Search NASA⌕ Search

SEARCH · Search NASA

Results for “downconversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

An Efficient, Highly Flexible Multi-Channel Digital Downconverter Architecture

In this innovation, a digital downconverter has been created that produces a large (16 or greater) number of output channels of smaller bandwidths. Additionally, this design has the flexibility to tune each channel independently to anywhere in the input bandwidth to cover a wide range of output bandwidths (from 32 MHz down to 1 kHz). Both the flexibility in channel frequency selection and the more than four orders of magnitude range in output bandwidths (decimation rates from 32 to 640,000) presented significant challenges to be solved. The solution involved breaking the digital downconversion process into a two-stage process. The first stage is a 2 oversampled filter bank that divides the whole input bandwidth as a real input signal into seven overlapping, contiguous channels represented with complex samples. Using the symmetry of the sine and cosine functions in a similar way to that of an FFT (fast Fourier transform), this downconversion is very efficient and gives seven channels fixed in frequency. An arbitrary number of smaller bandwidth channels can be formed from second-stage downconverters placed after the first stage of downconversion. Because of the overlapping of the first stage, there is no gap in coverage of the entire input bandwidth. The input to any of the second-stage downconverting channels has a multiplexer that chooses one of the seven wideband channels from the first stage. These second-stage downconverters take up fewer resources because they operate at lower bandwidths than doing the entire downconversion process from the input bandwidth for each independent channel. These second-stage downconverters are each independent with fine frequency control tuning, providing extreme flexibility in positioning the center frequency of a downconverted channel. Finally, these second-stage downconverters have flexible decimation factors over four orders of magnitude The algorithm was developed to run in an FPGA (field programmable gate array) at input data sampling rates of up to 1,280 MHz. The current implementation takes a 1,280-MHz real input, and first breaks it up into seven 160-MHz complex channels, each spaced 80 MHz apart. The eighth channel at baseband was not required for this implementation, and led to more optimization. Afterwards, 16 second stage narrow band channels with independently tunable center frequencies and bandwidth settings are implemented A future implementation in a larger Xilinx FPGA will hold up to 32 independent second-stage channels.

Goodhart, Charles E.↗

Frustrated Two-Photon Creation in a Time-Dependent Cavity

In the process of parametric downconversion, a high-energy photon is annihilated to create a pair of lower-energy photons within a nonlinear dielectric material. It was shown some years ago that this process can be modified by quantum interference, by reflecting the high-energy and low-energy light back into the dielectric. The suppression or enhancement of the downconversion rate is analogous to the phenomenon of inhibited spontaneous emission that occurs when an excited atom is placed in a cavity whose allowed modes cannot support the spontaneous emission. In this case, the atom remains excited--but then, how does it interact with the cavity? If the cavity mirror were replaced by a detector, could photons be counted immediately, or only after some time delay? Our experiment uses spontaneous downconversion, a 2-m long cavity, and a fast optical switch to obtain the answer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Halide Perovskites: A Progress Report on Photon Interconversion

Photon interconversion generally describes processes which change the wavelength of the emitted light upon irradiation, with a gain in photon energy (upconversion), or a splitting of the incident photon energy to create multiple photons (downconversion). The focus of this progress report is placed on halide perovskite materials and their role in upconversion by triplet-triplet annihilation and downconversion via singlet fission in organic semiconductors, and a short perspective is given into quantum cutting and lanthanide-based upconversion applications. The current advances are highlighted regarding halide perovskites and perovskite-inspired materials with varying framework and material dimensionalities, as relating to photon interconversion processes. Here, the majority of the literature is based on 3D perovskites, which leaves room for growth for perovskite materials with varying dimensionalities. Gaps in the current field are emphasized, leading to a bright outlook on future possibilities of coupling perovskites to photon interconversion mechanisms, which can open the door for future breakthroughs in this field.

36 MATERIALS SCIENCE↗

Infrared Photon Pair-Production in Ligand-Sensitized Lanthanide Nanocrystals

This report details spectroscopic characterizations of rare-earth, core-shell nanoparticles decorated with the f -element chelator 3,4,3-LI(1,2-HOPO). Evidence of photon downconversion is corroborated through detailed power dependence measurements, which suggest two-photon decay paths are active in these materials, albeit only representing a minority contribution of the sum luminescence, with emission being dominated by normal, Stokes' shifted fluorescence. Specifically, ultraviolet ligand photosensitization of Nd 3+ ions in a NaGdF 4 host shell results in energy transfer to a Nd 3+ /Yb 3+ -doped NaGdF 4 nanoparticle core. The population and subsequent decay of core, Yb 3+ 2 F 5/2 states result in a spectral shift of 620 nm, manifested in a NIR emission displaying luminescence profiles diagnostic of Yb 3+ and Nd 3+ excited state decays. Emphasis is placed on the generality of this material architecture for realizing ligand-pumped, multi-photon downconversion, with the Nd 3+ /Yb 3+ system presented here functioning as a working prototype for a design principle that may be readily extended to other lanthanide pairs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Energy-Efficient, High-Color-Rendering LED Lamps Using Oxyfluoride and Fluoride Phosphors

LED lamps using phosphor downconversion can be designed to replace incandescent or halogen sources with a 'warm-white' correlated color temperature (CCT) of 2700-3200 K and a color rendering index (CRI) greater than 90. However, these lamps have efficacies of {approx}70% of standard 'cool-white' LED packages (CCT = 4500-6000 K; CRI = 75-80). In this report, we describe structural and luminescence properties of fluoride and oxyfluoride phosphors, specifically a (Sr,Ca){sub 3}(Al,Si)O{sub 4}(F,O):Ce{sup 3+} yellow-green phosphor and a K{sub 2}TiF{sub 6}:Mn{sup 4+} red phosphor, that can reduce this gap and therefore meet the spectral and efficiency requirements for high-efficacy LED lighting. LED lamps with a warm-white color temperature (3088 K), high CRI (90), and an efficacy of {approx}82 lm/W are demonstrated using these phosphors. This efficacy is {approx}85% of comparable cool-white lamps using typical Y{sub 3}Al{sub 5}O{sub 12}:Ce{sup 3+}-based phosphors, significantly reducing the efficacy gap between warm-white and cool-white LED lamps that use phosphor downconversion.

36 MATERIALS SCIENCE↗

Longwave infrared (6.6–11.4 µm) dual-comb spectroscopy with 240,000 comb-mode-resolved data points at video rate

Using sub-3-cycle pulses from mode-locked Cr:ZnS lasers at λ ≈ 2.4 µm as a driving source, we performed high-resolution dual-frequency-comb spectroscopy in the longwave infrared (LWIR) range. A duo of highly coherent broadband (6.6–11.4 µm) frequency combs were produced via intrapulse difference frequency generation in zinc germanium phosphide (ZGP) crystals. Fast (up to 0.1 s per spectrum) acquisition of 240,000 comb-mode-resolved data points, spaced by 80 MHz and referenced to a Rb clock, was demonstrated, resulting in metrology grade molecular spectra of N 2 O (nitrous oxide) and CH 3 OH (methane). The key to high-speed massive spectral data acquisition was low intensity and phase noise of the LWIR combs and high (7.5%) downconversion efficiency, resulting in a LWIR power of 300 mW for each comb.

Vasilyev, Sergey (ORCID:0000000225203547)↗

Quantum-enhanced phase imaging without coincidence counting

Quantitative phase imaging provides a way to image transparent objects, such as biological cells, and measure their thickness. We report on a phase-imaging method that achieves twice the phase shift and approximately 1.7 times the spatial resolution of an equivalent spatially and temporally coherent classical quantitative phase-imaging system by using quantum interference between successive spontaneous parametric downconversion events in a nonlinear crystal. Furthermore, our method is approximately 1000 times faster than imaging the parametric downconversion photons in coincidence, which requires measurement times on the order of tens of hours. Our method may be useful for imaging sensitive transparent objects that require low illumination intensities at near-infrared and longer illumination wavelengths, such as photosensitive biological samples.

47 OTHER INSTRUMENTATION↗

Design and status of the RF-digitizer integrated circuit

An integrated circuit currently under development samples a bandpass-limited signal at a radio frequency in quadrature and then performs a simple sum-and-dump operation in order to filter and lower the rate of the samples. Downconversion to baseband is carried out by the sampling step itself through the aliasing effect of an appropriately selected subharmonic sampling frequency. Two complete RF digitizer circuits with these functions will be implemented with analog and digital elements on one GaAs substrate. An input signal, with a carrier frequency as high as 8 GHz, can be sampled at a rate as high as 600 Msamples/sec for each quadrature component. The initial version of the chip will sign-sample (1-bit) the input RF signal. The chip will contain a synthesizer to generate a sample frequency that is a selectable integer multiple of an input reference frequency. In addition to the usual advantages of compactness and reliability associated with integrated circuits, the single chip will replace several steps required by standard analog downconversion. Furthermore, when a very high initial sample rate is selected, the presampling analog filters can be given very large bandwidths, thereby greatly reducing phase and delay instabilities typically introduced by such filters, as well as phase and delay variation due to Doppler changes.

Rayhrer, B.↗

Digitally Synthesized Phased Antenna for Multibeam Global Positioning

In a system according to the proposed technique, the signal received by each element of the array antenna would be subjected to downconversion, and spread-spectrum demodulation and correlation as necessary; this processing would be performed separately from, and simultaneously with, similar processing of signals received by the other antenna elements. For the GPS implementation, following downconversion to baseband, the signals would be digitized, and all subsequent processing would be digital. In In the digital process, residual carriers would be removed and each signal would be correlated with a locally generated model pseudo random-noise code, all following normal GPS procedure. As part of this procedure, accumulated values would be added in software and the resulting signals would be phase-shifted in software by the amounts necessary to synthesize the desired antenna directional gain pattern of peaks and nulls. The principal advantage of this technique over the conventional radio-frequency-combining technique is that the parallel digital baseband processing of the signals from the various antenna elements would be a relatively inexpensive and flexible means for exploiting the inherent multiple-peak/multiple-null aiming capability of a phased-array antenna. In the original intended GPS application, the peaks and nulls could be directed independently for each GPS signal being tracked by the GPS receiver. This will improve the SNR simultaneously for each GPS signal being tracked while steering multiple nulls toward sources of interference. The technique could also be applied to other code-division multiple-access communication systems.

Charles E Dunn↗

Digitally synthesized phased antenna for multibeam global positioning

In a system according to the proposed technique (see figure), the signal received by each element of the array antenna would be subjected to downconversion, and spread-spectrum demodulation and correlation as necessary; this processing would be performed separately from, and simultaneously with, similar processing of signals received by the other antenna elements. For the GPS implementation, following downconversion to baseband, the signals would be digitized, and all subsequent processing would be digital. In the digital process, residual carriers would be removed and each signal would be correlated with a locally generated model pseudo random-noise code, all following normal GPS procedure. As part of this procedure, accumulated values would be added in software and the resulting signals would be phase-shifted in software by the amounts necessary to synthesize the desired antenna directional gain pattern of peaks and nulls. The principal advantage of this technique over the conventional radio-frequency-combining technique is that the parallel digital baseband processing of the signals from the various antenna elements would be a relatively inexpensive and flexible means for exploiting the inherent multiple-peak/multiple-null aiming capability of a phased-array antenna. In the original intended GPS application, the peaks and nulls could be directed independently for each GPS signal being tracked by the GPS receiver. This will improve the SNR simultaneously for each GPS signal being tracked while steering multiple nulls toward sources of interference. The technique could also be applied to other code-division multiple-access communication systems.

Dunn, Charles E.↗

Materials and Designs for High-Efficacy LED Light Engines

Cree, Inc. conducted a narrow-band downconverter (NBD) materials development and implementation program which will lead to warm-white LED light engines with enhanced efficacy via improved spectral efficiency with respect to the human eye response. New red (600-630nm) NBD materials could result in as much as a 20% improvement in warm-white efficacy at high color quality relative to conventional phosphor-based light sources. Key program innovations included: high quantum yield; narrow peak width; minimized component-level losses due to “cross-talk” and light scattering among red and yellow-green downconverters; and improved reliability to reach parity with conventional phosphors. NBD-enabled downconversion efficiency gains relative to conventional phosphors yielded an end-of-project LED light engine efficacy of >160 lm/W at room temperature and 35 A/cm2, with a correlated color temperature (CCT) of ~3500K and >90 CRI (Color Rending Index). NBD-LED light engines exhibited equivalent luminous flux and color point maintenance at >1,000 hrs. of highly accelerated reliability testing as conventional phosphor LEDs. A demonstration luminaire utilizing an NBD-based LED light engine had a steady-state system efficacy of >150 lm/W at ~3500K and >90 CRI, which exceeded the 2014 DOE R&D Plan luminaire milestone for FY17 of >150 lm/W at just 80 CRI.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

4‐1: Invited Paper: Role of Phosphorus Oxidation in Controlling the Luminescent Properties of Indium Phosphide Quantum Dots

Indium phosphide (InP) is the leading Cd‐free quantum dot material for application in photoluminescence downconversion display and lighting technologies. To date the performance of InP quantum dots (QDs) has lagged behind cadmium selenide in terms of both luminescence line width and quantum yield. Extensive studies in our lab have implicated kinetically persistent magic‐sized cluster intermediates as a leading contributor to polydispersity in these samples, providing new opportunities for achieving high color purity. Now, using a combination of solid‐state NMR spectroscopy and recently developed benchtop X‐ray emission spectroscopy, we have studied the evolution of oxidized phosphorus species during both synthesis and shell growth.

Cossairt, Brandi M.↗

Recent trends in binary and ternary rare-earth fluoride nanophosphors: How structural and physical properties influence optical behaviour

Rare-earth (RE) doped binary and ternary fluoride nanomaterials are currently receiving the highest attention as phosphor materials due to their potential for a wide range of photonic and biophotonic applications. This review article aims providing and introduction to the field and giving a critical overview about the latest developments in this fast evolving field. First, the underlying photoluminescence mechanisms like up- and downconversion (UC and DC), charge transfer (CT) and energy transfer (ET) between optically active trivalent RE ions are explained. Then, the influence of particle size and surface, shape and lattice strain, as well as the crystal phase of the host materials on the optical properties of rare earth based nanomaterias are illustrated. In addition, the effect of surface plasmon resonance (SPR) on the rare earth luminescence is discussed. In the following, different synthesis strategies which have been developed for tuning the crystal phase, shape, size, and morphology of the host nanomaterial are presented. The role of surface modification and functionalization for improving the luminescence intensity, stability, aqueous dispersity/dispersibility and biocompatibility of the materials is discussed. Lastly, photonic applications of RE-doped nanofluorides for energy efficient lighting, improved solar cells and biophotonic applications like photodynamic therapy, and biological detection techniques including in vivo and in vitro bioimaging are presented.

36 MATERIALS SCIENCE↗

Controllable synthesis and down-conversion properties of flower-like NaY(MoO{sub 4}){sub 2} microcrystals via polyvinylpyrrolidone-mediated

Double alkaline rare-earth molybdates NaY(MoO{sub 4}){sub 2} with multilayered flower-like architectures have been successfully synthesized via hydrothermal method in polyvinylpyrrolidone (PVP)-modified processes. The crystal structure and morphology of the obtained products were characterized by X-ray diffraction, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). It was found that reaction time and the amount of PVP have crucial influences on the morphology of the resulting novel microstructures. Under 450 nm excitation, Ho{sup 3+}/Yb{sup 3+} co-doped NaY(MoO{sub 4}){sub 2} samples exhibit 539 nm green emission and 960–1200 nm broadband near-infrared emission, corresponding to the characteristic lines of Ho{sup 3+} and Yb{sup 3+}, respectively. Moreover, increasing Yb{sup 3+} doping enhances the energy transfer efficiency from Ho{sup 3+} to Yb{sup 3+}. - Graphical abstract: Low and high-magnification SEM images demonstrate the perfect flower-like NaY(MoO{sub 4}){sub 2} prepared in the presence of PVP; Detailed TEM and HRTEM images further manifest the single-crystalline feature. Highlights: • NaY(MoO{sub 4}){sub 2} flower-like microstructures were synthesized by hydrothermal method using polyvinylpyrrolidone. • Polyvinylpyrrolidone induces the growth of the NaY(MoO{sub 4}){sub 2} to form multilayered architectures. • Flowerlike NaY(MoO{sub 4}){sub 2}: Ho{sup 3+}, Yb{sup 3+} phosphors were investigated as a downconversion layer candidate.

36 MATERIALS SCIENCE↗

Multimodal emissions from Tb{sup 3+}/Yb{sup 3+} co-doped lithium borate glass: Upconversion, downshifting and quantum cutting

This paper reports the optical properties of Tb{sup 3+}/Yb{sup 3+} co-doped lithium borate (LB) glass prepared by melt quench method. The absorption spectrum of the Yb{sup 3+} doped LB glass contains intense NIR band centered at 976 nm due to {sup 2}F{sub 7/2}→{sup 2}F{sub 5/2} transition. The emission spectra of the prepared glasses have been monitored on excitation with 266, 355 and 976 nm. The Yb{sup 3+} doped glass emits a broad NIR band centered at 976 nm whereas the Tb{sup 3+} doped glass gives off visible bands on excitations with 266 and 355 nm. When the Tb{sup 3+} and Yb{sup 3+} ions are co-doped together, the emission intensity in the visible region decreases whereas it increases in the NIR region significantly. The increase in the emission intensity in the NIR region is due to efficient cooperative energy transfer (CET) from Tb{sup 3+} to Yb{sup 3+} ions. The quantum cutting efficiency for Tb{sup 3+}/Yb{sup 3+} co-doped glass has been calculated and compared for 266 and 355 nm excitations. The quantum cutting efficiency is larger for 355 nm excitation (137%). The Tb{sup 3+}/Yb{sup 3+} co-doped LB glass also emits upconverted visible bands on excitation with 976 nm. The mechanisms involved in the energy transfer have been discussed using schematic energy level diagram. The Tb{sup 3+}/Yb{sup 3+} co-doped LB glass may be used in the optical devices and in solar cell for solar spectral conversion and behaves as a multi-modal photo-luminescent material. - Graphical abstract: The Tb{sup 3+}/Yb{sup 3+} co-doped lithium borate (LB) glass prepared by melt quench method emits upconverted visible emissions through upconversion CET from Yb{sup 3+} to Tb{sup 3+} ions and quantum cutting emissions through downconversion CET from Tb{sup 3+} to Yb{sup 3+} ions. Therefore, the Tb{sup 3+}/Yb{sup 3+} co-doped LB glass may find applications in optical devices and solar cell and behaves as a multi-modal photo-luminescent material. - Highlights: • The Tb{sup 3+}/Yb{sup 3+} co-doped lithium borate (LB) glass prepared by melt quench method. • The Tb{sup 3+}/Yb{sup 3+} co-doped glass gives QC emissions upon 266 and 355 nm excitations. • The Tb{sup 3+}/Yb{sup 3+} co-doped glass also emits intense green color on excitation with 976 nm. • The quantum cutting efficiency is larger for 355 nm excitation (137%). • The Tb{sup 3+}/Yb{sup 3+} co-doped glass may be used in solar cell and display devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Novel kinds of down/up-conversion luminescent rare earth doped fluoride BaMgF{sub 4}: RE{sup 3+} microcrystals

Graphical abstract: We achieve the liquid phase chemical synthesis of rare earth fluoride system BaMgF4: RE{sup 3+} microphosphors, which realize down/up-conversion luminescence. - Highlights: • Doped BaMgF{sub 4} microphosphors are firstly prepared by hydrothermal process. • Doped BaMgF{sub 4} nanosheets are firstly prepared by high temperature solution reaction. • The down-conversion luminescence is realized in the rare earth doped BaMgF{sub 4}. • The upconversion luminescence is realized in the rare earth doped BaMgF{sub 4}. - Abstract: In this paper, we realize the liquid-phase chemical synthesis of high-quality orthorhombic polycrystalline BaMgF{sub 4}: RE{sup 3+} (RE = Eu, Tb, Sm, Dy, Yb–Er/Tm) compounds with hydrothermal and high-temperature solution methods, respectively. The products from hydrothermal technology show the micrometer size while the products from hydrothermal technology present nanosheet morphology. The rare earth ions doped BaMgF{sub 4} from hydrothermal synthesis are discussed in details, which can realize the downconversion luminescence for doped Eu{sup 3+} or Tb{sup 3+} and upconversion luminescence for Yb{sup 3+}/Er{sup 3+} (Tm{sup 3+}), respectively. To our knowledge, the hydrothermal or high temperature solution synthesis and photoluminescence (Eu{sup 3+}, Tb{sup 3+} or Yb{sup 3+}/Er{sup 3+}(Tm{sup 3+})) of these fluoride systems are firstly reported.

36 MATERIALS SCIENCE↗

Tailoring UV-blue sensitization effect in enhancing near infrared emission in X, Yb3+: CaGa2O4 (X = 0, Eu3+, Bi3+, Cr3+) phosphor for solar energy conversion

Highlights: • Intense NIR emission from Yb{sup 3+}:CaGa{sub 2}O{sub 4} phosphor, useful in Si solar cell materials. • Effect of different sensitizers (Eu{sup 3+}, Bi{sup 3+} and Cr{sup 3+} ions) on Yb{sup 3+} ion emission. • Among these, Cr{sup 3+}/ Yb{sup 3+}:CaGa{sub 2}O{sub 4} phosphor is comparatively better NIR emitter. • Study of decay curve and thermoluminescence for analizing energy transfer dynamics. • NIR persistent luminescence for nearly fifteen minutes with germanium doping. - Abstract: This work presents a strategy to modify the UV–vis part of solar spectrum into near infrared (NIR) region- an operational region for silicon solar cells. CaGa{sub 2}O{sub 4}, a wide band gap material, has been doped with Yb{sup 3+} ion and different sensitizers (Bi{sup 3+}, Eu{sup 3+} and Cr{sup 3+}) in order to probe the NIR emitting properties through downconversion (DC) process. Of these, Cr{sup 3+} ion serves the purpose of maximum conversion efficiency in a best way owing to its wide excitation spectrum spanning over the entire UV-blue region. The mechanisms involved in obtained results are supported by the decay curve measurement and energy transfer studies. Further, germainum ion is also doped to get long afterglow Yb{sup 3+} ion emission. This doping develops deep-traps that can store excitation energy and transfer it cooperatively via DC to Yb{sup 3+} for a longer time. Thus, the material is a promising spectral converter for c-Si solar cells and other photochemical processes.

36 MATERIALS SCIENCE↗

Luminescence regulation mechanism of single layer NaYF4: Yb3+, Er3+@NaYF4 nanocrystals on Au nanolayer supported by anodic aluminum oxide template

Highlights: • Hybrid structure of AAO or Au sputtered AAO covered by single layer NCs was prepared. • By cavity quantum optics theory, luminescence regulation mechanism was proposed. • A novel idea for SPR induced luminescence regulation exploration has been presented. - Abstract: A kind of novel hybrid nanostructure of anodic aluminum oxide (AAO) template or Au sputtered AAO template covered by a single layer NaYF{sub 4}: Yb{sup 3+}, Er{sup 3+}@NaYF{sub 4} nanocrystals (NCs) was prepared by a facile strategy. Two kinds of available models that include with and without Au nanolayer were suggested for simulations. Significant downconversion luminescence (DCL) enhancement was observed when the supported template changed from single AAO to Au nanolayer covered AAO. A formula for luminescence enhancement factor based on the cavity quantum optics theory was constructed. With luminescence dynamics analyses, the DCL enhancement was ascribe to the main positive influence of excitation enhancement, besides the minor negative impact of the competition among the nonradiative loss of resonant cavity, the higher order mode loss of Purcell factor, and the increase of radiative transition rate. It proposed a new idea for surface plasmon (SP) induced luminescence regulation mechanism exploration.

77 NANOSCIENCE AND NANOTECHNOLOGY↗