Search NASA⌕ Search

SEARCH · Search NASA

Results for “outgassing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Optical effect of the contamination of infrared windows by the outgassing of materials in outer space

The composition and evaporation rate of the outgassing of a space vehicle thermal control paint as a function of temperature were studied. A contamination chamber was designed, constructed, and tested. Samples of thermal control paint were tested to determine if heating to moderate temperatures causes them to release outgassing products which can be collected on a cooled cesium iodide window for identification by IR analysis. Results showed that outgassing of surfaces other than the sample was a problem. Spectral bands of the deposits collected were compared.

Silberman, E.↗
NASA NTRS1975

Optical effect of the contamination of infrared windows by the outgassing of materials in outer space

The products and kinetics of outgassing from S13G paint were studied by using infrared absorption measurements of the material outgassed (using an evaporation cell and vacuum chamber). Two separate long-term experimental depositions from heated samples of the S13G paint were made. Before each experiment, the vacuum chamber and sample holder were carefully cleaned and outgassed to ensure that subsequent deposits on the colled-window were due only to the products evaporated from the sample. Results of experiments are listed and discussed.

Silberman, E.↗
NASA NTRS1974

Environment of a spacecraft produced by its own outgassing

The effect of material outgassing on the spacecraft internal pressure, on contamination of critical surfaces, on detection of distant weak radiation sources and other problems are discussed. The internal and external outgassing fluxes are examined in relation to their variation with time, temperature, and location. Methods for estimating the total outgassing of a spacecraft are reported. These methods are supported by results obtained in vacuum chamber tests.

Scialdone, J. J.↗
NASA NTRS1976

A new estimate of volatile outgassing on Mars

The presence of 28% argon on Mars, as calculated by Levine and Riegler (1974) and indirectly inferred from Soviet Mars-6 lander data, has important implications for the outgassing history of H2O, CO2, and N2 on Mars. Even if the terrestrial volatile outgassing ratio is only approximately valid for Mars, then large quantities of H2O (of the order of 100,000 g/sq cm), about 10,000 g/sq cm of CO2 (about 1000 times more CO2 than found at present in the Martian atmosphere), and some 450 g/sq cm of N2 may have outgassed over the history of Mars.

Levine, J. S.↗
NASA NTRS1978

One-dimensional outgassing problem

A predominantly numerical study, using the direct-simulation Monte Carlo method, of the flow from outgassing surfaces with plane, cylindrical, or spherical geometry is presented. The numerical results for the plane flow case are compared with existing theoretical and experimental results and also with a new formulation of the jump conditions across the Knudsen layer between the surface and the continuum outflow. This outflow is sonic for the free expansion case but subsonic in the presence of back-pressure effects. The self-scattered return flux is 19% of the outgassed flux in the sonic outflow case and increases at lower Mach numbers. Thermal accomodation and reflection of this return flux produces an outgassing cooling effect. The cylindrical and spherical geometries introduce an additional Knudsen number defined by the ratio of the mean free path in the effusing gas to the radius. The plane flow results apply when this Knudsen number is less than 0.001 and, when it is of order unity or above, the return flux is inversely proportional to it.

Tran Cong, T.↗
NASA NTRS1977

Estimation of outgassing from an expended apogee motor and its effects on spacecraft surfaces

An experimental and theoretical investigation was carried out to evaluate the degradation of the solar cells and other sensitive surfaces of a spacecraft, resulting from the molecular outgassing of an expended solid propellant apogee motor. The motor, following its burnout, is retained by the spacecraft and is a source of gases and particulates which will be released mainly by the unburned propellant-to-casing insulation. The deployment of the solar array within a few minutes after the motor burn results in the interception and reflection to the surfaces of the spacecraft of the molecular outgassing and particulates. Various methods, based on some experimental data, were used to analytically assess the magnitude of the outgassing from the engine.

Scialdone, J. J.↗
NASA NTRS1979

Trends in Materials' Outgassing Technology

Test sample acquisition and chemical analysis techniques for outgassing products from spacecraft, experiment modules, and support equipment is described. The reduction of test data to a computer compatible format to implement materials selection policies is described. A list of the most troublesome outgassing species is given and several materials correlations are discussed. Outgassing from solar panels, thermal blankets, and wire insulation are examined individually.

Colony, J. A.↗
NASA NTRS1982

IUS materials outgassing condensation effects on sensitive spacecraft surfaces

Four materials used on the inertial upper state (IUS) were subjected to vacuum conditions and heated to near-operational temperatures (93 to 316 C), releasing volatile materials. A fraction of the volatile materials were collected on 25 C solar cells, optical solar reflectors (OSR's) or aluminized Mylar. The contaminated surfaces were exposed to 26 equivalent sun hours of simulated solar ultraviolet (UV) radiation. Measurements of contamination deposit mass, structure, reflectance and effects on solar cell power output were made before and after UV irradiation. Standard total mass loss - volatile condensible materials (TML - VCM) tests were also performed. A 2500 A thick contaminant layer produced by EPDM rubber motor-case insulation outgassing increased the solar absorptance of the OSR's from 0.07 to 0.14, and to 0.18 after UV exposure. An 83,000 A layer caused an increase from 0.07 to 0.21, and then the 0.46 after UV exposure. The Kevlar-epoxy motor-case material outgassing condensation raised the absorptance from 0.07 to 0.13, but UV had no effect. Outgassing from multilayer insulation and carbon-carbon nozzle materials did not affect the solar absorptance of the OSR's.

Mullen, C. R.↗
NASA NTRS1984

Atomic-oxygen stimulated outgassing (A0034)

The objective of this experiment is to determine if the impingement of atomic oxygen in near-Earth orbit is a major factor in producing optically damaging outgassed products. The expected results will be to obtain samples which have been exposed to atomic oxygen for long durations. Analysis of these samples will determine if the impingement of atomic oxygen on the thermal control surfaces stimulates a significant amount of outgassed products. This experiment will give a clearer picture of the contamination problem and will assist in assuring that future Shuttle payloads, such as the Space Telescope and High-Energy Astronomy Observatory, will not experience Skylab contamination levels. Selected thermal control surfaces will be exposed to the atomic oxygen in near-Earth orbit. Passive collecting samples will collect any induced outgassing resulting from oxygen impingement. The optical condition of the passive samples will be measured using a ground-based integrating sphere reflectometer and a directional reflectometer.

Scott, R. L., Jr.↗
NASA NTRS1986

Optimization of outgassing bake-out temperatures and duration of space systems

Satellite components, e.g., solar panels, were subjected to bake-out tests to model outgassing characteristics and to identify methods for minimizing the bake-out time. Bake-out removes gases and particulates that are trapped at the surfaces of components during manufacture, storage, transit and handling. The tests covered temperatures from 45-85 C for up to 200 hr. Measurements of the mass loss rates were used to model the process as a function of the temperature, time and mass. Data sampling with a quartz crystal microbalance was found to be an effective means for ascertaining the mass loss rate and the activation energy of the release. The tests showed that the duration of the bake-out depends on the amount of material which must be removed and the type of outgassing which occurs. Materials which are resistant to high temperatures can be baked at the highest feasible temperatures to accelerate the outgassing process.

John Scialdone↗
NASA NTRS1988

The behavior of outgassed materials in thermal vacuums

Scientists at the NASA White Sands Test Facility (WSTF) are investigating the relationship between outgassing and condensation for aerospace materials in space-like environments. The WSTF throughput test method was validated by previous testing at WSTF using palmitic acid. Data from these tests were compared with data from other preliminary tests by using adipic and behenic acids. The comparison indicates that surface forces between outgassed molecules and the condensing surfaces cause the condensation flux to be different from the incident flux. These forces can also cause the evaporative flux to be different from the expected value. These discrepancies are discussed in terms of both potential and dynamic interactions of outgassed molecules with surfaces. Although these surface forces are noticeable, their overall effect on the test is minimal.

Mahone, William↗
NASA NTRS1990

An outgassing release factor for nonradiogenic volatiles on Mars

The outgassing release factor for nonradiogenic volatiles (such as water) on Mars since the end of accretion is calculated using the current value of the Ar-40 release factor and a correction coefficient derived from the history of volcanism on Mars. The Ar-40 release factor is calculated from the bulk K content of the planet and its current atmospheric inventory of Ar-40. The correction coefficient compensates for the variable abundance of Ar-40 in the Martian mantle through time versus the relatively constant nonradiogenic volatile abundance, and for the variable rate at which outgassing has occurred on Mars. The results yield a nonradiogenic release coefficient between 1.4 and 2.8. The outgassing release factor for nonradiogenic volatiles is calculated to be between 0.017 and 0.112.

Scambos, Ted A.↗
NASA NTRS1991

Atomic oxygen stimulated outgassing

The passive Long Duration Exposure Facility (LDEF) Experiment A0034, Atomic Oxygen Simulated Outgassing, consisted of two identical one-sixth tray modules, exposing selected thermal control coatings to atomic oxygen and the combined space environment on the leading edge and, for reference, to the relative wake environment on the trailing edge. Optical mirrors were included adjacent to the thermal coatings for deposition of outgassing products. Ultraviolet grade windows and metal covers were provided for additional assessment of the effects of the various environmental factors. Preliminary results indicate that orbital atomic oxygen is both a degrading and a optically restorative factor in the thermo-optical properties of selected thermal coatings. There is evidence of more severe optical degradation on collector mirrors adjacent to coatings that were exposed to the RAM-impinging atomic oxygen. This evidence of atomic oxygen stimulated outgassing is discussed in relation to alternative factors that could affect degradation. The general effects of the space environment on the experiment hardware as well as the specimens are discussed.

Linton, Roger C.↗
NASA NTRS1992

LDEF experiment A0034: Atomic oxygen stimulated outgassing

The passive Long Duration Exposure Facility (LDEF) Experiment A0034, 'Atomic Oxygen Stimulated Outgassing', consisted of two identical one-sixth tray modules, exposing selected thermal control coatings to atomic oxygen and the combined space environment on the leading edge, and for reference, to the relative 'wake' environment of the trailing edge. Optical mirrors were included adjacent to the thermal coatings for deposition of the outgassing products. Ultraviolet grade windows and metal covers were provided for additional assessment of the effects of various environmental factors. Preliminary results indicate that orbital atomic oxygen is both a degrading and optically restorative factor in the thermo-optical properties of selected thermal coatings. There is evidence of more severe optical degradation on collector mirrors adjacent to coatings that were exposed to RAM-impinging atomic oxygen. This evidence of atomic oxygen stimulated outgassing is discussed in relation to alternative factors that could affect degradation. The general effects of the space environment on the experiment hardware as well as the specimens are discussed.

Linton, Roger C.↗
NASA NTRS1993

Outgassing and dimensional changes of polymer matrix composites in space

A thermal-vacuum outgassing model and test protocol for predicting outgassing times and dimensional changes for polymer matrix composites is described. Experimental results derived from a 'control' sample are used to provide the basis for analytical predictions to compare with the outgassing response of Long Duration Exposure Facility (LDEF) flight samples.

Tennyson, R. C.↗
NASA NTRS1993

Wet inside and out? Constraints on water in the Martian mantle and on outgassed water, based on melt inclusions in SNC meteorites

Constraints on the volatile inventory and outgassing history of Mars are critical to understanding the origin of ancient valley systems and paleoclimates. Planetary accretion models for Mars allow either a volatile-rich or volatile-poor mantle, depending on whether the accreted materials were fully oxidized or whether accretion was homogeneous so that water was lost through reaction with metallic iron. The amount of water that has been outgassed from the interior is likewise a contentious subject, and estimates of globally distributed water based on various geochemical and geological measurements vary from a few meters to more than a thousand meters. New data on SNC meteorites, which are thought to be Martian igneous rocks, provide constraints on both mantle and outgassed water.

Mcsween, H. Y., Jr.↗
NASA NTRS1993

Outgassing Data for Selecting Spacecraft Materials

This tenth compilation of outgassing data of materials intended for spacecraft use supersedes Reference Publication 1124, Revision 2, November 1990. The data were obtained at the Goddard Space Flight Center (GSFC), utilizing equipment developed at Stanford Research Institute (SRI) under contract to the Jet Propulsion Laboratory (JPL). SRI personnel developed an apparatus for determining the mass loss in vacuum and for collecting the outgassed products. The outgassing data have been presented in three different ways in order to facilitate material selection. In Section A, the materials are divided by category into the 18 probable uses, such as adhesives, greases, paints, potting compounds, and so forth. In Section B, all the materials contained in Section A are listed in alphabetical order by the manufacturer's identification. In Section C, the only materials listed are those having 'Total Mass Loss' (TML) and Collected Volatile Condensable Materials (CVCM) equal to or lower than a maximum 1.0 percent TML and a maximum 0.10 percent CVCM. These are grouped by use, as in Section A.

Campbell, William A., Jr.↗
NASA NTRS1995

Outgassing products from orbiter TPS materials

The Space Transportation System (STS) orbiters are known to be significant sources of outgassing in low earth orbit (LEO). Infrared and mass spectra of residues and outgassing from orbiter thermal protection tile and an external blanket are presented. Several sources of methyl and phenyl methyl silicones are identified. About fifty pounds of silicones are estimated to be outgassed during an STS mission.

Harvey, Gale A.↗