Search NASA⌕ Search

SEARCH · Search NASA

Results for “nuclear irradiation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Radiation effects on power transistor performance

The D60T, D62T, and D75T transistors in the nuclear reactor were irradiated with bias voltage and high current I sub c vs. V sub ec curves were obtained to evaluate gain degradation at high power levels. Pre- and post-irradiation high current switching tests were performed to evaluate the response. The gamma ray damage work done at Sandia was correlated with the neutron work done at the O.S.U. reactor with the above specified transistors. Theoretical analyses of damage and electrical performance were conducted in terms of semiconductor physics. The experimental high current pulser was improved in order to measure switching time changes which are less than one microsecond at currents of 100 to 200 amperes for in-situ testing.

Frasca, Albert J.↗
NASA NTRS1979

Irradiation pretreatment for coal desulfurization

Process using highly-penetrating nuclear radiation (Beta and Gamma radiation) from nuclear power plant radioactive waste to irradiate coal prior to conventional desulfurization procedures increases total extraction of sulfur.

Hsu, G. C.↗
NASA NTRS1977

Isotopic anomalies and proton irradiation in the early solar system

Nuclear cross sections relevant to the various isotopic-abundance anomalies found in solar-system objects are evaluated in an attempt to set constraints on the hypothesized mechanism of irradiation of forming planetesimals by energetic protons from the young sun. A power-law proton spectrum is adopted, attention is restricted to proton energies less than about 20 MeV, and average cross sections are calculated for several reactions that might be expected to lead to the observed anomalies. The following specific anomalies are examined in detail: Al-26, Na-22, Xe-126, I-129, Kr-80, V-50, Nb-92, La-138, Ta-180, Hg-196, K-40, Ar-36, O-17, O-18, N-15, C-13, Li, Be, and B. It is suggested that the picture of presolar-grain carriers accounts for the facts more naturally than do irradiation models.

Clayton, D. D.↗
NASA NTRS1982

Heat capacities of liquid metals above 1500 K

Heat capacity data are presented for liquid transition metals for temperatures close to the melting point and for 3000, 4000, and 5000 K. The data have been obtained by summarizing the results of levitation, exploding-wire, and drop-calorimetry measurements reported in the literature and by providing analytical estimates where experimental data are not available. The data given here are useful in assigning heat loads and predicting structure survival during extreme temperature excursions caused by nuclear, laser, or particle irradiations.

Margrave, J. L.↗
NASA NTRS1985

The nucleosynthesis of deterium and helium-3

A new model of the creation of D and 3He in supernova of the first generation was considered. It is based on the idea that a supernova event leads simultaneously to acceleration of particles in the shock wave front and to their interactions with supernova atmosphere matter. The D, 3He, Li, Be, B and bypassed isotopes are created in these interactions. The cosmic abundances of the bypassed isotopes with A or = 113 allowed to determine the integral proton flux I sub p (E sub p 25 MeV) = 5 x 10 to the 21/sq cm the spectral index - gamma = 3. The calculations of the D and 3He yields in various nuclear reactions at these irradiation conditions show that only the 4He(p,d)3He reaction leads to cosmic abundances of these isotopes on the assumption that all matter has been exposed.

Lavrukhina, A. K.↗
NASA NTRS2020

NASA GRC Hosts Lattice Confinement Fusion Virtual Workshop

For several years (since 2014) the Advanced Energy Conversion (AEC) Project has examined novel nuclear reactions in materials that absorb large quantities of deuterium fuel tightly held in a lattice. These experiments culminated in a bremsstrahlung irradiation campaign that repeatedly induced nuclear reactions in deuterated metals.

Theresa L Benyo↗
NASA NTRS1972

Radiation damage effects by electrons, protons, and neutrons in Si/Li/ detectors.

The degradation in performance of lithium-compensated silicon nuclear particle detectors induced by irradiation at room temperature with 0.6-MeV and 1.5-MeV electrons, 1.9-MeV protons, and fast neutrons from a plutonium-beryllium source has been investigated. With increasing fluence, the irradiations produced an increase of detector leakage current, noise, capacitance, and a degradation in the performance of the detector as a charged-particle energy spectrometer. Following the irradiations, annealing effects were observed when the detectors were reverse-biased at their recommended operating voltages. Upon removal of bias, a continuous degradation of detector performance characteristics occurred. Detectors which had been damaged by electrons and protons exhibited a stabilization in their characteristics within two weeks after irradiation, whereas detectors damaged by neutrons had a continuous degradation of performance over a period of several months.

Liu, Y. M.↗
NASA NTRS2004

Advanced Radioisotope Power Systems Segmented Thermoelectric Research

Flight times are long; - Need power systems with >15 years life. Mass is at an absolute premium; - Need power systems with high specific power and scalability. 3 orders of magnitude reduction in solar irradiance from Earth to Pluto. Nuclear power sources preferable. The Overall objective is to develop low mass, high efficiency, low-cost Advanced Radioisotope Power System with double the Specific Power and Efficiency over state-of-the-art Radioisotope Thermoelectric Generators (RTGs).

power sources↗
NASA NTRSDate not supplied

Moderator Considerations for Space Nuclear Power and Propulsion Systems

Nuclear reactors have the potential to provide high energy density to enable sustainable surface power and advanced propulsion methods needed for human exploration activities at the moon and mars. Current mission planning is surveying different reactor types for space power and propulsion application. Of these reactor types, the use of a moderator within the reactor can enable reduced enrichment, reduce overall fuel loadings, and minimize the critical size of the reactor compared to unmoderated reference systems. This proceeding summarizes some moderator materials identified for space reactor applications: zirconium hydride, yttrium hydride, beryllium, and beryllium oxide, and the unique design considerations inherent to surface power and nuclear thermal propulsion reactor designs. It was found that there are four key considerations during the moderator selection and design process: nuclear properties, thermophysical & mechanical properties, manufacture & readiness, and environmental compatibility. Surface power reactors can benefit from moderators which minimize overall system mass and are capable of surviving high temperature irradiation environments for years with little degradation. Nuclear thermal propulsion reactors can benefit from moderators which are capable of retaining structural integrity under multiple burns while being exposed to a wide temperature range (40 < T < 500+ K). Moderator materials which exhibit good stability under irradiation and high temperature operation, minimize fuel pitch, and are high readiness are desirable for near term implementation.

nuclear thermal propulsion↗
NASA NTRS1990

Effects Of Dose Rates On Radiation Damage In CMOS Parts

Report describes measurements of effects of ionizing-radiation dose rate on consequent damage to complementary metal oxide/semiconductor (CMOS) electronic devices. Depending on irradiation time and degree of annealing, survivability of devices in outer space, or after explosion of nuclear weapons, enhanced. Annealing involving recovery beyond pre-irradiation conditions (rebound) detrimental. Damage more severe at lower dose rates.

Goben, Charles A.↗
NASA NTRS1993

Interplanetary meteoroid debris in LDEF metal craters

We have examined craters in Al and Au LDEF surfaces to determine the nature of meteoroid residue in the rare cases where projectile material is abundantly preserved in the crater floor. Typical craters contain only small amounts of residue and we find that less than 10 percent of the craters in Al have retained abundant residue consistent with survival of a significant fraction (greater than 20 percent) of the projectile mass. The residue-rich craters can usually be distinguished optically because their interiors are darker than ones with little or no apparent projectile debris. The character of the meteoroid debris in these craters ranges from thin glass liners, to thick vesicular glass containing unmelted mineral fragments, to debris dominated by unmelted mineral fragments. In the best cases of meteoroid survival, unmelted mineral fragments preserve both information on projectile mineralogy as well as other properties such as nuclear tracks caused by solar flare irradiation. The wide range of the observed abundance and alteration state of projectile residue is most probably due to differences in impact velocity. The crater liners are being studied to determine the composition of meteoroids reaching the Earth. The compositional types most commonly seen in the craters are: (1) chondritic (Mg, Si, S, Fe in approximately solar proportions), (2) Mg silicate. amd (3) iron sulfide. These are also the most common compositional types of extraterrestrial particle types collected in the stratosphere. The correlation between these compositions indicates that vapor fractionation was not a major process influencing residue composition in these craters. Although the biases involved with finding analyzable meteoroid debris in metal craters differ from those for extraterrestrial particles collected in and below the atmosphere, there is a common bias favoring particles with low entry velocity. For craters this is very strong and probably all of the metal craters with abundant residue were caused by asteroidal dust impacting at minimum velocities.

Brownlee, D. E.↗