Search NASA⌕ Search

SEARCH · Search NASA

Results for “floors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Physical and chemical test results of electrostatic safe flooring materials

This test program was initiated because a need existed at the Kennedy Space Center (KSC) to have this information readily available to the engineer who must make the choice of which electrostatic safe floor to use in a specific application. The information, however, should be of value throughout both the government and private industry in the selection of a floor covering material. Included are the test results of 18 floor covering materials which by test evaluation at KSC are considered electrostatically safe. Tests were done and/or the data compiled in the following areas: electrostatics, flammability, hypergolic compatibility, outgassing, floor type, material thickness, and available colors. Each section contains the test method used to gather the data and the test results.

Gompf, R. H.↗
NASA NTRS1991

Igneous intrusion models for floor fracturing in lunar craters

Lunar floor-fractured craters are primarily located near the maria and frequently contain ponded mare units and dark mantling deposits. Fracturing is confined to the crater interior, often producing a moat-like feature near the floor edge, and crater depth is commonly reduced by uplift of the crater floor. Although viscous relaxation of crater topography can produce such uplift, the close association of modification with surface volcanism supports a model linking floor fracture to crater-centered igneous intrusions. The consequences of two intrusion models for the lunar interior are quantitatively explored. The first model is based on terrestrial laccoliths and describes a shallow intrusion beneath the crater. The second model is based on cone sheet complexes where surface deformation results from a deeper magma chamber. Both models, their fit to observed crater modifications and possible implications for local volcanism are described.

Wichman, R. W.↗
NASA NTRS2009

Investigation of Seal-to-Floor Effects on Semi-Span Transonic Models

In an effort to achieve the maximum possible Reynolds number (Re) when conducting production testing for flight loads aerodynamic databases, it has been the preferred practice of The Boeing Company / Commercial Airplanes (BCA) -- Loads and Dynamics Group since the early 1990's to test large scale semi-span models in the 11- By 11-Foot Transonic Wind Tunnel (TWT) leg of the Unitary Plan Wind Tunnel (UPWT) at the NASA Ames Research Center (ARC). There are many problems related to testing large scale semi-span models of high aspect ratio flexible transport wings, such as; floor boundary layer effects, wing spanwise wall effects, solid blockage buoyancy effects, floor mechanical interference effects, airflow under the model effects, or tunnel flow gradient effects. For most of these issues, BCA has developed and implemented either standard testing methods or numerical correction schemes and these will not be discussed in this document. Other researchers have reported on semi-span transonic testing correction issues, however most of the reported research has been for low Mach testing. Some of the reports for low Mach testing address the difficult problem of preventing undesirable airflow under a semi-span model while ensuring unrestricted main balance functionality, however, for transonic models this issue has gone unresolved. BCA has been cognizant for sometime that there are marked differences in wing pressure distributions from semi-span transonic model testing than from full model or flight testing. It has been suspected that these differences are at least in part due to airflow under the model. Previous efforts by BCA to address this issue have proven to be ineffective or inconclusive and in one situation resulted in broken hardware. This paper reports on a Boeing-NASA collaborative investigation based on a series of small tests conducted between June 2006 and November 2007 in the 11 by 11 foot Transonic Wind Tunnel at NASA Ames on three large commercial jet transport configurations to assess the effects of sealing a semi-span model to the floor and to investigate efficient sealing and testing techniques. This document will show how sealing the model to the floor has a small but remarkably far reaching spanwise effect on wing pressures, wing local section forces and wing force summations.

Sleppy, Mark A.↗
NASA NTRS2017

Complex Volcanism at Oppenheimer U Floor-Fractured Crater

Recent remote sensing studies have identified complex volcanism in the floor-fractured crater (FFC) Oppenheimer U, located in the northwest floor of Oppenheimer crater (35.2degS, 166.3degW, 208 km dia., Figure 1) within the "South Pole - Aitken basin" (SPA) region of the lunar far side. Up to 15 sites of pyroclastic volcanism have been identified in the floor of Oppenheimer crater. Studies of Moon Mineralogy Mapper data (M3, 0.4-3 microns, 86 bands, [5]) indicated that the pyroclastic deposits are comprised of mixtures of clinopyroxene and iron-rich glass, with the Oppenheimer U deposit showing variable composition within the FFC and having the most iron-rich volcanic glass thus far identified on the Moon. Here we examine the floor of Oppenheimer U in more detail and show evidence for possible multiple eruptive vents.

Gaddis, L. R.↗
NASA NTRSDate not supplied

Exploring the Jezero Crater Floor: Overview of Results from the Mars 2020 Perseverance Rover’s First Science Campaign

The Perseverance rover embarked on its first science campaign after landing in Jezero crater on February 18, 2021 and completing ~90 days of commissioning and Ingenuity helicopter activities. During this first campaign, Perseverance explored a large swath of Jezero’s crater floor, investigating and sampling several of the topographically lowest, and potentially oldest, rocks within the crater. Crater floor units: Perseverance explored the Máaz and Séítah formations (previously mapped as the Crater Floor Fractured Rough; Cf-fr and Crater Floor Fractured 1; Cf-f-1 units[1]). These are both widespread units in the crater that potentially correlate with units outside Jezero [2-4]. The Máaz fm. was distinguished from orbit by its mafic composition and densely cratered surface, and has various hypothesized origins, including lava flows[2] and volcaniclastic airfall [3]. The Máaz fm. is important for providing age/stratigraphic constraints on the Jezero western delta. If igneous, returned Máaz fm. samples may aid in calibrating the Mars crater chronology [2,5]and understanding Mars paleomagnetism and early igneous processes(see [6]). The Séítah fm. is olivine-bearing and has been interpreted to be related to a regional unit exposed along the inner rim of Jezero crater walls and occurs more broadly in the Nili Planum and Nili Fossae region. The olivine-bearing unit and its possible correlatives has a wide range of hypothesized origins including volcaniclastic airfall, impact melt, or aeolian and fluvial deposits [2-4,7,8]. The Séítahfm.is likely the oldest unit accessible to Perseverance and represents an important part of Jezero’s pre-delta-lacustrine history. As in the Máaz fm., the lithochemistry of the samples will help studies of early Mars igneous processes. The olivine-and carbonate-bearing components of this unit may also signify habitable conditions early in Jezero’s history, samples of which would be of high geochemical and astrobiological significance, as well as for understanding the martian carbon cycle(see [9]).

Mars 2020↗
NASA NTRS2023

Overview and Results From the Mars 2020 Perseverance Rover's First Science Campaign on the Jezero Crater Floor

The Mars 2020 Perseverance rover landed in Jezero crater on 18 February 2021. After a 100-sol period of commissioning and the Ingenuity Helicopter technology demonstration, Perseverance began its first science campaign to explore the enigmatic Jezero crater floor, whose igneous or sedimentary origins have been much debated in the scientific community. This paper describes the campaign plan developed to explore the crater floor's Máaz and Séítah formations and summarizes the results of the campaign between sols 100–379. By the end of the campaign, Perseverance had traversed more than 5 km, created seven abrasion patches, and sealed nine samples and a witness tube. Analysis of remote and proximity science observations show that the Máaz and Séítah formations are igneous in origin and composed of five and two geologic members, respectively. The Séítah formation represents the olivine-rich cumulate formed from differentiation of a slowly cooling melt or magma body, and the Máaz formation likely represents a separate series of lava flows emplaced after Séítah. The Máaz and Séítah rocks also preserve evidence of multiple episodes of aqueous alteration in secondary minerals like carbonate, Fe/Mg phyllosilicates, sulfates, and perchlorate, and surficial coatings. Post-emplacement processes tilted the rocks near the Máaz-Séítah contact and substantial erosion modified the crater floor rocks to their present-day expressions. Results from this crater floor campaign, including those obtained upon return of the collected samples, will help to build the geologic history of events that occurred in Jezero crater and provide time constraints on the formation of the Jezero delta.

Mars 2020↗
NASA NTRS2024

A Floor in the Sun's Photospheric Magnetic Field: Implications for an Independent Small-scale Dynamo

Clette recently showed that F 10.7 systematically approaches a quiet Sun daily value of 67 solar flux units (sfu) at solar minima as the number of spotless days on the Sun increases. Previously, a floor of ∼2.8 nT had been proposed for the solar wind (SW) magnetic field strength (B). F 10.7 , which closely tracks the Sun's unsigned photospheric magnetic flux, and SW B exhibit different relationships to their floors at 11 yr solar minima during the last ∼50 yr. While F 10.7 approaches 67 sfu at each minimum, the corresponding SW B is offset above ∼2.8 nT by an amount approximately proportional to the solar polar field strength—which varied by a factor of ∼2.5 during this interval. This difference is substantiated by ∼130 yr of reconstructed F 10.7 (via the range of the diurnal variation of the East-component (rY) of the geomagnetic field) and SW B (based on the interdiurnal variability geomagnetic activity index). For the last ∼60 yr, the contribution of the slow SW to SW B has exhibited a floor-like behavior at ∼2 nT, in contrast to the contributions of coronal mass ejections and high-speed streams that vary with the solar cycle. These observations, as well as recent SW studies based on Parker Solar Probe and Solar Dynamics Observatory data, suggest that (1) the Sun has a small-scale turbulent dynamo that is independent of the 11 yr sunspot cycle; and (2) the small-scale magnetic fields generated by this nonvarying turbulent dynamo maintain a constant open flux carried to the heliosphere by the Sun's floor-like slow SW.

Solar magnetic fields↗
NASA NTRSDate not supplied

Reflectivity characterization of in-flow acoustic floor treatment for the NASA Langley 14- by 22-Foot Subsonic Tunnel

An experimental campaign was performed to assess acoustic modifications to the NASA Langley Research Center 14- by 22-Foot Subsonic Tunnel. Recent acoustic test campaigns in this facility have emphasized the reduction of aerodynamic noise due to flow scrubbing across acoustically treated floor baskets. However, the measures implemented to address this noise contaminant have resulted in the installation of floor basket coverings of high acoustic reflectivity. Therefore, a controlled test campaign was performed to identify a suitable acoustic basket configuration in terms of both acoustic absorptivity and reduced flow scrubbing noise. This test campaign was conducted in two phases: the first in an anechoic chamber facility on a single acoustic basket panel to identify a notional configuration of acceptable absorptivity, and the second in a complete floor basket installation checkout test in the NASA Langley 14- by 22-Foot Subsonic Tunnel. Results show that the newly implemented floor treatment exhibits suitable performance in both desired categories of acoustic absorptivity and reduced flow scrubbing noise. This campaign has also validated the effectiveness and usefulness of the anechoic chamber test configuration as a means of assessing acoustic reflections at oblique angles of incidence.

Nikolas S Zawodny↗
NASA NTRS1973

Pulsations, interpulsations, and sea-floor spreading.

It is postulated that worldwide transgressions (pulsations) and regressions (interpulsations) through the course of geologic time are related to the elevation and subsidence of oceanic ridge systems and to sea-floor spreading. Two multiple working hypotheses are advanced to explain major transgressions and regressions and the elevation and subsidence of oceanic ridge systems. One hypothesis interrelates the sea-floor spreading hypothesis to the hypothesis of sub-Mohorovicic serpentinization. The second hypothesis relates the sea-floor spreading hypothesis to a hypothesis involving thermal expansion and contraction.

Pessagno, E. A., Jr.↗
NASA NTRS1982

Analytical prediction of the interior noise for cylindrical models of aircraft fuselages for prescribed exterior noise fields. Phase 2: Models for sidewall trim, stiffened structures and cabin acoustics with floor partition

An airplane interior noise prediction model is developed to determine the important parameters associated with sound transmission into the interiors of airplanes, and to identify apropriate noise control methods. Models for stiffened structures, and cabin acoustics with floor partition are developed. Validation studies are undertaken using three test articles: a ring stringer stiffened cylinder, an unstiffened cylinder with floor partition, and ring stringer stiffened cylinder with floor partition and sidewall trim. The noise reductions of the three test articles are computed using the heoretical models and compared to measured values. A statistical analysis of the comparison data indicates that there is no bias in the predictions although a substantial random error exists so that a discrepancy of more than five or six dB can be expected for about one out of three predictions.

Pope, L. D.↗
NASA NTRS1983

Aircraft interior noise models - Sidewall trim, stiffened structures, and cabin acoustics with floor partition

As part of the continuing development of an aircraft interior noise prediction model, in which a discrete modal representation and power flow analysis are used, theoretical results are considered for inclusion of sidewall trim, stiffened structures, and cabin acoustics with floor partition. For validation purposes, predictions of the noise reductions for three test articles (a bare ring-stringer stiffened cylinder, an unstiffened cylinder with floor and insulation, and a ring-stringer stiffened cylinder with floor and sidewall trim) are compared with measurements.

Pope, L. D.↗
NASA NTRS1982

Impact into the earth's ocean floor - Preliminary experiments, a planetary model, and possibilities for detection

Impact processes and plate tectonics are invoked in an experimental study of craters larger than 100 km in diameter on the ocean floor. Although the results obtained from 22-caliber (383 m/sec) ammunition experiments using dense, saturated sand as a target medium cannot be directly scaled to large events, the phenomenology exhibited is that expected of actual craters on the ocean floor: steep, mixed ejecta plume, gravitational adjustment of the crater to form a shallow basin, and extensive reworking of the ejecta, rim, and floor materials by violent collapse of the transient water cavity. Excavation into the mantle is predicted, although asthenospheric influence on outer ring formation is not. The clearest geophysical signature of such a crater is not topography; detection should instead be based on gravity and geoid anomalies due to uplift of the Moho, magnetic anomalies, and seismic resolution of the Moho uplift and crater formation fault planes.

Mckinnon, W. B.↗
NASA NTRS1986

Crash Tests of Protective Airplane Floors

Energy-absorbing floors reduce structural buckling and impact forces on occupants. 56-page report discusses crash tests of energy-absorbing aircraft floors. Describes test facility and procedures; airplanes, structural modifications, and seats; crash dynamics; floor and seat behavior; and responses of anthropometric dummies seated in airplanes. Also presents plots of accelerations, photographs and diagrams of test facility, and photographs and drawings of airplanes before, during, and after testing.

Carden, H. D.↗
NASA NTRS1989

Making A Precisely Level Floor

Floor-pouring procedure yields large surface level, smooth, and hard. Floor made of self-leveling, slow-curing epoxy with added black pigment. Epoxy poured to thickness no greater than 0.33 in. (0.84 cm) on concrete base. Base floor seasoned, reasonably smooth and level, and at least 4 in. (10cm) thick. Base rests on thermal barrier of gravel or cinders and contains no steel plates, dividers, or bridges to minimize thermal distortion. Metal retaining wall surrounds base.

Simpson, William G.↗
NASA NTRS1993

Large floor-fractured craters and isostatic crater modification: Implications for lithospheric thickness on Venus

Several of the largest craters on Venus, including Mead, Meitner and Isabella, exhibit well-developed floor fracture patterns combining a central set of radial features with a peripheral set of concentric fractures. This pattern strongly resembles the fracture patterns observed in the largest floor-fractured craters on the Moon (e.g. Humboldt, Gauss, Petavius). Although most lunar floor-fractured craters apparently reflect crater modification by igneous intrusions and volcanism, we propose that the fractures in these larger craters represent domical flexure events in response to post-impact isostatic uplift. Since the extent of uplift and surface failure in this model depends on both the size of the basin cavity and the local lithospheric thickness, this interpretation also provides a means for constraining lithospheric thicknesses on Venus. Based on the apparent onset diameter of isostatic crater modification, we derive lithospheric thickness estimates for the Moon of approximately 80 - 100 km, and for Venus of approximately 50 - 70 km.

Wichman, R. W.↗
NASA NTRS1993

Regional sedimentological variations among dark crater floor features: Toward a model for modern eolian sand distribution on Mars

It has been known since 1972 that many Martian craters have dark features on their floors, and that when seen at higher image resolution, some of the dark units are dune fields. Interpretations of thermal inertia derived from Viking Infrared Thermal Mapper (IRTM) data have been used to suggest that many dark intracrater features, including those where dunes are not observed in images, contain some amount of sand or particles in the range 0.1-10 mm. However, it has never been known if all these dark features consist of dunes. We assembled a set of 108 carefully constrained Viking IRTM observations for dark crater-floor units. The data and selection criteria are described in detail elsewhere. Studied in conjunction with Mariner 9 and Viking orbiter images of each crater, these data indicate that the dark crater-floor units in some regions have different thermal properties than those in other regions. Thermal inertias were computed using the Viking thermal model of H. H. Kieffer and corrected for atmospheric CO2 effects using the relationship for a dust-free atmosphere shown by Haberle and Jakosky.

Edgett, K. S.↗
NASA NTRS1995

Finite Element Analysis of an Energy Absorbing Sub-floor Structure

As part of the Advanced General Aviation Transportation Experiments program, the National Aeronautics and Space Administration's Langley Research Center is conducting tests to design energy absorbing structures to improve occupant survivability in aircraft crashes. An effort is currently underway to design an Energy Absorbing (EA) sub-floor structure which will reduce occupant loads in an aircraft crash. However, a recent drop test of a fuselage specimen with a proposed EA sub-floor structure demonstrated that the effects of sectioning the fuselage on both the fuselage section's stiffness and the performance of the EA structure were not fully understood. Therefore, attempts are underway to model the proposed sub-floor structure on computers using the DYCAST finite element code to provide a better understanding of the structure's behavior in testing, and in an actual crash.

Moore, Scott C.↗
NASA NTRS2016

Observational Constraints on the Identification of Shallow Lunar Magmatism: Insights from Floor-Fractured Craters

Floor-fractured craters are a class of lunar crater hypothesized to form in response to the emplacement of a shallow magmatic intrusion beneath the crater floor. The emplacement of a shallow magmatic body should result in a positive Bouguer anomaly relative to unaltered complex craters, a signal which is observed for the average Bouguer anomaly interior to the crater walls. We observe the Bouguer anomaly of floor-fractured craters on an individual basis using the unfiltered Bouguer gravity solution from GRAIL and also a degree 100-600 band-filtered Bouguer gravity solution. The low-magnitude of anomalies arising from shallow magmatic intrusions makes identification using unfiltered Bouguer gravity solutions inconclusive. The observed anomalies in the degree 100-600 Bouguer gravity solution are spatially heterogeneous, although there is spatial correlation between volcanic surface morphologies and positive Bouguer anomalies. We interpret these observations to mean that the spatial heterogeneity observed in the Bouguer signal is the result of variable degrees of magmatic degassing within the intrusions.

Jozwiak, L. M.↗