Understanding the structural drivers governing glass–water interactions in borosilicate based model bioactive glasses
Not Available
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
Abstract not provided
We present firm evidence that the mechanism for the refractive-index increase in fused silica caused by irradiation with ultrafast intense laser pulses is the densification of glass. This conclusion is based on the correlation observed between the refractive-index values in waveguides in silica produced by focused femtosecond laser pulses and the shift of the central frequency of {omega}{sub 4} (TO) band (Si-O stretching mode) in micro-Raman spectra. These data were compared with the relation of the Raman shift to density and to refractive index changes in glasses modified by high pressure or irradiation. We conclude that the measured refractive-index increase in silica waveguides can be explained by densification of glass and exclude other hypothesis such as fictive-temperature effect, color center formation, etc.
We propose here to investigate the non-equilibrium viscosity of Ge-Se glasses under and after light irradiation. Ge{sub 10}Se{sub 90} and Ge{sub 20}Se{sub 80} fibers have been aged in the dark and under ambient light, over months. During aging, both the relaxation of enthalpy and the viscosity have been investigated. The viscosity was measured by shear relaxation-recovery tests allowing the measurement of non-equilibrium viscosity. When Ge{sub 10}Se{sub 90} glass fibers are aged under irradiation, a relatively fast fictive temperature decrease is observed. Concomitantly, during aging under irradiation, the non-equilibrium viscosity increases and reaches an equilibrium after two months of aging. This viscosity increase is also observed in Ge{sub 20}Se{sub 80} fibers. Nevertheless, this equilibrium viscosity is far below the viscosity expected at the configurational equilibrium. As soon as the irradiation ceases, the viscosity increases almost instantaneously by about one order of magnitude. Then, if the fibers are kept in the dark, their viscosity slowly increases over months. The analysis of the shear relaxation functions shows that the aging is thermorheologically simple. On the other side, there is no simple relaxation between the shear relaxation functions measured under irradiation and those measured in the dark. These results clearly suggest that a very specific photoinduced aging process occurs under irradiation. This aging is due to photorelaxation. Nevertheless, the viscosity changes are not solely correlated to photoaging and photorelaxation. A scenario is proposed to explain all the observed viscosity evolutions under and after irradiation, on the basis of photoinduced transient defects.
X-ray scattering has been used to characterize glassy itraconazole (ITZ) prepared by cooling at different rates. Faster cooling produces ITZ glasses with lower (or zero) smectic order with more sinusoidal density modulation, larger molecular spacing, and shorter lateral correlation between the rod-like molecules. We find that each glass is characterized by not one, but two fictive temperatures T f (the temperature at which a chosen order parameter is frozen in the equilibrium liquid). The higher T f is associated with the regularity of smectic layers and lateral packing, while the lower T f with the molecular spacings between and within smectic layers. This indicates that different structural features are frozen on different timescales. The two timescales for ITZ correspond to its two relaxation modes observed by dielectric spectroscopy: the slower δ mode (end-over-end rotation) is associated with the freezing of the regularity of molecular packing and the faster α mode (rotation about the long axis) with the freezing of the spacing between molecules. Finally, our finding suggests a way to selectively control the structural features of glasses.
Recent computational and laboratory experiments have shown that brittle-ductile transitions in the notch toughnesses of metallic glasses such as Vitreloy 1 are strongly sensitive to the initial effective disorder (or “fictive”) temperature. Glasses with lower effective temperatures are weak and brittle; those with higher effective temperatures are strong and ductile. The analysis of this phenomenon presented here examines the onset of fracture at the tip of a notch as predicted by the shear-transformation-zone theory of spatially varying plastic deformation. The central ingredient of this analysis is an approximation for the dynamics of the plastic zone formed by stress concentration at the notch tip. As a result, this zone first shields the tip but then, with increasing stress, expands suddenly, producing a discontinuous transition between brittle and ductile failure in satisfactory agreement with the numerical and experimental observations.
In most cases, cylindrical structures with a gradient refractive index (GRIN) are formed on the basis of diffusion technology. The refractive index and the residual stresses in them are axially symmetrical. The distortion determined by diffusion and the thermal internal stresses in them are simulated by the fictive temperature of residual stresses. The use of the integral photoelasticity for the reconstruction of residual stresses in GRIN lenses is usually limited to the case of a planar deformed state. In this study, this algorithm is extended to the case of the axial change of residual stresses. It is assumed that the illumination procedure is carried out in the sample cross section. The optical problem is solved within the quasi-isotropic approximation. The reconstruction is based on measuring the characteristic parameters of polarized light passed through the sample and on the combined solution of the thermoelasticity problem.
Accurate modeling of viscoelasticity remains an important consideration for a variety of materials (e.g. polymers and inorganic glasses). As such, over the previous decades a substantial body of work has been dedicated to developing appropriate constitutive models for viscoelasticity ranging from initial considerations of linear thermoviscoelasticity to more complex non-linear formulations incorporating fictive temperatures or potential energy clocks including the use of both internal state variable(ISV) and hereditary integral representations. Nonetheless, relatively limited (in comparison to plasticity) attention has been paid to the numerical integration of such schemes. In terms of integral based formulations, Taylor et al. first considered the problem of the integration of a linear viscoelasticity model. That work focused on the integration of the hereditary integrals and demonstrated improved performance of the new scheme with a custom finite element code over an existing finite difference reference. Chambers and Becker, using a free volume based shift factor, also considered the integration of the hereditary integrals and the impact on the problem of a pressurized thick-walled cylinder and developed an adaptive scheme to bound the error. Chambers later developed three-point Gauss and composite integration schemes for the hereditary integrals and noted improved accuracy. With respect to ISV-based schemes, formulations for the non-linear Schapery model have been proposed. However, in those efforts greater attention was paid to convergence of the non-linear solution scheme than impact of numerical integration. Various authors (e.g. Holzapfel and Simo and Hughes) have also studied the use of convolution integrals with differential forms of ISVs for temperature-independent formulations. Regardless, while the "potential energy clock" (PEC) and "simplified potential energy clock"(SPEC) models have been used to study a variety of non-linear responses (e.g.), limited attention has been paid to the numerical performance. As will be discussed later, the "clock" at the center of the formulations includes temperature and complex history dependence making the numerical integration of such a model even more challenging. Thus, in the current work an initial effort towards characterizing the numerical integration of the constitutive model through simplified problems is performed. To that end, in Section 2 the theory of the model is briefly presented while the numerical integration is discussed in Section 3. Results of various studies characterizing the numerical behavior and performance are then given in Section 4. Finally, some concluding remarks and thoughts for follow on works are provided in Section 5.
Time-dependent, viscoelastic responses of materials like polymers and glasses have long been studied. As such, a variety of models have been put forth to describe the behavior including simple rheological models (e.g. Maxwell, Kelvin), linear "fading memory" theories, and hereditary integral based linear thermal viscoelastic approaches as well as more recent nonlinear theories that are either integral, fictive temperature, or differential internal state variable based. The current work details a new LINEAR_THERMOVISCOELASTIC model that has been added to LAME. This formulation represents a viscoelastic theory that neglects some of the phenomenological details of the PEC/SPEC models in favor of efficiency and simplicity. Furthermore, this new model is a first step towards developing "modular" viscoelastic capabilities akin to those available with hardening descriptions for plasticity models in LAME. Specifically, multiple different (including user-defined) shift-factor forms are implemented with each being easily selected via parameter specification rather than requiring distinct material models.
Fused silica micro-structural changes associated with localized 10.6 {micro}m CO{sub 2} laser heating are reported. Spatially-resolved shifts in the high-frequency asymmetric stretch transverse-optic (TO) phonon mode of SiO{sub 2} were measured using confocal Raman microscopy, allowing construction of axial fictive temperature (T{sub f}) maps for various laser heating conditions. A Fourier conduction-based finite element model was employed to compute on-axis temperature-time histories, and, in conjunction with a Tool-Narayanaswamy form for structural relaxation, used to fit T{sub f}(z) profiles to extract relaxation parameters. Good agreement between the calculated and measured T{sub f} was found, yielding reasonable values for relaxation time and activation enthalpy in the laser-modified silica.
Niobium pentoxide (Nb{sub 2}O{sub 5}) increases the chemical and thermal stability of otherwise hygroscopic alkali phosphate glasses and also enhances the conduction characteristics. Ion dynamics and structural relaxation have been investigated for mol%50Li{sub 2}0-45P{sub 2}0{sub 5}-5Nb{sub 2}O{sub 5}. The non-linearity parameter 'x' in the Tool-Narayanaswamy model is evaluated using the dependence of fictive and glass transition temperatures on the cooling and heating rates.
The typical ionic liquid, 1-ethyl-3-methyl imidazolium nitrate (EMIM-NO{sub 3}), was examined by molecular dynamics simulations of an all-atomistic model to show the characteristics of networks of cages and/or bonds in the course of vitrification of this fragile glass-former. The system shows changes of dynamics at two characteristic temperatures, T{sub B} (or T{sub c}) and the glass transition temperature T{sub g}, found in other fragile glass forming liquids [K. L. Ngai and J. Habasaki, J. Chem. Phys. 141, 114502 (2014)]. On decreasing temperature, the number of neighboring cation-anion pairs, N{sub B}, within the first minimum of the pair correlation function, g(r){sub min}, increases. On crossing T{sub B} (>T{sub g}), the system volume and diffusion coefficient both show changes in temperature dependence, and as usual at T{sub g}. The glass transition temperature, T{sub g}, is characterized by the saturation of the total number of “bonds,” N{sub B} and the corresponding decrease in degree of freedom, F = [(3N − 6) − N{sub B}], of the system consisting of N particles. Similar behavior holds for the other ion-ion pairs. Therefore, as an alternative, the dynamics of glass transition can be interpreted conceptually by rigidity percolation. Before saturation occurring at T{sub g}, the number of bonds shows a remarkable change at around T{sub B}. This temperature is associated with the disappearance of the loosely packed coordination polyhedra of anions around cation (or vice versa), related to the loss of geometrical freedom of the polyhedra, f{sub g}, of each coordination polyhedron, which can be defined by f{sub g} = [(3N{sub V} − 6) − N{sub b}]. Here, 3N{sub v} is the degree of freedom of N{sub V} vertices of the polyhedron, and N{sub b} is number of fictive bonds. The packing of polyhedra is characterized by the soft percolation of cages, which allows further changes with decreasing temperature. The power spectrum of displacement of the central ion in the cage is found to be correlated with the fluctuation of N{sub b} of cation-cation (or anion-anion) pairs in the polyhedron, although the effect from the coordination shells beyond the neighboring ions is not negligible.
A thermodynamic model for the U1-yGdyO2 x phase was developed using the compound energy formalism (CEF) with a three sublattice approach and is an extension of the already successful CEF representation of the fluorite UO2 x phase. The Gibbs energies for the end-members created by the addition of Gd to the cation sublattice are estimated using the lattice stability of a fictive gadolinium oxide fluorite structure compound from density functional theory. The model interaction parameters are determined from reported oxygen potential-temperature-composition measurements. The calculated results are in good agreement with the experimental data and the trends are consistent. The CEF for the U1-yGdyO2 x solid solution can be combined with other representations of actinide and fission product containing fluorite UO2 phases to develop multi-component models within the CEF framework.
The structure of the model titanate glass former BaTi2O5 has been studied over a wide temperature (T) range in the molten, supercooled, and glassy states under conditions of aerodynamic levitation. Both high-energy X-ray diffraction and Ti K-edge X-ray absorption spectroscopy reveal a continuous structural transition involving reduction of the cation-oxygen (and oxygen-cation) average coordination numbers and bond lengths with increasing T. Ti-0 coordination in the moderately supercooled and equilibrium melt follows a linear trend n(Tio) = 5.4(1)- [3.5(7) x 10(-4)]T [K] (1300 <= T <= 1830 K, T-g = 960 K, T-m = 1660 K). Comparison to the melt-quenched glass implies an increase in partial derivative n(Tio)/partial derivative T at lower T, as T-g is approached from above. Both Ba-0 coordination and bond length also decrease at higher T, and the role of Ba addition is to reduce n(Tio) below its value in pure molten TiO2, which is related to the presence of density maxima in molten BaO-TiO2. Density measurements made by imaging of the levitated melt yielded rho(T) = 4.82(55)- 0.0004(3)T in units of K and g cm(-3). While BaTi2O5 glass likely consists of a fully connected Ti-0 network, free of nonbridging oxygen (NBO) [OTi1 and with at least 13(4)% [OTi3] triclusters, the 1835(40) K equilibrium melt contains at least 10(4)% NBO along with 90(4)% bridging oxygen [OTi2]. The results highlight the fact that glasses can be considered as structural analogues of melts only for those melts deeply supercooled into the glass transition region. The results imply possible fictive T dependence of titanate glass structure, suggesting applications as, e.g., laser written waveguides with large refractive indices and refractive index contrasts. The temperature-dependent structure further implies a super-Arrhenian melt viscosity with consequences for glass manufacture, titanate-rich slags produced in iron smelting, TiO2-bearing magmas, and by analogy silicate melts at high pressures, as found in planetary interiors.
The model of fictive ideal components is used to determine Gibbs free energies of formation of pyrope and Al2O3-enstatite from the experimental data on coexisting garnet and orthopyroxene and orthopyroxene and spinel in the temperature range 1200-1600 K. It is noted that Al2O3 forms an ideal solution with MgSiO3. These thermochemical data are found to be consistent with the Al2O3 isopleths that could be drawn using most recent experimental data and with the reversed experimental data on the garnet-spinel field boundary.
This paper details the very first in-depth study of the glass transition temperature (T g ) for planetary balled milled (PBM) Na 4 P 2 S 7-x O x (NaPSO), where 0 ≤ x ≤ 7, glasses. For 0 ≤ x ≤ 5, fully amorphous, homogeneous, and chemically reacted compositions can be prepared. For samples with 5 < x ≤ 7, partially amorphous but fully chemically reacted glass-ceramics can be produced. The reproducible, thermally cyclable onset T g and the onset crystallization temperature, T c , were investigated as a function of the composition and of the short-range order (SRO) structures of the glasses. Additionally, we examined the extreme sub-T g exothermic relaxations present due to the high energy milling processing and correspondingly high effective quenching rate. Using a differential scanning calorimeter (DSC) and scanning from well below the onset T g , the glasses are observed to relax exothermally below T g . The integrated relaxation enthalpy, ΔH rel , is ~ 0 for the x = 2 glass, but is significantly exothermic for lower and higher values of x. Once the high fictive state of these glasses has been erased by scanning to above the T g , but below the T c of the glass, the DSC scans of the glasses recover normal behavior for a normally cooled glass without any relaxation exotherm. The T g s of these glasses remain relatively constant for 0 ≤ x ≤ 3, but for glasses with 3 < x ≤ 5, T g increases sharply following the combined effects of the phosphate chain length increasing caused by the formation of bridging oxygens and the increasing concentration of more charge dense non-bridging oxygens (NBOs). For x > 5, both T g and Tc decrease sharply, becoming nearly identical at x = 7 where glass formation essentially ceases. For smaller values of x, T c increases with both chain length and the structural complexity of the composition but decreases sharply for glass-ceramics of x > 5.