to construct a photovoltaic panel overheating protection system, which significantly improves the reliability and service life of the system.

14 SOLAR ENERGY↗

DOE OSTI2024

Heliostats with Adjustable Shape for High Concentration throughout the Day

Our motivation is to develop more efficient heliostats that can provide commercially viable solar thermal power at temperatures > 800°C. Such high temperatures will enable high-temperature industrial processes, as well as electrical generation after sunset with high efficiency. The importance of this research is that such heliostats have the potential to substantially expand the global use of solar energy, by adding solar thermal power as a major component. Thermal solar currently accounts for only 1% of all solar power (with PV being the rest), with heliostat fields providing just 0.25%. Our goals have been 1) to demonstrate a technical improvement for heliostats that can enable fields of them to more efficiently power receivers and reactors, and 2) to show a path to low-cost mass production. Our solution uses new opto-mechanical technology to correct a fundamental deficiency of present heliostats that limits their concentration, namely that they have fixed shape. Most of today’s heliostat research does not address this, but is directed simply toward cost reduction in an effort to make heliostats commercially viable. We are motivated to explore also improving heliostat efficiency, which can be done by continually changing their shape to maximize the concentration of sunlight throughout the day. This is not a new concept, but it has never been implemented in a practical, cost-effective way that approaches the theoretical limit to concentration while also improving mechanical performance; this is our goal. Our major accomplishments have been: 1) We have realized the planned design, construction, and test of a prototype heliostat that achieves the required shape changes in an 8 m2 single-piece glass mirror. The mirror is attached to a steel support frame that is automatically mechanically twisted by the heliostat drives that orient the mirror to direct sunlight to the tower-mounted receiver. Closed-loop tracking is done using a new beamsplitter camera that exploits the target-oriented mount configuration. Field tests of the heliostat show that the light is reflected through the day to always form a disc image of the sun, as needed to obtain the highest concentration. 2) We have developed the design for a field of 431 heliostats to deliver annual average of 1 MW of thermal power at 3,000 sun concentration, matched to a high-temperature ≥ 1000°C chemical reactor. 3) We have also developed, beyond the original stated goals of the project, a new concept for closed-loop tracking and shape-sensing for all the heliostats in the above field, using just 6 cameras around the concentrated reactor focus. Our research adds to the understanding of solar thermal energy by its demonstration of the technical effectiveness of a higher performing heliostat, and by its concept for a new powerful method for real-time tracking and shape sensing in the field, as described above. We have studied the economic feasibility of fields of our twisting heliostats to provide high- temperature heat at a price competitive with that of burning gas, to satisfy the DOE’s studied zero-emissions scenario, where the gas price has to include the cost of carbon capture. The project has the potential to greatly benefit the public if it helps limit global warming by 1) reducing carbon emission from industrial heating, which is currently a major contributor to the 40-billion-ton annual increase in atmospheric CO 2 . 2) Ultimately, the technology could prove to be the least expensive method to power direct air capture of CO 2 on the very large scale needed to remove the 1 trillion-ton excess of CO 2 already in the atmosphere.

14 SOLAR ENERGY↗

DOE OSTI2026

Conductivity-Driven Origin of the Limiting Current in Concentrated Electrolytes

Next-generation electrolyte materials are hindered by their ability to support high currents essential for fast-charge and high-power battery applications. The maximum current supported by an electrolyte, the limiting current, is dictated by the formation of concentration gradients across the electrolyte under an electric field. Most of the literature attributes the onset of the limiting current in concentrated electrolytes to the salt concentration at the positive electrode approaching the solubility limit. Here, in this study, we leverage operando X-ray transmission imaging to measure spatiotemporal salt concentration profiles of a polymer electrolyte in a lithium–indium symmetric cell at a current exceeding the limiting current. The measurement of concentration profiles enables mapping the spatiotemporal electric potential, which comprises an ohmic contribution, governed by conductivity, and an overpotential related to maintaining concentration gradients. We find that a precipitous drop in conductivity at the positive electrode drives the divergence of electric potential, rather than a thermodynamic solubility limit.

Abdo, Emily E. [University of California, Berkeley↗

DOE OSTI2024

Production of Germanium and Gallium Concentrates for Industrial Processes

A conceptual design of a process to produce germanium and gallium metal from mixed rare earth concentrates (consisting of oxides or carbonates) (MREC) produced from lignite carbon-ore was developed. The design was based on past work associated with the recovery of Ge from carbon-ore ash, modeling of the behavior of Ge and Ga in pyrometallurgical processes, and laboratory testing of the potential recovery of Ge and Ga from MREC. A teaming plan was developed that encompasses the entire supply chain that consisted of the Ge and Ga-rich carbon-ore resource, MREC pilot scale concentrate producer, MREC processing facility to produce Ge/Ga concentrates, refining of Ge and Ga concentrates to produce high purity metals (99.999+ purity), and Ge/Ga end users. A research plan was developed to transition the Ge and Ga separation from MREC, concentrating, and refining technology from a conceptual design to commercial scale. A technical and economic assessment of the conceptual design indicated that MREC derived from the UND process can produce 90 to 99% pure Ge and Ga concentrates at >20% lower costs.

01 COAL, LIGNITE, AND PEAT↗

DOE OSTI2025

Uncertainties in the effects of organic aerosol coatings on polycyclic aromatic hydrocarbon concentrations and their estimated health effects

We used the CAM5 model to examine how different particle-bound polycyclic aromatic hydrocarbon (PAH) degradation approaches affect the spatial distribution of benzo(a)pyrene (BaP). Three approaches were evaluated: NOA (no effect of OA coatings state on BaP), shielded (viscous OA coatings shield BaP from oxidation under cool and dry conditions) and ROI-T (viscous OA coatings slow BaP oxidation in response to temperature and humidity). Results show that BaP concentrations vary seasonally, influenced by emissions, deposition, transport and degradation approach, all of which are influenced by meteorological conditions. All simulations predict higher population-weighted global average (PWGA) fresh BaP concentrations during December–January–February (DJF) compared to June–July–August (JJA), due to increased emissions from household activities and reduced removal processes during colder months. The shielded and ROI-T approaches, which account for OA coatings, result in 2–6 times higher BaP concentrations in DJF compared to NOA. The shielded simulation predicts the highest PWGA fresh BaP concentration (1.3 ng m −3 ), with 90 % of BaP protected from oxidation. In contrast, the ROI-T approach forecasts lower concentrations in middle to low latitudes, as it assumes less effective OA coatings under warmer, more humid conditions. Evaluations against observed BaP concentrations show the shielded approach performs best, with a normalized mean bias (NMB) within ± 20 %. The combined incremental lifetime cancer risk (ILCR) for both fresh and oxidized PAHs is similar across simulations, emphasizing the importance of considering both forms in health risk assessments. This study highlights the critical role of accurate degradation approaches in PAH modeling.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

DOE OSTI2024

An Advanced Cooling Device for Concentrated Photovoltaic Systems

Gou, Yimeng↗

DOE OSTI2024

Harnessing dimethyl ether with ultra-low-grade heat for scaling-resistant brine concentration and fractional crystallization

Solvent-driven separations may enable scalable concentration of hypersaline brines, supporting a circular resource economy from the extraction of lithium and rare earth elements from spent battery and magnet leachates. This work analyses a novel solvent-driven water extraction (SDWE) system employing dimethyl ether (DME) and ultra-low-grade heat for brine concentration and fractional crystallization. SDWE exploits DME’s unique properties: (1) a low dielectric constant that promotes water solubility over charged solutes by a factor of 10 3 , and (2) a high volatility that facilitate efficient DME reconcentration with ultra-low-grade heat. The techno-economic viability of SDWE is assessed with a computational framework that encompasses a liquid–liquid separator and a solvent concentrator. We integrate the extended universal quasichemical model with the virial equation of state to predict the compositions of the complex three-phase DME-water mixture at vapor–liquid and liquid–liquid equilibrium. Subsequently, we optimize the thermodynamic and economic performance of SDWE, by controlling the interstage flash pressure, heat source temperature, and the number of concentrating stages. DME-based SDWE concentrates an input saline feed to 5.5 M and regenerates over 99 % of the DME using ultra-low-grade heat below 50 °C, with a DME/water selectivity ratio of 125. Here our calculations reveal that optimal performance is achieved at interstage flash pressures of 0.4 – 0.5 bar for heat source temperatures between 323–373 K, with improved exergetic efficiencies at lower temperatures. At a heat source temperature of 323 K and an interstage pressure of 0.489 bar, DME-driven SDWE achieves an optimal thermodynamic efficiency of 20.5 % and a projected specific cost of US$ 1.93 m -3 . These specific costs suggest that SDWE is competitive with commercialized thermal distillation technologies, while mitigating the traditional risks associated with scaling in heat and mass exchangers with hypersaline brines.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Concentration-Driven Slowdown of Chain-Exchange Kinetics in Block Copolymer Micelle Solutions

Here, we investigate the dependence of chain-exchange kinetics on polymer concentration for spherical micelles prepared from a polystyrene-b-poly(ethylene-alt-propylene) (SEP) diblock copolymer ( M n = 75 kDa, Ð = 1.05, and f PS = 0.18) in the PEP-selective solvent squalane. Solutions with concentrations of 15 vol% or more adopt a body-centered-cubic (BCC) packing of micelles, or a dense liquid-like packing (LLP), as confirmed by small-angle X-ray scattering. Concurrently, the mean aggregation number of the micelles grows steadily from about 60 in dilute solution to nearly 200 by 50 vol%. Time-resolved small-angle neutron scattering (TR-SANS) analysis reveals a monotonic and substantial (i.e., more than four orders of magnitude) decrease in the rate of chain exchange as the polymer concentration increases from 1 to 50 vol%. The TR-SANS relaxation functions are analyzed, taking into account both changes in contrast (due to chain exchange) and evolution in the structure factor (due to refinement of micelle packing). The activation energy for chain pullout is extracted using an established model and can be expressed as a linear function of polymer concentration, indicating that, in addition to the enthalpic barrier for extracting the core block, the evolution of micelle characteristics with increasing concentration imposes further constraints on chain exchange. Consistent with a theory of Halperin, these results suggest that the dominant factor reflects steric penalties during core block pullout arising from a reduced interfacial area per chain and associated increased corona crowding, due to the increase in aggregation number. The rate of exchange is independent of whether the micelles adopt a BCC or LLP arrangement, confirming that the rate-limiting step is extraction of the core block.

chemical structure↗

DOE OSTI2026

Effect of Initiator Density, Catalyst Concentration, and Surface Curvature on the Uniformity of Polymers Grafted from Spherical Nanoparticles

Polymer-grafted nanoparticles (PGNPs) are versatile hybrid materials whose properties critically depend on brush dimensions, uniformity, and grafting density. Herein, we systematically investigated how initiator density, catalyst concentration, and nanoparticle curvature govern the growth of poly(methyl methacrylate) (PMMA) brushes grafted from spherical SiO 2 nanoparticles via surface-initiated activators regenerated by electron transfer atom transfer radical polymerization (SI-ARGET ATRP). By tuning the initiator density through a combination of “active” and “dummy” silane initiators anchored on the nanoparticles’ surface and controlling the catalyst concentration, we reveal that increased initiator crowding and smaller surface curvature amplify steric hindrance, leading to decreased initiation efficiency and broader molecular weight distributions. Correlation with the corresponding unattached chains by ARGET ATRP suggests the presence of permanently inaccessible (“buried”) initiation sites, which are a characteristic of surface-grafted systems. At sufficient Cu catalyst concentrations, uniform brush growth is attained across different initiator densities, whereas decreased catalyst concentrations accentuate nonconcurrent initiation and propagation. These findings provide mechanistic insights into the interplay of initiator density, catalyst concentration, and surface curvature, offering design principles for tailoring the PGNP architecture. These results can guide the structural engineering of densely grafted surfaces, including nanoparticles and flat substrates, for applications in nanocomposites, photonics, and functional coatings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Concentrations and Health Implications of As, Hg, and Cd and Micronutrients in Rice and Emissions of CH 4 From Variably Flooded Paddies

Abstract The flooded soil conditions under which rice is typically grown are beneficial for boosting yield and decreasing herbicide inputs but may pose a food safety and environmental health risk. Flooded soils lead to reducing conditions and anaerobic metabolisms of soil microorganisms, which mobilizes arsenic from soil into soil solution, where it can be absorbed by rice roots and transported to grain. These conditions also promote the production and emission of methane (CH 4 )—a potent greenhouse gas. To evaluate how water management affects metal(loid) grain concentrations and CH 4 emissions, we conducted a 2‐year field study in which rice paddy water was managed under a range of soil redox conditions that spanned from flooded to non‐flooded. We observed that growing rice under less flooded conditions decreased CH 4 emissions and concentrations of grain total As, grain inorganic As, grain total Hg, and grain inorganic Hg relative to flooded conditions, with more reductions observed as conditions were drier; grain organic As and Hg (MeHg) species also decreased with drier conditions particularly in Year 1. However, the driest conditions tested led to a 50%–97% increase in grain Cd concentrations that exceeded the CODEX limit and grain yield reductions as high as 25% and 40% in Year 1 and 2, respectively. While concentrations of toxic metal(loid)s could be manipulated by water management, micronutrient concentrations were similar or decreased with drier conditions, potentially increasing grain Cd bioaccessibility to humans. Because practices for rice water management are gaining momentum, more research should monitor grain Cd levels along with micronutrients.

Environmental Sciences & Ecology↗

DOE OSTI2024

Quantifying concentration distributions in redox flow batteries with neutron radiography

Abstract The continued advancement of electrochemical technologies requires an increasingly detailed understanding of the microscopic processes that control their performance, inspiring the development of new multi-modal diagnostic techniques. Here, we introduce a neutron imaging approach to enable the quantification of spatial and temporal variations in species concentrations within an operating redox flow cell. Specifically, we leverage the high attenuation of redox-active organic materials (high hydrogen content) and supporting electrolytes (boron-containing) in solution and perform subtractive neutron imaging of active species and supporting electrolyte. To resolve the concentration profiles across the electrodes, we employ an in-plane imaging configuration and correlate the concentration profiles to cell performance with polarization experiments under different operating conditions. Finally, we use time-of-flight neutron imaging to deconvolute concentrations of active species and supporting electrolyte during operation. Using this approach, we evaluate the influence of cell polarity, voltage bias and flow rate on the concentration distribution within the flow cell and correlate these with the macroscopic performance, thus obtaining an unprecedented level of insight into reactive mass transport. Ultimately, this diagnostic technique can be applied to a range of (electro)chemical technologies and may accelerate the development of new materials and reactor designs.

Science & Technology - Other Topics↗

DOE OSTI2024

Safety and efficacy of C. muridarum vaccines adjuvanted with CpG-1826 and four concentrations of Montanide-ISA-720-VG

It is recommended that the adjuvant Montanide ISA 720 VG be used at a concentration of 70% v/v. At this concentration, Montanide causes at the site of immunization a local granuloma that can last for several weeks. To determine the safety and protective efficacy of a Chlamydia muridarum MOMP vaccine, formulated with CpG-1826 and four different concentrations of Montanide (70%, 50%, 30% and 10%), BALB/c (H-2 d ) female mice were immunized twice intramuscularly. Local reactogenicity was significant for vaccines formulated with 70% or 50% Montanide but not for those inoculated with 30% or 10% Montanide. Robust humoral and cell mediated memory immune responses were elicited by the 70%, 50% and 30% Montanide formulations. Mice were challenged intranasally with 10 4 C. muridarum inclusion forming units (IFU). Based on changes in body weight, lungs’s weight and number of IFU recovered, mice vaccinated with the 70%, 50% and 30% Montanide formulations were significantly protected, but not mice receiving 10% Montanide. To conclude, we recommend the 30% Montanide concentration to be tested in humans and animal models to determine its safety and efficacy, in comparison to the 70% Montanide concentration currently used. The 30% Montanide formulation could significantly facilitate licensing of this adjuvant for human use.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2024

Acid–base concentration swing for direct air capture of carbon dioxide

This work demonstrates the first experimental evidence of the acid–base concentration swing (ABCS) for direct air capture of CO 2 . This process is based on the effect that concentrating particular acid–base chemical reactants will strongly acidify solution, through Le Chatelier's principle, and result in outgassing absorbed CO 2 . After collecting the outgassed CO 2 , diluting the solution will result in a reversal of the acid–base reaction, basifying the solution and allowing for atmospheric CO 2 absorption. The experimental study examines a system that includes sodium cation as the alkalinity carrier, boric acid, and a polyol complexing agent that reversibly reacts with boric acid to strongly acidify solution upon concentration. Though the tested experimental system faces absorption rate and water capacity limitations, the ABCS process described here provides a basis for further process optimization. A generalized theoretical ABCS reaction framework is developed and different reaction orders and conditions are studied mathematically. Higher order reactions yield favorable cycle output results, reaching volumetric cycle capacity above 50 mM for third-order and 80 mM for fourth-order reactions. Optimal equilibrium constants are determined in order to guide alternative chemical searches and synthetic chemistry design targets. There is a substantial energetic benefit for reaction orders above the first, with second- and third-order ABCS cycles exhibiting a thermodynamic minimum work for the concentrating and outgassing steps around 150 kJ per mole of CO 2 . A significant advantage of the ABCS is that it can be driven through well-developed and widely-deployed desalination technologies, such as reverse osmosis, with opportunities for energy recovery when recombining the concentrated and diluted streams, and extraction can occur directly from the liquid phase upon vacuum application.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Beyond the Debye–Hückel limit: Toward a general theory for concentrated electrolytes

The phenomenon of underscreening in concentrated electrolyte solutions leads to a larger decay length of the charge–charge correlation than the prediction of Debye–Hückel (DH) theory and has found a resurgence of both theoretical and experimental interest in the chemical physics community. To systematically understand and investigate this phenomenon in electrolytes requires a theory of concentrated electrolytes to describe charge–charge correlations beyond the DH theory. We review the theories of electrolytes that can transition from the DH limit to concentrations where charge correlations dominate, giving rise to underscreening and the associated Kirkwood Transitions (KTs). In this perspective, we provide a conceptual approach to a theoretical formulation of electrolyte solutions that exploits the competition between molecular-informed short-range (SR) and long-range interactions. We demonstrate that all deviations from the DH limit for real electrolyte solutions can be expressed through a single function ΣQ that can be determined both theoretically and numerically. Importantly, ΣQ can be directly related to the details of SR interactions and, therefore, can be used as a tool to understand how differences in representations of interaction can influence collective effects. The precise function form of ΣQ can be inferred through a Gaussian field theory of both the number and charge densities. The resulting formulation is validated by experiment and can accurately describe the collective phenomenon of screening in concentrated bulk electrolytes. Importantly, the Gaussian field theory predictions of the screening lengths appear to be less than ∼1 nm at concentrations above KTs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Modeling the behavior of concentrated aqueous HNO 3 using machine learning interatomic potentials

We develop two multi-defect machine learning interatomic potentials (MLIPs) trained at the BLYP-D2 and PBE-D3 density functional theories using the DeepMD-kit, allowing for the investigation of structural and thermodynamic properties of nitric acid over a wide range of concentrations via molecular dynamics (MD) simulations. We directly compute the degree of dissociation, α, and pK a from MD simulations, revealing that HNO 3 behaves as a weaker acid at higher concentrations, noting that our standard-state pK a value is in excellent agreement with the experimental one. In general, good agreement is observed with experimental results such as α and density outside the training dataset, with only modest deviations at low-to-medium concentrations. We benchmark our custom multi-defect DeepMD MLIPs against foundational models MACE-MP0 and MACE-OFF23. The foundation models capture some aspects of HNO 3 /NO 3 − solvation in concentrated nitric acid but show noticeable density errors and miss subtle structural features relevant to spectroscopy, whereas the bespoke DeepMD MLIPs yield more compact solvation shells, reproduce density-concentration trends, and run ∼12–15× faster than MACE-MP0. Although classical FFs are still more efficient and match experimental densities better, they lack chemical reactivity and thus cannot predict α or pK a , underscoring the need for system-specific reactive MLIPs beyond universal MLIPs.

Dinpajooh, Mohammadhasan [Pacific Northwest Nation↗